| /* |
| * P1022 DS 36Bit Physical Address Map Device Tree Source |
| * |
| * Copyright 2010 Freescale Semiconductor, Inc. |
| * |
| * This file is licensed under the terms of the GNU General Public License |
| * version 2. This program is licensed "as is" without any warranty of any |
| * kind, whether express or implied. |
| */ |
| |
| /dts-v1/; |
| / { |
| model = "fsl,P1022"; |
| compatible = "fsl,P1022DS"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| interrupt-parent = <&mpic>; |
| |
| aliases { |
| ethernet0 = &enet0; |
| ethernet1 = &enet1; |
| serial0 = &serial0; |
| serial1 = &serial1; |
| pci0 = &pci0; |
| pci1 = &pci1; |
| pci2 = &pci2; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| PowerPC,P1022@0 { |
| device_type = "cpu"; |
| reg = <0x0>; |
| next-level-cache = <&L2>; |
| }; |
| |
| PowerPC,P1022@1 { |
| device_type = "cpu"; |
| reg = <0x1>; |
| next-level-cache = <&L2>; |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| }; |
| |
| localbus@fffe05000 { |
| #address-cells = <2>; |
| #size-cells = <1>; |
| compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus"; |
| reg = <0 0xffe05000 0 0x1000>; |
| interrupts = <19 2 0 0>; |
| |
| ranges = <0x0 0x0 0xf 0xe8000000 0x08000000 |
| 0x1 0x0 0xf 0xe0000000 0x08000000 |
| 0x2 0x0 0x0 0xffa00000 0x00040000 |
| 0x3 0x0 0xf 0xffdf0000 0x00008000>; |
| |
| nor@0,0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "cfi-flash"; |
| reg = <0x0 0x0 0x8000000>; |
| bank-width = <2>; |
| device-width = <1>; |
| |
| partition@0 { |
| reg = <0x0 0x03000000>; |
| label = "ramdisk-nor"; |
| read-only; |
| }; |
| |
| partition@3000000 { |
| reg = <0x03000000 0x00e00000>; |
| label = "diagnostic-nor"; |
| read-only; |
| }; |
| |
| partition@3e00000 { |
| reg = <0x03e00000 0x00200000>; |
| label = "dink-nor"; |
| read-only; |
| }; |
| |
| partition@4000000 { |
| reg = <0x04000000 0x00400000>; |
| label = "kernel-nor"; |
| read-only; |
| }; |
| |
| partition@4400000 { |
| reg = <0x04400000 0x03b00000>; |
| label = "jffs2-nor"; |
| }; |
| |
| partition@7f00000 { |
| reg = <0x07f00000 0x00080000>; |
| label = "dtb-nor"; |
| read-only; |
| }; |
| |
| partition@7f80000 { |
| reg = <0x07f80000 0x00080000>; |
| label = "u-boot-nor"; |
| read-only; |
| }; |
| }; |
| |
| nand@2,0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,elbc-fcm-nand"; |
| reg = <0x2 0x0 0x40000>; |
| |
| partition@0 { |
| reg = <0x0 0x02000000>; |
| label = "u-boot-nand"; |
| read-only; |
| }; |
| |
| partition@2000000 { |
| reg = <0x02000000 0x10000000>; |
| label = "jffs2-nand"; |
| }; |
| |
| partition@12000000 { |
| reg = <0x12000000 0x10000000>; |
| label = "ramdisk-nand"; |
| read-only; |
| }; |
| |
| partition@22000000 { |
| reg = <0x22000000 0x04000000>; |
| label = "kernel-nand"; |
| }; |
| |
| partition@26000000 { |
| reg = <0x26000000 0x01000000>; |
| label = "dtb-nand"; |
| read-only; |
| }; |
| |
| partition@27000000 { |
| reg = <0x27000000 0x19000000>; |
| label = "reserved-nand"; |
| }; |
| }; |
| |
| board-control@3,0 { |
| compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis"; |
| reg = <3 0 0x30>; |
| interrupt-parent = <&mpic>; |
| /* |
| * IRQ8 is generated if the "EVENT" switch is pressed |
| * and PX_CTL[EVESEL] is set to 00. |
| */ |
| interrupts = <8 8 0 0>; |
| }; |
| }; |
| |
| soc@fffe00000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "soc"; |
| compatible = "fsl,p1022-immr", "simple-bus"; |
| ranges = <0x0 0xf 0xffe00000 0x100000>; |
| bus-frequency = <0>; // Filled out by uboot. |
| |
| ecm-law@0 { |
| compatible = "fsl,ecm-law"; |
| reg = <0x0 0x1000>; |
| fsl,num-laws = <12>; |
| }; |
