|  | /* | 
|  | * Definitions for ADB (Apple Desktop Bus) support. | 
|  | */ | 
|  | #ifndef __ADB_H | 
|  | #define __ADB_H | 
|  |  | 
|  | /* ADB commands */ | 
|  | #define ADB_BUSRESET		0 | 
|  | #define ADB_FLUSH(id)		(0x01 | ((id) << 4)) | 
|  | #define ADB_WRITEREG(id, reg)	(0x08 | (reg) | ((id) << 4)) | 
|  | #define ADB_READREG(id, reg)	(0x0C | (reg) | ((id) << 4)) | 
|  |  | 
|  | /* ADB default device IDs (upper 4 bits of ADB command byte) */ | 
|  | #define ADB_DONGLE	1	/* "software execution control" devices */ | 
|  | #define ADB_KEYBOARD	2 | 
|  | #define ADB_MOUSE	3 | 
|  | #define ADB_TABLET	4 | 
|  | #define ADB_MODEM	5 | 
|  | #define ADB_MISC	7	/* maybe a monitor */ | 
|  |  | 
|  | #define ADB_RET_OK	0 | 
|  | #define ADB_RET_TIMEOUT	3 | 
|  |  | 
|  | /* The kind of ADB request. The controller may emulate some | 
|  | or all of those CUDA/PMU packet kinds */ | 
|  | #define ADB_PACKET	0 | 
|  | #define CUDA_PACKET	1 | 
|  | #define ERROR_PACKET	2 | 
|  | #define TIMER_PACKET	3 | 
|  | #define POWER_PACKET	4 | 
|  | #define MACIIC_PACKET	5 | 
|  | #define PMU_PACKET	6 | 
|  | #define ADB_QUERY	7 | 
|  |  | 
|  | /* ADB queries */ | 
|  |  | 
|  | /* ADB_QUERY_GETDEVINFO | 
|  | * Query ADB slot for device presence | 
|  | * data[2] = id, rep[0] = orig addr, rep[1] = handler_id | 
|  | */ | 
|  | #define ADB_QUERY_GETDEVINFO	1 | 
|  |  | 
|  | #ifdef __KERNEL__ | 
|  |  | 
|  | struct adb_request { | 
|  | unsigned char data[32]; | 
|  | int nbytes; | 
|  | unsigned char reply[32]; | 
|  | int reply_len; | 
|  | unsigned char reply_expected; | 
|  | unsigned char sent; | 
|  | unsigned char complete; | 
|  | void (*done)(struct adb_request *); | 
|  | void *arg; | 
|  | struct adb_request *next; | 
|  | }; | 
|  |  | 
|  | struct adb_ids { | 
|  | int nids; | 
|  | unsigned char id[16]; | 
|  | }; | 
|  |  | 
|  | /* Structure which encapsulates a low-level ADB driver */ | 
|  |  | 
|  | struct adb_driver { | 
|  | char name[16]; | 
|  | int (*probe)(void); | 
|  | int (*init)(void); | 
|  | int (*send_request)(struct adb_request *req, int sync); | 
|  | int (*autopoll)(int devs); | 
|  | void (*poll)(void); | 
|  | int (*reset_bus)(void); | 
|  | }; | 
|  |  | 
|  | /* Values for adb_request flags */ | 
|  | #define ADBREQ_REPLY	1	/* expect reply */ | 
|  | #define ADBREQ_SYNC	2	/* poll until done */ | 
|  | #define ADBREQ_NOSEND	4	/* build the request, but don't send it */ | 
|  |  | 
|  | /* Messages sent thru the client_list notifier. You should NOT stop | 
|  | the operation, at least not with this version */ | 
|  | enum adb_message { | 
|  | ADB_MSG_POWERDOWN,	/* Currently called before sleep only */ | 
|  | ADB_MSG_PRE_RESET,	/* Called before resetting the bus */ | 
|  | ADB_MSG_POST_RESET	/* Called after resetting the bus (re-do init & register) */ | 
|  | }; | 
|  | extern struct adb_driver *adb_controller; | 
|  | extern struct blocking_notifier_head adb_client_list; | 
|  |  | 
|  | int adb_request(struct adb_request *req, void (*done)(struct adb_request *), | 
|  | int flags, int nbytes, ...); | 
|  | int adb_register(int default_id,int handler_id,struct adb_ids *ids, | 
|  | void (*handler)(unsigned char *, int, int)); | 
|  | int adb_unregister(int index); | 
|  | void adb_poll(void); | 
|  | void adb_input(unsigned char *, int, int); | 
|  | int adb_reset_bus(void); | 
|  |  | 
|  | int adb_try_handler_change(int address, int new_id); | 
|  | int adb_get_infos(int address, int *original_address, int *handler_id); | 
|  |  | 
|  | #endif /* __KERNEL__ */ | 
|  |  | 
|  | #endif /* __ADB_H */ |