|  | /* | 
|  | * arch/arm/mach-at91/at91sam9260.c | 
|  | * | 
|  | *  Copyright (C) 2006 SAN People | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/pm.h> | 
|  |  | 
|  | #include <asm/irq.h> | 
|  | #include <asm/mach/arch.h> | 
|  | #include <asm/mach/map.h> | 
|  | #include <mach/cpu.h> | 
|  | #include <mach/at91sam9260.h> | 
|  | #include <mach/at91_pmc.h> | 
|  | #include <mach/at91_rstc.h> | 
|  | #include <mach/at91_shdwc.h> | 
|  |  | 
|  | #include "generic.h" | 
|  | #include "clock.h" | 
|  |  | 
|  | static struct map_desc at91sam9260_io_desc[] __initdata = { | 
|  | { | 
|  | .virtual	= AT91_VA_BASE_SYS, | 
|  | .pfn		= __phys_to_pfn(AT91_BASE_SYS), | 
|  | .length		= SZ_16K, | 
|  | .type		= MT_DEVICE, | 
|  | } | 
|  | }; | 
|  |  | 
|  | static struct map_desc at91sam9260_sram_desc[] __initdata = { | 
|  | { | 
|  | .virtual	= AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE, | 
|  | .pfn		= __phys_to_pfn(AT91SAM9260_SRAM0_BASE), | 
|  | .length		= AT91SAM9260_SRAM0_SIZE, | 
|  | .type		= MT_DEVICE, | 
|  | }, { | 
|  | .virtual	= AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE - AT91SAM9260_SRAM1_SIZE, | 
|  | .pfn		= __phys_to_pfn(AT91SAM9260_SRAM1_BASE), | 
|  | .length		= AT91SAM9260_SRAM1_SIZE, | 
|  | .type		= MT_DEVICE, | 
|  | } | 
|  | }; | 
|  |  | 
|  | static struct map_desc at91sam9g20_sram_desc[] __initdata = { | 
|  | { | 
|  | .virtual	= AT91_IO_VIRT_BASE - AT91SAM9G20_SRAM0_SIZE, | 
|  | .pfn		= __phys_to_pfn(AT91SAM9G20_SRAM0_BASE), | 
|  | .length		= AT91SAM9G20_SRAM0_SIZE, | 
|  | .type		= MT_DEVICE, | 
|  | }, { | 
|  | .virtual	= AT91_IO_VIRT_BASE - AT91SAM9G20_SRAM0_SIZE - AT91SAM9G20_SRAM1_SIZE, | 
|  | .pfn		= __phys_to_pfn(AT91SAM9G20_SRAM1_BASE), | 
|  | .length		= AT91SAM9G20_SRAM1_SIZE, | 
|  | .type		= MT_DEVICE, | 
|  | } | 
|  | }; | 
|  |  | 
|  | static struct map_desc at91sam9xe_sram_desc[] __initdata = { | 
|  | { | 
|  | .pfn		= __phys_to_pfn(AT91SAM9XE_SRAM_BASE), | 
|  | .type		= MT_DEVICE, | 
|  | } | 
|  | }; | 
|  |  | 
|  | /* -------------------------------------------------------------------- | 
|  | *  Clocks | 
|  | * -------------------------------------------------------------------- */ | 
|  |  | 
|  | /* | 
|  | * The peripheral clocks. | 
|  | */ | 
|  | static struct clk pioA_clk = { | 
|  | .name		= "pioA_clk", | 
|  | .pmc_mask	= 1 << AT91SAM9260_ID_PIOA, | 
|  | .type		= CLK_TYPE_PERIPHERAL, | 
|  | }; | 
|  | static struct clk pioB_clk = { | 
|  | .name		= "pioB_clk", | 
|  | .pmc_mask	= 1 << AT91SAM9260_ID_PIOB, | 
|  | .type		= CLK_TYPE_PERIPHERAL, | 
|  | }; | 
|  | static struct clk pioC_clk = { | 
|  | .name		= "pioC_clk", | 
|  | .pmc_mask	= 1 << AT91SAM9260_ID_PIOC, | 
|  | .type		= CLK_TYPE_PERIPHERAL, | 
|  | }; | 
