drivers/regulator/max8925-regulator.c - android_kernel_htc_msm8960 - Gitiles

 /*
  * Regulators driver for Maxim max8925
  *
  * Copyright (C) 2009 Marvell International Ltd.
  *      Haojian Zhuang <haojian.zhuang@marvell.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
 #include <linux/mfd/max8925.h>

 #define SD1_DVM_VMIN		850000
 #define SD1_DVM_VMAX		1000000
 #define SD1_DVM_STEP		50000
 #define SD1_DVM_SHIFT		5		/* SDCTL1 bit5 */
 #define SD1_DVM_EN		6		/* SDV1 bit 6 */

 /* bit definitions in SD & LDO control registers */
 #define OUT_ENABLE   		0x1f		/* Power U/D sequence as I2C */
 #define OUT_DISABLE		0x1e		/* Power U/D sequence as I2C */

 struct max8925_regulator_info {
 	struct regulator_desc	desc;
 	struct regulator_dev	*regulator;
 	struct i2c_client	*i2c;
 	struct max8925_chip	*chip;

 	int	min_uV;
 	int	max_uV;
 	int	step_uV;
 	int	vol_reg;
 	int	vol_shift;
 	int	vol_nbits;
 	int	enable_bit;
 	int	enable_reg;
 };

 static inline int check_range(struct max8925_regulator_info *info,
 			      int min_uV, int max_uV)
 {
 	if (min_uV < info->min_uV || min_uV > info->max_uV)
 		return -EINVAL;

 	return 0;
 }

 static int max8925_list_voltage(struct regulator_dev *rdev, unsigned index)
 {
 	struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
 	return info->min_uV + index * info->step_uV;
 }

 static int max8925_set_voltage(struct regulator_dev *rdev,
 			       int min_uV, int max_uV, unsigned int *selector)
 {
 	struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
 	unsigned char data, mask;

 	if (check_range(info, min_uV, max_uV)) {
 		dev_err(info->chip->dev, "invalid voltage range (%d, %d) uV\n",
 			min_uV, max_uV);
 		return -EINVAL;
 	}
 	data = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV;
 	*selector = data;
 	data <<= info->vol_shift;
 	mask = ((1 << info->vol_nbits) - 1) << info->vol_shift;

 	return max8925_set_bits(info->i2c, info->vol_reg, mask, data);
 }

 static int max8925_get_voltage(struct regulator_dev *rdev)
 {
 	struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
 	unsigned char data, mask;
 	int ret;

 	ret = max8925_reg_read(info->i2c, info->vol_reg);
 	if (ret < 0)
 		return ret;
 	mask = ((1 << info->vol_nbits) - 1) << info->vol_shift;
 	data = (ret & mask) >> info->vol_shift;

 	return max8925_list_voltage(rdev, data);
 }

 static int max8925_enable(struct regulator_dev *rdev)
 {
 	struct max8925_regulator_info *info = rdev_get_drvdata(rdev);

 	return max8925_set_bits(info->i2c, info->enable_reg,
 				OUT_ENABLE << info->enable_bit,
 				OUT_ENABLE << info->enable_bit);
 }

 static int max8925_disable(struct regulator_dev *rdev)
 {
 	struct max8925_regulator_info *info = rdev_get_drvdata(rdev);

 	return max8925_set_bits(info->i2c, info->enable_reg,
 				OUT_ENABLE << info->enable_bit,
 				OUT_DISABLE << info->enable_bit);
 }

 static int max8925_is_enabled(struct regulator_dev *rdev)
 {
 	struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
 	int ret;

 	ret = max8925_reg_read(info->i2c, info->enable_reg);
 	if (ret < 0)
 		return ret;

 	return ret & (1 << info->enable_bit);
 }

 static int max8925_set_dvm_voltage(struct regulator_dev *rdev, int uV)
 {
 	struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
 	unsigned char data, mask;

 	if (uV < SD1_DVM_VMIN || uV > SD1_DVM_VMAX)
 		return -EINVAL;

 	data = (uV - SD1_DVM_VMIN + SD1_DVM_STEP - 1) / SD1_DVM_STEP;
 	data <<= SD1_DVM_SHIFT;
 	mask = 3 << SD1_DVM_SHIFT;

 	return max8925_set_bits(info->i2c, info->enable_reg, mask, data);
 }

 static int max8925_set_dvm_enable(struct regulator_dev *rdev)
 {
 	struct max8925_regulator_info *info = rdev_get_drvdata(rdev);

