|  | /* | 
|  | * linux/arch/mips/txx9/pci.c | 
|  | * | 
|  | * Based on linux/arch/mips/txx9/rbtx4927/setup.c, | 
|  | *          linux/arch/mips/txx9/rbtx4938/setup.c, | 
|  | *	    and RBTX49xx patch from CELF patch archive. | 
|  | * | 
|  | * Copyright 2001-2005 MontaVista Software Inc. | 
|  | * Copyright (C) 1996, 97, 2001, 04  Ralf Baechle (ralf@linux-mips.org) | 
|  | * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007 | 
|  | * | 
|  | * This file is subject to the terms and conditions of the GNU General Public | 
|  | * License.  See the file "COPYING" in the main directory of this archive | 
|  | * for more details. | 
|  | */ | 
|  | #include <linux/delay.h> | 
|  | #include <linux/jiffies.h> | 
|  | #include <linux/io.h> | 
|  | #include <asm/txx9/generic.h> | 
|  | #include <asm/txx9/pci.h> | 
|  | #ifdef CONFIG_TOSHIBA_FPCIB0 | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/slab.h> | 
|  | #include <asm/i8259.h> | 
|  | #include <asm/txx9/smsc_fdc37m81x.h> | 
|  | #endif | 
|  |  | 
|  | static int __init | 
|  | early_read_config_word(struct pci_controller *hose, | 
|  | int top_bus, int bus, int devfn, int offset, u16 *value) | 
|  | { | 
|  | struct pci_dev fake_dev; | 
|  | struct pci_bus fake_bus; | 
|  |  | 
|  | fake_dev.bus = &fake_bus; | 
|  | fake_dev.sysdata = hose; | 
|  | fake_dev.devfn = devfn; | 
|  | fake_bus.number = bus; | 
|  | fake_bus.sysdata = hose; | 
|  | fake_bus.ops = hose->pci_ops; | 
|  |  | 
|  | if (bus != top_bus) | 
|  | /* Fake a parent bus structure. */ | 
|  | fake_bus.parent = &fake_bus; | 
|  | else | 
|  | fake_bus.parent = NULL; | 
|  |  | 
|  | return pci_read_config_word(&fake_dev, offset, value); | 
|  | } | 
|  |  | 
|  | int __init txx9_pci66_check(struct pci_controller *hose, int top_bus, | 
|  | int current_bus) | 
|  | { | 
|  | u32 pci_devfn; | 
|  | unsigned short vid; | 
|  | int cap66 = -1; | 
|  | u16 stat; | 
|  |  | 
|  | /* It seems SLC90E66 needs some time after PCI reset... */ | 
|  | mdelay(80); | 
|  |  | 
|  | printk(KERN_INFO "PCI: Checking 66MHz capabilities...\n"); | 
|  |  | 
|  | for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) { | 
|  | if (PCI_FUNC(pci_devfn)) | 
|  | continue; | 
|  | if (early_read_config_word(hose, top_bus, current_bus, | 
|  | pci_devfn, PCI_VENDOR_ID, &vid) != | 
|  | PCIBIOS_SUCCESSFUL) | 
|  | continue; | 
|  | if (vid == 0xffff) | 
|  | continue; | 
|  |  | 
|  | /* check 66MHz capability */ | 
|  | if (cap66 < 0) | 
|  | cap66 = 1; | 
|  | if (cap66) { | 
|  | early_read_config_word(hose, top_bus, current_bus, | 
|  | pci_devfn, PCI_STATUS, &stat); | 
|  | if (!(stat & PCI_STATUS_66MHZ)) { | 
|  | printk(KERN_DEBUG | 
|  | "PCI: %02x:%02x not 66MHz capable.\n", | 
|  | current_bus, pci_devfn); | 
|  | cap66 = 0; | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  | return cap66 > 0; | 
|  | } | 
|  |  | 
|  | static struct resource primary_pci_mem_res[2] = { | 
|  | { .name = "PCI MEM" }, | 
|  | { .name = "PCI MMIO" }, | 
|  | }; | 
