|  | /****************************************************************************** | 
|  | * | 
|  | * Module Name: tbconvrt - ACPI Table conversion utilities | 
|  | * | 
|  | *****************************************************************************/ | 
|  |  | 
|  | /* | 
|  | * Copyright (C) 2000 - 2005, R. Byron Moore | 
|  | * All rights reserved. | 
|  | * | 
|  | * Redistribution and use in source and binary forms, with or without | 
|  | * modification, are permitted provided that the following conditions | 
|  | * are met: | 
|  | * 1. Redistributions of source code must retain the above copyright | 
|  | *    notice, this list of conditions, and the following disclaimer, | 
|  | *    without modification. | 
|  | * 2. Redistributions in binary form must reproduce at minimum a disclaimer | 
|  | *    substantially similar to the "NO WARRANTY" disclaimer below | 
|  | *    ("Disclaimer") and any redistribution must be conditioned upon | 
|  | *    including a substantially similar Disclaimer requirement for further | 
|  | *    binary redistribution. | 
|  | * 3. Neither the names of the above-listed copyright holders nor the names | 
|  | *    of any contributors may be used to endorse or promote products derived | 
|  | *    from this software without specific prior written permission. | 
|  | * | 
|  | * Alternatively, this software may be distributed under the terms of the | 
|  | * GNU General Public License ("GPL") version 2 as published by the Free | 
|  | * Software Foundation. | 
|  | * | 
|  | * NO WARRANTY | 
|  | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | 
|  | * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | 
|  | * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR | 
|  | * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | 
|  | * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | 
|  | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | 
|  | * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | 
|  | * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | 
|  | * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING | 
|  | * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | 
|  | * POSSIBILITY OF SUCH DAMAGES. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  |  | 
|  | #include <acpi/acpi.h> | 
|  | #include <acpi/actables.h> | 
|  |  | 
|  |  | 
|  | #define _COMPONENT          ACPI_TABLES | 
|  | ACPI_MODULE_NAME    ("tbconvrt") | 
|  |  | 
|  | /* Local prototypes */ | 
|  |  | 
|  | static void | 
|  | acpi_tb_init_generic_address ( | 
|  | struct acpi_generic_address     *new_gas_struct, | 
|  | u8                              register_bit_width, | 
|  | acpi_physical_address           address); | 
|  |  | 
|  | static void | 
|  | acpi_tb_convert_fadt1 ( | 
|  | struct fadt_descriptor_rev2    *local_fadt, | 
|  | struct fadt_descriptor_rev1    *original_fadt); | 
|  |  | 
|  | static void | 
|  | acpi_tb_convert_fadt2 ( | 
|  | struct fadt_descriptor_rev2    *local_fadt, | 
|  | struct fadt_descriptor_rev2    *original_fadt); | 
|  |  | 
|  |  | 
|  | u8 acpi_fadt_is_v1; | 
|  | EXPORT_SYMBOL(acpi_fadt_is_v1); | 
|  |  | 
|  | /******************************************************************************* | 
|  | * | 
|  | * FUNCTION:    acpi_tb_get_table_count | 
