| /* | 
 |     btaudio - bt878 audio dma driver for linux 2.4.x | 
 |  | 
 |     (c) 2000-2002 Gerd Knorr <kraxel@bytesex.org> | 
 |  | 
 |     This program is free software; you can redistribute it and/or modify | 
 |     it under the terms of the GNU General Public License as published by | 
 |     the Free Software Foundation; either version 2 of the License, or | 
 |     (at your option) any later version. | 
 |  | 
 |     This program is distributed in the hope that it will be useful, | 
 |     but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |     GNU General Public License for more details. | 
 |  | 
 |     You should have received a copy of the GNU General Public License | 
 |     along with this program; if not, write to the Free Software | 
 |     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
 |  | 
 | */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/pci.h> | 
 | #include <linux/sched.h> | 
 | #include <linux/signal.h> | 
 | #include <linux/types.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/init.h> | 
 | #include <linux/poll.h> | 
 | #include <linux/sound.h> | 
 | #include <linux/soundcard.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/kdev_t.h> | 
 | #include <linux/mutex.h> | 
 |  | 
 | #include <asm/uaccess.h> | 
 | #include <asm/io.h> | 
 |  | 
 |  | 
 | /* mmio access */ | 
 | #define btwrite(dat,adr)    writel((dat), (bta->mmio+(adr))) | 
 | #define btread(adr)         readl(bta->mmio+(adr)) | 
 |  | 
 | #define btand(dat,adr)      btwrite((dat) & btread(adr), adr) | 
 | #define btor(dat,adr)       btwrite((dat) | btread(adr), adr) | 
 | #define btaor(dat,mask,adr) btwrite((dat) | ((mask) & btread(adr)), adr) | 
 |  | 
 | /* registers (shifted because bta->mmio is long) */ | 
 | #define REG_INT_STAT      (0x100 >> 2) | 
 | #define REG_INT_MASK      (0x104 >> 2) | 
 | #define REG_GPIO_DMA_CTL  (0x10c >> 2) | 
 | #define REG_PACKET_LEN    (0x110 >> 2) | 
 | #define REG_RISC_STRT_ADD (0x114 >> 2) | 
 | #define REG_RISC_COUNT    (0x120 >> 2) | 
 |  | 
 | /* IRQ bits - REG_INT_(STAT|MASK) */ | 
 | #define IRQ_SCERR         (1 << 19) | 
 | #define IRQ_OCERR         (1 << 18) | 
 | #define IRQ_PABORT        (1 << 17) | 
 | #define IRQ_RIPERR        (1 << 16) | 
 | #define IRQ_PPERR         (1 << 15) | 
 | #define IRQ_FDSR          (1 << 14) | 
 | #define IRQ_FTRGT         (1 << 13) | 
 | #define IRQ_FBUS          (1 << 12) | 
 | #define IRQ_RISCI         (1 << 11) | 
 | #define IRQ_OFLOW         (1 <<  3) | 
 |  | 
 | #define IRQ_BTAUDIO       (IRQ_SCERR | IRQ_OCERR | IRQ_PABORT | IRQ_RIPERR |\ | 
 | 			   IRQ_PPERR | IRQ_FDSR  | IRQ_FTRGT  | IRQ_FBUS   |\ | 
 | 			   IRQ_RISCI) | 
 |  | 
 | /* REG_GPIO_DMA_CTL bits */ | 
 | #define DMA_CTL_A_PWRDN   (1 << 26) | 
 | #define DMA_CTL_DA_SBR    (1 << 14) | 
 | #define DMA_CTL_DA_ES2    (1 << 13) | 
 | #define DMA_CTL_ACAP_EN   (1 <<  4) | 
 | #define DMA_CTL_RISC_EN   (1 <<  1) | 
 | #define DMA_CTL_FIFO_EN   (1 <<  0) | 
 |  | 
 | /* RISC instructions */ | 
 | #define RISC_WRITE        (0x01 << 28) | 
 | #define RISC_JUMP         (0x07 << 28) | 
 | #define RISC_SYNC         (0x08 << 28) | 
 |  | 
 | /* RISC bits */ | 
 | #define RISC_WR_SOL       (1 << 27) | 
 | #define RISC_WR_EOL       (1 << 26) | 
 | #define RISC_IRQ          (1 << 24) | 
 | #define RISC_SYNC_RESYNC  (1 << 15) | 
 | #define RISC_SYNC_FM1     0x06 | 
 | #define RISC_SYNC_VRO     0x0c | 
 |  | 
 | #define HWBASE_AD (448000) | 
 |  | 
 | /* -------------------------------------------------------------- */ | 
 |  | 
 | struct btaudio { | 
 | 	/* linked list */ | 
 | 	struct btaudio *next; | 
 |  | 
 | 	/* device info */ | 
 | 	int            dsp_digital; | 
 | 	int            dsp_analog; | 
 | 	int            mixer_dev; | 
 | 	struct pci_dev *pci; | 
 | 	unsigned int   irq; | 
 | 	unsigned long  mem; | 
 | 	unsigned long  __iomem *mmio; | 
 |  | 
 | 	/* locking */ | 
 | 	int            users; | 
 | 	struct mutex lock; | 
 |  | 
 | 	/* risc instructions */ | 
 | 	unsigned int   risc_size; | 
 | 	unsigned long  *risc_cpu; | 
 | 	dma_addr_t     risc_dma; | 
 |  | 
 | 	/* audio data */ | 
 | 	unsigned int   buf_size; | 
 | 	unsigned char  *buf_cpu; | 
 | 	dma_addr_t     buf_dma; | 
 |  | 
 | 	/* buffer setup */ | 
 | 	int line_bytes; | 
 | 	int line_count; | 
 | 	int block_bytes; | 
 | 	int block_count; | 
 |  | 
 | 	/* read fifo management */ | 
 | 	int recording; | 
 | 	int dma_block; | 
 | 	int read_offset; | 
 | 	int read_count; | 
