|  | /* | 
|  | * Generic HDLC support routines for Linux | 
|  | * Cisco HDLC support | 
|  | * | 
|  | * Copyright (C) 2000 - 2003 Krzysztof Halasa <khc@pm.waw.pl> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify it | 
|  | * under the terms of version 2 of the GNU General Public License | 
|  | * as published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/poll.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/if_arp.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/pkt_sched.h> | 
|  | #include <linux/inetdevice.h> | 
|  | #include <linux/lapb.h> | 
|  | #include <linux/rtnetlink.h> | 
|  | #include <linux/hdlc.h> | 
|  |  | 
|  | #undef DEBUG_HARD_HEADER | 
|  |  | 
|  | #define CISCO_MULTICAST		0x8F	/* Cisco multicast address */ | 
|  | #define CISCO_UNICAST		0x0F	/* Cisco unicast address */ | 
|  | #define CISCO_KEEPALIVE		0x8035	/* Cisco keepalive protocol */ | 
|  | #define CISCO_SYS_INFO		0x2000	/* Cisco interface/system info */ | 
|  | #define CISCO_ADDR_REQ		0	/* Cisco address request */ | 
|  | #define CISCO_ADDR_REPLY	1	/* Cisco address reply */ | 
|  | #define CISCO_KEEPALIVE_REQ	2	/* Cisco keepalive request */ | 
|  |  | 
|  |  | 
|  | static int cisco_hard_header(struct sk_buff *skb, struct net_device *dev, | 
|  | u16 type, void *daddr, void *saddr, | 
|  | unsigned int len) | 
|  | { | 
|  | hdlc_header *data; | 
|  | #ifdef DEBUG_HARD_HEADER | 
|  | printk(KERN_DEBUG "%s: cisco_hard_header called\n", dev->name); | 
|  | #endif | 
|  |  | 
|  | skb_push(skb, sizeof(hdlc_header)); | 
|  | data = (hdlc_header*)skb->data; | 
|  | if (type == CISCO_KEEPALIVE) | 
|  | data->address = CISCO_MULTICAST; | 
|  | else | 
|  | data->address = CISCO_UNICAST; | 
|  | data->control = 0; | 
|  | data->protocol = htons(type); | 
|  |  | 
|  | return sizeof(hdlc_header); | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | static void cisco_keepalive_send(struct net_device *dev, u32 type, | 
|  | u32 par1, u32 par2) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  | cisco_packet *data; | 
|  |  | 
|  | skb = dev_alloc_skb(sizeof(hdlc_header) + sizeof(cisco_packet)); | 
|  | if (!skb) { | 
|  | printk(KERN_WARNING | 
|  | "%s: Memory squeeze on cisco_keepalive_send()\n", | 
|  | dev->name); | 
|  | return; | 
|  | } | 
|  | skb_reserve(skb, 4); | 
|  | cisco_hard_header(skb, dev, CISCO_KEEPALIVE, NULL, NULL, 0); | 
|  | data = (cisco_packet*)skb->data; | 
|  |  | 
|  | data->type = htonl(type); | 
|  | data->par1 = htonl(par1); | 
|  | data->par2 = htonl(par2); | 
|  | data->rel = 0xFFFF; | 
|  | /* we will need do_div here if 1000 % HZ != 0 */ | 
|  | data->time = htonl((jiffies - INITIAL_JIFFIES) * (1000 / HZ)); | 
|  |  | 
|  | skb_put(skb, sizeof(cisco_packet)); | 
|  | skb->priority = TC_PRIO_CONTROL; | 
|  | skb->dev = dev; | 
|  | skb->nh.raw = skb->data; | 
|  |  | 