|  | * | 
|  | * PARAMETERS:  RSDP            - Pointer to the RSDP | 
|  | *              RSDT            - Pointer to the RSDT/XSDT | 
|  | * | 
|  | * RETURN:      The number of tables pointed to by the RSDT or XSDT. | 
|  | * | 
|  | * DESCRIPTION: Calculate the number of tables.  Automatically handles either | 
|  | *              an RSDT or XSDT. | 
|  | * | 
|  | ******************************************************************************/ | 
|  |  | 
|  | u32 | 
|  | acpi_tb_get_table_count ( | 
|  | struct rsdp_descriptor          *RSDP, | 
|  | struct acpi_table_header        *RSDT) | 
|  | { | 
|  | u32                             pointer_size; | 
|  |  | 
|  |  | 
|  | ACPI_FUNCTION_ENTRY (); | 
|  |  | 
|  |  | 
|  | if (RSDP->revision < 2) { | 
|  | pointer_size = sizeof (u32); | 
|  | } | 
|  | else { | 
|  | pointer_size = sizeof (u64); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Determine the number of tables pointed to by the RSDT/XSDT. | 
|  | * This is defined by the ACPI Specification to be the number of | 
|  | * pointers contained within the RSDT/XSDT.  The size of the pointers | 
|  | * is architecture-dependent. | 
|  | */ | 
|  | return ((RSDT->length - sizeof (struct acpi_table_header)) / pointer_size); | 
|  | } | 
|  |  | 
|  |  | 
|  | /******************************************************************************* | 
|  | * | 
|  | * FUNCTION:    acpi_tb_convert_to_xsdt | 
|  | * | 
|  | * PARAMETERS:  table_info      - Info about the RSDT | 
|  | * | 
|  | * RETURN:      Status | 
|  | * | 
|  | * DESCRIPTION: Convert an RSDT to an XSDT (internal common format) | 
|  | * | 
|  | ******************************************************************************/ | 
|  |  | 
|  | acpi_status | 
|  | acpi_tb_convert_to_xsdt ( | 
|  | struct acpi_table_desc          *table_info) | 
|  | { | 
|  | acpi_size                       table_size; | 
|  | u32                             i; | 
|  | XSDT_DESCRIPTOR         *new_table; | 
|  |  | 
|  |  | 
|  | ACPI_FUNCTION_ENTRY (); | 
|  |  | 
|  |  | 
|  | /* Compute size of the converted XSDT */ | 
|  |  | 
|  | table_size = ((acpi_size) acpi_gbl_rsdt_table_count * sizeof (u64)) + | 
|  | sizeof (struct acpi_table_header); | 
|  |  | 
|  | /* Allocate an XSDT */ | 
|  |  | 
|  | new_table = ACPI_MEM_CALLOCATE (table_size); | 
|  | if (!new_table) { | 
|  | return (AE_NO_MEMORY); | 
|  | } | 
|  |  | 
|  | /* Copy the header and set the length */ | 
|  |  | 
|  | ACPI_MEMCPY (new_table, table_info->pointer, sizeof (struct acpi_table_header)); | 
|  | new_table->length = (u32) table_size; | 
|  |  | 
|  | /* Copy the table pointers */ | 
|  |  | 
|  | for (i = 0; i < acpi_gbl_rsdt_table_count; i++) { | 
|  | if (acpi_gbl_RSDP->revision < 2) { | 
|  | ACPI_STORE_ADDRESS (new_table->table_offset_entry[i], | 
|  | (ACPI_CAST_PTR (struct rsdt_descriptor_rev1, | 
|  | table_info->pointer))->table_offset_entry[i]); | 
|  | } | 
|  | else { | 
|  | new_table->table_offset_entry[i] = | 
|  | (ACPI_CAST_PTR (XSDT_DESCRIPTOR, | 
|  | table_info->pointer))->table_offset_entry[i]; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Delete the original table (either mapped or in a buffer) */ | 
|  |  | 
|  | acpi_tb_delete_single_table (table_info); | 
