| /* | 
 |  | 
 |     bt8xx GPIO abuser | 
 |  | 
 |     Copyright (C) 2008 Michael Buesch <mb@bu3sch.de> | 
 |  | 
 |     Please do _only_ contact the people listed _above_ with issues related to this driver. | 
 |     All the other people listed below are not related to this driver. Their names | 
 |     are only here, because this driver is derived from the bt848 driver. | 
 |  | 
 |  | 
 |     Derived from the bt848 driver: | 
 |  | 
 |     Copyright (C) 1996,97,98 Ralph  Metzler | 
 | 			   & Marcus Metzler | 
 |     (c) 1999-2002 Gerd Knorr | 
 |  | 
 |     some v4l2 code lines are taken from Justin's bttv2 driver which is | 
 |     (c) 2000 Justin Schoeman | 
 |  | 
 |     V4L1 removal from: | 
 |     (c) 2005-2006 Nickolay V. Shmyrev | 
 |  | 
 |     Fixes to be fully V4L2 compliant by | 
 |     (c) 2006 Mauro Carvalho Chehab | 
 |  | 
 |     Cropping and overscan support | 
 |     Copyright (C) 2005, 2006 Michael H. Schimek | 
 |     Sponsored by OPQ Systems AB | 
 |  | 
 |     This program is free software; you can redistribute it and/or modify | 
 |     it under the terms of the GNU General Public License as published by | 
 |     the Free Software Foundation; either version 2 of the License, or | 
 |     (at your option) any later version. | 
 |  | 
 |     This program is distributed in the hope that it will be useful, | 
 |     but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |     GNU General Public License for more details. | 
 |  | 
 |     You should have received a copy of the GNU General Public License | 
 |     along with this program; if not, write to the Free Software | 
 |     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
 | */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/pci.h> | 
 | #include <linux/spinlock.h> | 
 | #include <linux/gpio.h> | 
 |  | 
 | /* Steal the hardware definitions from the bttv driver. */ | 
 | #include "../media/video/bt8xx/bt848.h" | 
 |  | 
 |  | 
 | #define BT8XXGPIO_NR_GPIOS		24 /* We have 24 GPIO pins */ | 
 |  | 
 |  | 
 | struct bt8xxgpio { | 
 | 	spinlock_t lock; | 
 |  | 
 | 	void __iomem *mmio; | 
 | 	struct pci_dev *pdev; | 
 | 	struct gpio_chip gpio; | 
 |  | 
 | #ifdef CONFIG_PM | 
 | 	u32 saved_outen; | 
 | 	u32 saved_data; | 
 | #endif | 
 | }; | 
 |  | 
 | #define bgwrite(dat, adr)	writel((dat), bg->mmio+(adr)) | 
 | #define bgread(adr)		readl(bg->mmio+(adr)) | 
 |  | 
 |  | 
 | static int modparam_gpiobase = -1/* dynamic */; | 
 | module_param_named(gpiobase, modparam_gpiobase, int, 0444); | 
 | MODULE_PARM_DESC(gpiobase, "The GPIO number base. -1 means dynamic, which is the default."); | 
 |  | 
 |  | 
 | static int bt8xxgpio_gpio_direction_input(struct gpio_chip *gpio, unsigned nr) | 
 | { | 
 | 	struct bt8xxgpio *bg = container_of(gpio, struct bt8xxgpio, gpio); | 
 | 	unsigned long flags; | 
 | 	u32 outen, data; | 
 |  | 
 | 	spin_lock_irqsave(&bg->lock, flags); | 
 |  | 
 | 	data = bgread(BT848_GPIO_DATA); | 
 | 	data &= ~(1 << nr); | 
 | 	bgwrite(data, BT848_GPIO_DATA); | 
 |  | 
 | 	outen = bgread(BT848_GPIO_OUT_EN); | 
 | 	outen &= ~(1 << nr); | 
 | 	bgwrite(outen, BT848_GPIO_OUT_EN); | 
 |  | 
 | 	spin_unlock_irqrestore(&bg->lock, flags); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int bt8xxgpio_gpio_get(struct gpio_chip *gpio, unsigned nr) | 
 | { | 
 | 	struct bt8xxgpio *bg = container_of(gpio, struct bt8xxgpio, gpio); | 
 | 	unsigned long flags; | 
 | 	u32 val; | 
 |  | 
 | 	spin_lock_irqsave(&bg->lock, flags); | 
 | 	val = bgread(BT848_GPIO_DATA); | 
