MIPS: Loongson: Add basic Loongson 2F support
Loongson 2F has built-in DDR2 and PCI-X controller. The PCI-X controller
has a programming interface similiar to the the FPGA northbridge used on
Loongson 2E.
The main differences between Loongson 2E and Loongson 2F include:
1. Loongson 2F has an extra address window configuration module, which
is used to map CPU address space to DDR or PCI address space, or map
the PCI-DMA address space to DDR or LIO address space.
2. Loongson 2F supports 8 levels of software configurable CPu frequency
which can be configured in the LOONGSON_CHIPCFG0 register. The coming
cpufreq and standby support are based on this feature.
Loongson.h abstracts the modules and corresponding methods are abstracted.
Add other Loongson-2F-specific source code including gcc 4.4 support, PCI
memory space, PCI IO space, DMA address.
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/loongson/common/bonito-irq.c b/arch/mips/loongson/common/bonito-irq.c
index a1cbd11..2dc2a4c 100644
--- a/arch/mips/loongson/common/bonito-irq.c
+++ b/arch/mips/loongson/common/bonito-irq.c
@@ -12,6 +12,7 @@
* option) any later version.
*/
#include <linux/interrupt.h>
+#include <linux/compiler.h>
#include <loongson.h>
@@ -35,7 +36,7 @@
.unmask = bonito_irq_enable,
};
-static struct irqaction dma_timeout_irqaction = {
+static struct irqaction __maybe_unused dma_timeout_irqaction = {
.handler = no_action,
.name = "dma_timeout",
};
@@ -47,5 +48,7 @@
for (i = LOONGSON_IRQ_BASE; i < LOONGSON_IRQ_BASE + 32; i++)
set_irq_chip_and_handler(i, &bonito_irq_type, handle_level_irq);
+#ifdef CONFIG_CPU_LOONGSON2E
setup_irq(LOONGSON_IRQ_BASE + 10, &dma_timeout_irqaction);
+#endif
}
diff --git a/arch/mips/loongson/common/init.c b/arch/mips/loongson/common/init.c
index 3b1dbc1..743d357 100644
--- a/arch/mips/loongson/common/init.c
+++ b/arch/mips/loongson/common/init.c
@@ -12,12 +12,20 @@
#include <loongson.h>
+/* Loongson CPU address windows config space base address */
+unsigned long __maybe_unused _loongson_addrwincfg_base;
+
void __init prom_init(void)
{
/* init base address of io space */
set_io_port_base((unsigned long)
ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE));
+#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
+ _loongson_addrwincfg_base = (unsigned long)
+ ioremap(LOONGSON_ADDRWINCFG_BASE, LOONGSON_ADDRWINCFG_SIZE);
+#endif
+
prom_init_cmdline();
prom_init_env();
prom_init_memory();
diff --git a/arch/mips/loongson/common/mem.c b/arch/mips/loongson/common/mem.c
index 3f7f153..e93551d 100644
--- a/arch/mips/loongson/common/mem.c
+++ b/arch/mips/loongson/common/mem.c
@@ -21,14 +21,31 @@
add_memory_region(memsize << 20, LOONGSON_PCI_MEM_START - (memsize <<
20), BOOT_MEM_RESERVED);
#ifdef CONFIG_64BIT
- if (highmemsize > 0)
- add_memory_region(LOONGSON_HIGHMEM_START,
- highmemsize << 20, BOOT_MEM_RAM);
+#ifdef CONFIG_CPU_LOONGSON2F
+ {
+ int bit;
- add_memory_region(LOONGSON_PCI_MEM_END + 1, LOONGSON_HIGHMEM_START -
- LOONGSON_PCI_MEM_END - 1, BOOT_MEM_RESERVED);
+ bit = fls(memsize + highmemsize);
+ if (bit != ffs(memsize + highmemsize))
+ bit += 20;
+ else
+ bit = bit + 20 - 1;
-#endif /* CONFIG_64BIT */
+ /* set cpu window3 to map CPU to DDR: 2G -> 2G */
+ LOONGSON_ADDRWIN_CPUTODDR(ADDRWIN_WIN3, 0x80000000ul,
+ 0x80000000ul, (1 << bit));
+ mmiowb();
+ }
+#endif /* CONFIG_CPU_LOONGSON2F */
+
+ if (highmemsize > 0)
+ add_memory_region(LOONGSON_HIGHMEM_START,
+ highmemsize << 20, BOOT_MEM_RAM);
+
+ add_memory_region(LOONGSON_PCI_MEM_END + 1, LOONGSON_HIGHMEM_START -
+ LOONGSON_PCI_MEM_END - 1, BOOT_MEM_RESERVED);
+
+#endif /* CONFIG_64BIT */
}
/* override of arch/mips/mm/cache.c: __uncached_access */
diff --git a/arch/mips/loongson/common/pci.c b/arch/mips/loongson/common/pci.c
index a7eb8b9..eac43b8 100644
--- a/arch/mips/loongson/common/pci.c
+++ b/arch/mips/loongson/common/pci.c
@@ -67,6 +67,14 @@
/* can not change gnt to break pci transfer when device's gnt not
deassert for some broken device */
LOONGSON_PXARB_CFG = 0x00fe0105ul;
+
+#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
+ /*
+ * set cpu addr window2 to map CPU address space to PCI address space
+ */
+ LOONGSON_ADDRWIN_CPUTOPCI(ADDRWIN_WIN2, LOONGSON_CPU_MEM_SRC,
+ LOONGSON_PCI_MEM_DST, MMAP_CPUTOPCI_SIZE);
+#endif
}
static int __init pcibios_init(void)