 	return max8925_set_bits(info->i2c, info->vol_reg, 1 << SD1_DVM_EN,
 				1 << SD1_DVM_EN);
 }

 static int max8925_set_dvm_disable(struct regulator_dev *rdev)
 {
 	struct max8925_regulator_info *info = rdev_get_drvdata(rdev);

 	return max8925_set_bits(info->i2c, info->vol_reg, 1 << SD1_DVM_EN, 0);
 }

 static struct regulator_ops max8925_regulator_sdv_ops = {
 	.set_voltage		= max8925_set_voltage,
 	.get_voltage		= max8925_get_voltage,
 	.enable			= max8925_enable,
 	.disable		= max8925_disable,
 	.is_enabled		= max8925_is_enabled,
 	.set_suspend_voltage	= max8925_set_dvm_voltage,
 	.set_suspend_enable	= max8925_set_dvm_enable,
 	.set_suspend_disable	= max8925_set_dvm_disable,
 };

 static struct regulator_ops max8925_regulator_ldo_ops = {
 	.set_voltage		= max8925_set_voltage,
 	.get_voltage		= max8925_get_voltage,
 	.enable			= max8925_enable,
 	.disable		= max8925_disable,
 	.is_enabled		= max8925_is_enabled,
 };

 #define MAX8925_SDV(_id, min, max, step)			\
 {								\
 	.desc	= {						\
 		.name	= "SDV" #_id,				\
 		.ops	= &max8925_regulator_sdv_ops,		\
 		.type	= REGULATOR_VOLTAGE,			\
 		.id	= MAX8925_ID_SD##_id,			\
 		.owner	= THIS_MODULE,				\
 	},							\
 	.min_uV		= min * 1000,				\
 	.max_uV		= max * 1000,				\
 	.step_uV	= step * 1000,				\
 	.vol_reg	= MAX8925_SDV##_id,			\
 	.vol_shift	= 0,					\
 	.vol_nbits	= 6,					\
 	.enable_reg	= MAX8925_SDCTL##_id,			\
 	.enable_bit	= 0,					\
 }

 #define MAX8925_LDO(_id, min, max, step)			\
 {								\
 	.desc	= {						\
 		.name	= "LDO" #_id,				\
 		.ops	= &max8925_regulator_ldo_ops,		\
 		.type	= REGULATOR_VOLTAGE,			\
 		.id	= MAX8925_ID_LDO##_id,			\
 		.owner	= THIS_MODULE,				\
 	},							\
 	.min_uV		= min * 1000,				\
 	.max_uV		= max * 1000,				\
 	.step_uV	= step * 1000,				\
 	.vol_reg	= MAX8925_LDOVOUT##_id,			\
 	.vol_shift	= 0,					\
 	.vol_nbits	= 6,					\
 	.enable_reg	= MAX8925_LDOCTL##_id,			\
 	.enable_bit	= 0,					\
 }

 static struct max8925_regulator_info max8925_regulator_info[] = {
 	MAX8925_SDV(1, 637.5, 1425, 12.5),
 	MAX8925_SDV(2,   650, 2225,   25),
 	MAX8925_SDV(3,   750, 3900,   50),

 	MAX8925_LDO(1,  750, 3900, 50),
 	MAX8925_LDO(2,  650, 2250, 25),
 	MAX8925_LDO(3,  650, 2250, 25),
 	MAX8925_LDO(4,  750, 3900, 50),
 	MAX8925_LDO(5,  750, 3900, 50),
 	MAX8925_LDO(6,  750, 3900, 50),
 	MAX8925_LDO(7,  750, 3900, 50),
 	MAX8925_LDO(8,  750, 3900, 50),
 	MAX8925_LDO(9,  750, 3900, 50),
 	MAX8925_LDO(10, 750, 3900, 50),
 	MAX8925_LDO(11, 750, 3900, 50),
 	MAX8925_LDO(12, 750, 3900, 50),
 	MAX8925_LDO(13, 750, 3900, 50),
 	MAX8925_LDO(14, 750, 3900, 50),
 	MAX8925_LDO(15, 750, 3900, 50),
 	MAX8925_LDO(16, 750, 3900, 50),
 	MAX8925_LDO(17, 650, 2250, 25),
 	MAX8925_LDO(18, 650, 2250, 25),
 	MAX8925_LDO(19, 750, 3900, 50),
 	MAX8925_LDO(20, 750, 3900, 50),
 };