 | 	spin_unlock_irqrestore(&bg->lock, flags); | 
 |  | 
 | 	return !!(val & (1 << nr)); | 
 | } | 
 |  | 
 | static int bt8xxgpio_gpio_direction_output(struct gpio_chip *gpio, | 
 | 					unsigned nr, int val) | 
 | { | 
 | 	struct bt8xxgpio *bg = container_of(gpio, struct bt8xxgpio, gpio); | 
 | 	unsigned long flags; | 
 | 	u32 outen, data; | 
 |  | 
 | 	spin_lock_irqsave(&bg->lock, flags); | 
 |  | 
 | 	outen = bgread(BT848_GPIO_OUT_EN); | 
 | 	outen |= (1 << nr); | 
 | 	bgwrite(outen, BT848_GPIO_OUT_EN); | 
 |  | 
 | 	data = bgread(BT848_GPIO_DATA); | 
 | 	if (val) | 
 | 		data |= (1 << nr); | 
 | 	else | 
 | 		data &= ~(1 << nr); | 
 | 	bgwrite(data, BT848_GPIO_DATA); | 
 |  | 
 | 	spin_unlock_irqrestore(&bg->lock, flags); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void bt8xxgpio_gpio_set(struct gpio_chip *gpio, | 
 | 			    unsigned nr, int val) | 
 | { | 
 | 	struct bt8xxgpio *bg = container_of(gpio, struct bt8xxgpio, gpio); | 
 | 	unsigned long flags; | 
 | 	u32 data; | 
 |  | 
 | 	spin_lock_irqsave(&bg->lock, flags); | 
 |  | 
 | 	data = bgread(BT848_GPIO_DATA); | 
 | 	if (val) | 
 | 		data |= (1 << nr); | 
 | 	else | 
 | 		data &= ~(1 << nr); | 
 | 	bgwrite(data, BT848_GPIO_DATA); | 
 |  | 
 | 	spin_unlock_irqrestore(&bg->lock, flags); | 
 | } | 
 |  | 
 | static void bt8xxgpio_gpio_setup(struct bt8xxgpio *bg) | 
 | { | 
 | 	struct gpio_chip *c = &bg->gpio; | 
 |  | 
 | 	c->label = dev_name(&bg->pdev->dev); | 
 | 	c->owner = THIS_MODULE; | 
 | 	c->direction_input = bt8xxgpio_gpio_direction_input; | 
 | 	c->get = bt8xxgpio_gpio_get; | 
 | 	c->direction_output = bt8xxgpio_gpio_direction_output; | 
 | 	c->set = bt8xxgpio_gpio_set; | 
 | 	c->dbg_show = NULL; | 
 | 	c->base = modparam_gpiobase; | 
 | 	c->ngpio = BT8XXGPIO_NR_GPIOS; | 
 | 	c->can_sleep = 0; | 
 | } | 
 |  | 
 | static int bt8xxgpio_probe(struct pci_dev *dev, | 
 | 			const struct pci_device_id *pci_id) | 
 | { | 
 | 	struct bt8xxgpio *bg; | 
 | 	int err; | 
 |  | 
 | 	bg = kzalloc(sizeof(*bg), GFP_KERNEL); | 
 | 	if (!bg) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	bg->pdev = dev; | 
 | 	spin_lock_init(&bg->lock); | 
 |  | 
 | 	err = pci_enable_device(dev); | 
 | 	if (err) { | 
 | 		printk(KERN_ERR "bt8xxgpio: Can't enable device.\n"); | 
 | 		goto err_freebg; | 
 | 	} | 
 | 	if (!request_mem_region(pci_resource_start(dev, 0), | 
 | 				pci_resource_len(dev, 0), | 
 | 				"bt8xxgpio")) { | 
 | 		printk(KERN_WARNING "bt8xxgpio: Can't request iomem (0x%llx).\n", | 
 | 		       (unsigned long long)pci_resource_start(dev, 0)); | 
 | 		err = -EBUSY; | 
 | 		goto err_disable; | 
 | 	} | 
 | 	pci_set_master(dev); | 
 | 	pci_set_drvdata(dev, bg); | 
 |  | 
 | 	bg->mmio = ioremap(pci_resource_start(dev, 0), 0x1000); | 
 | 	if (!bg->mmio) { | 
 | 		printk(KERN_ERR "bt8xxgpio: ioremap() failed\n"); | 
 | 		err = -EIO; | 
 | 		goto err_release_mem; | 
 | 	} | 
 |  | 
 | 	/* Disable interrupts */ | 
 | 	bgwrite(0, BT848_INT_MASK); | 
 |  | 
 | 	/* gpio init */ | 
 | 	bgwrite(0, BT848_GPIO_DMA_CTL); | 
 | 	bgwrite(0, BT848_GPIO_REG_INP); | 
 | 	bgwrite(0, BT848_GPIO_OUT_EN); | 
 |  | 
 | 	bt8xxgpio_gpio_setup(bg); | 
 | 	err = gpiochip_add(&bg->gpio); | 
 | 	if (err) { | 
 | 		printk(KERN_ERR "bt8xxgpio: Failed to register GPIOs\n"); | 
 | 		goto err_release_mem; | 
 | 	} | 
 |  | 
 | 	printk(KERN_INFO "bt8xxgpio: Abusing BT8xx card for GPIOs %d to %d\n", | 
 | 	       bg->gpio.base, bg->gpio.base + BT8XXGPIO_NR_GPIOS - 1); | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_release_mem: | 