| |
| ecm@1000 { |
| compatible = "fsl,p1022-ecm", "fsl,ecm"; |
| reg = <0x1000 0x1000>; |
| interrupts = <16 2 0 0>; |
| }; |
| |
| memory-controller@2000 { |
| compatible = "fsl,p1022-memory-controller"; |
| reg = <0x2000 0x1000>; |
| interrupts = <16 2 0 0>; |
| }; |
| |
| i2c@3000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <0>; |
| compatible = "fsl-i2c"; |
| reg = <0x3000 0x100>; |
| interrupts = <43 2 0 0>; |
| dfsrr; |
| }; |
| |
| i2c@3100 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <1>; |
| compatible = "fsl-i2c"; |
| reg = <0x3100 0x100>; |
| interrupts = <43 2 0 0>; |
| dfsrr; |
| |
| wm8776:codec@1a { |
| compatible = "wlf,wm8776"; |
| reg = <0x1a>; |
| /* |
| * clock-frequency will be set by U-Boot if |
| * the clock is enabled. |
| */ |
| }; |
| }; |
| |
| serial0: serial@4500 { |
| cell-index = <0>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x4500 0x100>; |
| clock-frequency = <0>; |
| interrupts = <42 2 0 0>; |
| }; |
| |
| serial1: serial@4600 { |
| cell-index = <1>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x4600 0x100>; |
| clock-frequency = <0>; |
| interrupts = <42 2 0 0>; |
| }; |
| |
| spi@7000 { |
| cell-index = <0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,espi"; |
| reg = <0x7000 0x1000>; |
| interrupts = <59 0x2 0 0>; |
| espi,num-ss-bits = <4>; |
| mode = "cpu"; |
| |
| fsl_m25p80@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,espi-flash"; |
| reg = <0>; |
| linux,modalias = "fsl_m25p80"; |
| spi-max-frequency = <40000000>; /* input clock */ |
| partition@0 { |
| label = "u-boot-spi"; |
| reg = <0x00000000 0x00100000>; |
| read-only; |
| }; |
| partition@100000 { |
| label = "kernel-spi"; |
| reg = <0x00100000 0x00500000>; |
| read-only; |
| }; |
| partition@600000 { |
| label = "dtb-spi"; |
| reg = <0x00600000 0x00100000>; |
| read-only; |
| }; |
| partition@700000 { |
| label = "file system-spi"; |
| reg = <0x00700000 0x00900000>; |
| }; |
| }; |
| }; |
| |
| ssi@15000 { |
| compatible = "fsl,mpc8610-ssi"; |
| cell-index = <0>; |
| reg = <0x15000 0x100>; |
| interrupts = <75 2 0 0>; |
| fsl,mode = "i2s-slave"; |
| codec-handle = <&wm8776>; |
| fsl,playback-dma = <&dma00>; |
| fsl,capture-dma = <&dma01>; |
| fsl,fifo-depth = <15>; |
| fsl,ssi-asynchronous; |
| }; |
| |
| dma@c300 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,eloplus-dma"; |
| reg = <0xc300 0x4>; |
| ranges = <0x0 0xc100 0x200>; |
| cell-index = <1>; |
| dma00: dma-channel@0 { |
| compatible = "fsl,ssi-dma-channel"; |
| reg = <0x0 0x80>; |
| cell-index = <0>; |
| interrupts = <76 2 0 0>; |
| }; |
| dma01: dma-channel@80 { |
| compatible = "fsl,ssi-dma-channel"; |
| reg = <0x80 0x80>; |
| cell-index = <1>; |
| interrupts = <77 2 0 0>; |
| }; |
| dma-channel@100 { |
| compatible = "fsl,eloplus-dma-channel"; |
| reg = <0x100 0x80>; |
| cell-index = <2>; |
| interrupts = <78 2 0 0>; |
| }; |
| dma-channel@180 { |
| compatible = "fsl,eloplus-dma-channel"; |
| reg = <0x180 0x80>; |
| cell-index = <3>; |
| interrupts = <79 2 0 0>; |
| }; |
| }; |
| |
| gpio: gpio-controller@f000 { |
| #gpio-cells = <2>; |
| compatible = "fsl,mpc8572-gpio"; |
| reg = <0xf000 0x100>; |
| interrupts = <47 0x2 0 0>; |
| gpio-controller; |
| }; |
| |
| L2: l2-cache-controller@20000 { |
| compatible = "fsl,p1022-l2-cache-controller"; |
| reg = <0x20000 0x1000>; |
| cache-line-size = <32>; // 32 bytes |
| cache-size = <0x40000>; // L2, 256K |
| interrupts = <16 2 0 0>; |
| }; |
| |
| dma@21300 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,eloplus-dma"; |
| reg = <0x21300 0x4>; |
| ranges = <0x0 0x21100 0x200>; |
| cell-index = <0>; |