|  |  | 
|  | /* Point the table descriptor to the new table */ | 
|  |  | 
|  | table_info->pointer     = ACPI_CAST_PTR (struct acpi_table_header, new_table); | 
|  | table_info->length      = table_size; | 
|  | table_info->allocation  = ACPI_MEM_ALLOCATED; | 
|  |  | 
|  | return (AE_OK); | 
|  | } | 
|  |  | 
|  |  | 
|  | /******************************************************************************* | 
|  | * | 
|  | * FUNCTION:    acpi_tb_init_generic_address | 
|  | * | 
|  | * PARAMETERS:  new_gas_struct      - GAS struct to be initialized | 
|  | *              register_bit_width  - Width of this register | 
|  | *              Address             - Address of the register | 
|  | * | 
|  | * RETURN:      None | 
|  | * | 
|  | * DESCRIPTION: Initialize a GAS structure. | 
|  | * | 
|  | ******************************************************************************/ | 
|  |  | 
|  | static void | 
|  | acpi_tb_init_generic_address ( | 
|  | struct acpi_generic_address     *new_gas_struct, | 
|  | u8                              register_bit_width, | 
|  | acpi_physical_address           address) | 
|  | { | 
|  |  | 
|  | ACPI_STORE_ADDRESS (new_gas_struct->address, address); | 
|  |  | 
|  | new_gas_struct->address_space_id = ACPI_ADR_SPACE_SYSTEM_IO; | 
|  | new_gas_struct->register_bit_width = register_bit_width; | 
|  | new_gas_struct->register_bit_offset = 0; | 
|  | new_gas_struct->access_width    = 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /******************************************************************************* | 
|  | * | 
|  | * FUNCTION:    acpi_tb_convert_fadt1 | 
|  | * | 
|  | * PARAMETERS:  local_fadt      - Pointer to new FADT | 
|  | *              original_fadt   - Pointer to old FADT | 
|  | * | 
|  | * RETURN:      None, populates local_fadt | 
|  | * | 
|  | * DESCRIPTION: Convert an ACPI 1.0 FADT to common internal format | 
|  | * | 
|  | ******************************************************************************/ | 
|  |  | 
|  | static void | 
|  | acpi_tb_convert_fadt1 ( | 
|  | struct fadt_descriptor_rev2    *local_fadt, | 
|  | struct fadt_descriptor_rev1    *original_fadt) | 
|  | { | 
|  |  | 
|  | /* ACPI 1.0 FACS */ | 
|  | /* The BIOS stored FADT should agree with Revision 1.0 */ | 
|  | acpi_fadt_is_v1 = 1; | 
|  |  | 
|  | /* | 
|  | * Copy the table header and the common part of the tables. | 
|  | * | 
|  | * The 2.0 table is an extension of the 1.0 table, so the entire 1.0 | 
|  | * table can be copied first, then expand some fields to 64 bits. | 
|  | */ | 
|  | ACPI_MEMCPY (local_fadt, original_fadt, sizeof (struct fadt_descriptor_rev1)); | 
|  |  | 
|  | /* Convert table pointers to 64-bit fields */ | 
|  |  | 
|  | ACPI_STORE_ADDRESS (local_fadt->xfirmware_ctrl, local_fadt->V1_firmware_ctrl); | 
|  | ACPI_STORE_ADDRESS (local_fadt->Xdsdt, local_fadt->V1_dsdt); | 
|  |  | 
|  | /* | 
|  | * System Interrupt Model isn't used in ACPI 2.0 | 
|  | * (local_fadt->Reserved1 = 0;) | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * This field is set by the OEM to convey the preferred power management | 
|  | * profile to OSPM. It doesn't have any 1.0 equivalence.  Since we don't | 
|  | * know what kind of 32-bit system this is, we will use "unspecified". | 
