|  | /* | 
|  | * | 
|  | *  Driver for the 3Com Bluetooth PCMCIA card | 
|  | * | 
|  | *  Copyright (C) 2001-2002  Marcel Holtmann <marcel@holtmann.org> | 
|  | *                           Jose Orlando Pereira <jop@di.uminho.pt> | 
|  | * | 
|  | * | 
|  | *  This program is free software; you can redistribute it and/or modify | 
|  | *  it under the terms of the GNU General Public License version 2 as | 
|  | *  published by the Free Software Foundation; | 
|  | * | 
|  | *  Software distributed under the License is distributed on an "AS | 
|  | *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or | 
|  | *  implied. See the License for the specific language governing | 
|  | *  rights and limitations under the License. | 
|  | * | 
|  | *  The initial developer of the original code is David A. Hinds | 
|  | *  <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds | 
|  | *  are Copyright (C) 1999 David A. Hinds.  All Rights Reserved. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/config.h> | 
|  | #include <linux/module.h> | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/ptrace.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/moduleparam.h> | 
|  |  | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/serial.h> | 
|  | #include <linux/serial_reg.h> | 
|  | #include <linux/bitops.h> | 
|  | #include <asm/system.h> | 
|  | #include <asm/io.h> | 
|  |  | 
|  | #include <linux/device.h> | 
|  | #include <linux/firmware.h> | 
|  |  | 
|  | #include <pcmcia/cs_types.h> | 
|  | #include <pcmcia/cs.h> | 
|  | #include <pcmcia/cistpl.h> | 
|  | #include <pcmcia/ciscode.h> | 
|  | #include <pcmcia/ds.h> | 
|  | #include <pcmcia/cisreg.h> | 
|  |  | 
|  | #include <net/bluetooth/bluetooth.h> | 
|  | #include <net/bluetooth/hci_core.h> | 
|  |  | 
|  |  | 
|  |  | 
|  | /* ======================== Module parameters ======================== */ | 
|  |  | 
|  |  | 
|  | MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>, Jose Orlando Pereira <jop@di.uminho.pt>"); | 
|  | MODULE_DESCRIPTION("Bluetooth driver for the 3Com Bluetooth PCMCIA card"); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  | 
|  |  | 
|  |  | 
|  | /* ======================== Local structures ======================== */ | 
|  |  | 
|  |  | 
|  | typedef struct bt3c_info_t { | 
|  | dev_link_t link; | 
|  | dev_node_t node; | 
|  |  | 
|  | struct hci_dev *hdev; | 
|  |  | 
|  | spinlock_t lock;		/* For serializing operations */ | 
|  |  | 
|  | struct sk_buff_head txq; | 
|  | unsigned long tx_state; | 
|  |  | 
|  | unsigned long rx_state; | 
|  | unsigned long rx_count; | 
|  | struct sk_buff *rx_skb; | 
|  | } bt3c_info_t; | 
|  |  | 
|  |  | 
|  | static void bt3c_config(dev_link_t *link); | 
|  | static void bt3c_release(dev_link_t *link); | 
|  | static int bt3c_event(event_t event, int priority, event_callback_args_t *args); | 
|  |  | 
|  | static dev_info_t dev_info = "bt3c_cs"; | 
|  |  | 
|  | static dev_link_t *bt3c_attach(void); | 
|  | static void bt3c_detach(dev_link_t *); | 
|  |  | 
|  | static dev_link_t *dev_list = NULL; | 
|  |  | 
|  |  | 
|  | /* Transmit states  */ | 
|  | #define XMIT_SENDING  1 | 
|  | #define XMIT_WAKEUP   2 | 
|  | #define XMIT_WAITING  8 | 
|  |  | 
|  | /* Receiver states */ | 
|  | #define RECV_WAIT_PACKET_TYPE   0 | 
|  | #define RECV_WAIT_EVENT_HEADER  1 | 