|  | static struct resource primary_pci_io_res = { .name = "PCI IO" }; | 
|  | struct pci_controller txx9_primary_pcic = { | 
|  | .mem_resource = &primary_pci_mem_res[0], | 
|  | .io_resource = &primary_pci_io_res, | 
|  | }; | 
|  |  | 
|  | #ifdef CONFIG_64BIT | 
|  | int txx9_pci_mem_high __initdata = 1; | 
|  | #else | 
|  | int txx9_pci_mem_high __initdata; | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * allocate pci_controller and resources. | 
|  | * mem_base, io_base: physical address.  0 for auto assignment. | 
|  | * mem_size and io_size means max size on auto assignment. | 
|  | * pcic must be &txx9_primary_pcic or NULL. | 
|  | */ | 
|  | struct pci_controller *__init | 
|  | txx9_alloc_pci_controller(struct pci_controller *pcic, | 
|  | unsigned long mem_base, unsigned long mem_size, | 
|  | unsigned long io_base, unsigned long io_size) | 
|  | { | 
|  | struct pcic { | 
|  | struct pci_controller c; | 
|  | struct resource r_mem[2]; | 
|  | struct resource r_io; | 
|  | } *new = NULL; | 
|  | int min_size = 0x10000; | 
|  |  | 
|  | if (!pcic) { | 
|  | new = kzalloc(sizeof(*new), GFP_KERNEL); | 
|  | if (!new) | 
|  | return NULL; | 
|  | new->r_mem[0].name = "PCI mem"; | 
|  | new->r_mem[1].name = "PCI mmio"; | 
|  | new->r_io.name = "PCI io"; | 
|  | new->c.mem_resource = new->r_mem; | 
|  | new->c.io_resource = &new->r_io; | 
|  | pcic = &new->c; | 
|  | } else | 
|  | BUG_ON(pcic != &txx9_primary_pcic); | 
|  | pcic->io_resource->flags = IORESOURCE_IO; | 
|  |  | 
|  | /* | 
|  | * for auto assignment, first search a (big) region for PCI | 
|  | * MEM, then search a region for PCI IO. | 
|  | */ | 
|  | if (mem_base) { | 
|  | pcic->mem_resource[0].start = mem_base; | 
|  | pcic->mem_resource[0].end = mem_base + mem_size - 1; | 
|  | if (request_resource(&iomem_resource, &pcic->mem_resource[0])) | 
|  | goto free_and_exit; | 
|  | } else { | 
|  | unsigned long min = 0, max = 0x20000000; /* low 512MB */ | 
|  | if (!mem_size) { | 
|  | /* default size for auto assignment */ | 
|  | if (txx9_pci_mem_high) | 
|  | mem_size = 0x20000000;	/* mem:512M(max) */ | 
|  | else | 
|  | mem_size = 0x08000000;	/* mem:128M(max) */ | 
|  | } | 
|  | if (txx9_pci_mem_high) { | 
|  | min = 0x20000000; | 
|  | max = 0xe0000000; | 
|  | } | 
|  | /* search free region for PCI MEM */ | 
|  | for (; mem_size >= min_size; mem_size /= 2) { | 
|  | if (allocate_resource(&iomem_resource, | 
|  | &pcic->mem_resource[0], | 
|  | mem_size, min, max, | 
|  | mem_size, NULL, NULL) == 0) | 
|  | break; | 
|  | } | 
|  | if (mem_size < min_size) | 
|  | goto free_and_exit; | 
|  | } | 
|  |  | 
|  | pcic->mem_resource[1].flags = IORESOURCE_MEM | IORESOURCE_BUSY; | 
|  | if (io_base) { | 
|  | pcic->mem_resource[1].start = io_base; | 
|  | pcic->mem_resource[1].end = io_base + io_size - 1; | 
|  | if (request_resource(&iomem_resource, &pcic->mem_resource[1])) | 
|  | goto release_and_exit; | 
|  | } else { | 
|  | if (!io_size) | 
|  | /* default size for auto assignment */ | 
|  | io_size = 0x01000000;	/* io:16M(max) */ | 