 | 	wait_queue_head_t readq; | 
 |  | 
 | 	/* settings */ | 
 | 	int gain[3]; | 
 | 	int source; | 
 | 	int bits; | 
 | 	int decimation; | 
 | 	int mixcount; | 
 | 	int sampleshift; | 
 | 	int channels; | 
 | 	int analog; | 
 | 	int rate; | 
 | }; | 
 |  | 
 | struct cardinfo { | 
 | 	char *name; | 
 | 	int rate; | 
 | }; | 
 |  | 
 | static struct btaudio *btaudios; | 
 | static unsigned int debug; | 
 | static unsigned int irq_debug; | 
 |  | 
 | /* -------------------------------------------------------------- */ | 
 |  | 
 | #define BUF_DEFAULT 128*1024 | 
 | #define BUF_MIN         8192 | 
 |  | 
 | static int alloc_buffer(struct btaudio *bta) | 
 | { | 
 | 	if (NULL == bta->buf_cpu) { | 
 | 		for (bta->buf_size = BUF_DEFAULT; bta->buf_size >= BUF_MIN; | 
 | 		     bta->buf_size = bta->buf_size >> 1) { | 
 | 			bta->buf_cpu = pci_alloc_consistent | 
 | 				(bta->pci, bta->buf_size, &bta->buf_dma); | 
 | 			if (NULL != bta->buf_cpu) | 
 | 				break; | 
 | 		} | 
 | 		if (NULL == bta->buf_cpu) | 
 | 			return -ENOMEM; | 
 | 		memset(bta->buf_cpu,0,bta->buf_size); | 
 | 	} | 
 | 	if (NULL == bta->risc_cpu) { | 
 | 		bta->risc_size = PAGE_SIZE; | 
 | 		bta->risc_cpu = pci_alloc_consistent | 
 | 			(bta->pci, bta->risc_size, &bta->risc_dma); | 
 | 		if (NULL == bta->risc_cpu) { | 
 | 			pci_free_consistent(bta->pci, bta->buf_size, bta->buf_cpu, bta->buf_dma); | 
 | 			bta->buf_cpu = NULL; | 
 | 			return -ENOMEM; | 
 | 		} | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void free_buffer(struct btaudio *bta) | 
 | { | 
 | 	if (NULL != bta->buf_cpu) { | 
 | 		pci_free_consistent(bta->pci, bta->buf_size, | 
 | 				    bta->buf_cpu, bta->buf_dma); | 
 | 		bta->buf_cpu = NULL; | 
 | 	} | 
 | 	if (NULL != bta->risc_cpu) { | 
 | 		pci_free_consistent(bta->pci, bta->risc_size, | 
 | 				    bta->risc_cpu, bta->risc_dma); | 
 | 		bta->risc_cpu = NULL; | 
 | 	} | 
 | } | 
 |  | 
 | static int make_risc(struct btaudio *bta) | 
 | { | 
 | 	int rp, bp, line, block; | 
 | 	unsigned long risc; | 
 |  | 
 | 	bta->block_bytes = bta->buf_size >> 4; | 
 | 	bta->block_count = 1 << 4; | 
 | 	bta->line_bytes  = bta->block_bytes; | 
 | 	bta->line_count  = bta->block_count; | 
 | 	while (bta->line_bytes > 4095) { | 
 | 		bta->line_bytes >>= 1; | 
 | 		bta->line_count <<= 1; | 
 | 	} | 
 | 	if (bta->line_count > 255) | 
 | 		return -EINVAL; | 
 | 	if (debug) | 
 | 		printk(KERN_DEBUG | 
 | 		       "btaudio: bufsize=%d - bs=%d bc=%d - ls=%d, lc=%d\n", | 
 | 		       bta->buf_size,bta->block_bytes,bta->block_count, | 
 | 		       bta->line_bytes,bta->line_count); | 
 |         rp = 0; bp = 0; | 
 | 	block = 0; | 
 | 	bta->risc_cpu[rp++] = cpu_to_le32(RISC_SYNC|RISC_SYNC_FM1); | 
 | 	bta->risc_cpu[rp++] = cpu_to_le32(0); | 
 | 	for (line = 0; line < bta->line_count; line++) { | 
 | 		risc  = RISC_WRITE | RISC_WR_SOL | RISC_WR_EOL; | 
 | 		risc |= bta->line_bytes; | 
 | 		if (0 == (bp & (bta->block_bytes-1))) { | 
 | 			risc |= RISC_IRQ; | 
 | 			risc |= (block  & 0x0f) << 16; | 
 | 			risc |= (~block & 0x0f) << 20; | 
 | 			block++; | 
 | 		} | 
 | 		bta->risc_cpu[rp++] = cpu_to_le32(risc); | 
 | 		bta->risc_cpu[rp++] = cpu_to_le32(bta->buf_dma + bp); | 
 | 		bp += bta->line_bytes; | 
 | 	} | 
 | 	bta->risc_cpu[rp++] = cpu_to_le32(RISC_SYNC|RISC_SYNC_VRO); | 
 | 	bta->risc_cpu[rp++] = cpu_to_le32(0); | 
 | 	bta->risc_cpu[rp++] = cpu_to_le32(RISC_JUMP);  | 
 | 	bta->risc_cpu[rp++] = cpu_to_le32(bta->risc_dma); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int start_recording(struct btaudio *bta) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	if (0 != (ret = alloc_buffer(bta))) | 
 | 		return ret; | 
 | 	if (0 != (ret = make_risc(bta))) | 
 | 		return ret; | 
 |  | 
 | 	btwrite(bta->risc_dma, REG_RISC_STRT_ADD); | 
 | 	btwrite((bta->line_count << 16) | bta->line_bytes, | 
 | 		REG_PACKET_LEN); | 
 | 	btwrite(IRQ_BTAUDIO, REG_INT_MASK); | 
 | 	if (bta->analog) { | 
 | 		btwrite(DMA_CTL_ACAP_EN | | 
 | 			DMA_CTL_RISC_EN | | 
 | 			DMA_CTL_FIFO_EN | | 
 | 			DMA_CTL_DA_ES2  | | 
 | 			((bta->bits == 8) ? DMA_CTL_DA_SBR : 0) | | 
 | 			(bta->gain[bta->source] << 28) | | 
 | 			(bta->source            << 24) | | 
 | 			(bta->decimation        <<  8), | 
 | 			REG_GPIO_DMA_CTL); | 
 | 	} else { | 
 | 		btwrite(DMA_CTL_ACAP_EN | | 
 | 			DMA_CTL_RISC_EN | | 
 | 			DMA_CTL_FIFO_EN | | 
 | 			DMA_CTL_DA_ES2  | | 
 | 			DMA_CTL_A_PWRDN | | 
 | 			(1 << 6)   | | 
 | 			((bta->bits == 8) ? DMA_CTL_DA_SBR : 0) | | 