| dma-channel@0 { |
| compatible = "fsl,eloplus-dma-channel"; |
| reg = <0x0 0x80>; |
| cell-index = <0>; |
| interrupts = <20 2 0 0>; |
| }; |
| dma-channel@80 { |
| compatible = "fsl,eloplus-dma-channel"; |
| reg = <0x80 0x80>; |
| cell-index = <1>; |
| interrupts = <21 2 0 0>; |
| }; |
| dma-channel@100 { |
| compatible = "fsl,eloplus-dma-channel"; |
| reg = <0x100 0x80>; |
| cell-index = <2>; |
| interrupts = <22 2 0 0>; |
| }; |
| dma-channel@180 { |
| compatible = "fsl,eloplus-dma-channel"; |
| reg = <0x180 0x80>; |
| cell-index = <3>; |
| interrupts = <23 2 0 0>; |
| }; |
| }; |
| |
| usb@22000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl-usb2-dr"; |
| reg = <0x22000 0x1000>; |
| interrupts = <28 0x2 0 0>; |
| phy_type = "ulpi"; |
| }; |
| |
| mdio@24000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,etsec2-mdio"; |
| reg = <0x24000 0x1000 0xb0030 0x4>; |
| |
| phy0: ethernet-phy@0 { |
| interrupts = <3 1 0 0>; |
| reg = <0x1>; |
| }; |
| phy1: ethernet-phy@1 { |
| interrupts = <9 1 0 0>; |
| reg = <0x2>; |
| }; |
| }; |
| |
| mdio@25000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,etsec2-mdio"; |
| reg = <0x25000 0x1000 0xb1030 0x4>; |
| }; |
| |
| enet0: ethernet@B0000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| cell-index = <0>; |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "fsl,etsec2"; |
| fsl,num_rx_queues = <0x8>; |
| fsl,num_tx_queues = <0x8>; |
| fsl,magic-packet; |
| fsl,wake-on-filer; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| phy-handle = <&phy0>; |
| phy-connection-type = "rgmii-id"; |
| queue-group@0{ |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0xB0000 0x1000>; |
| interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>; |
| }; |
| queue-group@1{ |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0xB4000 0x1000>; |
| interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>; |
| }; |
| }; |
| |
| enet1: ethernet@B1000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| cell-index = <0>; |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "fsl,etsec2"; |
| fsl,num_rx_queues = <0x8>; |
| fsl,num_tx_queues = <0x8>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| phy-handle = <&phy1>; |
| phy-connection-type = "rgmii-id"; |
| queue-group@0{ |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0xB1000 0x1000>; |
| interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>; |
| }; |
| queue-group@1{ |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0xB5000 0x1000>; |
| interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>; |
| }; |
| }; |
| |
| sdhci@2e000 { |
| compatible = "fsl,p1022-esdhc", "fsl,esdhc"; |
| reg = <0x2e000 0x1000>; |
| interrupts = <72 0x2 0 0>; |
| fsl,sdhci-auto-cmd12; |
| /* Filled in by U-Boot */ |
| clock-frequency = <0>; |
| }; |
| |
| crypto@30000 { |
| compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0", |
| "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1", |
| "fsl,sec2.0"; |
| reg = <0x30000 0x10000>; |
| interrupts = <45 2 0 0 58 2 0 0>; |
| fsl,num-channels = <4>; |
| fsl,channel-fifo-len = <24>; |
| fsl,exec-units-mask = <0x97c>; |
| fsl,descriptor-types-mask = <0x3a30abf>; |
| }; |
| |
| sata@18000 { |
| compatible = "fsl,p1022-sata", "fsl,pq-sata-v2"; |
| reg = <0x18000 0x1000>; |
| cell-index = <1>; |
| interrupts = <74 0x2 0 0>; |
| }; |
| |
| sata@19000 { |
| compatible = "fsl,p1022-sata", "fsl,pq-sata-v2"; |
| reg = <0x19000 0x1000>; |
| cell-index = <2>; |
| interrupts = <41 0x2 0 0>; |
| }; |
| |
| power@e0070{ |
| compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc"; |
| reg = <0xe0070 0x20>; |
| }; |
