Rename CONFIG_CPU_MIPS{32,64} to CONFIG_CPU_MIPS{32|64}_R1.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 0ca63e7..a4c62c7 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1050,14 +1050,28 @@
prompt "CPU type"
default CPU_R4X00
-config CPU_MIPS32
- bool "MIPS32"
+config CPU_MIPS32_R1
+ bool "MIPS32 Release 1"
select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_HAS_PREFETCH
+ help
+ Choose this option to build a kernel for release 1 or later of the
+ MIPS32 architecture. Most modern embedded systems with a 32-bit
+ MIPS processor are based on a MIPS32 processor. If you know the
+ specific type of processor in your system, choose those that one
+ otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
-config CPU_MIPS64
- bool "MIPS64"
+config CPU_MIPS64_R1
+ bool "MIPS64 Release 1"
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
+ select CPU_HAS_PREFETCH
+ help
+ Choose this option to build a kernel for release 1 or later of the
+ MIPS64 architecture. Many modern embedded systems with a 64-bit
+ MIPS processor are based on a MIPS64 processor. If you know the
+ specific type of processor in your system, choose those that one
+ otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
config CPU_R3000
bool "R3000"
@@ -1253,7 +1267,7 @@
config 64BIT_PHYS_ADDR
bool "Support for 64-bit physical address space"
- depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && 32BIT
+ depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32_R1 || CPU_MIPS64_R1) && 32BIT
config CPU_ADVANCED
bool "Override CPU Options"
@@ -1276,7 +1290,7 @@
config CPU_HAS_LLDSCD
bool "lld/scd Instructions available" if CPU_ADVANCED
- default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX && !CPU_MIPS32
+ default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX && !CPU_MIPS32_R1
help
Say Y here if your CPU has the lld and scd instructions, the 64-bit
equivalents of ll and sc. Say Y here for better performance, N if
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index bbf9027..56e1d42 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -182,11 +182,11 @@
$(call set_gccflags,r4600,mips3,r4600,mips3,mips2) \
-Wa,--trap
-cflags-$(CONFIG_CPU_MIPS32) += \
+cflags-$(CONFIG_CPU_MIPS32_R1) += \
$(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \
-Wa,--trap
-cflags-$(CONFIG_CPU_MIPS64) += \
+cflags-$(CONFIG_CPU_MIPS64_R1) += \
$(call set_gccflags,mips64,mips64,r4600,mips3,mips2) \
-Wa,--trap
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index d54964d..0867417 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -28,8 +28,8 @@
obj-$(CONFIG_CPU_NEVADA) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R10000) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_SB1) += r4k_fpu.o r4k_switch.o
-obj-$(CONFIG_CPU_MIPS32) += r4k_fpu.o r4k_switch.o
-obj-$(CONFIG_CPU_MIPS64) += r4k_fpu.o r4k_switch.o
+obj-$(CONFIG_CPU_MIPS32_R1) += r4k_fpu.o r4k_switch.o
+obj-$(CONFIG_CPU_MIPS64_R1) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R6000) += r6000_fpu.o r4k_switch.o
obj-$(CONFIG_SMP) += smp.o
diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S
index d2afbd1..27361f4 100644
--- a/arch/mips/kernel/r4k_switch.S
+++ b/arch/mips/kernel/r4k_switch.S
@@ -165,7 +165,7 @@
1:
#endif
-#ifdef CONFIG_CPU_MIPS32
+#ifdef CONFIG_CPU_MIPS32_R1
mtc1 t1, $f0
mtc1 t1, $f1
mtc1 t1, $f2
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 46636a2..b2fa607 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -864,7 +864,7 @@
reg_val & (1<<22) ? "E0 " : "");
printk("IDX: 0x%08x\n", reg_val & ((1<<22)-1));
-#if defined(CONFIG_CPU_MIPS32) || defined (CONFIG_CPU_MIPS64)
+#if defined(CONFIG_CPU_MIPS32_R1) || defined(CONFIG_CPU_MIPS64_R1)
