[ISDN] Hisax: eliminate many unnecessary references to CardType[]
For the vast majority of CardType[card->typ] uses (but not all!),
the string is constant for each driver. Therefore, we may replace
CardType[card->typ] with the actual string describing the driver, making
each printk() a bit more simple.
This also has the nice, intended side effect of greatly reducing
external references to hisax global CardType[]. This will be of value
once the ISDN drivers are converted to the ISA/PCI/PNP hotplug APIs.
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
diff --git a/drivers/isdn/hisax/ix1_micro.c b/drivers/isdn/hisax/ix1_micro.c
index 252d79d..2d18d4f 100644
--- a/drivers/isdn/hisax/ix1_micro.c
+++ b/drivers/isdn/hisax/ix1_micro.c
@@ -24,7 +24,6 @@
#include "hscx.h"
#include "isdnl1.h"
-extern const char *CardType[];
static const char *ix1_revision = "$Revision: 2.12.2.4 $";
#define byteout(addr,val) outb(val,addr)
@@ -288,15 +287,15 @@
if (cs->hw.ix1.cfg_reg) {
if (!request_region(cs->hw.ix1.cfg_reg, 4, "ix1micro cfg")) {
printk(KERN_WARNING
- "HiSax: %s config port %x-%x already in use\n",
- CardType[card->typ],
+ "HiSax: ITK ix1-micro Rev.2 config port "
+ "%x-%x already in use\n",
cs->hw.ix1.cfg_reg,
cs->hw.ix1.cfg_reg + 4);
return (0);
}
}
- printk(KERN_INFO "HiSax: %s config irq:%d io:0x%X\n",
- CardType[cs->typ], cs->irq, cs->hw.ix1.cfg_reg);
+ printk(KERN_INFO "HiSax: ITK ix1-micro Rev.2 config irq:%d io:0x%X\n",
+ cs->irq, cs->hw.ix1.cfg_reg);
setup_isac(cs);
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;