|  | /* | 
|  | * I/O Processor (IOP) ADB Driver | 
|  | * Written and (C) 1999 by Joshua M. Thompson (funaho@jurai.org) | 
|  | * Based on via-cuda.c by Paul Mackerras. | 
|  | * | 
|  | * 1999-07-01 (jmt) - First implementation for new driver architecture. | 
|  | * | 
|  | * 1999-07-31 (jmt) - First working version. | 
|  | * | 
|  | * TODO: | 
|  | * | 
|  | * o Implement SRQ handling. | 
|  | */ | 
|  |  | 
|  | #include <linux/types.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/proc_fs.h> | 
|  |  | 
|  | #include <asm/bootinfo.h> | 
|  | #include <asm/macintosh.h> | 
|  | #include <asm/macints.h> | 
|  | #include <asm/mac_iop.h> | 
|  | #include <asm/mac_oss.h> | 
|  | #include <asm/adb_iop.h> | 
|  |  | 
|  | #include <linux/adb.h> | 
|  |  | 
|  | /*#define DEBUG_ADB_IOP*/ | 
|  |  | 
|  | extern void iop_ism_irq(int, void *, struct pt_regs *); | 
|  |  | 
|  | static struct adb_request *current_req; | 
|  | static struct adb_request *last_req; | 
|  | #if 0 | 
|  | static unsigned char reply_buff[16]; | 
|  | static unsigned char *reply_ptr; | 
|  | #endif | 
|  |  | 
|  | static enum adb_iop_state { | 
|  | idle, | 
|  | sending, | 
|  | awaiting_reply | 
|  | } adb_iop_state; | 
|  |  | 
|  | static void adb_iop_start(void); | 
|  | static int adb_iop_probe(void); | 
|  | static int adb_iop_init(void); | 
|  | static int adb_iop_send_request(struct adb_request *, int); | 
|  | static int adb_iop_write(struct adb_request *); | 
|  | static int adb_iop_autopoll(int); | 
|  | static void adb_iop_poll(void); | 
|  | static int adb_iop_reset_bus(void); | 
|  |  | 
|  | struct adb_driver adb_iop_driver = { | 
|  | "ISM IOP", | 
|  | adb_iop_probe, | 
|  | adb_iop_init, | 
|  | adb_iop_send_request, | 
|  | adb_iop_autopoll, | 
|  | adb_iop_poll, | 
|  | adb_iop_reset_bus | 
|  | }; | 
|  |  | 
|  | static void adb_iop_end_req(struct adb_request *req, int state) | 
|  | { | 
|  | req->complete = 1; | 
|  | current_req = req->next; | 
|  | if (req->done) (*req->done)(req); | 
|  | adb_iop_state = state; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Completion routine for ADB commands sent to the IOP. | 
|  | * | 
|  | * This will be called when a packet has been successfully sent. | 
|  | */ | 
|  |  | 
|  | static void adb_iop_complete(struct iop_msg *msg, struct pt_regs *regs) | 
|  | { | 
|  | struct adb_request *req; | 
|  | uint flags; | 
|  |  | 
|  | local_irq_save(flags); | 
|  |  | 
|  | req = current_req; | 
|  | if ((adb_iop_state == sending) && req && req->reply_expected) { | 
|  | adb_iop_state = awaiting_reply; | 
|  | } | 
|  |  | 
|  | local_irq_restore(flags); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Listen for ADB messages from the IOP. | 
|  | * | 
|  | * This will be called when unsolicited messages (usually replies to TALK | 
|  | * commands or autopoll packets) are received. | 
|  | */ | 
|  |  | 
|  | static void adb_iop_listen(struct iop_msg *msg, struct pt_regs *regs) | 
|  | { | 
|  | struct adb_iopmsg *amsg = (struct adb_iopmsg *) msg->message; | 
|  | struct adb_request *req; | 
|  | uint flags; | 
|  | #ifdef DEBUG_ADB_IOP | 
|  | int i; | 
|  | #endif | 
|  |  | 
|  | local_irq_save(flags); | 
|  |  | 
|  | req = current_req; | 
|  |  | 
|  | #ifdef DEBUG_ADB_IOP | 
|  | printk("adb_iop_listen %p: rcvd packet, %d bytes: %02X %02X", req, | 
|  | (uint) amsg->count + 2, (uint) amsg->flags, (uint) amsg->cmd); | 
|  | for (i = 0; i < amsg->count; i++) | 
|  | printk(" %02X", (uint) amsg->data[i]); | 
|  | printk("\n"); | 
|  | #endif | 
|  |  | 
|  | /* Handle a timeout. Timeout packets seem to occur even after */ | 
|  | /* we've gotten a valid reply to a TALK, so I'm assuming that */ | 
|  | /* a "timeout" is actually more like an "end-of-data" signal. */ | 
|  | /* We need to send back a timeout packet to the IOP to shut   */ | 
|  | /* it up, plus complete the current request, if any.          */ | 
|  |  | 
|  | if (amsg->flags & ADB_IOP_TIMEOUT) { | 
|  | msg->reply[0] = ADB_IOP_TIMEOUT | ADB_IOP_AUTOPOLL; | 
|  | msg->reply[1] = 0; | 
|  | msg->reply[2] = 0; | 
|  | if (req && (adb_iop_state != idle)) { | 
|  | adb_iop_end_req(req, idle); | 
|  | } | 
|  | } else { | 