 | 	release_mem_region(pci_resource_start(dev, 0), | 
 | 			   pci_resource_len(dev, 0)); | 
 | 	pci_set_drvdata(dev, NULL); | 
 | err_disable: | 
 | 	pci_disable_device(dev); | 
 | err_freebg: | 
 | 	kfree(bg); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static void bt8xxgpio_remove(struct pci_dev *pdev) | 
 | { | 
 | 	struct bt8xxgpio *bg = pci_get_drvdata(pdev); | 
 |  | 
 | 	gpiochip_remove(&bg->gpio); | 
 |  | 
 | 	bgwrite(0, BT848_INT_MASK); | 
 | 	bgwrite(~0x0, BT848_INT_STAT); | 
 | 	bgwrite(0x0, BT848_GPIO_OUT_EN); | 
 |  | 
 | 	iounmap(bg->mmio); | 
 | 	release_mem_region(pci_resource_start(pdev, 0), | 
 | 			   pci_resource_len(pdev, 0)); | 
 | 	pci_disable_device(pdev); | 
 |  | 
 | 	pci_set_drvdata(pdev, NULL); | 
 | 	kfree(bg); | 
 | } | 
 |  | 
 | #ifdef CONFIG_PM | 
 | static int bt8xxgpio_suspend(struct pci_dev *pdev, pm_message_t state) | 
 | { | 
 | 	struct bt8xxgpio *bg = pci_get_drvdata(pdev); | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&bg->lock, flags); | 
 |  | 
 | 	bg->saved_outen = bgread(BT848_GPIO_OUT_EN); | 
 | 	bg->saved_data = bgread(BT848_GPIO_DATA); | 
 |  | 
 | 	bgwrite(0, BT848_INT_MASK); | 
 | 	bgwrite(~0x0, BT848_INT_STAT); | 
 | 	bgwrite(0x0, BT848_GPIO_OUT_EN); | 
 |  | 
 | 	spin_unlock_irqrestore(&bg->lock, flags); | 
 |  | 
 | 	pci_save_state(pdev); | 
 | 	pci_disable_device(pdev); | 
 | 	pci_set_power_state(pdev, pci_choose_state(pdev, state)); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int bt8xxgpio_resume(struct pci_dev *pdev) | 
 | { | 
 | 	struct bt8xxgpio *bg = pci_get_drvdata(pdev); | 
 | 	unsigned long flags; | 
 | 	int err; | 
 |  | 
 | 	pci_set_power_state(pdev, 0); | 
 | 	err = pci_enable_device(pdev); | 
 | 	if (err) | 
 | 		return err; | 
 | 	pci_restore_state(pdev); | 
 |  | 
 | 	spin_lock_irqsave(&bg->lock, flags); | 
 |  | 
 | 	bgwrite(0, BT848_INT_MASK); | 
 | 	bgwrite(0, BT848_GPIO_DMA_CTL); | 
 | 	bgwrite(0, BT848_GPIO_REG_INP); | 
 | 	bgwrite(bg->saved_outen, BT848_GPIO_OUT_EN); | 
 | 	bgwrite(bg->saved_data & bg->saved_outen, | 
 | 		BT848_GPIO_DATA); | 
 |  | 
 | 	spin_unlock_irqrestore(&bg->lock, flags); | 
 |  | 
 | 	return 0; | 
 | } | 
 | #else | 
 | #define bt8xxgpio_suspend NULL | 
 | #define bt8xxgpio_resume NULL | 
 | #endif /* CONFIG_PM */ | 
 |  | 
 | static struct pci_device_id bt8xxgpio_pci_tbl[] = { | 
 | 	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT848) }, | 
 | 	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT849) }, | 
 | 	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT878) }, | 
 | 	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT879) }, | 
 | 	{ 0, }, | 
 | }; | 
 | MODULE_DEVICE_TABLE(pci, bt8xxgpio_pci_tbl); | 
 |  | 
 | static struct pci_driver bt8xxgpio_pci_driver = { | 
 | 	.name		= "bt8xxgpio", | 
 | 	.id_table	= bt8xxgpio_pci_tbl, | 
 | 	.probe		= bt8xxgpio_probe, | 
 | 	.remove		= bt8xxgpio_remove, | 
 | 	.suspend	= bt8xxgpio_suspend, | 
 | 	.resume		= bt8xxgpio_resume, | 
 | }; | 
 |  | 
 | static int __init bt8xxgpio_init(void) | 
 | { | 
 | 	return pci_register_driver(&bt8xxgpio_pci_driver); | 
 | } | 
 | module_init(bt8xxgpio_init) | 
 |  | 
 | static void __exit bt8xxgpio_exit(void) | 
 | { | 
 | 	pci_unregister_driver(&bt8xxgpio_pci_driver); | 
 | } | 
 | module_exit(bt8xxgpio_exit) | 
 |  | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_AUTHOR("Michael Buesch"); | 
 | MODULE_DESCRIPTION("Abuse a BT8xx framegrabber card as generic GPIO card"); |