bnx2x: Proper netdev->ndo_set_rx_mode() implementation.
Completed the bnx2x_set_rx_mode() to a proper netdev->ndo_set_rx_mode
implementation:
- Added a missing configuration of a unicast MAC addresses list.
- Changed bp->dma_lock from being a mutex to a spinlock as long as it's taken
under netdev->addr_list_lock now.
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/bnx2x/bnx2x_cmn.c b/drivers/net/bnx2x/bnx2x_cmn.c
index 844afce..6fac8e1 100644
--- a/drivers/net/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/bnx2x/bnx2x_cmn.c
@@ -1452,28 +1452,35 @@
bnx2x_set_eth_mac(bp, 1);
+ /* Clear MC configuration */
+ if (CHIP_IS_E1(bp))
+ bnx2x_invalidate_e1_mc_list(bp);
+ else
+ bnx2x_invalidate_e1h_mc_list(bp);
+
+ /* Clear UC lists configuration */
+ bnx2x_invalidate_uc_list(bp);
+
if (bp->port.pmf)
bnx2x_initial_phy_init(bp, load_mode);
+ /* Initialize Rx filtering */
+ bnx2x_set_rx_mode(bp->dev);
+
/* Start fast path */
switch (load_mode) {
case LOAD_NORMAL:
/* Tx queue should be only reenabled */
netif_tx_wake_all_queues(bp->dev);
/* Initialize the receive filter. */
- bnx2x_set_rx_mode(bp->dev);
break;
case LOAD_OPEN:
netif_tx_start_all_queues(bp->dev);
smp_mb__after_clear_bit();
- /* Initialize the receive filter. */
- bnx2x_set_rx_mode(bp->dev);
break;
case LOAD_DIAG:
- /* Initialize the receive filter. */
- bnx2x_set_rx_mode(bp->dev);
bp->state = BNX2X_STATE_DIAG;
break;