 static struct max8925_regulator_info * __devinit find_regulator_info(int id)
 {
 	struct max8925_regulator_info *ri;
 	int i;

 	for (i = 0; i < ARRAY_SIZE(max8925_regulator_info); i++) {
 		ri = &max8925_regulator_info[i];
 		if (ri->desc.id == id)
 			return ri;
 	}
 	return NULL;
 }

 static int __devinit max8925_regulator_probe(struct platform_device *pdev)
 {
 	struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent);
 	struct max8925_platform_data *pdata = chip->dev->platform_data;
 	struct max8925_regulator_info *ri;
 	struct regulator_dev *rdev;

 	ri = find_regulator_info(pdev->id);
 	if (ri == NULL) {
 		dev_err(&pdev->dev, "invalid regulator ID specified\n");
 		return -EINVAL;
 	}
 	ri->i2c = chip->i2c;
 	ri->chip = chip;

 	rdev = regulator_register(&ri->desc, &pdev->dev,
 				  pdata->regulator[pdev->id], ri);
 	if (IS_ERR(rdev)) {
 		dev_err(&pdev->dev, "failed to register regulator %s\n",
 				ri->desc.name);
 		return PTR_ERR(rdev);
 	}

 	platform_set_drvdata(pdev, rdev);
 	return 0;
 }

 static int __devexit max8925_regulator_remove(struct platform_device *pdev)
 {
 	struct regulator_dev *rdev = platform_get_drvdata(pdev);

 	platform_set_drvdata(pdev, NULL);
 	regulator_unregister(rdev);

 	return 0;
 }

 static struct platform_driver max8925_regulator_driver = {
 	.driver		= {
 		.name	= "max8925-regulator",
 		.owner	= THIS_MODULE,
 	},
 	.probe		= max8925_regulator_probe,
 	.remove		= __devexit_p(max8925_regulator_remove),
 };

 static int __init max8925_regulator_init(void)
 {
 	return platform_driver_register(&max8925_regulator_driver);
 }
 subsys_initcall(max8925_regulator_init);

 static void __exit max8925_regulator_exit(void)
 {
 	platform_driver_unregister(&max8925_regulator_driver);
 }
 module_exit(max8925_regulator_exit);

 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
 MODULE_DESCRIPTION("Regulator Driver for Maxim 8925 PMIC");
 MODULE_ALIAS("platform:max8925-regulator");
	/*
	* Regulators driver for Maxim max8925
	*
	* Copyright (C) 2009 Marvell International Ltd.
	* Haojian Zhuang <haojian.zhuang@marvell.com>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*/
	#include <linux/kernel.h>
	#include <linux/init.h>
	#include <linux/err.h>
	#include <linux/i2c.h>
	#include <linux/platform_device.h>
	#include <linux/regulator/driver.h>
	#include <linux/regulator/machine.h>
	#include <linux/mfd/max8925.h>

	#define SD1_DVM_VMIN 850000
	#define SD1_DVM_VMAX 1000000
	#define SD1_DVM_STEP 50000
	#define SD1_DVM_SHIFT 5 /* SDCTL1 bit5 */
	#define SD1_DVM_EN 6 /* SDV1 bit 6 */

	/* bit definitions in SD & LDO control registers */
	#define OUT_ENABLE 0x1f /* Power U/D sequence as I2C */
	#define OUT_DISABLE 0x1e /* Power U/D sequence as I2C */

	struct max8925_regulator_info {
	struct regulator_desc desc;
	struct regulator_dev *regulator;
	struct i2c_client *i2c;
	struct max8925_chip *chip;

	int min_uV;
	int max_uV;
	int step_uV;
	int vol_reg;
	int vol_shift;
	int vol_nbits;
	int enable_bit;
	int enable_reg;
	};

	static inline int check_range(struct max8925_regulator_info *info,
	int min_uV, int max_uV)
	{
	if (min_uV < info->min_uV \|\| min_uV > info->max_uV)
	return -EINVAL;

	return 0;
	}

	static int max8925_list_voltage(struct regulator_dev *rdev, unsigned index)
	{
	struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
	return info->min_uV + index * info->step_uV;
	}

	static int max8925_set_voltage(struct regulator_dev *rdev,
	int min_uV, int max_uV, unsigned int *selector)
	{
	struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
	unsigned char data, mask;