|  | dev_queue_xmit(skb); | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | static __be16 cisco_type_trans(struct sk_buff *skb, struct net_device *dev) | 
|  | { | 
|  | hdlc_header *data = (hdlc_header*)skb->data; | 
|  |  | 
|  | if (skb->len < sizeof(hdlc_header)) | 
|  | return __constant_htons(ETH_P_HDLC); | 
|  |  | 
|  | if (data->address != CISCO_MULTICAST && | 
|  | data->address != CISCO_UNICAST) | 
|  | return __constant_htons(ETH_P_HDLC); | 
|  |  | 
|  | switch(data->protocol) { | 
|  | case __constant_htons(ETH_P_IP): | 
|  | case __constant_htons(ETH_P_IPX): | 
|  | case __constant_htons(ETH_P_IPV6): | 
|  | skb_pull(skb, sizeof(hdlc_header)); | 
|  | return data->protocol; | 
|  | default: | 
|  | return __constant_htons(ETH_P_HDLC); | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | static int cisco_rx(struct sk_buff *skb) | 
|  | { | 
|  | struct net_device *dev = skb->dev; | 
|  | hdlc_device *hdlc = dev_to_hdlc(dev); | 
|  | hdlc_header *data = (hdlc_header*)skb->data; | 
|  | cisco_packet *cisco_data; | 
|  | struct in_device *in_dev; | 
|  | u32 addr, mask; | 
|  |  | 
|  | if (skb->len < sizeof(hdlc_header)) | 
|  | goto rx_error; | 
|  |  | 
|  | if (data->address != CISCO_MULTICAST && | 
|  | data->address != CISCO_UNICAST) | 
|  | goto rx_error; | 
|  |  | 
|  | switch(ntohs(data->protocol)) { | 
|  | case CISCO_SYS_INFO: | 
|  | /* Packet is not needed, drop it. */ | 
|  | dev_kfree_skb_any(skb); | 
|  | return NET_RX_SUCCESS; | 
|  |  | 
|  | case CISCO_KEEPALIVE: | 
|  | if (skb->len != sizeof(hdlc_header) + CISCO_PACKET_LEN && | 
|  | skb->len != sizeof(hdlc_header) + CISCO_BIG_PACKET_LEN) { | 
|  | printk(KERN_INFO "%s: Invalid length of Cisco " | 
|  | "control packet (%d bytes)\n", | 
|  | dev->name, skb->len); | 
|  | goto rx_error; | 
|  | } | 
|  |  | 
|  | cisco_data = (cisco_packet*)(skb->data + sizeof(hdlc_header)); | 
|  |  | 
|  | switch(ntohl (cisco_data->type)) { | 
|  | case CISCO_ADDR_REQ: /* Stolen from syncppp.c :-) */ | 
|  | in_dev = dev->ip_ptr; | 
|  | addr = 0; | 
|  | mask = ~0; /* is the mask correct? */ | 
|  |  | 
|  | if (in_dev != NULL) { | 
|  | struct in_ifaddr **ifap = &in_dev->ifa_list; | 
|  |  | 
|  | while (*ifap != NULL) { | 
|  | if (strcmp(dev->name, | 
|  | (*ifap)->ifa_label) == 0) { | 
|  | addr = (*ifap)->ifa_local; | 
|  | mask = (*ifap)->ifa_mask; | 
|  | break; | 
|  | } | 
|  | ifap = &(*ifap)->ifa_next; | 
|  | } | 
|  |  | 
|  | cisco_keepalive_send(dev, CISCO_ADDR_REPLY, | 
|  | addr, mask); | 
|  | } | 
|  | dev_kfree_skb_any(skb); | 
|  | return NET_RX_SUCCESS; | 
|  |  | 
|  | case CISCO_ADDR_REPLY: | 
|  | printk(KERN_INFO "%s: Unexpected Cisco IP address " | 
|  | "reply\n", dev->name); | 
|  | goto rx_error; | 
|  |  | 
|  | case CISCO_KEEPALIVE_REQ: | 
|  | hdlc->state.cisco.rxseq = ntohl(cisco_data->par1); | 
|  | if (hdlc->state.cisco.request_sent && | 
|  | ntohl(cisco_data->par2)==hdlc->state.cisco.txseq) { | 