|  | #define RECV_WAIT_ACL_HEADER    2 | 
|  | #define RECV_WAIT_SCO_HEADER    3 | 
|  | #define RECV_WAIT_DATA          4 | 
|  |  | 
|  |  | 
|  |  | 
|  | /* ======================== Special I/O functions ======================== */ | 
|  |  | 
|  |  | 
|  | #define DATA_L   0 | 
|  | #define DATA_H   1 | 
|  | #define ADDR_L   2 | 
|  | #define ADDR_H   3 | 
|  | #define CONTROL  4 | 
|  |  | 
|  |  | 
|  | static inline void bt3c_address(unsigned int iobase, unsigned short addr) | 
|  | { | 
|  | outb(addr & 0xff, iobase + ADDR_L); | 
|  | outb((addr >> 8) & 0xff, iobase + ADDR_H); | 
|  | } | 
|  |  | 
|  |  | 
|  | static inline void bt3c_put(unsigned int iobase, unsigned short value) | 
|  | { | 
|  | outb(value & 0xff, iobase + DATA_L); | 
|  | outb((value >> 8) & 0xff, iobase + DATA_H); | 
|  | } | 
|  |  | 
|  |  | 
|  | static inline void bt3c_io_write(unsigned int iobase, unsigned short addr, unsigned short value) | 
|  | { | 
|  | bt3c_address(iobase, addr); | 
|  | bt3c_put(iobase, value); | 
|  | } | 
|  |  | 
|  |  | 
|  | static inline unsigned short bt3c_get(unsigned int iobase) | 
|  | { | 
|  | unsigned short value = inb(iobase + DATA_L); | 
|  |  | 
|  | value |= inb(iobase + DATA_H) << 8; | 
|  |  | 
|  | return value; | 
|  | } | 
|  |  | 
|  |  | 
|  | static inline unsigned short bt3c_read(unsigned int iobase, unsigned short addr) | 
|  | { | 
|  | bt3c_address(iobase, addr); | 
|  |  | 
|  | return bt3c_get(iobase); | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | /* ======================== Interrupt handling ======================== */ | 
|  |  | 
|  |  | 
|  | static int bt3c_write(unsigned int iobase, int fifo_size, __u8 *buf, int len) | 
|  | { | 
|  | int actual = 0; | 
|  |  | 
|  | bt3c_address(iobase, 0x7080); | 
|  |  | 
|  | /* Fill FIFO with current frame */ | 
|  | while (actual < len) { | 
|  | /* Transmit next byte */ | 
|  | bt3c_put(iobase, buf[actual]); | 
|  | actual++; | 
|  | } | 
|  |  | 
|  | bt3c_io_write(iobase, 0x7005, actual); | 
|  |  | 
|  | return actual; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void bt3c_write_wakeup(bt3c_info_t *info) | 
|  | { | 
|  | if (!info) { | 
|  | BT_ERR("Unknown device"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (test_and_set_bit(XMIT_SENDING, &(info->tx_state))) | 
|  | return; | 
|  |  | 
|  | do { | 
|  | register unsigned int iobase = info->link.io.BasePort1; | 
|  | register struct sk_buff *skb; | 
|  | register int len; | 
|  |  | 
|  | if (!(info->link.state & DEV_PRESENT)) | 
|  | break; | 
|  |  | 
|  |  | 
|  | if (!(skb = skb_dequeue(&(info->txq)))) { | 
|  | clear_bit(XMIT_SENDING, &(info->tx_state)); | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* Send frame */ | 
|  | len = bt3c_write(iobase, 256, skb->data, skb->len); | 
|  |  | 
|  | if (len != skb->len) { | 
|  | BT_ERR("Very strange"); | 
|  | } | 
|  |  | 
|  | kfree_skb(skb); | 
|  |  | 
|  | info->hdev->stat.byte_tx += len; | 
|  |  | 
|  | } while (0); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void bt3c_receive(bt3c_info_t *info) | 
|  | { | 
|  | unsigned int iobase; | 
|  | int size = 0, avail; | 
|  |  | 
|  | if (!info) { | 
|  | BT_ERR("Unknown device"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | iobase = info->link.io.BasePort1; | 
|  |  | 
|  | avail = bt3c_read(iobase, 0x7006); | 
|  | //printk("bt3c_cs: receiving %d bytes\n", avail); | 