|  | static struct clk adc_clk = { | 
|  | .name		= "adc_clk", | 
|  | .pmc_mask	= 1 << AT91SAM9260_ID_ADC, | 
|  | .type		= CLK_TYPE_PERIPHERAL, | 
|  | }; | 
|  | static struct clk usart0_clk = { | 
|  | .name		= "usart0_clk", | 
|  | .pmc_mask	= 1 << AT91SAM9260_ID_US0, | 
|  | .type		= CLK_TYPE_PERIPHERAL, | 
|  | }; | 
|  | static struct clk usart1_clk = { | 
|  | .name		= "usart1_clk", | 
|  | .pmc_mask	= 1 << AT91SAM9260_ID_US1, | 
|  | .type		= CLK_TYPE_PERIPHERAL, | 
|  | }; | 
|  | static struct clk usart2_clk = { | 
|  | .name		= "usart2_clk", | 
|  | .pmc_mask	= 1 << AT91SAM9260_ID_US2, | 
|  | .type		= CLK_TYPE_PERIPHERAL, | 
|  | }; | 
|  | static struct clk mmc_clk = { | 
|  | .name		= "mci_clk", | 
|  | .pmc_mask	= 1 << AT91SAM9260_ID_MCI, | 
|  | .type		= CLK_TYPE_PERIPHERAL, | 
|  | }; | 
|  | static struct clk udc_clk = { | 
|  | .name		= "udc_clk", | 
|  | .pmc_mask	= 1 << AT91SAM9260_ID_UDP, | 
|  | .type		= CLK_TYPE_PERIPHERAL, | 
|  | }; | 
|  | static struct clk twi_clk = { | 
|  | .name		= "twi_clk", | 
|  | .pmc_mask	= 1 << AT91SAM9260_ID_TWI, | 
|  | .type		= CLK_TYPE_PERIPHERAL, | 
|  | }; | 
|  | static struct clk spi0_clk = { | 
|  | .name		= "spi0_clk", | 
|  | .pmc_mask	= 1 << AT91SAM9260_ID_SPI0, | 
|  | .type		= CLK_TYPE_PERIPHERAL, | 
|  | }; | 
|  | static struct clk spi1_clk = { | 
|  | .name		= "spi1_clk", | 
|  | .pmc_mask	= 1 << AT91SAM9260_ID_SPI1, | 
|  | .type		= CLK_TYPE_PERIPHERAL, | 
|  | }; | 
|  | static struct clk ssc_clk = { | 
|  | .name		= "ssc_clk", | 
|  | .pmc_mask	= 1 << AT91SAM9260_ID_SSC, | 
|  | .type		= CLK_TYPE_PERIPHERAL, | 
|  | }; | 
|  | static struct clk tc0_clk = { | 
|  | .name		= "tc0_clk", | 
|  | .pmc_mask	= 1 << AT91SAM9260_ID_TC0, | 
|  | .type		= CLK_TYPE_PERIPHERAL, | 
|  | }; | 
|  | static struct clk tc1_clk = { | 
|  | .name		= "tc1_clk", | 
|  | .pmc_mask	= 1 << AT91SAM9260_ID_TC1, | 
|  | .type		= CLK_TYPE_PERIPHERAL, | 
|  | }; | 
|  | static struct clk tc2_clk = { | 
|  | .name		= "tc2_clk", | 
|  | .pmc_mask	= 1 << AT91SAM9260_ID_TC2, | 
|  | .type		= CLK_TYPE_PERIPHERAL, | 
|  | }; | 
|  | static struct clk ohci_clk = { | 
|  | .name		= "ohci_clk", | 
|  | .pmc_mask	= 1 << AT91SAM9260_ID_UHP, | 
|  | .type		= CLK_TYPE_PERIPHERAL, | 
|  | }; | 
|  | static struct clk macb_clk = { | 
|  | .name		= "macb_clk", | 
|  | .pmc_mask	= 1 << AT91SAM9260_ID_EMAC, | 
|  | .type		= CLK_TYPE_PERIPHERAL, | 
|  | }; | 
|  | static struct clk isi_clk = { | 
|  | .name		= "isi_clk", | 
|  | .pmc_mask	= 1 << AT91SAM9260_ID_ISI, | 
|  | .type		= CLK_TYPE_PERIPHERAL, | 
|  | }; | 
|  | static struct clk usart3_clk = { | 
|  | .name		= "usart3_clk", | 
|  | .pmc_mask	= 1 << AT91SAM9260_ID_US3, | 
|  | .type		= CLK_TYPE_PERIPHERAL, | 
|  | }; | 
