iwlegacy: rename il_{read,write}32 to _il_{rd,wr}
Introduce rule that underscore at the beginning mean unlocked I/O method.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
diff --git a/drivers/net/wireless/iwlegacy/iwl-csr.h b/drivers/net/wireless/iwlegacy/iwl-csr.h
index 24b71ae..faffb8e 100644
--- a/drivers/net/wireless/iwlegacy/iwl-csr.h
+++ b/drivers/net/wireless/iwlegacy/iwl-csr.h
@@ -70,7 +70,7 @@
* low power states due to driver-invoked device resets
* (e.g. CSR_RESET_REG_FLAG_SW_RESET) or uCode-driven power-saving modes.
*
- * Use il_write32() and il_read32() family to access these registers;
+ * Use _il_wr() and _il_rd() family to access these registers;
* these provide simple PCI bus access, without waking up the MAC.
* Do not use il_write_direct32() family for these registers;
* no need to "grab nic access" via CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ.
@@ -91,7 +91,7 @@
#define CSR_RESET (CSR_BASE+0x020) /* busmaster enable, NMI, etc*/
#define CSR_GP_CNTRL (CSR_BASE+0x024)
-/* 2nd byte of CSR_INT_COALESCING, not accessible via il_write32()! */
+/* 2nd byte of CSR_INT_COALESCING, not accessible via _il_wr()! */
#define CSR_INT_PERIODIC_REG (CSR_BASE+0x005)
/*
@@ -374,7 +374,7 @@
* to make sure the MAC (uCode processor, etc.) is powered up for accessing
* internal resources.
*
- * Do not use il_write32()/il_read32() family to access these registers;
+ * Do not use _il_wr()/_il_rd() family to access these registers;
* these provide only simple PCI bus access, without waking up the MAC.
*/
#define HBUS_BASE (0x400)