|  |  | 
|  | bt3c_address(iobase, 0x7480); | 
|  | while (size < avail) { | 
|  | size++; | 
|  | info->hdev->stat.byte_rx++; | 
|  |  | 
|  | /* Allocate packet */ | 
|  | if (info->rx_skb == NULL) { | 
|  | info->rx_state = RECV_WAIT_PACKET_TYPE; | 
|  | info->rx_count = 0; | 
|  | if (!(info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC))) { | 
|  | BT_ERR("Can't allocate mem for new packet"); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | if (info->rx_state == RECV_WAIT_PACKET_TYPE) { | 
|  |  | 
|  | info->rx_skb->dev = (void *) info->hdev; | 
|  | info->rx_skb->pkt_type = inb(iobase + DATA_L); | 
|  | inb(iobase + DATA_H); | 
|  | //printk("bt3c: PACKET_TYPE=%02x\n", info->rx_skb->pkt_type); | 
|  |  | 
|  | switch (info->rx_skb->pkt_type) { | 
|  |  | 
|  | case HCI_EVENT_PKT: | 
|  | info->rx_state = RECV_WAIT_EVENT_HEADER; | 
|  | info->rx_count = HCI_EVENT_HDR_SIZE; | 
|  | break; | 
|  |  | 
|  | case HCI_ACLDATA_PKT: | 
|  | info->rx_state = RECV_WAIT_ACL_HEADER; | 
|  | info->rx_count = HCI_ACL_HDR_SIZE; | 
|  | break; | 
|  |  | 
|  | case HCI_SCODATA_PKT: | 
|  | info->rx_state = RECV_WAIT_SCO_HEADER; | 
|  | info->rx_count = HCI_SCO_HDR_SIZE; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | /* Unknown packet */ | 
|  | BT_ERR("Unknown HCI packet with type 0x%02x received", info->rx_skb->pkt_type); | 
|  | info->hdev->stat.err_rx++; | 
|  | clear_bit(HCI_RUNNING, &(info->hdev->flags)); | 
|  |  | 
|  | kfree_skb(info->rx_skb); | 
|  | info->rx_skb = NULL; | 
|  | break; | 
|  |  | 
|  | } | 
|  |  | 
|  | } else { | 
|  |  | 
|  | __u8 x = inb(iobase + DATA_L); | 
|  |  | 
|  | *skb_put(info->rx_skb, 1) = x; | 
|  | inb(iobase + DATA_H); | 
|  | info->rx_count--; | 
|  |  | 
|  | if (info->rx_count == 0) { | 
|  |  | 
|  | int dlen; | 
|  | struct hci_event_hdr *eh; | 
|  | struct hci_acl_hdr *ah; | 
|  | struct hci_sco_hdr *sh; | 
|  |  | 
|  | switch (info->rx_state) { | 
|  |  | 
|  | case RECV_WAIT_EVENT_HEADER: | 
|  | eh = (struct hci_event_hdr *)(info->rx_skb->data); | 
|  | info->rx_state = RECV_WAIT_DATA; | 
|  | info->rx_count = eh->plen; | 
|  | break; | 
|  |  | 
|  | case RECV_WAIT_ACL_HEADER: | 
|  | ah = (struct hci_acl_hdr *)(info->rx_skb->data); | 
|  | dlen = __le16_to_cpu(ah->dlen); | 
|  | info->rx_state = RECV_WAIT_DATA; | 
|  | info->rx_count = dlen; | 
|  | break; | 
|  |  | 
|  | case RECV_WAIT_SCO_HEADER: | 
|  | sh = (struct hci_sco_hdr *)(info->rx_skb->data); | 
|  | info->rx_state = RECV_WAIT_DATA; | 
|  | info->rx_count = sh->dlen; | 
|  | break; | 
|  |  | 
|  | case RECV_WAIT_DATA: | 
|  | hci_recv_frame(info->rx_skb); | 
|  | info->rx_skb = NULL; | 
|  | break; | 
|  |  | 
|  | } | 
|  |  | 
|  | } | 
|  |  | 
|  | } | 
|  |  | 
|  | } | 
|  |  | 
|  | bt3c_io_write(iobase, 0x7006, 0x0000); | 
|  | } | 
|  |  | 
|  |  | 
|  | static irqreturn_t bt3c_interrupt(int irq, void *dev_inst, struct pt_regs *regs) | 
|  | { | 
|  | bt3c_info_t *info = dev_inst; | 
|  | unsigned int iobase; | 
|  | int iir; | 
|  |  | 
|  | if (!info || !info->hdev) { | 
|  | BT_ERR("Call of irq %d for unknown device", irq); | 
|  | return IRQ_NONE; | 
|  | } | 
|  |  | 
|  | iobase = info->link.io.BasePort1; | 
|  |  | 
|  | spin_lock(&(info->lock)); | 
|  |  | 
|  | iir = inb(iobase + CONTROL); | 
|  | if (iir & 0x80) { | 
|  | int stat = bt3c_read(iobase, 0x7001); | 