if (reg_val & (1<<22))
printk("DErrAddr0: 0x%0*lx\n", field, read_c0_derraddr0());
diff --git a/arch/mips/lib-32/Makefile b/arch/mips/lib-32/Makefile
index ad28578..8119996 100644
--- a/arch/mips/lib-32/Makefile
+++ b/arch/mips/lib-32/Makefile
@@ -4,8 +4,8 @@
lib-y += csum_partial.o memset.o watch.o
-obj-$(CONFIG_CPU_MIPS32) += dump_tlb.o
-obj-$(CONFIG_CPU_MIPS64) += dump_tlb.o
+obj-$(CONFIG_CPU_MIPS32_R1) += dump_tlb.o
+obj-$(CONFIG_CPU_MIPS64_R1) += dump_tlb.o
obj-$(CONFIG_CPU_NEVADA) += dump_tlb.o
obj-$(CONFIG_CPU_R10000) += dump_tlb.o
obj-$(CONFIG_CPU_R3000) += r3k_dump_tlb.o
diff --git a/arch/mips/lib-64/Makefile b/arch/mips/lib-64/Makefile
index ad28578..8119996 100644
--- a/arch/mips/lib-64/Makefile
+++ b/arch/mips/lib-64/Makefile
@@ -4,8 +4,8 @@
lib-y += csum_partial.o memset.o watch.o
-obj-$(CONFIG_CPU_MIPS32) += dump_tlb.o
-obj-$(CONFIG_CPU_MIPS64) += dump_tlb.o
+obj-$(CONFIG_CPU_MIPS32_R1) += dump_tlb.o
+obj-$(CONFIG_CPU_MIPS64_R1) += dump_tlb.o
obj-$(CONFIG_CPU_NEVADA) += dump_tlb.o
obj-$(CONFIG_CPU_R10000) += dump_tlb.o
obj-$(CONFIG_CPU_R3000) += r3k_dump_tlb.o
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index b56a0ab..74fea86 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -9,8 +9,8 @@
obj-$(CONFIG_64BIT) += pgtable-64.o
obj-$(CONFIG_HIGHMEM) += highmem.o
-obj-$(CONFIG_CPU_MIPS32) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
-obj-$(CONFIG_CPU_MIPS64) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
+obj-$(CONFIG_CPU_MIPS32_R1) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
+obj-$(CONFIG_CPU_MIPS64_R1) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
obj-$(CONFIG_CPU_NEVADA) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
obj-$(CONFIG_CPU_R10000) += c-r4k.o cex-gen.o pg-r4k.o tlb-andes.o
obj-$(CONFIG_CPU_R3000) += c-r3k.o tlb-r3k.o pg-r4k.o
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index eaecb86..172293b 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -118,8 +118,8 @@
#if defined(CONFIG_CPU_R4X00) || defined(CONFIG_CPU_VR41XX) || \
defined(CONFIG_CPU_R4300) || defined(CONFIG_CPU_R5000) || \
defined(CONFIG_CPU_NEVADA) || defined(CONFIG_CPU_R5432) || \
- defined(CONFIG_CPU_R5500) || defined(CONFIG_CPU_MIPS32) || \
- defined(CONFIG_CPU_MIPS64) || defined(CONFIG_CPU_TX49XX) || \
+ defined(CONFIG_CPU_R5500) || defined(CONFIG_CPU_MIPS32_R1) || \
+ defined(CONFIG_CPU_MIPS64_R1) || defined(CONFIG_CPU_TX49XX) || \
defined(CONFIG_CPU_RM7000) || defined(CONFIG_CPU_RM9000)
ld_mmu_r4xx0();
#endif
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index 316c8a3..8297970 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -263,7 +263,7 @@
idx = read_c0_index();
ptep = pte_offset_map(pmdp, address);
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
write_c0_entrylo0(ptep->pte_high);
ptep++;
write_c0_entrylo1(ptep->pte_high);
diff --git a/arch/mips/mm/tlb-sb1.c b/arch/mips/mm/tlb-sb1.c
index bba7130..f55fbbe 100644
--- a/arch/mips/mm/tlb-sb1.c
+++ b/arch/mips/mm/tlb-sb1.c
@@ -320,7 +320,7 @@
idx = read_c0_index();
ptep = pte_offset_map(pmdp, address);
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
write_c0_entrylo0(ptep->pte_high);
ptep++;
write_c0_entrylo1(ptep->pte_high);
diff --git a/arch/mips/oprofile/Makefile b/arch/mips/oprofile/Makefile
index 354261d..17b411b 100644
--- a/arch/mips/oprofile/Makefile
+++ b/arch/mips/oprofile/Makefile
@@ -10,6 +10,6 @@
oprofile-y := $(DRIVER_OBJS) common.o
-oprofile-$(CONFIG_CPU_MIPS32) += op_model_mipsxx.o
-oprofile-$(CONFIG_CPU_MIPS64) += op_model_mipsxx.o
+oprofile-$(CONFIG_CPU_MIPS32_R1) += op_model_mipsxx.o
+oprofile-$(CONFIG_CPU_MIPS64_R1) += op_model_mipsxx.o
oprofile-$(CONFIG_CPU_RM9000) += op_model_rm9000.o