|  | */ | 
|  | local_fadt->prefer_PM_profile = PM_UNSPECIFIED; | 
|  |  | 
|  | /* | 
|  | * Processor Performance State Control. This is the value OSPM writes to | 
|  | * the SMI_CMD register to assume processor performance state control | 
|  | * responsibility. There isn't any equivalence in 1.0, but as many 1.x | 
|  | * ACPI tables contain _PCT and _PSS we also keep this value, unless | 
|  | * acpi_strict is set. | 
|  | */ | 
|  | if (acpi_strict) | 
|  | local_fadt->pstate_cnt = 0; | 
|  |  | 
|  | /* | 
|  | * Support for the _CST object and C States change notification. | 
|  | * This data item hasn't any 1.0 equivalence so leave it zero. | 
|  | */ | 
|  | local_fadt->cst_cnt = 0; | 
|  |  | 
|  | /* | 
|  | * FADT Rev 2 was an interim FADT released between ACPI 1.0 and ACPI 2.0. | 
|  | * It primarily adds the FADT reset mechanism. | 
|  | */ | 
|  | if ((original_fadt->revision == 2) && | 
|  | (original_fadt->length == sizeof (struct fadt_descriptor_rev2_minus))) { | 
|  | /* | 
|  | * Grab the entire generic address struct, plus the 1-byte reset value | 
|  | * that immediately follows. | 
|  | */ | 
|  | ACPI_MEMCPY (&local_fadt->reset_register, | 
|  | &(ACPI_CAST_PTR (struct fadt_descriptor_rev2_minus, | 
|  | original_fadt))->reset_register, | 
|  | sizeof (struct acpi_generic_address) + 1); | 
|  | } | 
|  | else { | 
|  | /* | 
|  | * Since there isn't any equivalence in 1.0 and since it is highly | 
|  | * likely that a 1.0 system has legacy support. | 
|  | */ | 
|  | local_fadt->iapc_boot_arch = BAF_LEGACY_DEVICES; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Convert the V1.0 block addresses to V2.0 GAS structures | 
|  | */ | 
|  | acpi_tb_init_generic_address (&local_fadt->xpm1a_evt_blk, local_fadt->pm1_evt_len, | 
|  | (acpi_physical_address)   local_fadt->V1_pm1a_evt_blk); | 
|  | acpi_tb_init_generic_address (&local_fadt->xpm1b_evt_blk, local_fadt->pm1_evt_len, | 
|  | (acpi_physical_address)   local_fadt->V1_pm1b_evt_blk); | 
|  | acpi_tb_init_generic_address (&local_fadt->xpm1a_cnt_blk, local_fadt->pm1_cnt_len, | 
|  | (acpi_physical_address)   local_fadt->V1_pm1a_cnt_blk); | 
|  | acpi_tb_init_generic_address (&local_fadt->xpm1b_cnt_blk, local_fadt->pm1_cnt_len, | 
|  | (acpi_physical_address)   local_fadt->V1_pm1b_cnt_blk); | 
|  | acpi_tb_init_generic_address (&local_fadt->xpm2_cnt_blk, local_fadt->pm2_cnt_len, | 
|  | (acpi_physical_address)   local_fadt->V1_pm2_cnt_blk); | 
|  | acpi_tb_init_generic_address (&local_fadt->xpm_tmr_blk, local_fadt->pm_tm_len, | 
|  | (acpi_physical_address)   local_fadt->V1_pm_tmr_blk); | 
|  | acpi_tb_init_generic_address (&local_fadt->xgpe0_blk, 0, | 
|  | (acpi_physical_address)   local_fadt->V1_gpe0_blk); | 
|  | acpi_tb_init_generic_address (&local_fadt->xgpe1_blk, 0, | 
|  | (acpi_physical_address)   local_fadt->V1_gpe1_blk); | 
|  |  | 
|  | /* Create separate GAS structs for the PM1 Enable registers */ | 
|  |  | 
|  | acpi_tb_init_generic_address (&acpi_gbl_xpm1a_enable, | 
|  | (u8) ACPI_DIV_2 (acpi_gbl_FADT->pm1_evt_len), | 
|  | (acpi_physical_address) | 
|  | (local_fadt->xpm1a_evt_blk.address + | 
|  | ACPI_DIV_2 (acpi_gbl_FADT->pm1_evt_len))); | 
|  |  | 
|  | /* PM1B is optional; leave null if not present */ | 
|  |  | 