|  |  | 
|  | if ((stat & 0xff) == 0x7f) { | 
|  | BT_ERR("Very strange (stat=0x%04x)", stat); | 
|  | } else if ((stat & 0xff) != 0xff) { | 
|  | if (stat & 0x0020) { | 
|  | int stat = bt3c_read(iobase, 0x7002) & 0x10; | 
|  | BT_INFO("%s: Antenna %s", info->hdev->name, | 
|  | stat ? "out" : "in"); | 
|  | } | 
|  | if (stat & 0x0001) | 
|  | bt3c_receive(info); | 
|  | if (stat & 0x0002) { | 
|  | //BT_ERR("Ack (stat=0x%04x)", stat); | 
|  | clear_bit(XMIT_SENDING, &(info->tx_state)); | 
|  | bt3c_write_wakeup(info); | 
|  | } | 
|  |  | 
|  | bt3c_io_write(iobase, 0x7001, 0x0000); | 
|  |  | 
|  | outb(iir, iobase + CONTROL); | 
|  | } | 
|  | } | 
|  |  | 
|  | spin_unlock(&(info->lock)); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | /* ======================== HCI interface ======================== */ | 
|  |  | 
|  |  | 
|  | static int bt3c_hci_flush(struct hci_dev *hdev) | 
|  | { | 
|  | bt3c_info_t *info = (bt3c_info_t *)(hdev->driver_data); | 
|  |  | 
|  | /* Drop TX queue */ | 
|  | skb_queue_purge(&(info->txq)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int bt3c_hci_open(struct hci_dev *hdev) | 
|  | { | 
|  | set_bit(HCI_RUNNING, &(hdev->flags)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int bt3c_hci_close(struct hci_dev *hdev) | 
|  | { | 
|  | if (!test_and_clear_bit(HCI_RUNNING, &(hdev->flags))) | 
|  | return 0; | 
|  |  | 
|  | bt3c_hci_flush(hdev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int bt3c_hci_send_frame(struct sk_buff *skb) | 
|  | { | 
|  | bt3c_info_t *info; | 
|  | struct hci_dev *hdev = (struct hci_dev *)(skb->dev); | 
|  | unsigned long flags; | 
|  |  | 
|  | if (!hdev) { | 
|  | BT_ERR("Frame for unknown HCI device (hdev=NULL)"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | info = (bt3c_info_t *) (hdev->driver_data); | 
|  |  | 
|  | switch (skb->pkt_type) { | 
|  | case HCI_COMMAND_PKT: | 
|  | hdev->stat.cmd_tx++; | 
|  | break; | 
|  | case HCI_ACLDATA_PKT: | 
|  | hdev->stat.acl_tx++; | 
|  | break; | 
|  | case HCI_SCODATA_PKT: | 
|  | hdev->stat.sco_tx++; | 
|  | break; | 
|  | }; | 
|  |  | 
|  | /* Prepend skb with frame type */ | 
|  | memcpy(skb_push(skb, 1), &(skb->pkt_type), 1); | 
|  | skb_queue_tail(&(info->txq), skb); | 
|  |  | 
|  | spin_lock_irqsave(&(info->lock), flags); | 
|  |  | 
|  | bt3c_write_wakeup(info); | 
|  |  | 
|  | spin_unlock_irqrestore(&(info->lock), flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void bt3c_hci_destruct(struct hci_dev *hdev) | 
|  | { | 
|  | } | 
|  |  | 
|  |  | 
|  | static int bt3c_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned long arg) | 
|  | { | 
|  | return -ENOIOCTLCMD; | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | /* ======================== Card services HCI interaction ======================== */ | 
|  |  | 
|  |  | 
|  | static struct device *bt3c_device(void) | 
|  | { | 
|  | static struct device dev = { | 
|  | .bus_id = "pcmcia", | 
|  | }; | 
|  | kobject_set_name(&dev.kobj, "bt3c"); | 
|  | kobject_init(&dev.kobj); | 
|  |  | 
|  | return &dev; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int bt3c_load_firmware(bt3c_info_t *info, unsigned char *firmware, int count) | 
|  | { | 
|  | char *ptr = (char *) firmware; | 
|  | char b[9]; | 
|  | unsigned int iobase, size, addr, fcs, tmp; | 
|  | int i, err = 0; | 
|  |  | 
