| #ifndef _MAPPI3_PLD_H |
| #define _MAPPI3_PLD_H |
| |
| /* |
| * include/asm-m32r/mappi3/mappi3_pld.h |
| * |
| * Definitions for Extended IO Logic on MAPPI3 board. |
| * based on m32700ut_pld.h |
| * |
| * This file is subject to the terms and conditions of the GNU General |
| * Public License. See the file "COPYING" in the main directory of |
| * this archive for more details. |
| */ |
| |
| #ifndef __ASSEMBLY__ |
| /* FIXME: |
| * Some C functions use non-cache address, so can't define non-cache address. |
| */ |
| #define PLD_BASE (0x1c000000 /* + NONCACHE_OFFSET */) |
| #define __reg8 (volatile unsigned char *) |
| #define __reg16 (volatile unsigned short *) |
| #define __reg32 (volatile unsigned int *) |
| #else |
| #define PLD_BASE (0x1c000000 + NONCACHE_OFFSET) |
| #define __reg8 |
| #define __reg16 |
| #define __reg32 |
| #endif /* __ASSEMBLY__ */ |
| |
| /* CFC */ |
| #define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000) |
| #define PLD_CFSTS __reg16(PLD_BASE + 0x0002) |
| #define PLD_CFIMASK __reg16(PLD_BASE + 0x0004) |
| #define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006) |
| #define PLD_CFCR0 __reg16(PLD_BASE + 0x000a) |
| #define PLD_CFCR1 __reg16(PLD_BASE + 0x000c) |
| |
| /* MMC */ |
| #define PLD_MMCCR __reg16(PLD_BASE + 0x4000) |
| #define PLD_MMCMOD __reg16(PLD_BASE + 0x4002) |
| #define PLD_MMCSTS __reg16(PLD_BASE + 0x4006) |
| #define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a) |
| #define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c) |
| #define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e) |
| #define PLD_MMCDET __reg16(PLD_BASE + 0x4010) |
| #define PLD_MMCWP __reg16(PLD_BASE + 0x4012) |
| #define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000) |
| #define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000) |
| #define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000) |
| #define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006) |
| |
| /* Power Control of MMC and CF */ |
| #define PLD_CPCR __reg16(PLD_BASE + 0x14000) |
| |
| /* ICU */ |
| #define M32R_IRQ_PC104 (5) /* INT4(PC/104) */ |
| #define M32R_IRQ_I2C (28) /* I2C-BUS */ |
| #define PLD_IRQ_CFIREQ (6) /* INT5 CFC Card Interrupt */ |
| #define PLD_IRQ_CFC_INSERT (7) /* INT6 CFC Card Insert & Eject */ |
| #define PLD_IRQ_IDEIREQ (8) /* INT7 IDE Interrupt */ |
| #define PLD_IRQ_MMCCARD (43) /* MMC Card Insert */ |
| #define PLD_IRQ_MMCIRQ (44) /* MMC Transfer Done */ |
| |
| #if 0 |
| /* LED Control |
| * |
| * 1: DIP swich side |
| * 2: Reset switch side |
| */ |
| #define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002) |
| #define PLD_IOLED_1_ON 0x001 |
| #define PLD_IOLED_1_OFF 0x000 |
| #define PLD_IOLED_2_ON 0x002 |
| #define PLD_IOLED_2_OFF 0x000 |
| |
| /* DIP Switch |
| * 0: Write-protect of Flash Memory (0:protected, 1:non-protected) |
| * 1: - |
| * 2: - |
| * 3: - |
| */ |
| #define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004) |
| #define PLD_IOSWSTS_IOSW2 0x0200 |
| #define PLD_IOSWSTS_IOSW1 0x0100 |
| #define PLD_IOSWSTS_IOWP0 0x0001 |
| |
| #endif |
| |
| /* CRC */ |
| #define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000) |
| #define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002) |
| #define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004) |
| #define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006) |
| #define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008) |
| #define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a) |
| |
| #if 0 |
| /* RTC */ |
| #define PLD_RTCCR __reg16(PLD_BASE + 0x1c000) |
| #define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002) |
| #define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004) |
| #define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006) |
| #define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008) |
| |
| /* SIO0 */ |
| #define PLD_ESIO0CR __reg16(PLD_BASE + 0x20000) |
| #define PLD_ESIO0CR_TXEN 0x0001 |
| #define PLD_ESIO0CR_RXEN 0x0002 |
| #define PLD_ESIO0MOD0 __reg16(PLD_BASE + 0x20002) |
| #define PLD_ESIO0MOD0_CTSS 0x0040 |
| #define PLD_ESIO0MOD0_RTSS 0x0080 |
| #define PLD_ESIO0MOD1 __reg16(PLD_BASE + 0x20004) |
| #define PLD_ESIO0MOD1_LMFS 0x0010 |
| #define PLD_ESIO0STS __reg16(PLD_BASE + 0x20006) |
| #define PLD_ESIO0STS_TEMP 0x0001 |
| #define PLD_ESIO0STS_TXCP 0x0002 |
| #define PLD_ESIO0STS_RXCP 0x0004 |
| #define PLD_ESIO0STS_TXSC 0x0100 |
| #define PLD_ESIO0STS_RXSC 0x0200 |
| #define PLD_ESIO0STS_TXREADY (PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP) |
| #define PLD_ESIO0INTCR __reg16(PLD_BASE + 0x20008) |
| #define PLD_ESIO0INTCR_TXIEN 0x0002 |
| #define PLD_ESIO0INTCR_RXCEN 0x0004 |
| #define PLD_ESIO0BAUR __reg16(PLD_BASE + 0x2000a) |
| #define PLD_ESIO0TXB __reg16(PLD_BASE + 0x2000c) |
| #define PLD_ESIO0RXB __reg16(PLD_BASE + 0x2000e) |
| |
| /* SIM Card */ |
| #define PLD_SCCR __reg16(PLD_BASE + 0x38000) |
| #define PLD_SCMOD __reg16(PLD_BASE + 0x38004) |
| #define PLD_SCSTS __reg16(PLD_BASE + 0x38006) |
| #define PLD_SCINTCR __reg16(PLD_BASE + 0x38008) |
| #define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a) |
| #define PLD_SCTXB __reg16(PLD_BASE + 0x3800c) |
| #define PLD_SCRXB __reg16(PLD_BASE + 0x3800e) |
| |
| #endif |
| |
| /* Reset Control */ |
| #define PLD_REBOOT __reg16(PLD_BASE + 0x38000) |
| |
| #endif /* _MAPPI3_PLD.H */ |