|  | static struct clk usart4_clk = { | 
|  | .name		= "usart4_clk", | 
|  | .pmc_mask	= 1 << AT91SAM9260_ID_US4, | 
|  | .type		= CLK_TYPE_PERIPHERAL, | 
|  | }; | 
|  | static struct clk usart5_clk = { | 
|  | .name		= "usart5_clk", | 
|  | .pmc_mask	= 1 << AT91SAM9260_ID_US5, | 
|  | .type		= CLK_TYPE_PERIPHERAL, | 
|  | }; | 
|  | static struct clk tc3_clk = { | 
|  | .name		= "tc3_clk", | 
|  | .pmc_mask	= 1 << AT91SAM9260_ID_TC3, | 
|  | .type		= CLK_TYPE_PERIPHERAL, | 
|  | }; | 
|  | static struct clk tc4_clk = { | 
|  | .name		= "tc4_clk", | 
|  | .pmc_mask	= 1 << AT91SAM9260_ID_TC4, | 
|  | .type		= CLK_TYPE_PERIPHERAL, | 
|  | }; | 
|  | static struct clk tc5_clk = { | 
|  | .name		= "tc5_clk", | 
|  | .pmc_mask	= 1 << AT91SAM9260_ID_TC5, | 
|  | .type		= CLK_TYPE_PERIPHERAL, | 
|  | }; | 
|  |  | 
|  | static struct clk *periph_clocks[] __initdata = { | 
|  | &pioA_clk, | 
|  | &pioB_clk, | 
|  | &pioC_clk, | 
|  | &adc_clk, | 
|  | &usart0_clk, | 
|  | &usart1_clk, | 
|  | &usart2_clk, | 
|  | &mmc_clk, | 
|  | &udc_clk, | 
|  | &twi_clk, | 
|  | &spi0_clk, | 
|  | &spi1_clk, | 
|  | &ssc_clk, | 
|  | &tc0_clk, | 
|  | &tc1_clk, | 
|  | &tc2_clk, | 
|  | &ohci_clk, | 
|  | &macb_clk, | 
|  | &isi_clk, | 
|  | &usart3_clk, | 
|  | &usart4_clk, | 
|  | &usart5_clk, | 
|  | &tc3_clk, | 
|  | &tc4_clk, | 
|  | &tc5_clk, | 
|  | // irq0 .. irq2 | 
|  | }; | 
|  |  | 
|  | static struct clk_lookup periph_clocks_lookups[] = { | 
|  | CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), | 
|  | CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), | 
|  | CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), | 
|  | CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), | 
|  | CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), | 
|  | CLKDEV_CON_DEV_ID("t3_clk", "atmel_tcb.1", &tc3_clk), | 
|  | CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk), | 
|  | CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk), | 
|  | CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk), | 
|  | }; | 
|  |  | 
|  | static struct clk_lookup usart_clocks_lookups[] = { | 
|  | CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), | 
|  | CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), | 
|  | CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), | 
|  | CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), | 
|  | CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), | 
|  | CLKDEV_CON_DEV_ID("usart", "atmel_usart.5", &usart4_clk), | 
|  | CLKDEV_CON_DEV_ID("usart", "atmel_usart.6", &usart5_clk), | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * The two programmable clocks. | 
|  | * You must configure pin multiplexing to bring these signals out. | 
|  | */ | 
|  | static struct clk pck0 = { | 