|  | iobase = info->link.io.BasePort1; | 
|  |  | 
|  | /* Reset */ | 
|  | bt3c_io_write(iobase, 0x8040, 0x0404); | 
|  | bt3c_io_write(iobase, 0x8040, 0x0400); | 
|  |  | 
|  | udelay(1); | 
|  |  | 
|  | bt3c_io_write(iobase, 0x8040, 0x0404); | 
|  |  | 
|  | udelay(17); | 
|  |  | 
|  | /* Load */ | 
|  | while (count) { | 
|  | if (ptr[0] != 'S') { | 
|  | BT_ERR("Bad address in firmware"); | 
|  | err = -EFAULT; | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | memset(b, 0, sizeof(b)); | 
|  | memcpy(b, ptr + 2, 2); | 
|  | size = simple_strtol(b, NULL, 16); | 
|  |  | 
|  | memset(b, 0, sizeof(b)); | 
|  | memcpy(b, ptr + 4, 8); | 
|  | addr = simple_strtol(b, NULL, 16); | 
|  |  | 
|  | memset(b, 0, sizeof(b)); | 
|  | memcpy(b, ptr + (size * 2) + 2, 2); | 
|  | fcs = simple_strtol(b, NULL, 16); | 
|  |  | 
|  | memset(b, 0, sizeof(b)); | 
|  | for (tmp = 0, i = 0; i < size; i++) { | 
|  | memcpy(b, ptr + (i * 2) + 2, 2); | 
|  | tmp += simple_strtol(b, NULL, 16); | 
|  | } | 
|  |  | 
|  | if (((tmp + fcs) & 0xff) != 0xff) { | 
|  | BT_ERR("Checksum error in firmware"); | 
|  | err = -EILSEQ; | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | if (ptr[1] == '3') { | 
|  | bt3c_address(iobase, addr); | 
|  |  | 
|  | memset(b, 0, sizeof(b)); | 
|  | for (i = 0; i < (size - 4) / 2; i++) { | 
|  | memcpy(b, ptr + (i * 4) + 12, 4); | 
|  | tmp = simple_strtol(b, NULL, 16); | 
|  | bt3c_put(iobase, tmp); | 
|  | } | 
|  | } | 
|  |  | 
|  | ptr   += (size * 2) + 6; | 
|  | count -= (size * 2) + 6; | 
|  | } | 
|  |  | 
|  | udelay(17); | 
|  |  | 
|  | /* Boot */ | 
|  | bt3c_address(iobase, 0x3000); | 
|  | outb(inb(iobase + CONTROL) | 0x40, iobase + CONTROL); | 
|  |  | 
|  | error: | 
|  | udelay(17); | 
|  |  | 
|  | /* Clear */ | 
|  | bt3c_io_write(iobase, 0x7006, 0x0000); | 
|  | bt3c_io_write(iobase, 0x7005, 0x0000); | 
|  | bt3c_io_write(iobase, 0x7001, 0x0000); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int bt3c_open(bt3c_info_t *info) | 
|  | { | 
|  | const struct firmware *firmware; | 
|  | struct hci_dev *hdev; | 
|  | int err; | 
|  |  | 
|  | spin_lock_init(&(info->lock)); | 
|  |  | 
|  | skb_queue_head_init(&(info->txq)); | 
|  |  | 
|  | info->rx_state = RECV_WAIT_PACKET_TYPE; | 
|  | info->rx_count = 0; | 
|  | info->rx_skb = NULL; | 
|  |  | 
|  | /* Initialize HCI device */ | 
|  | hdev = hci_alloc_dev(); | 
|  | if (!hdev) { | 
|  | BT_ERR("Can't allocate HCI device"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | info->hdev = hdev; | 
|  |  | 
|  | hdev->type = HCI_PCCARD; | 
|  | hdev->driver_data = info; | 
|  |  | 
|  | hdev->open     = bt3c_hci_open; | 
|  | hdev->close    = bt3c_hci_close; | 
|  | hdev->flush    = bt3c_hci_flush; | 
|  | hdev->send     = bt3c_hci_send_frame; | 
|  | hdev->destruct = bt3c_hci_destruct; | 
|  | hdev->ioctl    = bt3c_hci_ioctl; | 
|  |  | 
|  | hdev->owner = THIS_MODULE; | 
|  |  | 
|  | /* Load firmware */ | 
|  | err = request_firmware(&firmware, "BT3CPCC.bin", bt3c_device()); | 
|  | if (err < 0) { | 
|  | BT_ERR("Firmware request failed"); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | err = bt3c_load_firmware(info, firmware->data, firmware->size); | 
|  |  | 
|  | release_firmware(firmware); | 
|  |  | 
|  | if (err < 0) { | 
|  | BT_ERR("Firmware loading failed"); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | /* Timeout before it is safe to send the first HCI packet */ | 