|  | if (local_fadt->xpm1b_evt_blk.address) { | 
|  | acpi_tb_init_generic_address (&acpi_gbl_xpm1b_enable, | 
|  | (u8) ACPI_DIV_2 (acpi_gbl_FADT->pm1_evt_len), | 
|  | (acpi_physical_address) | 
|  | (local_fadt->xpm1b_evt_blk.address + | 
|  | ACPI_DIV_2 (acpi_gbl_FADT->pm1_evt_len))); | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | /******************************************************************************* | 
|  | * | 
|  | * FUNCTION:    acpi_tb_convert_fadt2 | 
|  | * | 
|  | * PARAMETERS:  local_fadt      - Pointer to new FADT | 
|  | *              original_fadt   - Pointer to old FADT | 
|  | * | 
|  | * RETURN:      None, populates local_fadt | 
|  | * | 
|  | * DESCRIPTION: Convert an ACPI 2.0 FADT to common internal format. | 
|  | *              Handles optional "X" fields. | 
|  | * | 
|  | ******************************************************************************/ | 
|  |  | 
|  | static void | 
|  | acpi_tb_convert_fadt2 ( | 
|  | struct fadt_descriptor_rev2    *local_fadt, | 
|  | struct fadt_descriptor_rev2    *original_fadt) | 
|  | { | 
|  |  | 
|  | /* We have an ACPI 2.0 FADT but we must copy it to our local buffer */ | 
|  |  | 
|  | ACPI_MEMCPY (local_fadt, original_fadt, sizeof (struct fadt_descriptor_rev2)); | 
|  |  | 
|  | /* | 
|  | * "X" fields are optional extensions to the original V1.0 fields, so | 
|  | * we must selectively expand V1.0 fields if the corresponding X field | 
|  | * is zero. | 
|  | */ | 
|  | if (!(local_fadt->xfirmware_ctrl)) { | 
|  | ACPI_STORE_ADDRESS (local_fadt->xfirmware_ctrl, | 
|  | local_fadt->V1_firmware_ctrl); | 
|  | } | 
|  |  | 
|  | if (!(local_fadt->Xdsdt)) { | 
|  | ACPI_STORE_ADDRESS (local_fadt->Xdsdt, local_fadt->V1_dsdt); | 
|  | } | 
|  |  | 
|  | if (!(local_fadt->xpm1a_evt_blk.address)) { | 
|  | acpi_tb_init_generic_address (&local_fadt->xpm1a_evt_blk, | 
|  | local_fadt->pm1_evt_len, | 
|  | (acpi_physical_address) local_fadt->V1_pm1a_evt_blk); | 
|  | } | 
|  |  | 
|  | if (!(local_fadt->xpm1b_evt_blk.address)) { | 
|  | acpi_tb_init_generic_address (&local_fadt->xpm1b_evt_blk, | 
|  | local_fadt->pm1_evt_len, | 
|  | (acpi_physical_address) local_fadt->V1_pm1b_evt_blk); | 
|  | } | 
|  |  | 
|  | if (!(local_fadt->xpm1a_cnt_blk.address)) { | 
|  | acpi_tb_init_generic_address (&local_fadt->xpm1a_cnt_blk, | 
|  | local_fadt->pm1_cnt_len, | 
|  | (acpi_physical_address) local_fadt->V1_pm1a_cnt_blk); | 
|  | } | 
|  |  | 
|  | if (!(local_fadt->xpm1b_cnt_blk.address)) { | 
|  | acpi_tb_init_generic_address (&local_fadt->xpm1b_cnt_blk, | 
|  | local_fadt->pm1_cnt_len, | 
|  | (acpi_physical_address) local_fadt->V1_pm1b_cnt_blk); | 
|  | } | 
|  |  | 
|  | if (!(local_fadt->xpm2_cnt_blk.address)) { | 
|  | acpi_tb_init_generic_address (&local_fadt->xpm2_cnt_blk, | 
|  | local_fadt->pm2_cnt_len, | 
|  | (acpi_physical_address) local_fadt->V1_pm2_cnt_blk); | 
|  | } | 
|  |  | 
|  | if (!(local_fadt->xpm_tmr_blk.address)) { | 
|  | acpi_tb_init_generic_address (&local_fadt->xpm_tmr_blk, | 
|  | local_fadt->pm_tm_len, | 
|  | (acpi_physical_address) local_fadt->V1_pm_tmr_blk); | 
|  | } | 
|  |  | 
|  | if (!(local_fadt->xgpe0_blk.address)) { | 
|  | acpi_tb_init_generic_address (&local_fadt->xgpe0_blk, | 
|  | 0, (acpi_physical_address) local_fadt->V1_gpe0_blk); | 
