Merge upstream into 'upstream' branch of netdev-2.6.git.
Hand fix merge conflict in drivers/net/tokenring/Kconfig.
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 4f27e55..7333b41 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -80,7 +80,7 @@
config COMPUTONE
tristate "Computone IntelliPort Plus serial support"
- depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP && (BROKEN || !SPARC32)
---help---
This driver supports the entire family of Intelliport II/Plus
controllers with the exception of the MicroChannel controllers and
@@ -138,7 +138,7 @@
config DIGIEPCA
tristate "Digiboard Intelligent Async Support"
- depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP && (!64BIT || BROKEN)
---help---
This is a driver for Digi International's Xx, Xeve, and Xem series
of cards which provide multiple serial ports. You would need
@@ -208,7 +208,7 @@
config SYNCLINKMP
tristate "SyncLink Multiport support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && (BROKEN || !SPARC32)
help
Enable support for the SyncLink Multiport (2 or 4 ports)
serial adapter, running asynchronous and HDLC communications up
@@ -735,7 +735,7 @@
config GEN_RTC
tristate "Generic /dev/rtc emulation"
- depends on RTC!=y && !IA64 && !ARM && !PPC64
+ depends on RTC!=y && !IA64 && !ARM && !PPC64 && !M32R && !SPARC32
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig
index 79c8e2d..32cdfb3 100644
--- a/drivers/infiniband/Kconfig
+++ b/drivers/infiniband/Kconfig
@@ -1,6 +1,7 @@
menu "InfiniBand support"
config INFINIBAND
+ depends on PCI || BROKEN
tristate "InfiniBand support"
---help---
Core support for InfiniBand (IB). Make sure to also select
diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig
index 6c7b8bf..801c98f 100644
--- a/drivers/isdn/hisax/Kconfig
+++ b/drivers/isdn/hisax/Kconfig
@@ -134,6 +134,7 @@
config HISAX_FRITZPCI
bool "AVM PnP/PCI (Fritz!PnP/PCI)"
+ depends on BROKEN || !PPC64
help
This enables HiSax support for the AVM "Fritz!PnP" and "Fritz!PCI".
See <file:Documentation/isdn/README.HiSax> on how to configure it.
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index 65ab64c..bc3e096 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -103,7 +103,7 @@
# on non-powerbook machines (but only on PMU based ones AFAIK)
config PMAC_BACKLIGHT
bool "Backlight control for LCD screens"
- depends on ADB_PMU
+ depends on ADB_PMU && (BROKEN || !PPC64)
help
Say Y here to build in code to manage the LCD backlight on a
Macintosh PowerBook. With this code, the backlight will be turned
diff --git a/drivers/md/md.c b/drivers/md/md.c
index d4c2756..486ee50 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -256,8 +256,7 @@
{
up(&mddev->reconfig_sem);
- if (mddev->thread)
- md_wakeup_thread(mddev->thread);
+ md_wakeup_thread(mddev->thread);
}
mdk_rdev_t * find_rdev_nr(mddev_t *mddev, int nr)
@@ -1714,6 +1713,7 @@
mddev->in_sync = 1;
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
+ md_wakeup_thread(mddev->thread);
if (mddev->sb_dirty)
md_update_sb(mddev);
@@ -2236,8 +2236,7 @@
export_rdev(rdev);
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
- if (mddev->thread)
- md_wakeup_thread(mddev->thread);
+ md_wakeup_thread(mddev->thread);
return err;
}
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index ac81e5e..3f57423 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -356,7 +356,7 @@
config VIDEO_M32R_AR_M64278
tristate "Use Colour AR module M64278(VGA)"
- depends on VIDEO_M32R_AR
+ depends on VIDEO_M32R_AR && PLAT_M32700UT
---help---
Say Y here to use the Renesas M64278E-800 camera module,
which supports VGA(640x480 pixcels) size of images.
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 1e50b8e..79e8aa6 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1147,7 +1147,7 @@
be called ibmveth.