|  | msleep(1000); | 
|  |  | 
|  | /* Register HCI device */ | 
|  | err = hci_register_dev(hdev); | 
|  | if (err < 0) { | 
|  | BT_ERR("Can't register HCI device"); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | error: | 
|  | info->hdev = NULL; | 
|  | hci_free_dev(hdev); | 
|  | return err; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int bt3c_close(bt3c_info_t *info) | 
|  | { | 
|  | struct hci_dev *hdev = info->hdev; | 
|  |  | 
|  | if (!hdev) | 
|  | return -ENODEV; | 
|  |  | 
|  | bt3c_hci_close(hdev); | 
|  |  | 
|  | if (hci_unregister_dev(hdev) < 0) | 
|  | BT_ERR("Can't unregister HCI device %s", hdev->name); | 
|  |  | 
|  | hci_free_dev(hdev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static dev_link_t *bt3c_attach(void) | 
|  | { | 
|  | bt3c_info_t *info; | 
|  | client_reg_t client_reg; | 
|  | dev_link_t *link; | 
|  | int ret; | 
|  |  | 
|  | /* Create new info device */ | 
|  | info = kmalloc(sizeof(*info), GFP_KERNEL); | 
|  | if (!info) | 
|  | return NULL; | 
|  | memset(info, 0, sizeof(*info)); | 
|  |  | 
|  | link = &info->link; | 
|  | link->priv = info; | 
|  |  | 
|  | link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; | 
|  | link->io.NumPorts1 = 8; | 
|  | link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; | 
|  | link->irq.IRQInfo1 = IRQ_LEVEL_ID; | 
|  |  | 
|  | link->irq.Handler = bt3c_interrupt; | 
|  | link->irq.Instance = info; | 
|  |  | 
|  | link->conf.Attributes = CONF_ENABLE_IRQ; | 
|  | link->conf.Vcc = 50; | 
|  | link->conf.IntType = INT_MEMORY_AND_IO; | 
|  |  | 
|  | /* Register with Card Services */ | 
|  | link->next = dev_list; | 
|  | dev_list = link; | 
|  | client_reg.dev_info = &dev_info; | 
|  | client_reg.Version = 0x0210; | 
|  | client_reg.event_callback_args.client_data = link; | 
|  |  | 
|  | ret = pcmcia_register_client(&link->handle, &client_reg); | 
|  | if (ret != CS_SUCCESS) { | 
|  | cs_error(link->handle, RegisterClient, ret); | 
|  | bt3c_detach(link); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | return link; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void bt3c_detach(dev_link_t *link) | 
|  | { | 
|  | bt3c_info_t *info = link->priv; | 
|  | dev_link_t **linkp; | 
|  | int ret; | 
|  |  | 
|  | /* Locate device structure */ | 
|  | for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next) | 
|  | if (*linkp == link) | 
|  | break; | 
|  |  | 
|  | if (*linkp == NULL) | 
|  | return; | 
|  |  | 
|  | if (link->state & DEV_CONFIG) | 
|  | bt3c_release(link); | 
|  |  | 
|  | if (link->handle) { | 
|  | ret = pcmcia_deregister_client(link->handle); | 
|  | if (ret != CS_SUCCESS) | 
|  | cs_error(link->handle, DeregisterClient, ret); | 
|  | } | 
|  |  | 
|  | /* Unlink device structure, free bits */ | 
|  | *linkp = link->next; | 
|  |  | 
|  | kfree(info); | 
|  | } | 
|  |  | 
|  | static int get_tuple(client_handle_t handle, tuple_t *tuple, cisparse_t *parse) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | i = pcmcia_get_tuple_data(handle, tuple); | 
|  | if (i != CS_SUCCESS) | 
|  | return i; | 
|  |  | 
|  | return pcmcia_parse_tuple(handle, tuple, parse); | 
|  | } | 
|  |  | 
|  | static int first_tuple(client_handle_t handle, tuple_t *tuple, cisparse_t *parse) | 
|  | { | 
|  | if (pcmcia_get_first_tuple(handle, tuple) != CS_SUCCESS) | 