|  | /* search free region for PCI IO in low 512MB */ | 
|  | for (; io_size >= min_size; io_size /= 2) { | 
|  | if (allocate_resource(&iomem_resource, | 
|  | &pcic->mem_resource[1], | 
|  | io_size, 0, 0x20000000, | 
|  | io_size, NULL, NULL) == 0) | 
|  | break; | 
|  | } | 
|  | if (io_size < min_size) | 
|  | goto release_and_exit; | 
|  | io_base = pcic->mem_resource[1].start; | 
|  | } | 
|  |  | 
|  | pcic->mem_resource[0].flags = IORESOURCE_MEM; | 
|  | if (pcic == &txx9_primary_pcic && | 
|  | mips_io_port_base == (unsigned long)-1) { | 
|  | /* map ioport 0 to PCI I/O space address 0 */ | 
|  | set_io_port_base(IO_BASE + pcic->mem_resource[1].start); | 
|  | pcic->io_resource->start = 0; | 
|  | pcic->io_offset = 0;	/* busaddr == ioaddr */ | 
|  | pcic->io_map_base = IO_BASE + pcic->mem_resource[1].start; | 
|  | } else { | 
|  | /* physaddr to ioaddr */ | 
|  | pcic->io_resource->start = | 
|  | io_base - (mips_io_port_base - IO_BASE); | 
|  | pcic->io_offset = io_base - (mips_io_port_base - IO_BASE); | 
|  | pcic->io_map_base = mips_io_port_base; | 
|  | } | 
|  | pcic->io_resource->end = pcic->io_resource->start + io_size - 1; | 
|  |  | 
|  | pcic->mem_offset = 0;	/* busaddr == physaddr */ | 
|  |  | 
|  | printk(KERN_INFO "PCI: IO %pR MEM %pR\n", | 
|  | &pcic->mem_resource[1], &pcic->mem_resource[0]); | 
|  |  | 
|  | /* register_pci_controller() will request MEM resource */ | 
|  | release_resource(&pcic->mem_resource[0]); | 
|  | return pcic; | 
|  | release_and_exit: | 
|  | release_resource(&pcic->mem_resource[0]); | 
|  | free_and_exit: | 
|  | kfree(new); | 
|  | printk(KERN_ERR "PCI: Failed to allocate resources.\n"); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static int __init | 
|  | txx9_arch_pci_init(void) | 
|  | { | 
|  | PCIBIOS_MIN_IO = 0x8000;	/* reseve legacy I/O space */ | 
|  | return 0; | 
|  | } | 
|  | arch_initcall(txx9_arch_pci_init); | 
|  |  | 
|  | /* IRQ/IDSEL mapping */ | 
|  | int txx9_pci_option = | 
|  | #ifdef CONFIG_PICMG_PCI_BACKPLANE_DEFAULT | 
|  | TXX9_PCI_OPT_PICMG | | 
|  | #endif | 
|  | TXX9_PCI_OPT_CLK_AUTO; | 
|  |  | 
|  | enum txx9_pci_err_action txx9_pci_err_action = TXX9_PCI_ERR_REPORT; | 
|  |  | 
|  | #ifdef CONFIG_TOSHIBA_FPCIB0 | 
|  | static irqreturn_t i8259_interrupt(int irq, void *dev_id) | 
|  | { | 
|  | int isairq; | 
|  |  | 
|  | isairq = i8259_irq(); | 
|  | if (unlikely(isairq <= I8259A_IRQ_BASE)) | 
|  | return IRQ_NONE; | 
|  | generic_handle_irq(isairq); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static int __init | 
|  | txx9_i8259_irq_setup(int irq) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | init_i8259_irqs(); | 
|  | err = request_irq(irq, &i8259_interrupt, IRQF_DISABLED|IRQF_SHARED, | 
|  | "cascade(i8259)", (void *)(long)irq); | 
|  | if (!err) | 
|  | printk(KERN_INFO "PCI-ISA bridge PIC (irq %d)\n", irq); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void __init quirk_slc90e66_bridge(struct pci_dev *dev) | 
|  | { | 
|  | int irq;	/* PCI/ISA Bridge interrupt */ | 