| |
| display@10000 { |
| compatible = "fsl,diu", "fsl,p1022-diu"; |
| reg = <0x10000 1000>; |
| interrupts = <64 2 0 0>; |
| }; |
| |
| timer@41100 { |
| compatible = "fsl,mpic-global-timer"; |
| reg = <0x41100 0x100 0x41300 4>; |
| interrupts = <0 0 3 0 |
| 1 0 3 0 |
| 2 0 3 0 |
| 3 0 3 0>; |
| }; |
| |
| timer@42100 { |
| compatible = "fsl,mpic-global-timer"; |
| reg = <0x42100 0x100 0x42300 4>; |
| interrupts = <4 0 3 0 |
| 5 0 3 0 |
| 6 0 3 0 |
| 7 0 3 0>; |
| }; |
| |
| mpic: pic@40000 { |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <4>; |
| reg = <0x40000 0x40000>; |
| compatible = "fsl,mpic"; |
| device_type = "open-pic"; |
| }; |
| |
| msi@41600 { |
| compatible = "fsl,p1022-msi", "fsl,mpic-msi"; |
| reg = <0x41600 0x80>; |
| msi-available-ranges = <0 0x100>; |
| interrupts = < |
| 0xe0 0 0 0 |
| 0xe1 0 0 0 |
| 0xe2 0 0 0 |
| 0xe3 0 0 0 |
| 0xe4 0 0 0 |
| 0xe5 0 0 0 |
| 0xe6 0 0 0 |
| 0xe7 0 0 0>; |
| }; |
| |
| global-utilities@e0000 { //global utilities block |
| compatible = "fsl,p1022-guts"; |
| reg = <0xe0000 0x1000>; |
| fsl,has-rstcr; |
| }; |
| }; |
| |
| pci0: pcie@fffe09000 { |
| compatible = "fsl,p1022-pcie"; |
| device_type = "pci"; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0xf 0xffe09000 0 0x1000>; |
| bus-range = <0 255>; |
| ranges = <0x2000000 0x0 0xa0000000 0xc 0x20000000 0x0 0x20000000 |
| 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; |
| clock-frequency = <33333333>; |
| interrupts = <16 2 0 0>; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| interrupt-map = < |
| /* IDSEL 0x0 */ |
| 0000 0 0 1 &mpic 4 1 |
| 0000 0 0 2 &mpic 5 1 |
| 0000 0 0 3 &mpic 6 1 |
| 0000 0 0 4 &mpic 7 1 |
| >; |
| pcie@0 { |
| reg = <0x0 0x0 0x0 0x0 0x0>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| ranges = <0x2000000 0x0 0xe0000000 |
| 0x2000000 0x0 0xe0000000 |
| 0x0 0x20000000 |
| |
| 0x1000000 0x0 0x0 |
| 0x1000000 0x0 0x0 |
| 0x0 0x100000>; |
| }; |
| }; |
| |
| pci1: pcie@fffe0a000 { |
| compatible = "fsl,p1022-pcie"; |
| device_type = "pci"; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0xf 0xffe0a000 0 0x1000>; |
| bus-range = <0 255>; |
| ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000 |
| 0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>; |
| clock-frequency = <33333333>; |
| interrupts = <16 2 0 0>; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| interrupt-map = < |
| /* IDSEL 0x0 */ |
| 0000 0 0 1 &mpic 0 1 |
| 0000 0 0 2 &mpic 1 1 |
| 0000 0 0 3 &mpic 2 1 |
| 0000 0 0 4 &mpic 3 1 |
| >; |
| pcie@0 { |
| reg = <0x0 0x0 0x0 0x0 0x0>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| ranges = <0x2000000 0x0 0xe0000000 |
| 0x2000000 0x0 0xe0000000 |
| 0x0 0x20000000 |
| |
| 0x1000000 0x0 0x0 |
| 0x1000000 0x0 0x0 |
| 0x0 0x100000>; |
| }; |
| }; |
| |
| |
| pci2: pcie@fffe0b000 { |
| compatible = "fsl,p1022-pcie"; |
| device_type = "pci"; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0xf 0xffe0b000 0 0x1000>; |
| bus-range = <0 255>; |
| ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000 |
| 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; |
| clock-frequency = <33333333>; |
| interrupts = <16 2 0 0>; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| interrupt-map = < |
| /* IDSEL 0x0 */ |
| 0000 0 0 1 &mpic 8 1 |
| 0000 0 0 2 &mpic 9 1 |
| 0000 0 0 3 &mpic 10 1 |
| 0000 0 0 4 &mpic 11 1 |
| >; |
| pcie@0 { |
| reg = <0x0 0x0 0x0 0x0 0x0>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| ranges = <0x2000000 0x0 0xe0000000 |
| 0x2000000 0x0 0xe0000000 |
| 0x0 0x20000000 |
| |
| 0x1000000 0x0 0x0 |
| 0x1000000 0x0 0x0 |
| 0x0 0x100000>; |
| }; |
| }; |
| }; |