	if (check_range(info, min_uV, max_uV)) {
	dev_err(info->chip->dev, "invalid voltage range (%d, %d) uV\n",
	min_uV, max_uV);
	return -EINVAL;
	}
	data = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV;
	*selector = data;
	data <<= info->vol_shift;
	mask = ((1 << info->vol_nbits) - 1) << info->vol_shift;

	return max8925_set_bits(info->i2c, info->vol_reg, mask, data);
	}

	static int max8925_get_voltage(struct regulator_dev *rdev)
	{
	struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
	unsigned char data, mask;
	int ret;

	ret = max8925_reg_read(info->i2c, info->vol_reg);
	if (ret < 0)
	return ret;
	mask = ((1 << info->vol_nbits) - 1) << info->vol_shift;
	data = (ret & mask) >> info->vol_shift;

	return max8925_list_voltage(rdev, data);
	}

	static int max8925_enable(struct regulator_dev *rdev)
	{
	struct max8925_regulator_info *info = rdev_get_drvdata(rdev);

	return max8925_set_bits(info->i2c, info->enable_reg,
	OUT_ENABLE << info->enable_bit,
	OUT_ENABLE << info->enable_bit);
	}

	static int max8925_disable(struct regulator_dev *rdev)
	{
	struct max8925_regulator_info *info = rdev_get_drvdata(rdev);

	return max8925_set_bits(info->i2c, info->enable_reg,
	OUT_ENABLE << info->enable_bit,
	OUT_DISABLE << info->enable_bit);
	}

	static int max8925_is_enabled(struct regulator_dev *rdev)
	{
	struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
	int ret;

	ret = max8925_reg_read(info->i2c, info->enable_reg);
	if (ret < 0)
	return ret;

	return ret & (1 << info->enable_bit);
	}

	static int max8925_set_dvm_voltage(struct regulator_dev *rdev, int uV)
	{
	struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
	unsigned char data, mask;

	if (uV < SD1_DVM_VMIN \|\| uV > SD1_DVM_VMAX)
	return -EINVAL;

	data = (uV - SD1_DVM_VMIN + SD1_DVM_STEP - 1) / SD1_DVM_STEP;
	data <<= SD1_DVM_SHIFT;
	mask = 3 << SD1_DVM_SHIFT;

	return max8925_set_bits(info->i2c, info->enable_reg, mask, data);
	}

	static int max8925_set_dvm_enable(struct regulator_dev *rdev)
	{
	struct max8925_regulator_info *info = rdev_get_drvdata(rdev);

	return max8925_set_bits(info->i2c, info->vol_reg, 1 << SD1_DVM_EN,
	1 << SD1_DVM_EN);
	}

	static int max8925_set_dvm_disable(struct regulator_dev *rdev)
	{
	struct max8925_regulator_info *info = rdev_get_drvdata(rdev);

	return max8925_set_bits(info->i2c, info->vol_reg, 1 << SD1_DVM_EN, 0);
	}

	static struct regulator_ops max8925_regulator_sdv_ops = {
	.set_voltage = max8925_set_voltage,
	.get_voltage = max8925_get_voltage,
	.enable = max8925_enable,
	.disable = max8925_disable,
	.is_enabled = max8925_is_enabled,
	.set_suspend_voltage = max8925_set_dvm_voltage,
	.set_suspend_enable = max8925_set_dvm_enable,
	.set_suspend_disable = max8925_set_dvm_disable,
	};

	static struct regulator_ops max8925_regulator_ldo_ops = {
	.set_voltage = max8925_set_voltage,
	.get_voltage = max8925_get_voltage,
	.enable = max8925_enable,
	.disable = max8925_disable,
	.is_enabled = max8925_is_enabled,
	};

	#define MAX8925_SDV(_id, min, max, step) \
	{ \
	.desc = { \
	.name = "SDV" #_id, \
	.ops = &max8925_regulator_sdv_ops, \
	.type = REGULATOR_VOLTAGE, \
	.id = MAX8925_ID_SD##_id, \
	.owner = THIS_MODULE, \
	}, \
	.min_uV = min * 1000, \
	.max_uV = max * 1000, \
	.step_uV = step * 1000, \
	.vol_reg = MAX8925_SDV##_id, \
	.vol_shift = 0, \
	.vol_nbits = 6, \
	.enable_reg = MAX8925_SDCTL##_id, \
	.enable_bit = 0, \
	}