|  | .name		= "pck0", | 
|  | .pmc_mask	= AT91_PMC_PCK0, | 
|  | .type		= CLK_TYPE_PROGRAMMABLE, | 
|  | .id		= 0, | 
|  | }; | 
|  | static struct clk pck1 = { | 
|  | .name		= "pck1", | 
|  | .pmc_mask	= AT91_PMC_PCK1, | 
|  | .type		= CLK_TYPE_PROGRAMMABLE, | 
|  | .id		= 1, | 
|  | }; | 
|  |  | 
|  | static void __init at91sam9260_register_clocks(void) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) | 
|  | clk_register(periph_clocks[i]); | 
|  |  | 
|  | clkdev_add_table(periph_clocks_lookups, | 
|  | ARRAY_SIZE(periph_clocks_lookups)); | 
|  | clkdev_add_table(usart_clocks_lookups, | 
|  | ARRAY_SIZE(usart_clocks_lookups)); | 
|  |  | 
|  | clk_register(&pck0); | 
|  | clk_register(&pck1); | 
|  | } | 
|  |  | 
|  | static struct clk_lookup console_clock_lookup; | 
|  |  | 
|  | void __init at91sam9260_set_console_clock(int id) | 
|  | { | 
|  | if (id >= ARRAY_SIZE(usart_clocks_lookups)) | 
|  | return; | 
|  |  | 
|  | console_clock_lookup.con_id = "usart"; | 
|  | console_clock_lookup.clk = usart_clocks_lookups[id].clk; | 
|  | clkdev_add(&console_clock_lookup); | 
|  | } | 
|  |  | 
|  | /* -------------------------------------------------------------------- | 
|  | *  GPIO | 
|  | * -------------------------------------------------------------------- */ | 
|  |  | 
|  | static struct at91_gpio_bank at91sam9260_gpio[] = { | 
|  | { | 
|  | .id		= AT91SAM9260_ID_PIOA, | 
|  | .offset		= AT91_PIOA, | 
|  | .clock		= &pioA_clk, | 
|  | }, { | 
|  | .id		= AT91SAM9260_ID_PIOB, | 
|  | .offset		= AT91_PIOB, | 
|  | .clock		= &pioB_clk, | 
|  | }, { | 
|  | .id		= AT91SAM9260_ID_PIOC, | 
|  | .offset		= AT91_PIOC, | 
|  | .clock		= &pioC_clk, | 
|  | } | 
|  | }; | 
|  |  | 
|  | static void at91sam9260_poweroff(void) | 
|  | { | 
|  | at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* -------------------------------------------------------------------- | 
|  | *  AT91SAM9260 processor initialization | 
|  | * -------------------------------------------------------------------- */ | 
|  |  | 
|  | static void __init at91sam9xe_map_io(void) | 
|  | { | 
|  | unsigned long cidr, sram_size; | 
|  |  | 
|  | cidr = at91_sys_read(AT91_DBGU_CIDR); | 
|  |  | 
|  | switch (cidr & AT91_CIDR_SRAMSIZ) { | 
|  | case AT91_CIDR_SRAMSIZ_32K: | 
|  | sram_size = 2 * SZ_16K; | 
|  | break; | 
|  | case AT91_CIDR_SRAMSIZ_16K: | 
|  | default: | 
|  | sram_size = SZ_16K; | 
|  | } | 
|  |  | 
|  | at91sam9xe_sram_desc->virtual = AT91_IO_VIRT_BASE - sram_size; | 
|  | at91sam9xe_sram_desc->length = sram_size; | 
|  |  | 
|  | iotable_init(at91sam9xe_sram_desc, ARRAY_SIZE(at91sam9xe_sram_desc)); | 
|  | } | 
|  |  | 
|  | void __init at91sam9260_map_io(void) | 
|  | { | 
|  | /* Map peripherals */ | 