|  | return CS_NO_MORE_ITEMS; | 
|  | return get_tuple(handle, tuple, parse); | 
|  | } | 
|  |  | 
|  | static int next_tuple(client_handle_t handle, tuple_t *tuple, cisparse_t *parse) | 
|  | { | 
|  | if (pcmcia_get_next_tuple(handle, tuple) != CS_SUCCESS) | 
|  | return CS_NO_MORE_ITEMS; | 
|  | return get_tuple(handle, tuple, parse); | 
|  | } | 
|  |  | 
|  | static void bt3c_config(dev_link_t *link) | 
|  | { | 
|  | static kio_addr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; | 
|  | client_handle_t handle = link->handle; | 
|  | bt3c_info_t *info = link->priv; | 
|  | tuple_t tuple; | 
|  | u_short buf[256]; | 
|  | cisparse_t parse; | 
|  | cistpl_cftable_entry_t *cf = &parse.cftable_entry; | 
|  | config_info_t config; | 
|  | int i, j, try, last_ret, last_fn; | 
|  |  | 
|  | tuple.TupleData = (cisdata_t *)buf; | 
|  | tuple.TupleOffset = 0; | 
|  | tuple.TupleDataMax = 255; | 
|  | tuple.Attributes = 0; | 
|  |  | 
|  | /* Get configuration register information */ | 
|  | tuple.DesiredTuple = CISTPL_CONFIG; | 
|  | last_ret = first_tuple(handle, &tuple, &parse); | 
|  | if (last_ret != CS_SUCCESS) { | 
|  | last_fn = ParseTuple; | 
|  | goto cs_failed; | 
|  | } | 
|  | link->conf.ConfigBase = parse.config.base; | 
|  | link->conf.Present = parse.config.rmask[0]; | 
|  |  | 
|  | /* Configure card */ | 
|  | link->state |= DEV_CONFIG; | 
|  | i = pcmcia_get_configuration_info(handle, &config); | 
|  | link->conf.Vcc = config.Vcc; | 
|  |  | 
|  | /* First pass: look for a config entry that looks normal. */ | 
|  | tuple.TupleData = (cisdata_t *)buf; | 
|  | tuple.TupleOffset = 0; | 
|  | tuple.TupleDataMax = 255; | 
|  | tuple.Attributes = 0; | 
|  | tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; | 
|  | /* Two tries: without IO aliases, then with aliases */ | 
|  | for (try = 0; try < 2; try++) { | 
|  | i = first_tuple(handle, &tuple, &parse); | 
|  | while (i != CS_NO_MORE_ITEMS) { | 
|  | if (i != CS_SUCCESS) | 
|  | goto next_entry; | 
|  | if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) | 
|  | link->conf.Vpp1 = link->conf.Vpp2 = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; | 
|  | if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) { | 
|  | link->conf.ConfigIndex = cf->index; | 
|  | link->io.BasePort1 = cf->io.win[0].base; | 
|  | link->io.IOAddrLines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK; | 
|  | i = pcmcia_request_io(link->handle, &link->io); | 
|  | if (i == CS_SUCCESS) | 
|  | goto found_port; | 
|  | } | 
|  | next_entry: | 
|  | i = next_tuple(handle, &tuple, &parse); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Second pass: try to find an entry that isn't picky about | 
|  | its base address, then try to grab any standard serial port | 
|  | address, and finally try to get any free port. */ | 
|  | i = first_tuple(handle, &tuple, &parse); | 
|  | while (i != CS_NO_MORE_ITEMS) { | 
|  | if ((i == CS_SUCCESS) && (cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { | 
|  | link->conf.ConfigIndex = cf->index; | 
|  | for (j = 0; j < 5; j++) { | 
|  | link->io.BasePort1 = base[j]; | 
|  | link->io.IOAddrLines = base[j] ? 16 : 3; | 
|  | i = pcmcia_request_io(link->handle, &link->io); | 
|  | if (i == CS_SUCCESS) | 
|  | goto found_port; | 
|  | } | 
|  | } | 
|  | i = next_tuple(handle, &tuple, &parse); | 
|  | } | 
|  |  | 
