| |
| ivtv release notes |
| ================== |
| |
| This is a v4l2 device driver for the Conexant cx23415/6 MPEG encoder/decoder. |
| The cx23415 can do both encoding and decoding, the cx23416 can only do MPEG |
| encoding. Currently the only card featuring full decoding support is the |
| Hauppauge PVR-350. |
| |
| NOTE: this driver requires the latest encoder firmware (version 2.06.039, size |
| 376836 bytes). Get the firmware from here: |
| |
| http://dl.ivtvdriver.org/ivtv/firmware/firmware.tar.gz |
| |
| NOTE: 'normal' TV applications do not work with this driver, you need |
| an application that can handle MPEG input such as mplayer, xine, MythTV, |
| etc. |
| |
| The primary goal of the IVTV project is to provide a "clean room" Linux |
| Open Source driver implementation for video capture cards based on the |
| iCompression iTVC15 or Conexant CX23415/CX23416 MPEG Codec. |
| |
| Features: |
| * Hardware mpeg2 capture of broadcast video (and sound) via the tuner or |
| S-Video/Composite and audio line-in. |
| * Hardware mpeg2 capture of FM radio where hardware support exists |
| * Supports NTSC, PAL, SECAM with stereo sound |
| * Supports SAP and bilingual transmissions. |
| * Supports raw VBI (closed captions and teletext). |
| * Supports sliced VBI (closed captions and teletext) and is able to insert |
| this into the captured MPEG stream. |
| * Supports raw YUV and PCM input. |
| |
| Additional features for the PVR-350 (CX23415 based): |
| * Provides hardware mpeg2 playback |
| * Provides comprehensive OSD (On Screen Display: ie. graphics overlaying the |
| video signal) |
| * Provides a framebuffer (allowing X applications to appear on the video |
| device) (this framebuffer is not yet part of the kernel. In the meantime it |
| is available from www.ivtvdriver.org). |
| * Supports raw YUV output. |
| |
| IMPORTANT: In case of problems first read this page: |
| http://www.ivtvdriver.org/index.php/Troubleshooting |
| |
| See also: |
| |
| Homepage + Wiki |
| http://www.ivtvdriver.org |
| |
| IRC |
| irc://irc.freenode.net/ivtv-dev |
| |
| ---------------------------------------------------------- |
| |
| Devices |
| ======= |
| |
| A maximum of 12 ivtv boards are allowed at the moment. |
| |
| Cards that don't have a video output capability (i.e. non PVR350 cards) |
| lack the vbi8, vbi16, video16 and video48 devices. They also do not |
| support the framebuffer device /dev/fbx for OSD. |
| |
| The radio0 device may or may not be present, depending on whether the |
| card has a radio tuner or not. |
| |
| Here is a list of the base v4l devices: |
| crw-rw---- 1 root video 81, 0 Jun 19 22:22 /dev/video0 |
| crw-rw---- 1 root video 81, 16 Jun 19 22:22 /dev/video16 |
| crw-rw---- 1 root video 81, 24 Jun 19 22:22 /dev/video24 |
| crw-rw---- 1 root video 81, 32 Jun 19 22:22 /dev/video32 |
| crw-rw---- 1 root video 81, 48 Jun 19 22:22 /dev/video48 |
| crw-rw---- 1 root video 81, 64 Jun 19 22:22 /dev/radio0 |
| crw-rw---- 1 root video 81, 224 Jun 19 22:22 /dev/vbi0 |
| crw-rw---- 1 root video 81, 228 Jun 19 22:22 /dev/vbi8 |
| crw-rw---- 1 root video 81, 232 Jun 19 22:22 /dev/vbi16 |
| |
| Base devices |
| ============ |
| |
| For every extra card you have the numbers increased by one. For example, |
| /dev/video0 is listed as the 'base' encoding capture device so we have: |
| |
| /dev/video0 is the encoding capture device for the first card (card 0) |
| /dev/video1 is the encoding capture device for the second card (card 1) |
| /dev/video2 is the encoding capture device for the third card (card 2) |
| |
| Note that if the first card doesn't have a feature (eg no decoder, so no |
| video16, the second card will still use video17. The simple rule is 'add |
| the card number to the base device number'. If you have other capture |
| cards (e.g. WinTV PCI) that are detected first, then you have to tell |
| the ivtv module about it so that it will start counting at 1 (or 2, or |
| whatever). Otherwise the device numbers can get confusing. The ivtv |
| 'ivtv_first_minor' module option can be used for that. |
| |
| |
| /dev/video0 |
| The encoding capture device(s). |
| Read-only. |
| |
| Reading from this device gets you the MPEG1/2 program stream. |
| Example: |
| |
| cat /dev/video0 > my.mpg (you need to hit ctrl-c to exit) |
| |
| |
| /dev/video16 |
| The decoder output device(s) |
| Write-only. Only present if the MPEG decoder (i.e. CX23415) exists. |
| |
| An mpeg2 stream sent to this device will appear on the selected video |
| display, audio will appear on the line-out/audio out. It is only |
| available for cards that support video out. Example: |
| |
| cat my.mpg >/dev/video16 |
| |
| |
| /dev/video24 |
| The raw audio capture device(s). |
| Read-only |
| |
| The raw audio PCM stereo stream from the currently selected |
| tuner or audio line-in. Reading from this device results in a raw |
| (signed 16 bit Little Endian, 48000 Hz, stereo pcm) capture. |
| This device only captures audio. This should be replaced by an ALSA |
| device in the future. |
| Note that there is no corresponding raw audio output device, this is |
| not supported in the decoder firmware. |
| |
| |
| /dev/video32 |
| The raw video capture device(s) |
| Read-only |
| |
| The raw YUV video output from the current video input. The YUV format |
| is non-standard (V4L2_PIX_FMT_HM12). |
| |
| Note that the YUV and PCM streams are not synchronized, so they are of |
| limited use. |
| |
| |
| /dev/video48 |
| The raw video display device(s) |
| Write-only. Only present if the MPEG decoder (i.e. CX23415) exists. |
| |
| Writes a YUV stream to the decoder of the card. |
| |
| |
| /dev/radio0 |
| The radio tuner device(s) |
| Cannot be read or written. |
| |
| Used to enable the radio tuner and tune to a frequency. You cannot |
| read or write audio streams with this device. Once you use this |
| device to tune the radio, use /dev/video24 to read the raw pcm stream |
| or /dev/video0 to get an mpeg2 stream with black video. |
| |
| |
| /dev/vbi0 |
| The 'vertical blank interval' (Teletext, CC, WSS etc) capture device(s) |
| Read-only |
| |
| Captures the raw (or sliced) video data sent during the Vertical Blank |
| Interval. This data is used to encode teletext, closed captions, VPS, |
| widescreen signalling, electronic program guide information, and other |
| services. |
| |
| |
| /dev/vbi8 |
| Processed vbi feedback device(s) |
| Read-only. Only present if the MPEG decoder (i.e. CX23415) exists. |
| |
| The sliced VBI data embedded in an MPEG stream is reproduced on this |
| device. So while playing back a recording on /dev/video16, you can |
| read the embedded VBI data from /dev/vbi8. |
| |
| |
| /dev/vbi16 |
| The vbi 'display' device(s) |
| Write-only. Only present if the MPEG decoder (i.e. CX23415) exists. |
| |
| Can be used to send sliced VBI data to the video-out connector. |
| |
| --------------------------------- |
| |
| Hans Verkuil <hverkuil@xs4all.nl> |