|  | } | 
|  |  | 
|  | if (!(local_fadt->xgpe1_blk.address)) { | 
|  | acpi_tb_init_generic_address (&local_fadt->xgpe1_blk, | 
|  | 0, (acpi_physical_address) local_fadt->V1_gpe1_blk); | 
|  | } | 
|  |  | 
|  | /* Create separate GAS structs for the PM1 Enable registers */ | 
|  |  | 
|  | acpi_tb_init_generic_address (&acpi_gbl_xpm1a_enable, | 
|  | (u8) ACPI_DIV_2 (acpi_gbl_FADT->pm1_evt_len), | 
|  | (acpi_physical_address) | 
|  | (local_fadt->xpm1a_evt_blk.address + | 
|  | ACPI_DIV_2 (acpi_gbl_FADT->pm1_evt_len))); | 
|  |  | 
|  | acpi_gbl_xpm1a_enable.address_space_id = | 
|  | local_fadt->xpm1a_evt_blk.address_space_id; | 
|  |  | 
|  | /* PM1B is optional; leave null if not present */ | 
|  |  | 
|  | if (local_fadt->xpm1b_evt_blk.address) { | 
|  | acpi_tb_init_generic_address (&acpi_gbl_xpm1b_enable, | 
|  | (u8) ACPI_DIV_2 (acpi_gbl_FADT->pm1_evt_len), | 
|  | (acpi_physical_address) | 
|  | (local_fadt->xpm1b_evt_blk.address + | 
|  | ACPI_DIV_2 (acpi_gbl_FADT->pm1_evt_len))); | 
|  |  | 
|  | acpi_gbl_xpm1b_enable.address_space_id = | 
|  | local_fadt->xpm1b_evt_blk.address_space_id; | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | /******************************************************************************* | 
|  | * | 
|  | * FUNCTION:    acpi_tb_convert_table_fadt | 
|  | * | 
|  | * PARAMETERS:  None | 
|  | * | 
|  | * RETURN:      Status | 
|  | * | 
|  | * DESCRIPTION: Converts a BIOS supplied ACPI 1.0 FADT to a local | 
|  | *              ACPI 2.0 FADT. If the BIOS supplied a 2.0 FADT then it is simply | 
|  | *              copied to the local FADT.  The ACPI CA software uses this | 
|  | *              local FADT. Thus a significant amount of special #ifdef | 
|  | *              type codeing is saved. | 
|  | * | 
|  | ******************************************************************************/ | 
|  |  | 
|  | acpi_status | 
|  | acpi_tb_convert_table_fadt ( | 
|  | void) | 
|  | { | 
|  | struct fadt_descriptor_rev2    *local_fadt; | 
|  | struct acpi_table_desc         *table_desc; | 
|  |  | 
|  |  | 
|  | ACPI_FUNCTION_TRACE ("tb_convert_table_fadt"); | 
|  |  | 
|  |  | 
|  | /* | 
|  | * acpi_gbl_FADT is valid. Validate the FADT length. The table must be | 
|  | * at least as long as the version 1.0 FADT | 
|  | */ | 
|  | if (acpi_gbl_FADT->length < sizeof (struct fadt_descriptor_rev1)) { | 
|  | ACPI_REPORT_ERROR (("FADT is invalid, too short: 0x%X\n", | 
|  | acpi_gbl_FADT->length)); | 
|  | return_ACPI_STATUS (AE_INVALID_TABLE_LENGTH); | 
|  | } | 
|  |  | 
|  | /* Allocate buffer for the ACPI 2.0(+) FADT */ | 
|  |  | 
|  | local_fadt = ACPI_MEM_CALLOCATE (sizeof (struct fadt_descriptor_rev2)); | 
|  | if (!local_fadt) { | 
|  | return_ACPI_STATUS (AE_NO_MEMORY); | 
|  | } | 
|  |  | 
|  | if (acpi_gbl_FADT->revision >= FADT2_REVISION_ID) { | 
|  | if (acpi_gbl_FADT->length < sizeof (struct fadt_descriptor_rev2)) { | 
|  | /* Length is too short to be a V2.0 table */ | 
|  |  | 
|  | ACPI_REPORT_WARNING (( | 
|  | "Inconsistent FADT length (0x%X) and revision (0x%X), using FADT V1.0 portion of table\n", | 
|  | acpi_gbl_FADT->length, acpi_gbl_FADT->revision)); | 
|  |  | 
|  | acpi_tb_convert_fadt1 (local_fadt, (void *) acpi_gbl_FADT); | 
|  | } | 
|  | else { | 