|  | found_port: | 
|  | if (i != CS_SUCCESS) { | 
|  | BT_ERR("No usable port range found"); | 
|  | cs_error(link->handle, RequestIO, i); | 
|  | goto failed; | 
|  | } | 
|  |  | 
|  | i = pcmcia_request_irq(link->handle, &link->irq); | 
|  | if (i != CS_SUCCESS) { | 
|  | cs_error(link->handle, RequestIRQ, i); | 
|  | link->irq.AssignedIRQ = 0; | 
|  | } | 
|  |  | 
|  | i = pcmcia_request_configuration(link->handle, &link->conf); | 
|  | if (i != CS_SUCCESS) { | 
|  | cs_error(link->handle, RequestConfiguration, i); | 
|  | goto failed; | 
|  | } | 
|  |  | 
|  | if (bt3c_open(info) != 0) | 
|  | goto failed; | 
|  |  | 
|  | strcpy(info->node.dev_name, info->hdev->name); | 
|  | link->dev = &info->node; | 
|  | link->state &= ~DEV_CONFIG_PENDING; | 
|  |  | 
|  | return; | 
|  |  | 
|  | cs_failed: | 
|  | cs_error(link->handle, last_fn, last_ret); | 
|  |  | 
|  | failed: | 
|  | bt3c_release(link); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void bt3c_release(dev_link_t *link) | 
|  | { | 
|  | bt3c_info_t *info = link->priv; | 
|  |  | 
|  | if (link->state & DEV_PRESENT) | 
|  | bt3c_close(info); | 
|  |  | 
|  | link->dev = NULL; | 
|  |  | 
|  | pcmcia_release_configuration(link->handle); | 
|  | pcmcia_release_io(link->handle, &link->io); | 
|  | pcmcia_release_irq(link->handle, &link->irq); | 
|  |  | 
|  | link->state &= ~DEV_CONFIG; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int bt3c_event(event_t event, int priority, event_callback_args_t *args) | 
|  | { | 
|  | dev_link_t *link = args->client_data; | 
|  | bt3c_info_t *info = link->priv; | 
|  |  | 
|  | switch (event) { | 
|  | case CS_EVENT_CARD_REMOVAL: | 
|  | link->state &= ~DEV_PRESENT; | 
|  | if (link->state & DEV_CONFIG) { | 
|  | bt3c_close(info); | 
|  | bt3c_release(link); | 
|  | } | 
|  | break; | 
|  | case CS_EVENT_CARD_INSERTION: | 
|  | link->state |= DEV_PRESENT | DEV_CONFIG_PENDING; | 
|  | bt3c_config(link); | 
|  | break; | 
|  | case CS_EVENT_PM_SUSPEND: | 
|  | link->state |= DEV_SUSPEND; | 
|  | /* Fall through... */ | 
|  | case CS_EVENT_RESET_PHYSICAL: | 
|  | if (link->state & DEV_CONFIG) | 
|  | pcmcia_release_configuration(link->handle); | 
|  | break; | 
|  | case CS_EVENT_PM_RESUME: | 
|  | link->state &= ~DEV_SUSPEND; | 
|  | /* Fall through... */ | 
|  | case CS_EVENT_CARD_RESET: | 
|  | if (DEV_OK(link)) | 
|  | pcmcia_request_configuration(link->handle, &link->conf); | 
|  | break; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct pcmcia_device_id bt3c_ids[] = { | 
|  | PCMCIA_DEVICE_PROD_ID13("3COM", "Bluetooth PC Card", 0xefce0a31, 0xd4ce9b02), | 
|  | PCMCIA_DEVICE_NULL | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(pcmcia, bt3c_ids); | 
|  |  | 
|  | static struct pcmcia_driver bt3c_driver = { | 
|  | .owner		= THIS_MODULE, | 
|  | .drv		= { | 
|  | .name	= "bt3c_cs", | 
|  | }, | 
|  | .attach		= bt3c_attach, | 
|  | .event		= bt3c_event, | 
|  | .detach		= bt3c_detach, | 
|  | .id_table	= bt3c_ids, | 
|  | }; | 
|  |  | 
|  | static int __init init_bt3c_cs(void) | 
|  | { | 
|  | return pcmcia_register_driver(&bt3c_driver); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void __exit exit_bt3c_cs(void) | 
|  | { | 
|  | pcmcia_unregister_driver(&bt3c_driver); | 
|  | BUG_ON(dev_list != NULL); | 
|  | } | 
|  |  | 
|  | module_init(init_bt3c_cs); | 
|  | module_exit(exit_bt3c_cs); |