|  | /* | 
|  | Copyright (C) 2004 - 2008 rt2x00 SourceForge Project | 
|  | <http://rt2x00.serialmonkey.com> | 
|  |  | 
|  | This program is free software; you can redistribute it and/or modify | 
|  | it under the terms of the GNU General Public License as published by | 
|  | the Free Software Foundation; either version 2 of the License, or | 
|  | (at your option) any later version. | 
|  |  | 
|  | This program is distributed in the hope that it will be useful, | 
|  | but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | 
|  | GNU General Public License for more details. | 
|  |  | 
|  | You should have received a copy of the GNU General Public License | 
|  | along with this program; if not, write to the | 
|  | Free Software Foundation, Inc., | 
|  | 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | Module: rt2x00 | 
|  | Abstract: rt2x00 generic register information. | 
|  | */ | 
|  |  | 
|  | #ifndef RT2X00REG_H | 
|  | #define RT2X00REG_H | 
|  |  | 
|  | /* | 
|  | * Antenna values | 
|  | */ | 
|  | enum antenna { | 
|  | ANTENNA_SW_DIVERSITY = 0, | 
|  | ANTENNA_A = 1, | 
|  | ANTENNA_B = 2, | 
|  | ANTENNA_HW_DIVERSITY = 3, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Led mode values. | 
|  | */ | 
|  | enum led_mode { | 
|  | LED_MODE_DEFAULT = 0, | 
|  | LED_MODE_TXRX_ACTIVITY = 1, | 
|  | LED_MODE_SIGNAL_STRENGTH = 2, | 
|  | LED_MODE_ASUS = 3, | 
|  | LED_MODE_ALPHA = 4, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * TSF sync values | 
|  | */ | 
|  | enum tsf_sync { | 
|  | TSF_SYNC_NONE = 0, | 
|  | TSF_SYNC_INFRA = 1, | 
|  | TSF_SYNC_BEACON = 2, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Device states | 
|  | */ | 
|  | enum dev_state { | 
|  | STATE_DEEP_SLEEP = 0, | 
|  | STATE_SLEEP = 1, | 
|  | STATE_STANDBY = 2, | 
|  | STATE_AWAKE = 3, | 
|  |  | 
|  | /* | 
|  | * Additional device states, these values are | 
|  | * not strict since they are not directly passed | 
|  | * into the device. | 
|  | */ | 
|  | STATE_RADIO_ON, | 
|  | STATE_RADIO_OFF, | 
|  | STATE_RADIO_RX_ON, | 
|  | STATE_RADIO_RX_OFF, | 
|  | STATE_RADIO_RX_ON_LINK, | 
|  | STATE_RADIO_RX_OFF_LINK, | 
|  | STATE_RADIO_IRQ_ON, | 
|  | STATE_RADIO_IRQ_OFF, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * IFS backoff values | 
|  | */ | 
|  | enum ifs { | 
|  | IFS_BACKOFF = 0, | 
|  | IFS_SIFS = 1, | 
|  | IFS_NEW_BACKOFF = 2, | 
|  | IFS_NONE = 3, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Cipher types for hardware encryption | 
|  | */ | 
|  | enum cipher { | 
|  | CIPHER_NONE = 0, | 
|  | CIPHER_WEP64 = 1, | 
|  | CIPHER_WEP128 = 2, | 
|  | CIPHER_TKIP = 3, | 
|  | CIPHER_AES = 4, | 
|  | /* | 
|  | * The following fields were added by rt61pci and rt73usb. | 
|  | */ | 
|  | CIPHER_CKIP64 = 5, | 
|  | CIPHER_CKIP128 = 6, | 
|  | CIPHER_TKIP_NO_MIC = 7, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Register handlers. | 
|  | * We store the position of a register field inside a field structure, | 
