Blackfin: boards: update ASoC resources after machine driver overhaul
Now that the Blackfin machine drivers have been updated to the
multicomponent support, update the resources to match. The pin
settings are now a board issue and removed from the driver.
Signed-off-by: Scott Jiang <scott.jiang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 2cd2ff6..e67ac77 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -26,6 +26,7 @@
#include <asm/portmux.h>
#include <asm/dpmc.h>
#include <linux/spi/ad7877.h>
+#include <asm/bfin_sport.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -526,11 +527,69 @@
};
#endif
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
+ defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+
+static const u16 bfin_snd_pin[][7] = {
+ {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+ P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0, 0},
+ {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+ P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_TFS, 0},
+};
+
+static struct bfin_snd_platform_data bfin_snd_data[] = {
+ {
+ .pin_req = &bfin_snd_pin[0][0],
+ },
+ {
+ .pin_req = &bfin_snd_pin[1][0],
+ },
+};
+
+#define BFIN_SND_RES(x) \
+ [x] = { \
+ { \
+ .start = SPORT##x##_TCR1, \
+ .end = SPORT##x##_TCR1, \
+ .flags = IORESOURCE_MEM \
+ }, \
+ { \
+ .start = CH_SPORT##x##_RX, \
+ .end = CH_SPORT##x##_RX, \
+ .flags = IORESOURCE_DMA, \
+ }, \
+ { \
+ .start = CH_SPORT##x##_TX, \
+ .end = CH_SPORT##x##_TX, \
+ .flags = IORESOURCE_DMA, \
+ }, \
+ { \
+ .start = IRQ_SPORT##x##_ERROR, \
+ .end = IRQ_SPORT##x##_ERROR, \
+ .flags = IORESOURCE_IRQ, \
+ } \
+ }
+
+static struct resource bfin_snd_resources[][4] = {
+ BFIN_SND_RES(0),
+ BFIN_SND_RES(1),
+};
+
+static struct platform_device bfin_pcm = {
+ .name = "bfin-pcm-audio",
+ .id = -1,
+};
+#endif
+
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
static struct platform_device bfin_i2s = {
.name = "bfin-i2s",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
- /* TODO: add platform data here */
+ .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
+ .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
+ .dev = {
+ .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
+ },
};
#endif
@@ -538,7 +597,11 @@
static struct platform_device bfin_tdm = {
.name = "bfin-tdm",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
- /* TODO: add platform data here */
+ .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
+ .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
+ .dev = {
+ .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
+ },
};
#endif
@@ -583,7 +646,9 @@
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 4,
+ .platform_data = "ad1836",
.controller_data = &ad1836_spi_chip_info,
+ .mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
@@ -1211,6 +1276,11 @@
&ezkit_flash_device,
#endif
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
+ defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+ &bfin_pcm,
+#endif
+
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
&bfin_i2s,
#endif