config IBM_EMAC
- tristate "IBM PPC4xx EMAC driver support"
+ bool "IBM PPC4xx EMAC driver support"
depends on 4xx
select CRC32
---help---
@@ -1156,7 +1156,7 @@
config IBM_EMAC_ERRMSG
bool "Verbose error messages"
- depends on IBM_EMAC
+ depends on IBM_EMAC && BROKEN
config IBM_EMAC_RXB
int "Number of receive buffers"
diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c
index 6482d99..c7fb367 100644
--- a/drivers/net/ibm_emac/ibm_emac_core.c
+++ b/drivers/net/ibm_emac/ibm_emac_core.c
@@ -1712,11 +1712,10 @@
};
#ifdef CONFIG_NET_POLL_CONTROLLER
-static int emac_netpoll(struct net_device *ndev)
+static void emac_netpoll(struct net_device *ndev)
{
emac_rxeob_dev((void *)ndev, 0);
emac_txeob_dev((void *)ndev, 0);
- return 0;
}
#endif
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 368b8fb..01419af 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -66,8 +66,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.35"
-#define DRV_MODULE_RELDATE "August 6, 2005"
+#define DRV_MODULE_VERSION "3.36"
+#define DRV_MODULE_RELDATE "August 19, 2005"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -8970,6 +8970,8 @@
tp->phy_id = hw_phy_id;
if (hw_phy_id_masked == PHY_ID_BCM8002)
tp->tg3_flags2 |= TG3_FLG2_PHY_SERDES;
+ else
+ tp->tg3_flags2 &= ~TG3_FLG2_PHY_SERDES;
} else {
if (tp->phy_id != PHY_ID_INVALID) {
/* Do nothing, phy ID already set up in
diff --git a/drivers/net/tokenring/Kconfig b/drivers/net/tokenring/Kconfig
index 7d5c23e..e4cfc80 100644
--- a/drivers/net/tokenring/Kconfig
+++ b/drivers/net/tokenring/Kconfig
@@ -84,7 +84,7 @@
config TMS380TR
tristate "Generic TMS380 Token Ring ISA/PCI adapter support"
- depends on TR && (PCI || ISA || MCA)
+ depends on TR && (PCI || ISA && ISA_DMA_API || MCA)
select FW_LOADER
---help---
This driver provides generic support for token ring adapters
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 1d3231c..ec3f75a 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -270,7 +270,7 @@
config AIRO_CS
tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
- depends on NET_RADIO && PCMCIA
+ depends on NET_RADIO && PCMCIA && (BROKEN || !M32R)
---help---
This is the standard Linux driver to support Cisco/Aironet PCMCIA
802.11 wireless cards. This driver is the same as the Aironet
diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig
index 16a2e6a..725a141 100644
--- a/drivers/parport/Kconfig
+++ b/drivers/parport/Kconfig
@@ -34,7 +34,7 @@
config PARPORT_PC
tristate "PC-style hardware"
- depends on PARPORT && (!SPARC64 || PCI) && !SPARC32
+ depends on PARPORT && (!SPARC64 || PCI) && !SPARC32 && !M32R
---help---
You should say Y here if you have a PC-style parallel port. All
IBM PC compatible computers and some Alphas have PC-style
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index 6f9fdb2..599b116 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -41,6 +41,7 @@
#ifdef CONFIG_PCMCIA_PROBE
+#include <asm/irq.h>
/* mask of IRQs already reserved by other cards, we should avoid using them */
static u8 pcmcia_used_irq[NR_IRQS];
#endif
diff --git a/drivers/s390/cio/qdio.c b/drivers/s390/cio/qdio.c
index d36258d..533f90c 100644
--- a/drivers/s390/cio/qdio.c
+++ b/drivers/s390/cio/qdio.c
@@ -230,7 +230,7 @@
}
/* locked by the locks in qdio_activate and qdio_cleanup */
-static __u32 * volatile
+static __u32 volatile *
qdio_get_indicator(void)
{
int i;
diff --git a/drivers/s390/crypto/z90crypt.h b/drivers/s390/crypto/z90crypt.h
index 82a1d97..0a3bb5a 100644
--- a/drivers/s390/crypto/z90crypt.h
+++ b/drivers/s390/crypto/z90crypt.h
@@ -36,15 +36,6 @@
#define z90crypt_VARIANT 2 // 2 = added PCIXCC MCL3 and CEX2C support
/**
- * If we are not using the sparse checker, __user has no use.
- */
-#ifdef __CHECKER__
-# define __user __attribute__((noderef, address_space(1)))
-#else
-# define __user
-#endif
-
-/**
* struct ica_rsa_modexpo
*
* Requirements:
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index f1e8c42..12c208f 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1696,7 +1696,7 @@
config MAC_SCSI
bool "Macintosh NCR5380 SCSI"
- depends on MAC && SCSI
+ depends on MAC && SCSI=y
help
This is the NCR 5380 SCSI controller included on most of the 68030
based Macintoshes. If you have one of these say Y and read the
@@ -1717,7 +1717,7 @@
config MVME147_SCSI
bool "WD33C93 SCSI driver for MVME147"
- depends on MVME147 && SCSI
+ depends on MVME147 && SCSI=y
help
Support for the on-board SCSI controller on the Motorola MVME147
single-board computer.
@@ -1758,7 +1758,7 @@
config SUN3X_ESP
bool "Sun3x ESP SCSI"
- depends on SUN3X && SCSI
+ depends on SUN3X && SCSI=y
help
The ESP was an on-board SCSI controller used on Sun 3/80
machines. Say Y here to compile in support for it.
