| /* | 
 |  *  Sysfs interface for the universal power supply monitor class | 
 |  * | 
 |  *  Copyright © 2007  David Woodhouse <dwmw2@infradead.org> | 
 |  *  Copyright © 2007  Anton Vorontsov <cbou@mail.ru> | 
 |  *  Copyright © 2004  Szabolcs Gyurko | 
 |  *  Copyright © 2003  Ian Molton <spyro@f2s.com> | 
 |  * | 
 |  *  Modified: 2004, Oct     Szabolcs Gyurko | 
 |  * | 
 |  *  You may use this code as per GPL version 2 | 
 |  */ | 
 |  | 
 | #include <linux/ctype.h> | 
 | #include <linux/power_supply.h> | 
 | #include <linux/slab.h> | 
 |  | 
 | #include "power_supply.h" | 
 |  | 
 | /* | 
 |  * This is because the name "current" breaks the device attr macro. | 
 |  * The "current" word resolves to "(get_current())" so instead of | 
 |  * "current" "(get_current())" appears in the sysfs. | 
 |  * | 
 |  * The source of this definition is the device.h which calls __ATTR | 
 |  * macro in sysfs.h which calls the __stringify macro. | 
 |  * | 
 |  * Only modification that the name is not tried to be resolved | 
 |  * (as a macro let's say). | 
 |  */ | 
 |  | 
 | #define POWER_SUPPLY_ATTR(_name)					\ | 
 | {									\ | 
 | 	.attr = { .name = #_name },					\ | 
 | 	.show = power_supply_show_property,				\ | 
 | 	.store = power_supply_store_property,				\ | 
 | } | 
 |  | 
 | static struct device_attribute power_supply_attrs[]; | 
 |  | 
 | static ssize_t power_supply_show_property(struct device *dev, | 
 | 					  struct device_attribute *attr, | 
 | 					  char *buf) { | 
 | 	static char *type_text[] = { | 
 | 		"Battery", "UPS", "Mains", "USB", | 
 | 		"USB_DCP", "USB_CDP", "USB_ACA" | 
 | 	}; | 
 | 	static char *status_text[] = { | 
 | 		"Unknown", "Charging", "Discharging", "Not charging", "Full" | 
 | 	}; | 
 | 	static char *charge_type[] = { | 
 | 		"Unknown", "N/A", "Trickle", "Fast" | 
 | 	}; | 
 | 	static char *health_text[] = { | 
 | 		"Unknown", "Good", "Overheat", "Dead", "Over voltage", | 
 | 		"Unspecified failure", "Cold", | 
 | 	}; | 
 | 	static char *technology_text[] = { | 
 | 		"Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe", "NiCd", | 
 | 		"LiMn" | 
 | 	}; | 
 | 	static char *capacity_level_text[] = { | 
 | 		"Unknown", "Critical", "Low", "Normal", "High", "Full" | 
 | 	}; | 
 | 	ssize_t ret = 0; | 
 | 	struct power_supply *psy = dev_get_drvdata(dev); | 
 | 	const ptrdiff_t off = attr - power_supply_attrs; | 
 | 	union power_supply_propval value; | 
 |  | 
 | 	if (off == POWER_SUPPLY_PROP_TYPE) | 
 | 		value.intval = psy->type; | 
 | 	else | 
 | 		ret = psy->get_property(psy, off, &value); | 
 |  | 
 | 	if (ret < 0) { | 
 | 		if (ret == -ENODATA) | 
 | 			dev_dbg(dev, "driver has no data for `%s' property\n", | 
 | 				attr->attr.name); | 
 | 		else if (ret != -ENODEV) | 
 | 			dev_err(dev, "driver failed to report `%s' property\n", | 
 | 				attr->attr.name); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	if (off == POWER_SUPPLY_PROP_STATUS) | 
 | 		return sprintf(buf, "%s\n", status_text[value.intval]); | 
 | 	else if (off == POWER_SUPPLY_PROP_CHARGE_TYPE) | 
 | 		return sprintf(buf, "%s\n", charge_type[value.intval]); | 
 | 	else if (off == POWER_SUPPLY_PROP_HEALTH) | 
 | 		return sprintf(buf, "%s\n", health_text[value.intval]); | 
 | 	else if (off == POWER_SUPPLY_PROP_TECHNOLOGY) | 