|  | /* Valid V2.0 table */ | 
|  |  | 
|  | acpi_tb_convert_fadt2 (local_fadt, acpi_gbl_FADT); | 
|  | } | 
|  | } | 
|  | else { | 
|  | /* Valid V1.0 table */ | 
|  |  | 
|  | acpi_tb_convert_fadt1 (local_fadt, (void *) acpi_gbl_FADT); | 
|  | } | 
|  |  | 
|  | /* Global FADT pointer will point to the new common V2.0 FADT */ | 
|  |  | 
|  | acpi_gbl_FADT = local_fadt; | 
|  | acpi_gbl_FADT->length = sizeof (FADT_DESCRIPTOR); | 
|  |  | 
|  | /* Free the original table */ | 
|  |  | 
|  | table_desc = acpi_gbl_table_lists[ACPI_TABLE_FADT].next; | 
|  | acpi_tb_delete_single_table (table_desc); | 
|  |  | 
|  | /* Install the new table */ | 
|  |  | 
|  | table_desc->pointer     = ACPI_CAST_PTR (struct acpi_table_header, acpi_gbl_FADT); | 
|  | table_desc->allocation  = ACPI_MEM_ALLOCATED; | 
|  | table_desc->length      = sizeof (struct fadt_descriptor_rev2); | 
|  |  | 
|  | /* Dump the entire FADT */ | 
|  |  | 
|  | ACPI_DEBUG_PRINT ((ACPI_DB_TABLES, | 
|  | "Hex dump of common internal FADT, size %d (%X)\n", | 
|  | acpi_gbl_FADT->length, acpi_gbl_FADT->length)); | 
|  | ACPI_DUMP_BUFFER ((u8 *) (acpi_gbl_FADT), acpi_gbl_FADT->length); | 
|  |  | 
|  | return_ACPI_STATUS (AE_OK); | 
|  | } | 
|  |  | 
|  |  | 
|  | /******************************************************************************* | 
|  | * | 
|  | * FUNCTION:    acpi_tb_build_common_facs | 
|  | * | 
|  | * PARAMETERS:  table_info      - Info for currently installed FACS | 
|  | * | 
|  | * RETURN:      Status | 
|  | * | 
|  | * DESCRIPTION: Convert ACPI 1.0 and ACPI 2.0 FACS to a common internal | 
|  | *              table format. | 
|  | * | 
|  | ******************************************************************************/ | 
|  |  | 
|  | acpi_status | 
|  | acpi_tb_build_common_facs ( | 
|  | struct acpi_table_desc          *table_info) | 
|  | { | 
|  |  | 
|  | ACPI_FUNCTION_TRACE ("tb_build_common_facs"); | 
|  |  | 
|  |  | 
|  | /* Absolute minimum length is 24, but the ACPI spec says 64 */ | 
|  |  | 
|  | if (acpi_gbl_FACS->length < 24) { | 
|  | ACPI_REPORT_ERROR (("Invalid FACS table length: 0x%X\n", | 
|  | acpi_gbl_FACS->length)); | 
|  | return_ACPI_STATUS (AE_INVALID_TABLE_LENGTH); | 
|  | } | 
|  |  | 
|  | if (acpi_gbl_FACS->length < 64) { | 
|  | ACPI_REPORT_WARNING (( | 
|  | "FACS is shorter than the ACPI specification allows: 0x%X, using anyway\n", | 
|  | acpi_gbl_FACS->length)); | 
|  | } | 
|  |  | 
|  | /* Copy fields to the new FACS */ | 
|  |  | 
|  | acpi_gbl_common_fACS.global_lock = &(acpi_gbl_FACS->global_lock); | 
|  |  | 
|  | if ((acpi_gbl_RSDP->revision < 2) || | 
|  | (acpi_gbl_FACS->length < 32) || | 
|  | (!(acpi_gbl_FACS->xfirmware_waking_vector))) { | 
|  | /* ACPI 1.0 FACS or short table or optional X_ field is zero */ | 
|  |  | 
|  | acpi_gbl_common_fACS.firmware_waking_vector = ACPI_CAST_PTR (u64, | 
|  | &(acpi_gbl_FACS->firmware_waking_vector)); | 
|  | acpi_gbl_common_fACS.vector_width = 32; | 
|  | } | 
|  | else { | 
|  | /* ACPI 2.0 FACS with valid X_ field */ | 
|  |  | 
|  | acpi_gbl_common_fACS.firmware_waking_vector = &acpi_gbl_FACS->xfirmware_waking_vector; | 
|  | acpi_gbl_common_fACS.vector_width = 64; | 
|  | } | 
|  |  | 
|  | return_ACPI_STATUS (AE_OK); | 
|  | } | 
|  |  | 
|  |  |