| /* | 
 |  * This file is part of wl1271 | 
 |  * | 
 |  * Copyright (C) 2008-2009 Nokia Corporation | 
 |  * | 
 |  * Contact: Luciano Coelho <luciano.coelho@nokia.com> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License | 
 |  * version 2 as published by the Free Software Foundation. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, but | 
 |  * WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
 |  * General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | 
 |  * 02110-1301 USA | 
 |  * | 
 |  */ | 
 |  | 
 | #include "wl12xx.h" | 
 | #include "reg.h" | 
 | #include "io.h" | 
 | #include "event.h" | 
 | #include "ps.h" | 
 | #include "scan.h" | 
 | #include "wl12xx_80211.h" | 
 |  | 
 | void wl1271_pspoll_work(struct work_struct *work) | 
 | { | 
 | 	struct delayed_work *dwork; | 
 | 	struct wl1271 *wl; | 
 | 	int ret; | 
 |  | 
 | 	dwork = container_of(work, struct delayed_work, work); | 
 | 	wl = container_of(dwork, struct wl1271, pspoll_work); | 
 |  | 
 | 	wl1271_debug(DEBUG_EVENT, "pspoll work"); | 
 |  | 
 | 	mutex_lock(&wl->mutex); | 
 |  | 
 | 	if (unlikely(wl->state == WL1271_STATE_OFF)) | 
 | 		goto out; | 
 |  | 
 | 	if (!test_and_clear_bit(WL1271_FLAG_PSPOLL_FAILURE, &wl->flags)) | 
 | 		goto out; | 
 |  | 
 | 	if (!test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) | 
 | 		goto out; | 
 |  | 
 | 	/* | 
 | 	 * if we end up here, then we were in powersave when the pspoll | 
 | 	 * delivery failure occurred, and no-one changed state since, so | 
 | 	 * we should go back to powersave. | 
 | 	 */ | 
 | 	ret = wl1271_ps_elp_wakeup(wl); | 
 | 	if (ret < 0) | 
 | 		goto out; | 
 |  | 
 | 	wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE, wl->basic_rate, true); | 
 |  | 
 | 	wl1271_ps_elp_sleep(wl); | 
 | out: | 
 | 	mutex_unlock(&wl->mutex); | 
 | }; | 
 |  | 
 | static void wl1271_event_pspoll_delivery_fail(struct wl1271 *wl) | 
 | { | 
 | 	int delay = wl->conf.conn.ps_poll_recovery_period; | 
 | 	int ret; | 
 |  | 
 | 	wl->ps_poll_failures++; | 
 | 	if (wl->ps_poll_failures == 1) | 
 | 		wl1271_info("AP with dysfunctional ps-poll, " | 
 | 			    "trying to work around it."); | 
 |  | 
 | 	/* force active mode receive data from the AP */ | 
 | 	if (test_bit(WL1271_FLAG_PSM, &wl->flags)) { | 
 | 		ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE, | 
 | 					 wl->basic_rate, true); | 
 | 		if (ret < 0) | 
 | 			return; | 
 | 		set_bit(WL1271_FLAG_PSPOLL_FAILURE, &wl->flags); | 
 | 		ieee80211_queue_delayed_work(wl->hw, &wl->pspoll_work, | 
 | 					     msecs_to_jiffies(delay)); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * If already in active mode, lets we should be getting data from | 
 | 	 * the AP right away. If we enter PSM too fast after this, and data | 
 | 	 * remains on the AP, we will get another event like this, and we'll | 
 | 	 * go into active once more. | 
 | 	 */ | 
 | } | 
 |  | 
 | static int wl1271_event_ps_report(struct wl1271 *wl, | 
 | 				  struct event_mailbox *mbox, | 
 | 				  bool *beacon_loss) | 
 | { | 
 | 	int ret = 0; | 
