MN10300: Create general kernel debugger cache flushing
Create general kernel debugger cache flushing for MN10300 and get rid of the
old stuff that gdbstub was using.
Signed-off-by: David Howells <dhowells@redhat.com>
diff --git a/arch/mn10300/kernel/Makefile b/arch/mn10300/kernel/Makefile
index a06a2e1..48ab401 100644
--- a/arch/mn10300/kernel/Makefile
+++ b/arch/mn10300/kernel/Makefile
@@ -21,10 +21,6 @@
obj-$(CONFIG_GDBSTUB_ON_TTYSx) += gdb-io-serial.o gdb-io-serial-low.o
obj-$(CONFIG_GDBSTUB_ON_TTYSMx) += gdb-io-ttysm.o gdb-io-ttysm-low.o
-ifeq ($(CONFIG_MN10300_CACHE_ENABLED),y)
-obj-$(CONFIG_GDBSTUB) += gdb-cache.o
-endif
-
obj-$(CONFIG_MN10300_RTC) += rtc.o
obj-$(CONFIG_PROFILE) += profile.o profile-low.o
obj-$(CONFIG_MODULES) += module.o
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index f00b9ba..8e79a04 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -306,36 +306,7 @@
movbu d0,(GxICR(GDB_NMI_IPI))
movhu (GxICR(GDB_NMI_IPI)),d0
and ~EPSW_NMID,epsw # enable NMI
-#ifdef CONFIG_MN10300_CACHE_ENABLED
- mov (gdbstub_nmi_opr_type),d0
- cmp GDBSTUB_NMI_CACHE_PURGE,d0
- bne 4f # if not gdb cache purge, jump
- # gdb cache purge nmi ipi
- add -20,sp
- mov d1,(4,sp)
- mov a0,(8,sp)
- mov a1,(12,sp)
- mov mdr,d0
- mov d0,(16,sp)
- call gdbstub_local_purge_cache[],0
- mov 0x1,d0
- mov (CPUID),d1
- asl d1,d0
- mov gdbstub_nmi_cpumask,a0
- bclr d0,(a0)
- mov (4,sp),d1
- mov (8,sp),a0
- mov (12,sp),a1
- mov (16,sp),d0
- mov d0,mdr
- add 20,sp
- mov (sp),d0
- add 4,sp
- rti
-4:
-#endif /* CONFIG_MN10300_CACHE_ENABLED */
- # gdb wait nmi ipi
mov (sp),d0
SAVE_ALL
call gdbstub_nmi_wait[],0
diff --git a/arch/mn10300/kernel/gdb-cache.S b/arch/mn10300/kernel/gdb-cache.S
deleted file mode 100644
index 1108bad..0000000
--- a/arch/mn10300/kernel/gdb-cache.S
+++ /dev/null
@@ -1,105 +0,0 @@
-###############################################################################
-#
-# MN10300 Low-level cache purging routines for gdbstub
-#
-# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
-# Written by David Howells (dhowells@redhat.com)
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public Licence
-# as published by the Free Software Foundation; either version
-# 2 of the Licence, or (at your option) any later version.
-#
-###############################################################################
-#include <linux/sys.h>
-#include <linux/linkage.h>
-#include <asm/smp.h>
-#include <asm/cache.h>
-#include <asm/cpu-regs.h>
-#include <asm/exceptions.h>
-#include <asm/frame.inc>
-#include <asm/serial-regs.h>
-
- .text
-
-###############################################################################
-#
-# GDB stub cache purge
-#
-###############################################################################
- .type gdbstub_purge_cache,@function
-ENTRY(gdbstub_purge_cache)
- #######################################################################
- # read the addresses tagged in the cache's tag RAM and attempt to flush
- # those addresses specifically
- # - we rely on the hardware to filter out invalid tag entry addresses
- mov DCACHE_TAG(0,0),a0 # dcache tag RAM access address
- mov DCACHE_PURGE(0,0),a1 # dcache purge request address
- mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of entries
-
-mn10300_dcache_flush_loop:
- mov (a0),d0
- and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
- or L1_CACHE_TAG_VALID,d0 # retain valid entries in the
- # cache
- mov d0,(a1) # conditional purge
-
-mn10300_dcache_flush_skip:
- add L1_CACHE_BYTES,a0
- add L1_CACHE_BYTES,a1
- add -1,d1
- bne mn10300_dcache_flush_loop
-
-;; # unconditionally flush and invalidate the dcache
-;; mov DCACHE_PURGE(0,0),a1 # dcache purge request address
-;; mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of
-;; # entries
-;;
-;; gdbstub_purge_cache__dcache_loop:
-;; mov (a1),d0 # unconditional purge
-;;
-;; add L1_CACHE_BYTES,a1
-;; add -1,d1
-;; bne gdbstub_purge_cache__dcache_loop
-
- #######################################################################
- # now invalidate the icache
- mov CHCTR,a0
- movhu (a0),a1
-
- mov epsw,d1
- and ~EPSW_IE,epsw
- nop
- nop
-
- # disable the icache
- and ~CHCTR_ICEN,d0
- movhu d0,(a0)
-
- # and wait for it to calm down
- setlb
- movhu (a0),d0
- btst CHCTR_ICBUSY,d0
- lne
-
- # invalidate
- or CHCTR_ICINV,d0
- movhu d0,(a0)
-
- # wait for the cache to finish
- mov CHCTR,a0
- setlb
- movhu (a0),d0
- btst CHCTR_ICBUSY,d0
- lne
-
- # and reenable it
- movhu a1,(a0)
- movhu (a0),d0 # read back to flush
- # (SIGILLs all over without this)
-
- mov d1,epsw
-
- ret [],0
-
- .size gdbstub_purge_cache,.-gdbstub_purge_cache
diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c
index a9c1e91..1e8f24f 100644
--- a/arch/mn10300/kernel/gdb-stub.c
+++ b/arch/mn10300/kernel/gdb-stub.c
@@ -133,7 +133,7 @@
#include <asm/system.h>
#include <asm/gdb-stub.h>
#include <asm/exceptions.h>
-#include <asm/cacheflush.h>
+#include <asm/debugger.h>
#include <asm/serial-regs.h>
#include <asm/busctl-regs.h>
#include <unit/leds.h>
@@ -1665,7 +1665,7 @@
* NB: We flush both caches, just to be sure...
*/
if (gdbstub_flush_caches)
- gdbstub_purge_cache();
+ debugger_local_cache_flushinv();
gdbstub_load_fpu();
mn10300_set_gdbleds(0);