 | 			(bta->gain[bta->source] << 28) | | 
 | 			(bta->source            << 24) | | 
 | 			(bta->decimation        <<  8), | 
 | 			REG_GPIO_DMA_CTL); | 
 | 	} | 
 | 	bta->dma_block = 0; | 
 | 	bta->read_offset = 0; | 
 | 	bta->read_count = 0; | 
 | 	bta->recording = 1; | 
 | 	if (debug) | 
 | 		printk(KERN_DEBUG "btaudio: recording started\n"); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void stop_recording(struct btaudio *bta) | 
 | { | 
 |         btand(~15, REG_GPIO_DMA_CTL); | 
 | 	bta->recording = 0; | 
 | 	if (debug) | 
 | 		printk(KERN_DEBUG "btaudio: recording stopped\n"); | 
 | } | 
 |  | 
 |  | 
 | /* -------------------------------------------------------------- */ | 
 |  | 
 | static int btaudio_mixer_open(struct inode *inode, struct file *file) | 
 | { | 
 | 	int minor = iminor(inode); | 
 | 	struct btaudio *bta; | 
 |  | 
 | 	for (bta = btaudios; bta != NULL; bta = bta->next) | 
 | 		if (bta->mixer_dev == minor) | 
 | 			break; | 
 | 	if (NULL == bta) | 
 | 		return -ENODEV; | 
 |  | 
 | 	if (debug) | 
 | 		printk("btaudio: open mixer [%d]\n",minor); | 
 | 	file->private_data = bta; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int btaudio_mixer_release(struct inode *inode, struct file *file) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int btaudio_mixer_ioctl(struct inode *inode, struct file *file, | 
 | 			       unsigned int cmd, unsigned long arg) | 
 | { | 
 | 	struct btaudio *bta = file->private_data; | 
 | 	int ret,val=0,i=0; | 
 | 	void __user *argp = (void __user *)arg; | 
 |  | 
 | 	if (cmd == SOUND_MIXER_INFO) { | 
 | 		mixer_info info; | 
 | 		memset(&info,0,sizeof(info)); | 
 |                 strlcpy(info.id,"bt878",sizeof(info.id)); | 
 |                 strlcpy(info.name,"Brooktree Bt878 audio",sizeof(info.name)); | 
 |                 info.modify_counter = bta->mixcount; | 
 |                 if (copy_to_user(argp, &info, sizeof(info))) | 
 |                         return -EFAULT; | 
 | 		return 0; | 
 | 	} | 
 | 	if (cmd == SOUND_OLD_MIXER_INFO) { | 
 | 		_old_mixer_info info; | 
 | 		memset(&info,0,sizeof(info)); | 
 |                 strlcpy(info.id,"bt878",sizeof(info.id)-1); | 
 |                 strlcpy(info.name,"Brooktree Bt878 audio",sizeof(info.name)); | 
 |                 if (copy_to_user(argp, &info, sizeof(info))) | 
 |                         return -EFAULT; | 
 | 		return 0; | 
 | 	} | 
 | 	if (cmd == OSS_GETVERSION) | 
 | 		return put_user(SOUND_VERSION, (int __user *)argp); | 
 |  | 
 | 	/* read */ | 
 | 	if (_SIOC_DIR(cmd) & _SIOC_WRITE) | 
 | 		if (get_user(val, (int __user *)argp)) | 
 | 			return -EFAULT; | 
 |  | 
 | 	switch (cmd) { | 
 | 	case MIXER_READ(SOUND_MIXER_CAPS): | 
 | 		ret = SOUND_CAP_EXCL_INPUT; | 
 | 		break; | 
 | 	case MIXER_READ(SOUND_MIXER_STEREODEVS): | 
 | 		ret = 0; | 
 | 		break; | 
 | 	case MIXER_READ(SOUND_MIXER_RECMASK): | 
 | 	case MIXER_READ(SOUND_MIXER_DEVMASK): | 
 | 		ret = SOUND_MASK_LINE1|SOUND_MASK_LINE2|SOUND_MASK_LINE3; | 
 | 		break; | 
 |  | 
 | 	case MIXER_WRITE(SOUND_MIXER_RECSRC): | 
 | 		if (val & SOUND_MASK_LINE1 && bta->source != 0) | 
 | 			bta->source = 0; | 
 | 		else if (val & SOUND_MASK_LINE2 && bta->source != 1) | 
 | 			bta->source = 1; | 
 | 		else if (val & SOUND_MASK_LINE3 && bta->source != 2) | 
 | 			bta->source = 2; | 
 | 		btaor((bta->gain[bta->source] << 28) | | 
 | 		      (bta->source            << 24), | 
 | 		      0x0cffffff, REG_GPIO_DMA_CTL); | 
 | 	case MIXER_READ(SOUND_MIXER_RECSRC): | 
 | 		switch (bta->source) { | 
 | 		case 0:  ret = SOUND_MASK_LINE1; break; | 
 | 		case 1:  ret = SOUND_MASK_LINE2; break; | 
 | 		case 2:  ret = SOUND_MASK_LINE3; break; | 
 | 		default: ret = 0; | 
 | 		} | 
 | 		break; | 
 |  | 
 | 	case MIXER_WRITE(SOUND_MIXER_LINE1): | 
 | 	case MIXER_WRITE(SOUND_MIXER_LINE2): | 
 | 	case MIXER_WRITE(SOUND_MIXER_LINE3): | 
 | 		if (MIXER_WRITE(SOUND_MIXER_LINE1) == cmd) | 
 | 			i = 0; | 
 | 		if (MIXER_WRITE(SOUND_MIXER_LINE2) == cmd) | 
 | 			i = 1; | 
 | 		if (MIXER_WRITE(SOUND_MIXER_LINE3) == cmd) | 
 | 			i = 2; | 
 | 		bta->gain[i] = (val & 0xff) * 15 / 100; | 
 | 		if (bta->gain[i] > 15) bta->gain[i] = 15; | 
 | 		if (bta->gain[i] <  0) bta->gain[i] =  0; | 
 | 		if (i == bta->source) | 
 | 			btaor((bta->gain[bta->source]<<28), | 
 | 			      0x0fffffff, REG_GPIO_DMA_CTL); | 
 | 		ret  = bta->gain[i] * 100 / 15; | 
 | 		ret |= ret << 8; | 
 | 		break; | 
 |  | 
 | 	case MIXER_READ(SOUND_MIXER_LINE1): | 