|  | * This will simplify the process of setting and reading a certain field | 
|  | * inside the register while making sure the process remains byte order safe. | 
|  | */ | 
|  | struct rt2x00_field8 { | 
|  | u8 bit_offset; | 
|  | u8 bit_mask; | 
|  | }; | 
|  |  | 
|  | struct rt2x00_field16 { | 
|  | u16 bit_offset; | 
|  | u16 bit_mask; | 
|  | }; | 
|  |  | 
|  | struct rt2x00_field32 { | 
|  | u32 bit_offset; | 
|  | u32 bit_mask; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Power of two check, this will check | 
|  | * if the mask that has been given contains | 
|  | * and contiguous set of bits. | 
|  | */ | 
|  | #define is_power_of_two(x)	( !((x) & ((x)-1)) ) | 
|  | #define low_bit_mask(x)		( ((x)-1) & ~(x) ) | 
|  | #define is_valid_mask(x)	is_power_of_two(1 + (x) + low_bit_mask(x)) | 
|  |  | 
|  | #define FIELD8(__mask)				\ | 
|  | ({						\ | 
|  | BUILD_BUG_ON(!(__mask) ||		\ | 
|  | !is_valid_mask(__mask) ||	\ | 
|  | (__mask) != (u8)(__mask));	\ | 
|  | (struct rt2x00_field8) {		\ | 
|  | __ffs(__mask), (__mask)		\ | 
|  | };					\ | 
|  | }) | 
|  |  | 
|  | #define FIELD16(__mask)				\ | 
|  | ({						\ | 
|  | BUILD_BUG_ON(!(__mask) ||		\ | 
|  | !is_valid_mask(__mask) ||	\ | 
|  | (__mask) != (u16)(__mask));\ | 
|  | (struct rt2x00_field16) {		\ | 
|  | __ffs(__mask), (__mask)		\ | 
|  | };					\ | 
|  | }) | 
|  |  | 
|  | #define FIELD32(__mask)				\ | 
|  | ({						\ | 
|  | BUILD_BUG_ON(!(__mask) ||		\ | 
|  | !is_valid_mask(__mask) ||	\ | 
|  | (__mask) != (u32)(__mask));\ | 
|  | (struct rt2x00_field32) {		\ | 
|  | __ffs(__mask), (__mask)		\ | 
|  | };					\ | 
|  | }) | 
|  |  | 
|  | static inline void rt2x00_set_field32(u32 *reg, | 
|  | const struct rt2x00_field32 field, | 
|  | const u32 value) | 
|  | { | 
|  | *reg &= ~(field.bit_mask); | 
|  | *reg |= (value << field.bit_offset) & field.bit_mask; | 
|  | } | 
|  |  | 
|  | static inline u32 rt2x00_get_field32(const u32 reg, | 
|  | const struct rt2x00_field32 field) | 
|  | { | 
|  | return (reg & field.bit_mask) >> field.bit_offset; | 
|  | } | 
|  |  | 
|  | static inline void rt2x00_set_field16(u16 *reg, | 
|  | const struct rt2x00_field16 field, | 
|  | const u16 value) | 
|  | { | 
|  | *reg &= ~(field.bit_mask); | 
|  | *reg |= (value << field.bit_offset) & field.bit_mask; | 
|  | } | 
|  |  | 
|  | static inline u16 rt2x00_get_field16(const u16 reg, | 
|  | const struct rt2x00_field16 field) | 
|  | { | 
|  | return (reg & field.bit_mask) >> field.bit_offset; | 
|  | } | 
|  |  | 
|  | static inline void rt2x00_set_field8(u8 *reg, | 
|  | const struct rt2x00_field8 field, | 
|  | const u8 value) | 
|  | { | 
|  | *reg &= ~(field.bit_mask); | 
|  | *reg |= (value << field.bit_offset) & field.bit_mask; | 
|  | } | 
|  |  | 
|  | static inline u8 rt2x00_get_field8(const u8 reg, | 
|  | const struct rt2x00_field8 field) | 
|  | { | 
|  | return (reg & field.bit_mask) >> field.bit_offset; | 
|  | } | 
|  |  | 
|  | #endif /* RT2X00REG_H */ |