|  | u8 reg_64; | 
|  | u32 reg_b0; | 
|  | u8 reg_e1; | 
|  | irq = pcibios_map_irq(dev, PCI_SLOT(dev->devfn), 1); /* INTA */ | 
|  | if (!irq) | 
|  | return; | 
|  | txx9_i8259_irq_setup(irq); | 
|  | pci_read_config_byte(dev, 0x64, ®_64); | 
|  | pci_read_config_dword(dev, 0xb0, ®_b0); | 
|  | pci_read_config_byte(dev, 0xe1, ®_e1); | 
|  | /* serial irq control */ | 
|  | reg_64 = 0xd0; | 
|  | /* serial irq pin */ | 
|  | reg_b0 |= 0x00010000; | 
|  | /* ide irq on isa14 */ | 
|  | reg_e1 &= 0xf0; | 
|  | reg_e1 |= 0x0d; | 
|  | pci_write_config_byte(dev, 0x64, reg_64); | 
|  | pci_write_config_dword(dev, 0xb0, reg_b0); | 
|  | pci_write_config_byte(dev, 0xe1, reg_e1); | 
|  |  | 
|  | smsc_fdc37m81x_init(0x3f0); | 
|  | smsc_fdc37m81x_config_beg(); | 
|  | smsc_fdc37m81x_config_set(SMSC_FDC37M81X_DNUM, | 
|  | SMSC_FDC37M81X_KBD); | 
|  | smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT, 1); | 
|  | smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT2, 12); | 
|  | smsc_fdc37m81x_config_set(SMSC_FDC37M81X_ACTIVE, | 
|  | 1); | 
|  | smsc_fdc37m81x_config_end(); | 
|  | } | 
|  |  | 
|  | static void quirk_slc90e66_ide(struct pci_dev *dev) | 
|  | { | 
|  | unsigned char dat; | 
|  | int regs[2] = {0x41, 0x43}; | 
|  | int i; | 
|  |  | 
|  | /* SMSC SLC90E66 IDE uses irq 14, 15 (default) */ | 
|  | pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 14); | 
|  | pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &dat); | 
|  | printk(KERN_INFO "PCI: %s: IRQ %02x", pci_name(dev), dat); | 
|  | /* enable SMSC SLC90E66 IDE */ | 
|  | for (i = 0; i < ARRAY_SIZE(regs); i++) { | 
|  | pci_read_config_byte(dev, regs[i], &dat); | 
|  | pci_write_config_byte(dev, regs[i], dat | 0x80); | 
|  | pci_read_config_byte(dev, regs[i], &dat); | 
|  | printk(KERN_CONT " IDETIM%d %02x", i, dat); | 
|  | } | 
|  | pci_read_config_byte(dev, 0x5c, &dat); | 
|  | /* | 
|  | * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!! | 
|  | * | 
|  | * This line of code is intended to provide the user with a work | 
|  | * around solution to the anomalies cited in SMSC's anomaly sheet | 
|  | * entitled, "SLC90E66 Functional Rev.J_0.1 Anomalies"". | 
|  | * | 
|  | * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!! | 
|  | */ | 
|  | dat |= 0x01; | 
|  | pci_write_config_byte(dev, regs[i], dat); | 
|  | pci_read_config_byte(dev, 0x5c, &dat); | 
|  | printk(KERN_CONT " REG5C %02x", dat); | 
|  | printk(KERN_CONT "\n"); | 
|  | } | 
|  | #endif /* CONFIG_TOSHIBA_FPCIB0 */ | 
|  |  | 
|  | static void tc35815_fixup(struct pci_dev *dev) | 
|  | { | 
|  | /* This device may have PM registers but not they are not suported. */ | 
|  | if (dev->pm_cap) { | 
|  | dev_info(&dev->dev, "PM disabled\n"); | 
|  | dev->pm_cap = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void final_fixup(struct pci_dev *dev) | 
|  | { | 
|  | unsigned char bist; | 
|  |  | 
|  | /* Do build-in self test */ | 
|  | if (pci_read_config_byte(dev, PCI_BIST, &bist) == PCIBIOS_SUCCESSFUL && | 