 | 	case MIXER_READ(SOUND_MIXER_LINE2): | 
 | 	case MIXER_READ(SOUND_MIXER_LINE3): | 
 | 		if (MIXER_READ(SOUND_MIXER_LINE1) == cmd) | 
 | 			i = 0; | 
 | 		if (MIXER_READ(SOUND_MIXER_LINE2) == cmd) | 
 | 			i = 1; | 
 | 		if (MIXER_READ(SOUND_MIXER_LINE3) == cmd) | 
 | 			i = 2; | 
 | 		ret  = bta->gain[i] * 100 / 15; | 
 | 		ret |= ret << 8; | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	if (put_user(ret, (int __user *)argp)) | 
 | 		return -EFAULT; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct file_operations btaudio_mixer_fops = { | 
 | 	.owner		= THIS_MODULE, | 
 | 	.llseek		= no_llseek, | 
 | 	.open		= btaudio_mixer_open, | 
 | 	.release	= btaudio_mixer_release, | 
 | 	.ioctl		= btaudio_mixer_ioctl, | 
 | }; | 
 |  | 
 | /* -------------------------------------------------------------- */ | 
 |  | 
 | static int btaudio_dsp_open(struct inode *inode, struct file *file, | 
 | 			    struct btaudio *bta, int analog) | 
 | { | 
 | 	mutex_lock(&bta->lock); | 
 | 	if (bta->users) | 
 | 		goto busy; | 
 | 	bta->users++; | 
 | 	file->private_data = bta; | 
 |  | 
 | 	bta->analog = analog; | 
 | 	bta->dma_block = 0; | 
 | 	bta->read_offset = 0; | 
 | 	bta->read_count = 0; | 
 | 	bta->sampleshift = 0; | 
 |  | 
 | 	mutex_unlock(&bta->lock); | 
 | 	return 0; | 
 |  | 
 |  busy: | 
 | 	mutex_unlock(&bta->lock); | 
 | 	return -EBUSY; | 
 | } | 
 |  | 
 | static int btaudio_dsp_open_digital(struct inode *inode, struct file *file) | 
 | { | 
 | 	int minor = iminor(inode); | 
 | 	struct btaudio *bta; | 
 |  | 
 | 	for (bta = btaudios; bta != NULL; bta = bta->next) | 
 | 		if (bta->dsp_digital == minor) | 
 | 			break; | 
 | 	if (NULL == bta) | 
 | 		return -ENODEV; | 
 | 	 | 
 | 	if (debug) | 
 | 		printk("btaudio: open digital dsp [%d]\n",minor); | 
 | 	return btaudio_dsp_open(inode,file,bta,0); | 
 | } | 
 |  | 
 | static int btaudio_dsp_open_analog(struct inode *inode, struct file *file) | 
 | { | 
 | 	int minor = iminor(inode); | 
 | 	struct btaudio *bta; | 
 |  | 
 | 	for (bta = btaudios; bta != NULL; bta = bta->next) | 
 | 		if (bta->dsp_analog == minor) | 
 | 			break; | 
 | 	if (NULL == bta) | 
 | 		return -ENODEV; | 
 |  | 
 | 	if (debug) | 
 | 		printk("btaudio: open analog dsp [%d]\n",minor); | 
 | 	return btaudio_dsp_open(inode,file,bta,1); | 
 | } | 
 |  | 
 | static int btaudio_dsp_release(struct inode *inode, struct file *file) | 
 | { | 
 | 	struct btaudio *bta = file->private_data; | 
 |  | 
 | 	mutex_lock(&bta->lock); | 
 | 	if (bta->recording) | 
 | 		stop_recording(bta); | 
 | 	bta->users--; | 
 | 	mutex_unlock(&bta->lock); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static ssize_t btaudio_dsp_read(struct file *file, char __user *buffer, | 
 | 				size_t swcount, loff_t *ppos) | 
 | { | 
 | 	struct btaudio *bta = file->private_data; | 
 | 	int hwcount = swcount << bta->sampleshift; | 
 | 	int nsrc, ndst, err, ret = 0; | 
 | 	DECLARE_WAITQUEUE(wait, current); | 
 |  | 
 | 	add_wait_queue(&bta->readq, &wait); | 
 | 	mutex_lock(&bta->lock); | 
 | 	while (swcount > 0) { | 
 | 		if (0 == bta->read_count) { | 
 | 			if (!bta->recording) { | 
 | 				if (0 != (err = start_recording(bta))) { | 
 | 					if (0 == ret) | 
 | 						ret = err; | 
 | 					break; | 
 | 				} | 
 | 			} | 
 | 			if (file->f_flags & O_NONBLOCK) { | 
 | 				if (0 == ret) | 
 | 					ret = -EAGAIN; | 
 | 				break; | 
 | 			} | 
 | 			mutex_unlock(&bta->lock); | 
 | 			current->state = TASK_INTERRUPTIBLE; | 
 | 			schedule(); | 
 | 			mutex_lock(&bta->lock); | 
 | 			if(signal_pending(current)) { | 
 | 				if (0 == ret) | 
 | 					ret = -EINTR; | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 		nsrc = (bta->read_count < hwcount) ? bta->read_count : hwcount; | 
 | 		if (nsrc > bta->buf_size - bta->read_offset) | 
 | 			nsrc = bta->buf_size - bta->read_offset; | 
 | 		ndst = nsrc >> bta->sampleshift; | 
 | 		 | 
 | 		if ((bta->analog  && 0 == bta->sampleshift) || | 
 | 		    (!bta->analog && 2 == bta->channels)) { | 
 | 			/* just copy */ | 
 | 			if (copy_to_user(buffer + ret, bta->buf_cpu + bta->read_offset, nsrc)) { | 
 | 				if (0 == ret) | 
 | 					ret = -EFAULT; | 
 | 				break; | 
 | 			} | 
 |  | 
 | 		} else if (!bta->analog) { | 
 | 			/* stereo => mono (digital audio) */ | 
 | 			__s16 *src = (__s16*)(bta->buf_cpu + bta->read_offset); | 
 | 			__s16 __user *dst = (__s16 __user *)(buffer + ret); | 
 | 			__s16 avg; | 
 | 			int n = ndst>>1; | 
 | 			if (!access_ok(VERIFY_WRITE, dst, ndst)) { | 