 | 	u32 total_retries = wl->conf.conn.psm_entry_retries; | 
 |  | 
 | 	wl1271_debug(DEBUG_EVENT, "ps_status: 0x%x", mbox->ps_status); | 
 |  | 
 | 	switch (mbox->ps_status) { | 
 | 	case EVENT_ENTER_POWER_SAVE_FAIL: | 
 | 		wl1271_debug(DEBUG_PSM, "PSM entry failed"); | 
 |  | 
 | 		if (!test_bit(WL1271_FLAG_PSM, &wl->flags)) { | 
 | 			/* remain in active mode */ | 
 | 			wl->psm_entry_retry = 0; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		if (wl->psm_entry_retry < total_retries) { | 
 | 			wl->psm_entry_retry++; | 
 | 			ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE, | 
 | 						 wl->basic_rate, true); | 
 | 		} else { | 
 | 			wl1271_info("No ack to nullfunc from AP."); | 
 | 			wl->psm_entry_retry = 0; | 
 | 			*beacon_loss = true; | 
 | 		} | 
 | 		break; | 
 | 	case EVENT_ENTER_POWER_SAVE_SUCCESS: | 
 | 		wl->psm_entry_retry = 0; | 
 |  | 
 | 		/* enable beacon filtering */ | 
 | 		ret = wl1271_acx_beacon_filter_opt(wl, true); | 
 | 		if (ret < 0) | 
 | 			break; | 
 |  | 
 | 		/* | 
 | 		 * BET has only a minor effect in 5GHz and masks | 
 | 		 * channel switch IEs, so we only enable BET on 2.4GHz | 
 | 		*/ | 
 | 		if (wl->band == IEEE80211_BAND_2GHZ) | 
 | 			/* enable beacon early termination */ | 
 | 			ret = wl1271_acx_bet_enable(wl, true); | 
 |  | 
 | 		if (wl->ps_compl) { | 
 | 			complete(wl->ps_compl); | 
 | 			wl->ps_compl = NULL; | 
 | 		} | 
 | 		break; | 
 | 	default: | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void wl1271_event_rssi_trigger(struct wl1271 *wl, | 
 | 				      struct event_mailbox *mbox) | 
 | { | 
 | 	enum nl80211_cqm_rssi_threshold_event event; | 
 | 	s8 metric = mbox->rssi_snr_trigger_metric[0]; | 
 |  | 
 | 	wl1271_debug(DEBUG_EVENT, "RSSI trigger metric: %d", metric); | 
 |  | 
 | 	if (metric <= wl->rssi_thold) | 
 | 		event = NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW; | 
 | 	else | 
 | 		event = NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH; | 
 |  | 
 | 	if (event != wl->last_rssi_event) | 
 | 		ieee80211_cqm_rssi_notify(wl->vif, event, GFP_KERNEL); | 
 | 	wl->last_rssi_event = event; | 
 | } | 
 |  | 
 | static void wl1271_stop_ba_event(struct wl1271 *wl, u8 ba_allowed) | 
 | { | 
 | 	/* Convert the value to bool */ | 
 | 	wl->ba_allowed = !!ba_allowed; | 
 |  | 
 | 	/* | 
 | 	 * Return in case: | 
 | 	 * there are not BA open or the event indication is to allowed BA | 
 | 	 */ | 
 | 	if ((!wl->ba_rx_bitmap) || (wl->ba_allowed)) | 
 | 		return; | 
 |  | 
 | 	ieee80211_stop_rx_ba_session(wl->vif, wl->ba_rx_bitmap, wl->bssid); | 
 | } | 
 |  | 
 | static void wl12xx_event_soft_gemini_sense(struct wl1271 *wl, | 
 | 					       u8 enable) | 
 | { | 
 | 	if (enable) { | 
 | 		/* disable dynamic PS when requested by the firmware */ | 
 | 		ieee80211_disable_dyn_ps(wl->vif); | 
 | 		set_bit(WL1271_FLAG_SOFT_GEMINI, &wl->flags); | 
 | 	} else { | 
 | 		ieee80211_enable_dyn_ps(wl->vif); | 
 | 		clear_bit(WL1271_FLAG_SOFT_GEMINI, &wl->flags); | 
 | 		wl1271_recalc_rx_streaming(wl); | 
 | 	} | 
 |  | 
 | } | 
 |  | 
