OMAP: DSS2: Use MIPI DSI enums from include/video/mipi_display.h
MIPI DSI Transaction types and DCS commands are currently defined as
macros in dsi.c and panel-taal.c, remove these and replace them with
enum members defined in include/video/mipi_display.h.
Signed-off-by: Archit Taneja <archit@ti.com>
[tomi.valkeinen@ti.com: reformatted the commit message]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index 4e888ac..7675687 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -35,26 +35,12 @@
#include <video/omapdss.h>
#include <video/omap-panel-nokia-dsi.h>
+#include <video/mipi_display.h>
/* DSI Virtual channel. Hardcoded for now. */
#define TCH 0
#define DCS_READ_NUM_ERRORS 0x05
-#define DCS_READ_POWER_MODE 0x0a
-#define DCS_READ_MADCTL 0x0b
-#define DCS_READ_PIXEL_FORMAT 0x0c
-#define DCS_RDDSDR 0x0f
-#define DCS_SLEEP_IN 0x10
-#define DCS_SLEEP_OUT 0x11
-#define DCS_DISPLAY_OFF 0x28
-#define DCS_DISPLAY_ON 0x29
-#define DCS_COLUMN_ADDR 0x2a
-#define DCS_PAGE_ADDR 0x2b
-#define DCS_MEMORY_WRITE 0x2c
-#define DCS_TEAR_OFF 0x34
-#define DCS_TEAR_ON 0x35
-#define DCS_MEM_ACC_CTRL 0x36
-#define DCS_PIXEL_FORMAT 0x3a
#define DCS_BRIGHTNESS 0x51
#define DCS_CTRL_DISPLAY 0x53
#define DCS_WRITE_CABC 0x55
@@ -302,7 +288,7 @@
hw_guard_wait(td);
- cmd = DCS_SLEEP_IN;
+ cmd = MIPI_DCS_ENTER_SLEEP_MODE;
r = dsi_vc_dcs_write_nosync(td->dssdev, td->channel, &cmd, 1);
if (r)
return r;
@@ -321,7 +307,7 @@
hw_guard_wait(td);
- r = taal_dcs_write_0(td, DCS_SLEEP_OUT);
+ r = taal_dcs_write_0(td, MIPI_DCS_EXIT_SLEEP_MODE);
if (r)
return r;
@@ -356,7 +342,7 @@
u8 mode;
int b5, b6, b7;
- r = taal_dcs_read_1(td, DCS_READ_MADCTL, &mode);
+ r = taal_dcs_read_1(td, MIPI_DCS_GET_ADDRESS_MODE, &mode);
if (r)
return r;
@@ -390,7 +376,7 @@
mode &= ~((1<<7) | (1<<6) | (1<<5));
mode |= (b7 << 7) | (b6 << 6) | (b5 << 5);
- return taal_dcs_write_1(td, DCS_MEM_ACC_CTRL, mode);
+ return taal_dcs_write_1(td, MIPI_DCS_SET_ADDRESS_MODE, mode);
}
static int taal_set_update_window(struct taal_data *td,
@@ -403,7 +389,7 @@
u16 y2 = y + h - 1;
u8 buf[5];
- buf[0] = DCS_COLUMN_ADDR;
+ buf[0] = MIPI_DCS_SET_COLUMN_ADDRESS;
buf[1] = (x1 >> 8) & 0xff;
buf[2] = (x1 >> 0) & 0xff;
buf[3] = (x2 >> 8) & 0xff;
@@ -413,7 +399,7 @@
if (r)
return r;
- buf[0] = DCS_PAGE_ADDR;
+ buf[0] = MIPI_DCS_SET_PAGE_ADDRESS;
buf[1] = (y1 >> 8) & 0xff;
buf[2] = (y1 >> 0) & 0xff;
buf[3] = (y2 >> 8) & 0xff;
@@ -1195,7 +1181,8 @@
if (r)
goto err;
- r = taal_dcs_write_1(td, DCS_PIXEL_FORMAT, 0x7); /* 24bit/pixel */
+ r = taal_dcs_write_1(td, MIPI_DCS_SET_PIXEL_FORMAT,
+ MIPI_DCS_PIXEL_FMT_24BIT);
if (r)
goto err;
@@ -1209,7 +1196,7 @@
goto err;
}
- r = taal_dcs_write_0(td, DCS_DISPLAY_ON);
+ r = taal_dcs_write_0(td, MIPI_DCS_SET_DISPLAY_ON);
if (r)
goto err;
@@ -1246,7 +1233,7 @@
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
int r;
- r = taal_dcs_write_0(td, DCS_DISPLAY_OFF);
+ r = taal_dcs_write_0(td, MIPI_DCS_SET_DISPLAY_OFF);
if (!r)
r = taal_sleep_in(td);
@@ -1529,9 +1516,9 @@
int r;
if (enable)
- r = taal_dcs_write_1(td, DCS_TEAR_ON, 0);
+ r = taal_dcs_write_1(td, MIPI_DCS_SET_TEAR_ON, 0);
else
- r = taal_dcs_write_0(td, DCS_TEAR_OFF);
+ r = taal_dcs_write_0(td, MIPI_DCS_SET_TEAR_OFF);
if (!panel_data->use_ext_te)
omapdss_dsi_enable_te(dssdev, enable);
@@ -1851,7 +1838,7 @@
goto err;
}
- r = taal_dcs_read_1(td, DCS_RDDSDR, &state1);
+ r = taal_dcs_read_1(td, MIPI_DCS_GET_DIAGNOSTIC_RESULT, &state1);
if (r) {
dev_err(&dssdev->dev, "failed to read Taal status\n");
goto err;
@@ -1864,7 +1851,7 @@
goto err;
}
- r = taal_dcs_read_1(td, DCS_RDDSDR, &state2);
+ r = taal_dcs_read_1(td, MIPI_DCS_GET_DIAGNOSTIC_RESULT, &state2);
if (r) {
dev_err(&dssdev->dev, "failed to read Taal status\n");
goto err;
@@ -1880,7 +1867,7 @@
/* Self-diagnostics result is also shown on TE GPIO line. We need
* to re-enable TE after self diagnostics */
if (td->te_enabled && panel_data->use_ext_te) {
- r = taal_dcs_write_1(td, DCS_TEAR_ON, 0);
+ r = taal_dcs_write_1(td, MIPI_DCS_SET_TEAR_ON, 0);
if (r)
goto err;
}