 | 				if (0 == ret) | 
 | 					ret = -EFAULT; | 
 | 				break; | 
 | 			} | 
 | 			for (; n; n--, dst++) { | 
 | 				avg  = (__s16)le16_to_cpu(*src) / 2; src++; | 
 | 				avg += (__s16)le16_to_cpu(*src) / 2; src++; | 
 | 				__put_user(cpu_to_le16(avg),dst); | 
 | 			} | 
 |  | 
 | 		} else if (8 == bta->bits) { | 
 | 			/* copy + byte downsampling (audio A/D) */ | 
 | 			__u8 *src = bta->buf_cpu + bta->read_offset; | 
 | 			__u8 __user *dst = buffer + ret; | 
 | 			int n = ndst; | 
 | 			if (!access_ok(VERIFY_WRITE, dst, ndst)) { | 
 | 				if (0 == ret) | 
 | 					ret = -EFAULT; | 
 | 				break; | 
 | 			} | 
 | 			for (; n; n--, src += (1 << bta->sampleshift), dst++) | 
 | 				__put_user(*src, dst); | 
 |  | 
 | 		} else { | 
 | 			/* copy + word downsampling (audio A/D) */ | 
 | 			__u16 *src = (__u16*)(bta->buf_cpu + bta->read_offset); | 
 | 			__u16 __user *dst = (__u16 __user *)(buffer + ret); | 
 | 			int n = ndst>>1; | 
 | 			if (!access_ok(VERIFY_WRITE,dst,ndst)) { | 
 | 				if (0 == ret) | 
 | 					ret = -EFAULT; | 
 | 				break; | 
 | 			} | 
 | 			for (; n; n--, src += (1 << bta->sampleshift), dst++) | 
 | 				__put_user(*src, dst); | 
 | 		} | 
 |  | 
 | 		ret     += ndst; | 
 | 		swcount -= ndst; | 
 | 		hwcount -= nsrc; | 
 | 		bta->read_count  -= nsrc; | 
 | 		bta->read_offset += nsrc; | 
 | 		if (bta->read_offset == bta->buf_size) | 
 | 			bta->read_offset = 0; | 
 | 	} | 
 | 	mutex_unlock(&bta->lock); | 
 | 	remove_wait_queue(&bta->readq, &wait); | 
 | 	current->state = TASK_RUNNING; | 
 | 	return ret; | 
 | } | 
 |  | 
 | static ssize_t btaudio_dsp_write(struct file *file, const char __user *buffer, | 
 | 				 size_t count, loff_t *ppos) | 
 | { | 
 | 	return -EINVAL; | 
 | } | 
 |  | 
 | static int btaudio_dsp_ioctl(struct inode *inode, struct file *file, | 
 | 			     unsigned int cmd, unsigned long arg) | 
 | { | 
 | 	struct btaudio *bta = file->private_data; | 
 | 	int s, i, ret, val = 0; | 
 | 	void __user *argp = (void __user *)arg; | 
 | 	int __user *p = argp; | 
 | 	 | 
 |         switch (cmd) { | 
 |         case OSS_GETVERSION: | 
 |                 return put_user(SOUND_VERSION, p); | 
 |         case SNDCTL_DSP_GETCAPS: | 
 | 		return 0; | 
 |  | 
 |         case SNDCTL_DSP_SPEED: | 
 | 		if (get_user(val, p)) | 
 | 			return -EFAULT; | 
 | 		if (bta->analog) { | 
 | 			for (s = 0; s < 16; s++) | 
 | 				if (val << s >= HWBASE_AD*4/15) | 
 | 					break; | 
 | 			for (i = 15; i >= 5; i--) | 
 | 				if (val << s <= HWBASE_AD*4/i) | 
 | 					break; | 
 | 			bta->sampleshift = s; | 
 | 			bta->decimation  = i; | 
 | 			if (debug) | 
 | 				printk(KERN_DEBUG "btaudio: rate: req=%d  " | 
 | 				       "dec=%d shift=%d hwrate=%d swrate=%d\n", | 
 | 				       val,i,s,(HWBASE_AD*4/i),(HWBASE_AD*4/i)>>s); | 
 | 		} else { | 
 | 			bta->sampleshift = (bta->channels == 2) ? 0 : 1; | 
 | 			bta->decimation  = 0; | 
 | 		} | 
 | 		if (bta->recording) { | 
 | 			mutex_lock(&bta->lock); | 
 | 			stop_recording(bta); | 
 | 			start_recording(bta); | 
 | 			mutex_unlock(&bta->lock); | 
 | 		} | 
 | 		/* fall through */ | 
 |         case SOUND_PCM_READ_RATE: | 
 | 		if (bta->analog) { | 
 | 			return put_user(HWBASE_AD*4/bta->decimation>>bta->sampleshift, p); | 
 | 		} else { | 
 | 			return put_user(bta->rate, p); | 
 | 		} | 
 |  | 
 |         case SNDCTL_DSP_STEREO: | 
 | 		if (!bta->analog) { | 
 | 			if (get_user(val, p)) | 
 | 				return -EFAULT; | 
 | 			bta->channels    = (val > 0) ? 2 : 1; | 
 | 			bta->sampleshift = (bta->channels == 2) ? 0 : 1; | 
 | 			if (debug) | 
 | 				printk(KERN_INFO | 
 | 				       "btaudio: stereo=%d channels=%d\n", | 
 | 				       val,bta->channels); | 
 | 		} else { | 
 | 			if (val == 1) | 
 | 				return -EFAULT; | 
 | 			else { | 
 | 				bta->channels = 1; | 
 | 				if (debug) | 
 | 					printk(KERN_INFO | 
 | 					       "btaudio: stereo=0 channels=1\n"); | 
 | 			} | 
 | 		} | 
 | 		return put_user((bta->channels)-1, p); | 
 |  | 
 |         case SNDCTL_DSP_CHANNELS: | 
 | 		if (!bta->analog) { | 
 | 			if (get_user(val, p)) | 
 | 				return -EFAULT; | 
 | 			bta->channels    = (val > 1) ? 2 : 1; | 
 | 			bta->sampleshift = (bta->channels == 2) ? 0 : 1; | 
 | 			if (debug) | 
 | 				printk(KERN_DEBUG | 
 | 				       "btaudio: val=%d channels=%d\n", | 
 | 				       val,bta->channels); | 
 | 		} | 
 | 		/* fall through */ | 
 |         case SOUND_PCM_READ_CHANNELS: | 
 | 		return put_user(bta->channels, p); | 
 | 		 | 