 | static void wl1271_event_mbox_dump(struct event_mailbox *mbox) | 
 | { | 
 | 	wl1271_debug(DEBUG_EVENT, "MBOX DUMP:"); | 
 | 	wl1271_debug(DEBUG_EVENT, "\tvector: 0x%x", mbox->events_vector); | 
 | 	wl1271_debug(DEBUG_EVENT, "\tmask: 0x%x", mbox->events_mask); | 
 | } | 
 |  | 
 | static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox) | 
 | { | 
 | 	int ret; | 
 | 	u32 vector; | 
 | 	bool beacon_loss = false; | 
 | 	bool is_ap = (wl->bss_type == BSS_TYPE_AP_BSS); | 
 | 	bool disconnect_sta = false; | 
 | 	unsigned long sta_bitmap = 0; | 
 |  | 
 | 	wl1271_event_mbox_dump(mbox); | 
 |  | 
 | 	vector = le32_to_cpu(mbox->events_vector); | 
 | 	vector &= ~(le32_to_cpu(mbox->events_mask)); | 
 | 	wl1271_debug(DEBUG_EVENT, "vector: 0x%x", vector); | 
 |  | 
 | 	if (vector & SCAN_COMPLETE_EVENT_ID) { | 
 | 		wl1271_debug(DEBUG_EVENT, "status: 0x%x", | 
 | 			     mbox->scheduled_scan_status); | 
 |  | 
 | 		wl1271_scan_stm(wl); | 
 | 	} | 
 |  | 
 | 	if (vector & PERIODIC_SCAN_REPORT_EVENT_ID) { | 
 | 		wl1271_debug(DEBUG_EVENT, "PERIODIC_SCAN_REPORT_EVENT " | 
 | 			     "(status 0x%0x)", mbox->scheduled_scan_status); | 
 |  | 
 | 		wl1271_scan_sched_scan_results(wl); | 
 | 	} | 
 |  | 
 | 	if (vector & PERIODIC_SCAN_COMPLETE_EVENT_ID) { | 
 | 		wl1271_debug(DEBUG_EVENT, "PERIODIC_SCAN_COMPLETE_EVENT " | 
 | 			     "(status 0x%0x)", mbox->scheduled_scan_status); | 
 | 		if (wl->sched_scanning) { | 
 | 			wl1271_scan_sched_scan_stop(wl); | 
 | 			ieee80211_sched_scan_stopped(wl->hw); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (vector & SOFT_GEMINI_SENSE_EVENT_ID && | 
 | 	    wl->bss_type == BSS_TYPE_STA_BSS) | 
 | 		wl12xx_event_soft_gemini_sense(wl, | 
 | 					       mbox->soft_gemini_sense_info); | 
 |  | 
 | 	/* | 
 | 	 * The BSS_LOSE_EVENT_ID is only needed while psm (and hence beacon | 
 | 	 * filtering) is enabled. Without PSM, the stack will receive all | 
 | 	 * beacons and can detect beacon loss by itself. | 
 | 	 * | 
 | 	 * As there's possibility that the driver disables PSM before receiving | 
 | 	 * BSS_LOSE_EVENT, beacon loss has to be reported to the stack. | 
 | 	 * | 
 | 	 */ | 
 | 	if ((vector & BSS_LOSE_EVENT_ID) && !is_ap) { | 
 | 		wl1271_info("Beacon loss detected."); | 
 |  | 
 | 		/* indicate to the stack, that beacons have been lost */ | 
 | 		beacon_loss = true; | 
 | 	} | 
 |  | 
 | 	if ((vector & PS_REPORT_EVENT_ID) && !is_ap) { | 
 | 		wl1271_debug(DEBUG_EVENT, "PS_REPORT_EVENT"); | 
 | 		ret = wl1271_event_ps_report(wl, mbox, &beacon_loss); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	if ((vector & PSPOLL_DELIVERY_FAILURE_EVENT_ID) && !is_ap) | 
 | 		wl1271_event_pspoll_delivery_fail(wl); | 
 |  | 
 | 	if (vector & RSSI_SNR_TRIGGER_0_EVENT_ID) { | 
 | 		wl1271_debug(DEBUG_EVENT, "RSSI_SNR_TRIGGER_0_EVENT"); | 
 | 		if (wl->vif) | 
 | 			wl1271_event_rssi_trigger(wl, mbox); | 
 | 	} | 
 |  | 
 | 	if ((vector & BA_SESSION_RX_CONSTRAINT_EVENT_ID) && !is_ap) { | 
 | 		wl1271_debug(DEBUG_EVENT, "BA_SESSION_RX_CONSTRAINT_EVENT_ID. " | 
