fs: yaffs: Import yaffs from Thu Dec 23 13:31:37 2010 +1300
commit ddf33fed15c2376bfb602d62dd018c63fce60df8
Author: Timothy Manning <tfhmanning@gmail.com>
Date: Thu Dec 23 13:31:37 2010 +1300
yaffs updated direct/timothy_tests/quick_tests
Signed-off-by: Timothy Manning <tfhmanning@gmail.com>
Change-Id: I5bbe5a05277bdf8a6fe188bbe4c77725b3fa2aae
Signed-off-by: Dima Zavin <dima@android.com>
diff --git a/fs/yaffs2/Kconfig b/fs/yaffs2/Kconfig
new file mode 100644
index 0000000..6354140
--- /dev/null
+++ b/fs/yaffs2/Kconfig
@@ -0,0 +1,161 @@
+#
+# YAFFS file system configurations
+#
+
+config YAFFS_FS
+ tristate "YAFFS2 file system support"
+ default n
+ depends on MTD_BLOCK
+ select YAFFS_YAFFS1
+ select YAFFS_YAFFS2
+ help
+ YAFFS2, or Yet Another Flash Filing System, is a filing system
+ optimised for NAND Flash chips.
+
+ To compile the YAFFS2 file system support as a module, choose M
+ here: the module will be called yaffs2.
+
+ If unsure, say N.
+
+ Further information on YAFFS2 is available at
+ <http://www.aleph1.co.uk/yaffs/>.
+
+config YAFFS_YAFFS1
+ bool "512 byte / page devices"
+ depends on YAFFS_FS
+ default y
+ help
+ Enable YAFFS1 support -- yaffs for 512 byte / page devices
+
+ Not needed for 2K-page devices.
+
+ If unsure, say Y.
+
+config YAFFS_9BYTE_TAGS
+ bool "Use older-style on-NAND data format with pageStatus byte"
+ depends on YAFFS_YAFFS1
+ default n
+ help
+
+ Older-style on-NAND data format has a "pageStatus" byte to record
+ chunk/page state. This byte is zero when the page is discarded.
+ Choose this option if you have existing on-NAND data using this
+ format that you need to continue to support. New data written
+ also uses the older-style format. Note: Use of this option
+ generally requires that MTD's oob layout be adjusted to use the
+ older-style format. See notes on tags formats and MTD versions
+ in yaffs_mtdif1.c.
+
+ If unsure, say N.
+
+config YAFFS_DOES_ECC
+ bool "Lets Yaffs do its own ECC"
+ depends on YAFFS_FS && YAFFS_YAFFS1 && !YAFFS_9BYTE_TAGS
+ default n
+ help
+ This enables Yaffs to use its own ECC functions instead of using
+ the ones from the generic MTD-NAND driver.
+
+ If unsure, say N.
+
+config YAFFS_ECC_WRONG_ORDER
+ bool "Use the same ecc byte order as Steven Hill's nand_ecc.c"
+ depends on YAFFS_FS && YAFFS_DOES_ECC && !YAFFS_9BYTE_TAGS
+ default n
+ help
+ This makes yaffs_ecc.c use the same ecc byte order as Steven
+ Hill's nand_ecc.c. If not set, then you get the same ecc byte
+ order as SmartMedia.
+
+ If unsure, say N.
+
+config YAFFS_YAFFS2
+ bool "2048 byte (or larger) / page devices"
+ depends on YAFFS_FS
+ default y
+ help
+ Enable YAFFS2 support -- yaffs for >= 2K bytes per page devices
+
+ If unsure, say Y.
+
+config YAFFS_AUTO_YAFFS2
+ bool "Autoselect yaffs2 format"
+ depends on YAFFS_YAFFS2
+ default y
+ help
+ Without this, you need to explicitely use yaffs2 as the file
+ system type. With this, you can say "yaffs" and yaffs or yaffs2
+ will be used depending on the device page size (yaffs on
+ 512-byte page devices, yaffs2 on 2K page devices).
+
+ If unsure, say Y.
+
+config YAFFS_DISABLE_TAGS_ECC
+ bool "Disable YAFFS from doing ECC on tags by default"
+ depends on YAFFS_FS && YAFFS_YAFFS2
+ default n
+ help
+ This defaults Yaffs to using its own ECC calculations on tags instead of
+ just relying on the MTD.
+ This behavior can also be overridden with tags_ecc_on and
+ tags_ecc_off mount options.
+
+ If unsure, say N.
+
+config YAFFS_ALWAYS_CHECK_CHUNK_ERASED
+ bool "Force chunk erase check"
+ depends on YAFFS_FS
+ default n
+ help
+ Normally YAFFS only checks chunks before writing until an erased
+ chunk is found. This helps to detect any partially written
+ chunks that might have happened due to power loss.
+
+ Enabling this forces on the test that chunks are erased in flash
+ before writing to them. This takes more time but is potentially
+ a bit more secure.
+
+ Suggest setting Y during development and ironing out driver
+ issues etc. Suggest setting to N if you want faster writing.
+
+ If unsure, say Y.
+
+config YAFFS_EMPTY_LOST_AND_FOUND
+ bool "Empty lost and found on boot"
+ depends on YAFFS_FS
+ default n
+ help
+ If this is enabled then the contents of lost and found is
+ automatically dumped at mount.
+
+ If unsure, say N.
+
+config YAFFS_DISABLE_BLOCK_REFRESHING
+ bool "Disable yaffs2 block refreshing"
+ depends on YAFFS_FS
+ default n
+ help
+ If this is set, then block refreshing is disabled.
+ Block refreshing infrequently refreshes the oldest block in
+ a yaffs2 file system. This mechanism helps to refresh flash to
+ mitigate against data loss. This is particularly useful for MLC.
+
+ If unsure, say N.
+
+config YAFFS_DISABLE_BACKGROUND
+ bool "Disable yaffs2 background processing"
+ depends on YAFFS_FS
+ default n
+ help
+ If this is set, then background processing is disabled.
+ Background processing makes many foreground activities faster.
+
+ If unsure, say N.
+
+config YAFFS_XATTR
+ bool "Enable yaffs2 xattr support"
+ depends on YAFFS_FS
+ default y
+ help
+ If this is set then yaffs2 will provide xattr support.
+ If unsure, say Y.