	#define MAX8925_LDO(_id, min, max, step) \
	{ \
	.desc = { \
	.name = "LDO" #_id, \
	.ops = &max8925_regulator_ldo_ops, \
	.type = REGULATOR_VOLTAGE, \
	.id = MAX8925_ID_LDO##_id, \
	.owner = THIS_MODULE, \
	}, \
	.min_uV = min * 1000, \
	.max_uV = max * 1000, \
	.step_uV = step * 1000, \
	.vol_reg = MAX8925_LDOVOUT##_id, \
	.vol_shift = 0, \
	.vol_nbits = 6, \
	.enable_reg = MAX8925_LDOCTL##_id, \
	.enable_bit = 0, \
	}

	static struct max8925_regulator_info max8925_regulator_info[] = {
	MAX8925_SDV(1, 637.5, 1425, 12.5),
	MAX8925_SDV(2, 650, 2225, 25),
	MAX8925_SDV(3, 750, 3900, 50),

	MAX8925_LDO(1, 750, 3900, 50),
	MAX8925_LDO(2, 650, 2250, 25),
	MAX8925_LDO(3, 650, 2250, 25),
	MAX8925_LDO(4, 750, 3900, 50),
	MAX8925_LDO(5, 750, 3900, 50),
	MAX8925_LDO(6, 750, 3900, 50),
	MAX8925_LDO(7, 750, 3900, 50),
	MAX8925_LDO(8, 750, 3900, 50),
	MAX8925_LDO(9, 750, 3900, 50),
	MAX8925_LDO(10, 750, 3900, 50),
	MAX8925_LDO(11, 750, 3900, 50),
	MAX8925_LDO(12, 750, 3900, 50),
	MAX8925_LDO(13, 750, 3900, 50),
	MAX8925_LDO(14, 750, 3900, 50),
	MAX8925_LDO(15, 750, 3900, 50),
	MAX8925_LDO(16, 750, 3900, 50),
	MAX8925_LDO(17, 650, 2250, 25),
	MAX8925_LDO(18, 650, 2250, 25),
	MAX8925_LDO(19, 750, 3900, 50),
	MAX8925_LDO(20, 750, 3900, 50),
	};

	static struct max8925_regulator_info * __devinit find_regulator_info(int id)
	{
	struct max8925_regulator_info *ri;
	int i;

	for (i = 0; i < ARRAY_SIZE(max8925_regulator_info); i++) {
	ri = &max8925_regulator_info[i];
	if (ri->desc.id == id)
	return ri;
	}
	return NULL;
	}

	static int __devinit max8925_regulator_probe(struct platform_device *pdev)
	{
	struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent);
	struct max8925_platform_data *pdata = chip->dev->platform_data;
	struct max8925_regulator_info *ri;
	struct regulator_dev *rdev;

	ri = find_regulator_info(pdev->id);
	if (ri == NULL) {
	dev_err(&pdev->dev, "invalid regulator ID specified\n");
	return -EINVAL;
	}
	ri->i2c = chip->i2c;
	ri->chip = chip;

	rdev = regulator_register(&ri->desc, &pdev->dev,
	pdata->regulator[pdev->id], ri);
	if (IS_ERR(rdev)) {
	dev_err(&pdev->dev, "failed to register regulator %s\n",
	ri->desc.name);
	return PTR_ERR(rdev);
	}

	platform_set_drvdata(pdev, rdev);
	return 0;
	}

	static int __devexit max8925_regulator_remove(struct platform_device *pdev)
	{
	struct regulator_dev *rdev = platform_get_drvdata(pdev);

	platform_set_drvdata(pdev, NULL);
	regulator_unregister(rdev);

	return 0;
	}

	static struct platform_driver max8925_regulator_driver = {
	.driver = {
	.name = "max8925-regulator",
	.owner = THIS_MODULE,
	},
	.probe = max8925_regulator_probe,
	.remove = __devexit_p(max8925_regulator_remove),
	};

	static int __init max8925_regulator_init(void)
	{
	return platform_driver_register(&max8925_regulator_driver);
	}
	subsys_initcall(max8925_regulator_init);

	static void __exit max8925_regulator_exit(void)
	{
	platform_driver_unregister(&max8925_regulator_driver);
	}
	module_exit(max8925_regulator_exit);

	MODULE_LICENSE("GPL");
	MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
	MODULE_DESCRIPTION("Regulator Driver for Maxim 8925 PMIC");
	MODULE_ALIAS("platform:max8925-regulator");