|  | /* TODO: is it possible for more than one chunk of data  */ | 
|  | /*       to arrive before the timeout? If so we need to */ | 
|  | /*       use reply_ptr here like the other drivers do.  */ | 
|  | if ((adb_iop_state == awaiting_reply) && | 
|  | (amsg->flags & ADB_IOP_EXPLICIT)) { | 
|  | req->reply_len = amsg->count + 1; | 
|  | memcpy(req->reply, &amsg->cmd, req->reply_len); | 
|  | } else { | 
|  | adb_input(&amsg->cmd, amsg->count + 1, regs, | 
|  | amsg->flags & ADB_IOP_AUTOPOLL); | 
|  | } | 
|  | memcpy(msg->reply, msg->message, IOP_MSG_LEN); | 
|  | } | 
|  | iop_complete_message(msg); | 
|  | local_irq_restore(flags); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Start sending an ADB packet, IOP style | 
|  | * | 
|  | * There isn't much to do other than hand the packet over to the IOP | 
|  | * after encapsulating it in an adb_iopmsg. | 
|  | */ | 
|  |  | 
|  | static void adb_iop_start(void) | 
|  | { | 
|  | unsigned long flags; | 
|  | struct adb_request *req; | 
|  | struct adb_iopmsg amsg; | 
|  | #ifdef DEBUG_ADB_IOP | 
|  | int i; | 
|  | #endif | 
|  |  | 
|  | /* get the packet to send */ | 
|  | req = current_req; | 
|  | if (!req) return; | 
|  |  | 
|  | local_irq_save(flags); | 
|  |  | 
|  | #ifdef DEBUG_ADB_IOP | 
|  | printk("adb_iop_start %p: sending packet, %d bytes:", req, req->nbytes); | 
|  | for (i = 0 ; i < req->nbytes ; i++) | 
|  | printk(" %02X", (uint) req->data[i]); | 
|  | printk("\n"); | 
|  | #endif | 
|  |  | 
|  | /* The IOP takes MacII-style packets, so */ | 
|  | /* strip the initial ADB_PACKET byte.    */ | 
|  |  | 
|  | amsg.flags = ADB_IOP_EXPLICIT; | 
|  | amsg.count = req->nbytes - 2; | 
|  |  | 
|  | /* amsg.data immediately follows amsg.cmd, effectively making */ | 
|  | /* amsg.cmd a pointer to the beginning of a full ADB packet.  */ | 
|  | memcpy(&amsg.cmd, req->data + 1, req->nbytes - 1); | 
|  |  | 
|  | req->sent = 1; | 
|  | adb_iop_state = sending; | 
|  | local_irq_restore(flags); | 
|  |  | 
|  | /* Now send it. The IOP manager will call adb_iop_complete */ | 
|  | /* when the packet has been sent.                          */ | 
|  |  | 
|  | iop_send_message(ADB_IOP, ADB_CHAN, req, | 
|  | sizeof(amsg), (__u8 *) &amsg, adb_iop_complete); | 
|  | } | 
|  |  | 
|  | int adb_iop_probe(void) | 
|  | { | 
|  | if (!iop_ism_present) return -ENODEV; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int adb_iop_init(void) | 
|  | { | 
|  | printk("adb: IOP ISM driver v0.4 for Unified ADB.\n"); | 
|  | iop_listen(ADB_IOP, ADB_CHAN, adb_iop_listen, "ADB"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int adb_iop_send_request(struct adb_request *req, int sync) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | err = adb_iop_write(req); | 
|  | if (err) return err; | 
|  |  | 
|  | if (sync) { | 
|  | while (!req->complete) adb_iop_poll(); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int adb_iop_write(struct adb_request *req) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | if ((req->nbytes < 2) || (req->data[0] != ADB_PACKET)) { | 
|  | req->complete = 1; | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | local_irq_save(flags); | 
|  |  | 
|  | req->next = 0; | 
|  | req->sent = 0; | 
|  | req->complete = 0; | 
|  | req->reply_len = 0; | 
|  |  | 
|  | if (current_req != 0) { | 
|  | last_req->next = req; | 
|  | last_req = req; | 
|  | } else { | 
|  | current_req = req; | 
|  | last_req = req; | 
|  | } | 
|  |  | 
|  | local_irq_restore(flags); | 
|  | if (adb_iop_state == idle) adb_iop_start(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int adb_iop_autopoll(int devs) | 
|  | { | 
|  | /* TODO: how do we enable/disable autopoll? */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void adb_iop_poll(void) | 
|  | { | 
|  | if (adb_iop_state == idle) adb_iop_start(); | 
|  | iop_ism_irq(0, (void *) ADB_IOP, NULL); | 
|  | } | 
|  |  | 
|  | int adb_iop_reset_bus(void) | 
|  | { | 
|  | struct adb_request req = { | 
|  | .reply_expected = 0, | 
|  | .nbytes = 2, | 
|  | .data = { ADB_PACKET, 0 }, | 
|  | }; | 
|  |  | 
|  | adb_iop_write(&req); | 
|  | while (!req.complete) { | 
|  | adb_iop_poll(); | 
|  | schedule(); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } |