b43legacy: Convert to use of the new SPROM structure
The b43legacy driver is modified to use the new SPROM structure.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index e545f79..1a8b676 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -1745,7 +1745,7 @@
mask |= 0x0060;
set |= 0x0060;
}
- if (dev->dev->bus->sprom.r1.boardflags_lo & B43legacy_BFL_PACTRL) {
+ if (dev->dev->bus->sprom.boardflags_lo & B43legacy_BFL_PACTRL) {
b43legacy_write16(dev, B43legacy_MMIO_GPIO_MASK,
b43legacy_read16(dev,
B43legacy_MMIO_GPIO_MASK)
@@ -2122,7 +2122,7 @@
static void b43legacy_periodic_every60sec(struct b43legacy_wldev *dev)
{
b43legacy_phy_lo_mark_all_unused(dev);
- if (dev->dev->bus->sprom.r1.boardflags_lo & B43legacy_BFL_RSSI) {
+ if (dev->dev->bus->sprom.boardflags_lo & B43legacy_BFL_RSSI) {
b43legacy_mac_suspend(dev);
b43legacy_calc_nrssi_slope(dev);
b43legacy_mac_enable(dev);
@@ -3064,7 +3064,7 @@
hf |= B43legacy_HF_SYMW;
if (phy->rev == 1)
hf |= B43legacy_HF_GDCW;
- if (sprom->r1.boardflags_lo & B43legacy_BFL_PACTRL)
+ if (sprom->boardflags_lo & B43legacy_BFL_PACTRL)
hf |= B43legacy_HF_OFDMPABOOST;
} else if (phy->type == B43legacy_PHYTYPE_B) {
hf |= B43legacy_HF_SYMW;
@@ -3556,12 +3556,12 @@
if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE &&
bus->boardinfo.type == 0x4E &&
bus->boardinfo.rev > 0x40)
- bus->sprom.r1.boardflags_lo |= B43legacy_BFL_PACTRL;
+ bus->sprom.boardflags_lo |= B43legacy_BFL_PACTRL;
/* Convert Antennagain values to Q5.2 */
- if (bus->sprom.r1.antenna_gain_bg == 0xFF)
- bus->sprom.r1.antenna_gain_bg = 2; /* if unset, use 2 dBm */
- bus->sprom.r1.antenna_gain_bg <<= 2;
+ if (bus->sprom.antenna_gain_bg == 0xFF)
+ bus->sprom.antenna_gain_bg = 2; /* if unset, use 2 dBm */
+ bus->sprom.antenna_gain_bg <<= 2;
}
static void b43legacy_wireless_exit(struct ssb_device *dev,
@@ -3596,10 +3596,10 @@
hw->max_noise = -110;
hw->queues = 1; /* FIXME: hardware has more queues */
SET_IEEE80211_DEV(hw, dev->dev);
- if (is_valid_ether_addr(sprom->r1.et1mac))
- SET_IEEE80211_PERM_ADDR(hw, sprom->r1.et1mac);
+ if (is_valid_ether_addr(sprom->et1mac))
+ SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac);
else
- SET_IEEE80211_PERM_ADDR(hw, sprom->r1.il0mac);
+ SET_IEEE80211_PERM_ADDR(hw, sprom->il0mac);
/* Get and initialize struct b43legacy_wl */
wl = hw_to_b43legacy_wl(hw);