 |         case SNDCTL_DSP_GETFMTS: /* Returns a mask */ | 
 | 		if (bta->analog) | 
 | 			return put_user(AFMT_S16_LE|AFMT_S8, p); | 
 | 		else | 
 | 			return put_user(AFMT_S16_LE, p); | 
 |  | 
 |         case SNDCTL_DSP_SETFMT: /* Selects ONE fmt*/ | 
 | 		if (get_user(val, p)) | 
 | 			return -EFAULT; | 
 |                 if (val != AFMT_QUERY) { | 
 | 			if (bta->analog) | 
 | 				bta->bits = (val == AFMT_S8) ? 8 : 16; | 
 | 			else | 
 | 				bta->bits = 16; | 
 | 			if (bta->recording) { | 
 | 				mutex_lock(&bta->lock); | 
 | 				stop_recording(bta); | 
 | 				start_recording(bta); | 
 | 				mutex_unlock(&bta->lock); | 
 | 			} | 
 | 		} | 
 | 		if (debug) | 
 | 			printk(KERN_DEBUG "btaudio: fmt: bits=%d\n",bta->bits); | 
 |                 return put_user((bta->bits==16) ? AFMT_S16_LE : AFMT_S8, | 
 | 				p); | 
 | 		break; | 
 |         case SOUND_PCM_READ_BITS: | 
 | 		return put_user(bta->bits, p); | 
 |  | 
 |         case SNDCTL_DSP_NONBLOCK: | 
 |                 file->f_flags |= O_NONBLOCK; | 
 |                 return 0; | 
 |  | 
 |         case SNDCTL_DSP_RESET: | 
 | 		if (bta->recording) { | 
 | 			mutex_lock(&bta->lock); | 
 | 			stop_recording(bta); | 
 | 			mutex_unlock(&bta->lock); | 
 | 		} | 
 | 		return 0; | 
 |         case SNDCTL_DSP_GETBLKSIZE: | 
 | 		if (!bta->recording) { | 
 | 			if (0 != (ret = alloc_buffer(bta))) | 
 | 				return ret; | 
 | 			if (0 != (ret = make_risc(bta))) | 
 | 				return ret; | 
 | 		} | 
 | 		return put_user(bta->block_bytes>>bta->sampleshift,p); | 
 |  | 
 |         case SNDCTL_DSP_SYNC: | 
 | 		/* NOP */ | 
 | 		return 0; | 
 | 	case SNDCTL_DSP_GETISPACE: | 
 | 	{ | 
 | 		audio_buf_info info; | 
 | 		if (!bta->recording) | 
 | 			return -EINVAL; | 
 | 		info.fragsize = bta->block_bytes>>bta->sampleshift; | 
 | 		info.fragstotal = bta->block_count; | 
 | 		info.bytes = bta->read_count; | 
 | 		info.fragments = info.bytes / info.fragsize; | 
 | 		if (debug) | 
 | 			printk(KERN_DEBUG "btaudio: SNDCTL_DSP_GETISPACE " | 
 | 			       "returns %d/%d/%d/%d\n", | 
 | 			       info.fragsize, info.fragstotal, | 
 | 			       info.bytes, info.fragments); | 
 | 		if (copy_to_user(argp, &info, sizeof(info))) | 
 | 			return -EFAULT; | 
 | 		return 0; | 
 | 	} | 
 | #if 0 /* TODO */ | 
 |         case SNDCTL_DSP_GETTRIGGER: | 
 |         case SNDCTL_DSP_SETTRIGGER: | 
 |         case SNDCTL_DSP_SETFRAGMENT: | 
 | #endif | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 | } | 
 |  | 
 | static unsigned int btaudio_dsp_poll(struct file *file, struct poll_table_struct *wait) | 
 | { | 
 | 	struct btaudio *bta = file->private_data; | 
 | 	unsigned int mask = 0; | 
 |  | 
 | 	poll_wait(file, &bta->readq, wait); | 
 |  | 
 | 	if (0 != bta->read_count) | 
 | 		mask |= (POLLIN | POLLRDNORM); | 
 |  | 
 | 	return mask; | 
 | } | 
 |  | 
 | static struct file_operations btaudio_digital_dsp_fops = { | 
 | 	.owner		= THIS_MODULE, | 
 | 	.llseek		= no_llseek, | 
 | 	.open		= btaudio_dsp_open_digital, | 
 | 	.release	= btaudio_dsp_release, | 
 | 	.read		= btaudio_dsp_read, | 
 | 	.write		= btaudio_dsp_write, | 
 | 	.ioctl		= btaudio_dsp_ioctl, | 
 | 	.poll		= btaudio_dsp_poll, | 
 | }; | 
 |  | 
 | static struct file_operations btaudio_analog_dsp_fops = { | 
 | 	.owner		= THIS_MODULE, | 
 | 	.llseek		= no_llseek, | 
 | 	.open		= btaudio_dsp_open_analog, | 
 | 	.release	= btaudio_dsp_release, | 
 | 	.read		= btaudio_dsp_read, | 
 | 	.write		= btaudio_dsp_write, | 
 | 	.ioctl		= btaudio_dsp_ioctl, | 
 | 	.poll		= btaudio_dsp_poll, | 
 | }; | 
 |  | 
 | /* -------------------------------------------------------------- */ | 
 |  | 
 | static char *irq_name[] = { "", "", "", "OFLOW", "", "", "", "", "", "", "", | 
 | 			    "RISCI", "FBUS", "FTRGT", "FDSR", "PPERR", | 
 | 			    "RIPERR", "PABORT", "OCERR", "SCERR" }; | 
 |  | 
 | static irqreturn_t btaudio_irq(int irq, void *dev_id, struct pt_regs * regs) | 
 | { | 
 | 	int count = 0; | 
 | 	u32 stat,astat; | 
 | 	struct btaudio *bta = dev_id; | 
 | 	int handled = 0; | 
 |  | 
 | 	for (;;) { | 
 | 		count++; | 
 | 		stat  = btread(REG_INT_STAT); | 
 | 		astat = stat & btread(REG_INT_MASK); | 
 | 		if (!astat) | 
 | 			return IRQ_RETVAL(handled); | 
 | 		handled = 1; | 
 | 		btwrite(astat,REG_INT_STAT); | 
 |  | 
 | 		if (irq_debug) { | 
 | 			int i; | 
 | 			printk(KERN_DEBUG "btaudio: irq loop=%d risc=%x, bits:", | 
 | 			       count, stat>>28); | 
 | 			for (i = 0; i < (sizeof(irq_name)/sizeof(char*)); i++) { | 