 | 			     "ba_allowed = 0x%x", mbox->ba_allowed); | 
 |  | 
 | 		if (wl->vif) | 
 | 			wl1271_stop_ba_event(wl, mbox->ba_allowed); | 
 | 	} | 
 |  | 
 | 	if ((vector & DUMMY_PACKET_EVENT_ID) && !is_ap) { | 
 | 		wl1271_debug(DEBUG_EVENT, "DUMMY_PACKET_ID_EVENT_ID"); | 
 | 		if (wl->vif) | 
 | 			wl1271_tx_dummy_packet(wl); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * "TX retries exceeded" has a different meaning according to mode. | 
 | 	 * In AP mode the offending station is disconnected. | 
 | 	 */ | 
 | 	if ((vector & MAX_TX_RETRY_EVENT_ID) && is_ap) { | 
 | 		wl1271_debug(DEBUG_EVENT, "MAX_TX_RETRY_EVENT_ID"); | 
 | 		sta_bitmap |= le16_to_cpu(mbox->sta_tx_retry_exceeded); | 
 | 		disconnect_sta = true; | 
 | 	} | 
 |  | 
 | 	if ((vector & INACTIVE_STA_EVENT_ID) && is_ap) { | 
 | 		wl1271_debug(DEBUG_EVENT, "INACTIVE_STA_EVENT_ID"); | 
 | 		sta_bitmap |= le16_to_cpu(mbox->sta_aging_status); | 
 | 		disconnect_sta = true; | 
 | 	} | 
 |  | 
 | 	if (is_ap && disconnect_sta) { | 
 | 		u32 num_packets = wl->conf.tx.max_tx_retries; | 
 | 		struct ieee80211_sta *sta; | 
 | 		const u8 *addr; | 
 | 		int h; | 
 |  | 
 | 		for (h = find_first_bit(&sta_bitmap, AP_MAX_LINKS); | 
 | 		     h < AP_MAX_LINKS; | 
 | 		     h = find_next_bit(&sta_bitmap, AP_MAX_LINKS, h+1)) { | 
 | 			if (!wl1271_is_active_sta(wl, h)) | 
 | 				continue; | 
 |  | 
 | 			addr = wl->links[h].addr; | 
 |  | 
 | 			rcu_read_lock(); | 
 | 			sta = ieee80211_find_sta(wl->vif, addr); | 
 | 			if (sta) { | 
 | 				wl1271_debug(DEBUG_EVENT, "remove sta %d", h); | 
 | 				ieee80211_report_low_ack(sta, num_packets); | 
 | 			} | 
 | 			rcu_read_unlock(); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (wl->vif && beacon_loss) | 
 | 		ieee80211_connection_loss(wl->vif); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int wl1271_event_unmask(struct wl1271 *wl) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	ret = wl1271_acx_event_mbox_mask(wl, ~(wl->event_mask)); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | void wl1271_event_mbox_config(struct wl1271 *wl) | 
 | { | 
 | 	wl->mbox_ptr[0] = wl1271_read32(wl, REG_EVENT_MAILBOX_PTR); | 
 | 	wl->mbox_ptr[1] = wl->mbox_ptr[0] + sizeof(struct event_mailbox); | 
 |  | 
 | 	wl1271_debug(DEBUG_EVENT, "MBOX ptrs: 0x%x 0x%x", | 
 | 		     wl->mbox_ptr[0], wl->mbox_ptr[1]); | 
 | } | 
 |  | 
 | int wl1271_event_handle(struct wl1271 *wl, u8 mbox_num) | 
 | { | 
 | 	struct event_mailbox mbox; | 
 | 	int ret; | 
 |  | 
 | 	wl1271_debug(DEBUG_EVENT, "EVENT on mbox %d", mbox_num); | 
 |  | 
 | 	if (mbox_num > 1) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* first we read the mbox descriptor */ | 
 | 	wl1271_read(wl, wl->mbox_ptr[mbox_num], &mbox, | 
 | 		    sizeof(struct event_mailbox), false); | 
 |  | 
 | 	/* process the descriptor */ | 
 | 	ret = wl1271_event_process(wl, &mbox); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	/* then we let the firmware know it can go on...*/ | 
 | 	wl1271_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_EVENT_ACK); | 
 |  | 
 | 	return 0; | 
 | } |