 | 		return sprintf(buf, "%s\n", technology_text[value.intval]); | 
 | 	else if (off == POWER_SUPPLY_PROP_CAPACITY_LEVEL) | 
 | 		return sprintf(buf, "%s\n", capacity_level_text[value.intval]); | 
 | 	else if (off == POWER_SUPPLY_PROP_TYPE) | 
 | 		return sprintf(buf, "%s\n", type_text[value.intval]); | 
 | 	else if (off >= POWER_SUPPLY_PROP_MODEL_NAME) | 
 | 		return sprintf(buf, "%s\n", value.strval); | 
 |  | 
 | 	return sprintf(buf, "%d\n", value.intval); | 
 | } | 
 |  | 
 | static ssize_t power_supply_store_property(struct device *dev, | 
 | 					   struct device_attribute *attr, | 
 | 					   const char *buf, size_t count) { | 
 | 	ssize_t ret; | 
 | 	struct power_supply *psy = dev_get_drvdata(dev); | 
 | 	const ptrdiff_t off = attr - power_supply_attrs; | 
 | 	union power_supply_propval value; | 
 | 	long long_val; | 
 |  | 
 | 	/* TODO: support other types than int */ | 
 | 	ret = strict_strtol(buf, 10, &long_val); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	value.intval = long_val; | 
 |  | 
 | 	ret = psy->set_property(psy, off, &value); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	return count; | 
 | } | 
 |  | 
 | /* Must be in the same order as POWER_SUPPLY_PROP_* */ | 
 | static struct device_attribute power_supply_attrs[] = { | 
 | 	/* Properties of type `int' */ | 
 | 	POWER_SUPPLY_ATTR(status), | 
 | 	POWER_SUPPLY_ATTR(charge_type), | 
 | 	POWER_SUPPLY_ATTR(health), | 
 | 	POWER_SUPPLY_ATTR(present), | 
 | 	POWER_SUPPLY_ATTR(online), | 
 | 	POWER_SUPPLY_ATTR(technology), | 
 | 	POWER_SUPPLY_ATTR(cycle_count), | 
 | 	POWER_SUPPLY_ATTR(voltage_max), | 
 | 	POWER_SUPPLY_ATTR(voltage_min), | 
 | 	POWER_SUPPLY_ATTR(voltage_max_design), | 
 | 	POWER_SUPPLY_ATTR(voltage_min_design), | 
 | 	POWER_SUPPLY_ATTR(voltage_now), | 
 | 	POWER_SUPPLY_ATTR(voltage_avg), | 
 | 	POWER_SUPPLY_ATTR(current_max), | 
 | 	POWER_SUPPLY_ATTR(current_now), | 
 | 	POWER_SUPPLY_ATTR(current_avg), | 
 | 	POWER_SUPPLY_ATTR(power_now), | 
 | 	POWER_SUPPLY_ATTR(power_avg), | 
 | 	POWER_SUPPLY_ATTR(charge_full_design), | 
 | 	POWER_SUPPLY_ATTR(charge_empty_design), | 
 | 	POWER_SUPPLY_ATTR(charge_full), | 
 | 	POWER_SUPPLY_ATTR(charge_empty), | 
 | 	POWER_SUPPLY_ATTR(charge_now), | 
 | 	POWER_SUPPLY_ATTR(charge_avg), | 
 | 	POWER_SUPPLY_ATTR(charge_counter), | 
 | 	POWER_SUPPLY_ATTR(energy_full_design), | 
 | 	POWER_SUPPLY_ATTR(energy_empty_design), | 
 | 	POWER_SUPPLY_ATTR(energy_full), | 
 | 	POWER_SUPPLY_ATTR(energy_empty), | 
 | 	POWER_SUPPLY_ATTR(energy_now), | 
 | 	POWER_SUPPLY_ATTR(energy_avg), | 
 | 	POWER_SUPPLY_ATTR(capacity), | 
 | 	POWER_SUPPLY_ATTR(capacity_level), | 
 | 	POWER_SUPPLY_ATTR(temp), | 
 | 	POWER_SUPPLY_ATTR(temp_ambient), | 
 | 	POWER_SUPPLY_ATTR(time_to_empty_now), | 
 | 	POWER_SUPPLY_ATTR(time_to_empty_avg), | 
 | 	POWER_SUPPLY_ATTR(time_to_full_now), | 
 | 	POWER_SUPPLY_ATTR(time_to_full_avg), | 
 | 	POWER_SUPPLY_ATTR(type), | 
 | 	/* Properties of type `const char *' */ | 
 | 	POWER_SUPPLY_ATTR(model_name), | 
 | 	POWER_SUPPLY_ATTR(manufacturer), | 
 | 	POWER_SUPPLY_ATTR(serial_number), | 
 | }; | 
 |  | 
 | static struct attribute * | 
 | __power_supply_attrs[ARRAY_SIZE(power_supply_attrs) + 1]; | 
 |  | 
 | static mode_t power_supply_attr_is_visible(struct kobject *kobj, | 
 | 					   struct attribute *attr, | 