 | 				if (stat & (1 << i)) | 
 | 					printk(" %s",irq_name[i]); | 
 | 				if (astat & (1 << i)) | 
 | 					printk("*"); | 
 | 			} | 
 | 			printk("\n"); | 
 | 		} | 
 | 		if (stat & IRQ_RISCI) { | 
 | 			int blocks; | 
 | 			blocks = (stat >> 28) - bta->dma_block; | 
 | 			if (blocks < 0) | 
 | 				blocks += bta->block_count; | 
 | 			bta->dma_block = stat >> 28; | 
 | 			if (bta->read_count + 2*bta->block_bytes > bta->buf_size) { | 
 | 				stop_recording(bta); | 
 | 				printk(KERN_INFO "btaudio: buffer overrun\n"); | 
 | 			} | 
 | 			if (blocks > 0) { | 
 | 				bta->read_count += blocks * bta->block_bytes; | 
 | 				wake_up_interruptible(&bta->readq); | 
 | 			} | 
 | 		} | 
 | 		if (count > 10) { | 
 | 			printk(KERN_WARNING | 
 | 			       "btaudio: Oops - irq mask cleared\n"); | 
 | 			btwrite(0, REG_INT_MASK); | 
 | 		} | 
 | 	} | 
 | 	return IRQ_NONE; | 
 | } | 
 |  | 
 | /* -------------------------------------------------------------- */ | 
 |  | 
 | static unsigned int dsp1 = -1; | 
 | static unsigned int dsp2 = -1; | 
 | static unsigned int mixer = -1; | 
 | static int latency = -1; | 
 | static int digital = 1; | 
 | static int analog = 1; | 
 | static int rate; | 
 |  | 
 | #define BTA_OSPREY200 1 | 
 |  | 
 | static struct cardinfo cards[] = { | 
 | 	[0] = { | 
 | 		.name	= "default", | 
 | 		.rate	= 32000, | 
 | 	}, | 
 | 	[BTA_OSPREY200] = { | 
 | 		.name	= "Osprey 200", | 
 | 		.rate	= 44100, | 
 | 	}, | 
 | }; | 
 |  | 
 | static int __devinit btaudio_probe(struct pci_dev *pci_dev, | 
 | 				   const struct pci_device_id *pci_id) | 
 | { | 
 | 	struct btaudio *bta; | 
 | 	struct cardinfo *card = &cards[pci_id->driver_data]; | 
 | 	unsigned char revision,lat; | 
 | 	int rc = -EBUSY; | 
 |  | 
 | 	if (pci_enable_device(pci_dev)) | 
 | 		return -EIO; | 
 | 	if (!request_mem_region(pci_resource_start(pci_dev,0), | 
 | 				pci_resource_len(pci_dev,0), | 
 | 				"btaudio")) { | 
 | 		return -EBUSY; | 
 | 	} | 
 |  | 
 | 	bta = kmalloc(sizeof(*bta),GFP_ATOMIC); | 
 | 	if (!bta) { | 
 | 		rc = -ENOMEM; | 
 | 		goto fail0; | 
 | 	} | 
 | 	memset(bta,0,sizeof(*bta)); | 
 |  | 
 | 	bta->pci  = pci_dev; | 
 | 	bta->irq  = pci_dev->irq; | 
 | 	bta->mem  = pci_resource_start(pci_dev,0); | 
 | 	bta->mmio = ioremap(pci_resource_start(pci_dev,0), | 
 | 			    pci_resource_len(pci_dev,0)); | 
 |  | 
 | 	bta->source     = 1; | 
 | 	bta->bits       = 8; | 
 | 	bta->channels   = 1; | 
 | 	if (bta->analog) { | 
 | 		bta->decimation  = 15; | 
 | 	} else { | 
 | 		bta->decimation  = 0; | 
 | 		bta->sampleshift = 1; | 
 | 	} | 
 |  | 
 | 	/* sample rate */ | 
 | 	bta->rate = card->rate; | 
 | 	if (rate) | 
 | 		bta->rate = rate; | 
 | 	 | 
 | 	mutex_init(&bta->lock); | 
 |         init_waitqueue_head(&bta->readq); | 
 |  | 
 | 	if (-1 != latency) { | 
 | 		printk(KERN_INFO "btaudio: setting pci latency timer to %d\n", | 
 | 		       latency); | 
 | 		pci_write_config_byte(pci_dev, PCI_LATENCY_TIMER, latency); | 
 | 	} | 
 |         pci_read_config_byte(pci_dev, PCI_CLASS_REVISION, &revision); | 
 |         pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &lat); | 
 |         printk(KERN_INFO "btaudio: Bt%x (rev %d) at %02x:%02x.%x, ", | 
 | 	       pci_dev->device,revision,pci_dev->bus->number, | 
 | 	       PCI_SLOT(pci_dev->devfn),PCI_FUNC(pci_dev->devfn)); | 
 |         printk("irq: %d, latency: %d, mmio: 0x%lx\n", | 
 | 	       bta->irq, lat, bta->mem); | 
 | 	printk("btaudio: using card config \"%s\"\n", card->name); | 
 |  | 
 | 	/* init hw */ | 
 |         btwrite(0, REG_GPIO_DMA_CTL); | 
 |         btwrite(0, REG_INT_MASK); | 
 |         btwrite(~0U, REG_INT_STAT); | 
 | 	pci_set_master(pci_dev); | 
 |  | 
 | 	if ((rc = request_irq(bta->irq, btaudio_irq, SA_SHIRQ|SA_INTERRUPT, | 
 | 			      "btaudio",(void *)bta)) < 0) { | 
 | 		printk(KERN_WARNING | 
 | 		       "btaudio: can't request irq (rc=%d)\n",rc); | 
 | 		goto fail1; | 
 | 	} | 
 |  | 
 | 	/* register devices */ | 
 | 	if (digital) { | 
 | 		rc = bta->dsp_digital = | 
 | 			register_sound_dsp(&btaudio_digital_dsp_fops,dsp1); | 
 | 		if (rc < 0) { | 
 | 			printk(KERN_WARNING | 
 | 			       "btaudio: can't register digital dsp (rc=%d)\n",rc); | 
 | 			goto fail2; | 
 | 		} | 
 | 		printk(KERN_INFO "btaudio: registered device dsp%d [digital]\n", | 
 | 		       bta->dsp_digital >> 4); | 
 | 	} | 
 | 	if (analog) { | 
 | 		rc = bta->dsp_analog = | 
 | 			register_sound_dsp(&btaudio_analog_dsp_fops,dsp2); | 