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index c562369..e3b9692 100644
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -1105,6 +1105,7 @@
MODULE_DESCRIPTION("AHCI SATA low-level driver");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, ahci_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
module_init(ahci_init);
module_exit(ahci_exit);
diff --git a/drivers/scsi/arm/Kconfig b/drivers/scsi/arm/Kconfig
index 54b3286..13f2304 100644
--- a/drivers/scsi/arm/Kconfig
+++ b/drivers/scsi/arm/Kconfig
@@ -3,7 +3,7 @@
#
config SCSI_ACORNSCSI_3
tristate "Acorn SCSI card (aka30) support"
- depends on ARCH_ACORN && SCSI
+ depends on ARCH_ACORN && SCSI && BROKEN
help
This enables support for the Acorn SCSI card (aka30). If you have an
Acorn system with one of these, say Y. If unsure, say N.
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index a2cfade..d96ebf9 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -32,7 +32,7 @@
#include <linux/libata.h>
#define DRV_NAME "ata_piix"
-#define DRV_VERSION "1.03"
+#define DRV_VERSION "1.04"
enum {
PIIX_IOCFG = 0x54, /* IDE I/O configuration register */
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 73b1f72..f4e7dcb 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -2268,19 +2268,6 @@
* spin_lock_irqsave(host_set lock)
*/
-
-
-/**
- * ata_sg_init_one - Prepare a one-entry scatter-gather list.
- * @qc: Queued command
- * @buf: transfer buffer
- * @buflen: length of buf
- *
- * Builds a single-entry scatter-gather list to initiate a
- * transfer utilizing the specified buffer.
- *
- * LOCKING:
- */
void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen)
{
struct scatterlist *sg;
@@ -2312,18 +2299,6 @@
* spin_lock_irqsave(host_set lock)
*/
-
-/**
- * ata_sg_init - Assign a scatter gather list to a queued command
- * @qc: Queued command
- * @sg: Scatter-gather list
- * @n_elem: length of sg list
- *
- * Attaches a scatter-gather list to a queued command.
- *
- * LOCKING:
- */
-
void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
unsigned int n_elem)
{
diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h
index d90430b..3e7f484 100644
--- a/drivers/scsi/libata.h
+++ b/drivers/scsi/libata.h
@@ -26,7 +26,7 @@
#define __LIBATA_H__
#define DRV_NAME "libata"
-#define DRV_VERSION "1.11" /* must be exactly four chars */
+#define DRV_VERSION "1.12" /* must be exactly four chars */
struct ata_scsi_args {
u16 *id;
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
index 5c1d441..919fb31 100644
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -40,7 +40,7 @@
#include "sata_promise.h"
#define DRV_NAME "sata_promise"
-#define DRV_VERSION "1.01"
+#define DRV_VERSION "1.02"
enum {
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 97034d3..d579761 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -211,7 +211,7 @@
config SERIAL_AMBA_PL010
tristate "ARM AMBA PL010 serial port support"
- depends on ARM_AMBA
+ depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
select SERIAL_CORE
help
This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
@@ -819,7 +819,7 @@
config SERIAL_M32R_PLDSIO
bool "M32R SIO I/F on a PLD"
- depends on SERIAL_M32R_SIO=y
+ depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PALT_USRV || PLAT_M32700UT)
default n
help
Say Y here if you want to use the M32R serial controller
diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
index 0301fea..9b50560 100644
--- a/drivers/serial/m32r_sio.c
+++ b/drivers/serial/m32r_sio.c
@@ -1123,7 +1123,7 @@
return uart_set_options(port, co, baud, parity, bits, flow);
}
-extern struct uart_driver m32r_sio_reg;
+static struct uart_driver m32r_sio_reg;
static struct console m32r_sio_console = {
.name = "ttyS",
.write = m32r_sio_console_write,
diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c
index 576f3b8..4528a00 100644
--- a/drivers/usb/net/usbnet.c
+++ b/drivers/usb/net/usbnet.c
@@ -1922,7 +1922,7 @@
// copy the packet data to the new skb
memcpy(skb_put(gl_skb, size), packet->packet_data, size);
- skb_return (dev, skb);
+ skb_return (dev, gl_skb);
}
// advance to the next packet
diff --git a/drivers/usb/net/zd1201.c b/drivers/usb/net/zd1201.c
index 29cd801..e32a80b 100644
--- a/drivers/usb/net/zd1201.c
+++ b/drivers/usb/net/zd1201.c
@@ -346,8 +346,7 @@
if (datalen<14)
goto resubmit;
if ((seq & IEEE802_11_SCTL_FRAG) == 0) {
- frag = kmalloc(sizeof(struct zd1201_frag*),
- GFP_ATOMIC);
+ frag = kmalloc(sizeof(*frag), GFP_ATOMIC);
if (!frag)
goto resubmit;
skb = dev_alloc_skb(IEEE802_11_DATA_LEN +14+2);
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index cbff983..5fe182d 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -6,7 +6,7 @@
config VGA_CONSOLE
bool "VGA text console" if EMBEDDED || !X86
- depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC32 && !SPARC64 && !M68K && !PARISC
+ depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC32 && !SPARC64 && !M68K && !PARISC && !ARCH_VERSATILE
default y
help
Saying Y here will allow you to use Linux in text mode through a