)]}'
{
  "commit": "800e69fbd2faea906cabd10ddb77e36410f2bd9c",
  "tree": "8497fdc40a579161d9fc0a0cb58ec5ba020a4296",
  "parents": [
    "631eb227849e3bfdec2d2e628ee5a3f962db82e2"
  ],
  "author": {
    "name": "Ira W. Snyder",
    "email": "iws@ovro.caltech.edu",
    "time": "Wed Apr 07 10:08:01 2010 +0200"
  },
  "committer": {
    "name": "Samuel Ortiz",
    "email": "sameo@linux.intel.com",
    "time": "Fri May 28 01:37:33 2010 +0200"
  },
  "message": "gpio: Add support for Janz VMOD-TTL Digital IO module\n\nThe Janz VMOD-TTL is a MODULbus daughterboard which fits onto any MODULbus\ncarrier board. It essentially consists of some various logic and a Zilog\nZ8536 CIO Counter/Timer and Parallel IO Unit.\n\nThe board must be physically configured with jumpers to enable a user to\ndrive output signals. I am only interested in outputs, so I have made this\ndriver as simple as possible. It only supports a very minimal subset of the\nfeatures provided by the Z8536 chip.\n\nSigned-off-by: Ira W. Snyder \u003ciws@ovro.caltech.edu\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "56eb0c59c512b324225f3b5dd60c10fe743957e0",
      "old_mode": 33188,
      "old_path": "drivers/gpio/Kconfig",
      "new_id": "0e9c16b5bbce5ef42813065ecb5744cc0d6a928d",
      "new_mode": 33188,
      "new_path": "drivers/gpio/Kconfig"
    },
    {
      "type": "modify",
      "old_id": "d3226d395a90c687261b0c7b0d0eada12a228fe9",
      "old_mode": 33188,
      "old_path": "drivers/gpio/Makefile",
      "new_id": "94a96c51c741808c2a940c3fda41d77757bad72e",
      "new_mode": 33188,
      "new_path": "drivers/gpio/Makefile"
    },
    {
      "type": "add",
      "old_id": "0000000000000000000000000000000000000000",
      "old_mode": 0,
      "old_path": "/dev/null",
      "new_id": "813ac077e5d7d5b0d25e465c53dcb10a023ef595",
      "new_mode": 33188,
      "new_path": "drivers/gpio/janz-ttl.c"
    }
  ]
}