 | 					   int attrno) | 
 | { | 
 | 	struct device *dev = container_of(kobj, struct device, kobj); | 
 | 	struct power_supply *psy = dev_get_drvdata(dev); | 
 | 	mode_t mode = S_IRUSR | S_IRGRP | S_IROTH; | 
 | 	int i; | 
 |  | 
 | 	if (attrno == POWER_SUPPLY_PROP_TYPE) | 
 | 		return mode; | 
 |  | 
 | 	for (i = 0; i < psy->num_properties; i++) { | 
 | 		int property = psy->properties[i]; | 
 |  | 
 | 		if (property == attrno) { | 
 | 			if (psy->property_is_writeable && | 
 | 			    psy->property_is_writeable(psy, property) > 0) | 
 | 				mode |= S_IWUSR; | 
 |  | 
 | 			return mode; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct attribute_group power_supply_attr_group = { | 
 | 	.attrs = __power_supply_attrs, | 
 | 	.is_visible = power_supply_attr_is_visible, | 
 | }; | 
 |  | 
 | static const struct attribute_group *power_supply_attr_groups[] = { | 
 | 	&power_supply_attr_group, | 
 | 	NULL, | 
 | }; | 
 |  | 
 | void power_supply_init_attrs(struct device_type *dev_type) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	dev_type->groups = power_supply_attr_groups; | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(power_supply_attrs); i++) | 
 | 		__power_supply_attrs[i] = &power_supply_attrs[i].attr; | 
 | } | 
 |  | 
 | static char *kstruprdup(const char *str, gfp_t gfp) | 
 | { | 
 | 	char *ret, *ustr; | 
 |  | 
 | 	ustr = ret = kmalloc(strlen(str) + 1, gfp); | 
 |  | 
 | 	if (!ret) | 
 | 		return NULL; | 
 |  | 
 | 	while (*str) | 
 | 		*ustr++ = toupper(*str++); | 
 |  | 
 | 	*ustr = 0; | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env) | 
 | { | 
 | 	struct power_supply *psy = dev_get_drvdata(dev); | 
 | 	int ret = 0, j; | 
 | 	char *prop_buf; | 
 | 	char *attrname; | 
 |  | 
 | 	dev_dbg(dev, "uevent\n"); | 
 |  | 
 | 	if (!psy || !psy->dev) { | 
 | 		dev_dbg(dev, "No power supply yet\n"); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	dev_dbg(dev, "POWER_SUPPLY_NAME=%s\n", psy->name); | 
 |  | 
 | 	ret = add_uevent_var(env, "POWER_SUPPLY_NAME=%s", psy->name); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	prop_buf = (char *)get_zeroed_page(GFP_KERNEL); | 
 | 	if (!prop_buf) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	for (j = 0; j < psy->num_properties; j++) { | 
 | 		struct device_attribute *attr; | 
 | 		char *line; | 
 |  | 
 | 		attr = &power_supply_attrs[psy->properties[j]]; | 
 |  | 
 | 		ret = power_supply_show_property(dev, attr, prop_buf); | 
 | 		if (ret == -ENODEV || ret == -ENODATA) { | 
 | 			/* When a battery is absent, we expect -ENODEV. Don't abort; | 
 | 			   send the uevent with at least the the PRESENT=0 property */ | 
 | 			ret = 0; | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		if (ret < 0) | 
 | 			goto out; | 
 |  | 
 | 		line = strchr(prop_buf, '\n'); | 
 | 		if (line) | 
 | 			*line = 0; | 
 |  | 
 | 		attrname = kstruprdup(attr->attr.name, GFP_KERNEL); | 
 | 		if (!attrname) { | 
 | 			ret = -ENOMEM; | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		dev_dbg(dev, "prop %s=%s\n", attrname, prop_buf); | 
 |  | 
 | 		ret = add_uevent_var(env, "POWER_SUPPLY_%s=%s", attrname, prop_buf); | 
 | 		kfree(attrname); | 
 | 		if (ret) | 
 | 			goto out; | 
 | 	} | 
 |  | 
 | out: | 
 | 	free_page((unsigned long)prop_buf); | 
 |  | 
 | 	return ret; | 
 | } |