|  | (bist & PCI_BIST_CAPABLE)) { | 
|  | unsigned long timeout; | 
|  | pci_set_power_state(dev, PCI_D0); | 
|  | printk(KERN_INFO "PCI: %s BIST...", pci_name(dev)); | 
|  | pci_write_config_byte(dev, PCI_BIST, PCI_BIST_START); | 
|  | timeout = jiffies + HZ * 2;	/* timeout after 2 sec */ | 
|  | do { | 
|  | pci_read_config_byte(dev, PCI_BIST, &bist); | 
|  | if (time_after(jiffies, timeout)) | 
|  | break; | 
|  | } while (bist & PCI_BIST_START); | 
|  | if (bist & (PCI_BIST_CODE_MASK | PCI_BIST_START)) | 
|  | printk(KERN_CONT "failed. (0x%x)\n", bist); | 
|  | else | 
|  | printk(KERN_CONT "OK.\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_TOSHIBA_FPCIB0 | 
|  | #define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460 | 
|  | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_0, | 
|  | quirk_slc90e66_bridge); | 
|  | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1, | 
|  | quirk_slc90e66_ide); | 
|  | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1, | 
|  | quirk_slc90e66_ide); | 
|  | #endif | 
|  | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TOSHIBA_2, | 
|  | PCI_DEVICE_ID_TOSHIBA_TC35815_NWU, tc35815_fixup); | 
|  | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TOSHIBA_2, | 
|  | PCI_DEVICE_ID_TOSHIBA_TC35815_TX4939, tc35815_fixup); | 
|  | DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, final_fixup); | 
|  | DECLARE_PCI_FIXUP_RESUME(PCI_ANY_ID, PCI_ANY_ID, final_fixup); | 
|  |  | 
|  | int pcibios_plat_dev_init(struct pci_dev *dev) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) | 
|  | { | 
|  | return txx9_board_vec->pci_map_irq(dev, slot, pin); | 
|  | } | 
|  |  | 
|  | char * (*txx9_board_pcibios_setup)(char *str) __devinitdata; | 
|  |  | 
|  | char *__devinit txx9_pcibios_setup(char *str) | 
|  | { | 
|  | if (txx9_board_pcibios_setup && !txx9_board_pcibios_setup(str)) | 
|  | return NULL; | 
|  | if (!strcmp(str, "picmg")) { | 
|  | /* PICMG compliant backplane (TOSHIBA JMB-PICMG-ATX | 
|  | (5V or 3.3V), JMB-PICMG-L2 (5V only), etc.) */ | 
|  | txx9_pci_option |= TXX9_PCI_OPT_PICMG; | 
|  | return NULL; | 
|  | } else if (!strcmp(str, "nopicmg")) { | 
|  | /* non-PICMG compliant backplane (TOSHIBA | 
|  | RBHBK4100,RBHBK4200, Interface PCM-PCM05, etc.) */ | 
|  | txx9_pci_option &= ~TXX9_PCI_OPT_PICMG; | 
|  | return NULL; | 
|  | } else if (!strncmp(str, "clk=", 4)) { | 
|  | char *val = str + 4; | 
|  | txx9_pci_option &= ~TXX9_PCI_OPT_CLK_MASK; | 
|  | if (strcmp(val, "33") == 0) | 
|  | txx9_pci_option |= TXX9_PCI_OPT_CLK_33; | 
|  | else if (strcmp(val, "66") == 0) | 
|  | txx9_pci_option |= TXX9_PCI_OPT_CLK_66; | 
|  | else /* "auto" */ | 
|  | txx9_pci_option |= TXX9_PCI_OPT_CLK_AUTO; | 
|  | return NULL; | 
|  | } else if (!strncmp(str, "err=", 4)) { | 
|  | if (!strcmp(str + 4, "panic")) | 
|  | txx9_pci_err_action = TXX9_PCI_ERR_PANIC; | 
|  | else if (!strcmp(str + 4, "ignore")) | 
|  | txx9_pci_err_action = TXX9_PCI_ERR_IGNORE; | 
|  | return NULL; | 
|  | } | 
|  | return str; | 
|  | } |