|  | iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc)); | 
|  |  | 
|  | if (cpu_is_at91sam9xe()) | 
|  | at91sam9xe_map_io(); | 
|  | else if (cpu_is_at91sam9g20()) | 
|  | iotable_init(at91sam9g20_sram_desc, ARRAY_SIZE(at91sam9g20_sram_desc)); | 
|  | else | 
|  | iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc)); | 
|  | } | 
|  |  | 
|  | void __init at91sam9260_initialize(unsigned long main_clock) | 
|  | { | 
|  | at91_arch_reset = at91sam9_alt_reset; | 
|  | pm_power_off = at91sam9260_poweroff; | 
|  | at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1) | 
|  | | (1 << AT91SAM9260_ID_IRQ2); | 
|  |  | 
|  | /* Init clock subsystem */ | 
|  | at91_clock_init(main_clock); | 
|  |  | 
|  | /* Register the processor-specific clocks */ | 
|  | at91sam9260_register_clocks(); | 
|  |  | 
|  | /* Register GPIO subsystem */ | 
|  | at91_gpio_init(at91sam9260_gpio, 3); | 
|  | } | 
|  |  | 
|  | /* -------------------------------------------------------------------- | 
|  | *  Interrupt initialization | 
|  | * -------------------------------------------------------------------- */ | 
|  |  | 
|  | /* | 
|  | * The default interrupt priority levels (0 = lowest, 7 = highest). | 
|  | */ | 
|  | static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { | 
|  | 7,	/* Advanced Interrupt Controller */ | 
|  | 7,	/* System Peripherals */ | 
|  | 1,	/* Parallel IO Controller A */ | 
|  | 1,	/* Parallel IO Controller B */ | 
|  | 1,	/* Parallel IO Controller C */ | 
|  | 0,	/* Analog-to-Digital Converter */ | 
|  | 5,	/* USART 0 */ | 
|  | 5,	/* USART 1 */ | 
|  | 5,	/* USART 2 */ | 
|  | 0,	/* Multimedia Card Interface */ | 
|  | 2,	/* USB Device Port */ | 
|  | 6,	/* Two-Wire Interface */ | 
|  | 5,	/* Serial Peripheral Interface 0 */ | 
|  | 5,	/* Serial Peripheral Interface 1 */ | 
|  | 5,	/* Serial Synchronous Controller */ | 
|  | 0, | 
|  | 0, | 
|  | 0,	/* Timer Counter 0 */ | 
|  | 0,	/* Timer Counter 1 */ | 
|  | 0,	/* Timer Counter 2 */ | 
|  | 2,	/* USB Host port */ | 
|  | 3,	/* Ethernet */ | 
|  | 0,	/* Image Sensor Interface */ | 
|  | 5,	/* USART 3 */ | 
|  | 5,	/* USART 4 */ | 
|  | 5,	/* USART 5 */ | 
|  | 0,	/* Timer Counter 3 */ | 
|  | 0,	/* Timer Counter 4 */ | 
|  | 0,	/* Timer Counter 5 */ | 
|  | 0,	/* Advanced Interrupt Controller */ | 
|  | 0,	/* Advanced Interrupt Controller */ | 
|  | 0,	/* Advanced Interrupt Controller */ | 
|  | }; | 
|  |  | 
|  | void __init at91sam9260_init_interrupts(unsigned int priority[NR_AIC_IRQS]) | 
|  | { | 
|  | if (!priority) | 
|  | priority = at91sam9260_default_irq_priority; | 
|  |  | 
|  | /* Initialize the AIC interrupt controller */ | 
|  | at91_aic_init(priority); | 
|  |  | 
|  | /* Enable GPIO interrupts */ | 
|  | at91_gpio_irq_setup(); | 
|  | } |