 | 		if (rc < 0) { | 
 | 			printk(KERN_WARNING | 
 | 			       "btaudio: can't register analog dsp (rc=%d)\n",rc); | 
 | 			goto fail3; | 
 | 		} | 
 | 		printk(KERN_INFO "btaudio: registered device dsp%d [analog]\n", | 
 | 		       bta->dsp_analog >> 4); | 
 | 		rc = bta->mixer_dev = register_sound_mixer(&btaudio_mixer_fops,mixer); | 
 | 		if (rc < 0) { | 
 | 			printk(KERN_WARNING | 
 | 			       "btaudio: can't register mixer (rc=%d)\n",rc); | 
 | 			goto fail4; | 
 | 		} | 
 | 		printk(KERN_INFO "btaudio: registered device mixer%d\n", | 
 | 		       bta->mixer_dev >> 4); | 
 | 	} | 
 |  | 
 | 	/* hook into linked list */ | 
 | 	bta->next = btaudios; | 
 | 	btaudios = bta; | 
 |  | 
 | 	pci_set_drvdata(pci_dev,bta); | 
 |         return 0; | 
 |  | 
 |  fail4: | 
 | 	unregister_sound_dsp(bta->dsp_analog); | 
 |  fail3: | 
 | 	if (digital) | 
 | 		unregister_sound_dsp(bta->dsp_digital); | 
 |  fail2: | 
 |         free_irq(bta->irq,bta);	 | 
 |  fail1: | 
 | 	kfree(bta); | 
 |  fail0: | 
 | 	release_mem_region(pci_resource_start(pci_dev,0), | 
 | 			   pci_resource_len(pci_dev,0)); | 
 | 	return rc; | 
 | } | 
 |  | 
 | static void __devexit btaudio_remove(struct pci_dev *pci_dev) | 
 | { | 
 | 	struct btaudio *bta = pci_get_drvdata(pci_dev); | 
 | 	struct btaudio *walk; | 
 |  | 
 | 	/* turn off all DMA / IRQs */ | 
 |         btand(~15, REG_GPIO_DMA_CTL); | 
 |         btwrite(0, REG_INT_MASK); | 
 |         btwrite(~0U, REG_INT_STAT); | 
 |  | 
 | 	/* unregister devices */ | 
 | 	if (digital) { | 
 | 		unregister_sound_dsp(bta->dsp_digital); | 
 | 	} | 
 | 	if (analog) { | 
 | 		unregister_sound_dsp(bta->dsp_analog); | 
 | 		unregister_sound_mixer(bta->mixer_dev); | 
 | 	} | 
 |  | 
 | 	/* free resources */ | 
 | 	free_buffer(bta); | 
 |         free_irq(bta->irq,bta); | 
 | 	release_mem_region(pci_resource_start(pci_dev,0), | 
 | 			   pci_resource_len(pci_dev,0)); | 
 |  | 
 | 	/* remove from linked list */ | 
 | 	if (bta == btaudios) { | 
 | 		btaudios = NULL; | 
 | 	} else { | 
 | 		for (walk = btaudios; walk->next != bta; walk = walk->next) | 
 | 			; /* if (NULL == walk->next) BUG(); */ | 
 | 		walk->next = bta->next; | 
 | 	} | 
 |  | 
 | 	pci_set_drvdata(pci_dev, NULL); | 
 | 	kfree(bta); | 
 | 	return; | 
 | } | 
 |  | 
 | /* -------------------------------------------------------------- */ | 
 |  | 
 | static struct pci_device_id btaudio_pci_tbl[] = { | 
 |         { | 
 | 		.vendor		= PCI_VENDOR_ID_BROOKTREE, | 
 | 		.device		= 0x0878, | 
 | 		.subvendor	= 0x0070, | 
 | 		.subdevice	= 0xff01, | 
 | 		.driver_data	= BTA_OSPREY200, | 
 | 	},{ | 
 | 		.vendor		= PCI_VENDOR_ID_BROOKTREE, | 
 | 		.device		= 0x0878, | 
 | 		.subvendor	= PCI_ANY_ID, | 
 | 		.subdevice	= PCI_ANY_ID, | 
 | 	},{ | 
 | 		.vendor		= PCI_VENDOR_ID_BROOKTREE, | 
 | 		.device		= 0x0878, | 
 | 		.subvendor	= PCI_ANY_ID, | 
 | 		.subdevice	= PCI_ANY_ID, | 
 |         },{ | 
 | 		/* --- end of list --- */ | 
 | 	} | 
 | }; | 
 |  | 
 | static struct pci_driver btaudio_pci_driver = { | 
 |         .name		= "btaudio", | 
 |         .id_table	= btaudio_pci_tbl, | 
 |         .probe		= btaudio_probe, | 
 |         .remove		=  __devexit_p(btaudio_remove), | 
 | }; | 
 |  | 
 | static int btaudio_init_module(void) | 
 | { | 
 | 	printk(KERN_INFO "btaudio: driver version 0.7 loaded [%s%s%s]\n", | 
 | 	       digital ? "digital" : "", | 
 | 	       analog && digital ? "+" : "", | 
 | 	       analog ? "analog" : ""); | 
 | 	return pci_register_driver(&btaudio_pci_driver); | 
 | } | 
 |  | 
 | static void btaudio_cleanup_module(void) | 
 | { | 
 | 	pci_unregister_driver(&btaudio_pci_driver); | 
 | 	return; | 
 | } | 
 |  | 
 | module_init(btaudio_init_module); | 
 | module_exit(btaudio_cleanup_module); | 
 |  | 
 | module_param(dsp1, int, S_IRUGO); | 
 | module_param(dsp2, int, S_IRUGO); | 
 | module_param(mixer, int, S_IRUGO); | 
 | module_param(debug, int, S_IRUGO | S_IWUSR); | 
 | module_param(irq_debug, int, S_IRUGO | S_IWUSR); | 
 | module_param(digital, int, S_IRUGO); | 
 | module_param(analog, int, S_IRUGO); | 
 | module_param(rate, int, S_IRUGO); | 
 | module_param(latency, int, S_IRUGO); | 
 | MODULE_PARM_DESC(latency,"pci latency timer"); | 
 |  | 
 | MODULE_DEVICE_TABLE(pci, btaudio_pci_tbl); | 
 | MODULE_DESCRIPTION("bt878 audio dma driver"); | 
 | MODULE_AUTHOR("Gerd Knorr"); | 
 | MODULE_LICENSE("GPL"); | 
 |  | 
 | /* | 
 |  * Local variables: | 
 |  * c-basic-offset: 8 | 
 |  * End: | 
 |  */ |