diff --git a/drivers/media/dvb/dvb-usb/az6007.c b/drivers/media/dvb/dvb-usb/az6007.c
index 00a0bf1..bf8d201 100644
--- a/drivers/media/dvb/dvb-usb/az6007.c
+++ b/drivers/media/dvb/dvb-usb/az6007.c
@@ -69,6 +69,7 @@
 	.single_master = true,
 	.no_i2c_bridge = false,
 	.chunk_size = 64,
+	.mpeg_out_clk_strength = 0x02,
 	.microcode_name = "dvb-usb-terratec-h7-az6007.fw",
 };
 
@@ -278,12 +279,10 @@
 {
 	struct usb_device *udev = interface_to_usbdev(intf);
 	int ret;
-
 	/* TS through */
 	ret = az6007_write(udev, AZ6007_POWER, onoff, 0, NULL, 0);
 	if (ret < 0)
 		err("%s failed with error %d", __func__, ret);
-
 	return ret;
 }
 
diff --git a/drivers/media/dvb/frontends/drxk.h b/drivers/media/dvb/frontends/drxk.h
index 6b0fd2c..ca921c7 100644
--- a/drivers/media/dvb/frontends/drxk.h
+++ b/drivers/media/dvb/frontends/drxk.h
@@ -17,6 +17,7 @@
  * @antenna_gpio:	GPIO bit used to control the antenna
  * @antenna_dvbt:	GPIO bit for changing antenna to DVB-C. A value of 1
  *			means that 1=DVBC, 0 = DVBT. Zero means the opposite.
+ * @mpeg_out_clk_strength: DRXK Mpeg output clock drive strength.
  * @microcode_name:	Name of the firmware file with the microcode
  *
  * On the *_gpio vars, bit 0 is UIO-1, bit 1 is UIO-2 and bit 2 is
@@ -32,7 +33,8 @@
 	bool	antenna_dvbt;
 	u16	antenna_gpio;
 
-	int    chunk_size;
+	u8	mpeg_out_clk_strength;
+	int	chunk_size;
 
 	const char *microcode_name;
 };
diff --git a/drivers/media/dvb/frontends/drxk_hard.c b/drivers/media/dvb/frontends/drxk_hard.c
index 6570396..d25b0d2 100644
--- a/drivers/media/dvb/frontends/drxk_hard.c
+++ b/drivers/media/dvb/frontends/drxk_hard.c
@@ -91,10 +91,6 @@
 #define DRXK_MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH (0x03)
 #endif
 
-#ifndef DRXK_MPEG_OUTPUT_CLK_DRIVE_STRENGTH
-#define DRXK_MPEG_OUTPUT_CLK_DRIVE_STRENGTH (0x06)
-#endif
-
 #define DEFAULT_DRXK_MPEG_LOCK_TIMEOUT 700
 #define DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT 500
 
@@ -659,7 +655,6 @@
 	u32 ulGPIOCfg = 0x0113;
 	u32 ulInvertTSClock = 0;
 	u32 ulTSDataStrength = DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH;
-	u32 ulTSClockkStrength = DRXK_MPEG_OUTPUT_CLK_DRIVE_STRENGTH;
 	u32 ulDVBTBitrate = 50000000;
 	u32 ulDVBCBitrate = DRXK_QAM_SYMBOLRATE_MAX * 8;
 
@@ -820,7 +815,6 @@
 	state->m_DVBCBitrate = ulDVBCBitrate;
 
 	state->m_TSDataStrength = (ulTSDataStrength & 0x07);
-	state->m_TSClockkStrength = (ulTSClockkStrength & 0x07);
 
 	/* Maximum bitrate in b/s in case static clockrate is selected */
 	state->m_mpegTsStaticBitrate = 19392658;
@@ -6394,6 +6388,12 @@
 		state->m_DVBCStaticCLK = 1;
 	}
 
+
+	if (config->mpeg_out_clk_strength)
+		state->m_TSClockkStrength = config->mpeg_out_clk_strength & 0x07;
+	else
+		state->m_TSClockkStrength = 0x06;
+
 	if (config->parallel_ts)
 		state->m_enableParallel = true;
 	else