|  | hdlc->state.cisco.last_poll = jiffies; | 
|  | if (!hdlc->state.cisco.up) { | 
|  | u32 sec, min, hrs, days; | 
|  | sec = ntohl(cisco_data->time) / 1000; | 
|  | min = sec / 60; sec -= min * 60; | 
|  | hrs = min / 60; min -= hrs * 60; | 
|  | days = hrs / 24; hrs -= days * 24; | 
|  | printk(KERN_INFO "%s: Link up (peer " | 
|  | "uptime %ud%uh%um%us)\n", | 
|  | dev->name, days, hrs, | 
|  | min, sec); | 
|  | netif_carrier_on(dev); | 
|  | hdlc->state.cisco.up = 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | dev_kfree_skb_any(skb); | 
|  | return NET_RX_SUCCESS; | 
|  | } /* switch(keepalive type) */ | 
|  | } /* switch(protocol) */ | 
|  |  | 
|  | printk(KERN_INFO "%s: Unsupported protocol %x\n", dev->name, | 
|  | data->protocol); | 
|  | dev_kfree_skb_any(skb); | 
|  | return NET_RX_DROP; | 
|  |  | 
|  | rx_error: | 
|  | hdlc->stats.rx_errors++; /* Mark error */ | 
|  | dev_kfree_skb_any(skb); | 
|  | return NET_RX_DROP; | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | static void cisco_timer(unsigned long arg) | 
|  | { | 
|  | struct net_device *dev = (struct net_device *)arg; | 
|  | hdlc_device *hdlc = dev_to_hdlc(dev); | 
|  |  | 
|  | if (hdlc->state.cisco.up && | 
|  | time_after(jiffies, hdlc->state.cisco.last_poll + | 
|  | hdlc->state.cisco.settings.timeout * HZ)) { | 
|  | hdlc->state.cisco.up = 0; | 
|  | printk(KERN_INFO "%s: Link down\n", dev->name); | 
|  | netif_carrier_off(dev); | 
|  | } | 
|  |  | 
|  | cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ, | 
|  | ++hdlc->state.cisco.txseq, | 
|  | hdlc->state.cisco.rxseq); | 
|  | hdlc->state.cisco.request_sent = 1; | 
|  | hdlc->state.cisco.timer.expires = jiffies + | 
|  | hdlc->state.cisco.settings.interval * HZ; | 
|  | hdlc->state.cisco.timer.function = cisco_timer; | 
|  | hdlc->state.cisco.timer.data = arg; | 
|  | add_timer(&hdlc->state.cisco.timer); | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | static void cisco_start(struct net_device *dev) | 
|  | { | 
|  | hdlc_device *hdlc = dev_to_hdlc(dev); | 
|  | hdlc->state.cisco.up = 0; | 
|  | hdlc->state.cisco.request_sent = 0; | 
|  | hdlc->state.cisco.txseq = hdlc->state.cisco.rxseq = 0; | 
|  |  | 
|  | init_timer(&hdlc->state.cisco.timer); | 
|  | hdlc->state.cisco.timer.expires = jiffies + HZ; /*First poll after 1s*/ | 
|  | hdlc->state.cisco.timer.function = cisco_timer; | 
|  | hdlc->state.cisco.timer.data = (unsigned long)dev; | 
|  | add_timer(&hdlc->state.cisco.timer); | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | static void cisco_stop(struct net_device *dev) | 
|  | { | 
|  | hdlc_device *hdlc = dev_to_hdlc(dev); | 
|  | del_timer_sync(&hdlc->state.cisco.timer); | 
|  | if (netif_carrier_ok(dev)) | 
|  | netif_carrier_off(dev); | 
|  | hdlc->state.cisco.up = 0; | 
|  | hdlc->state.cisco.request_sent = 0; | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | int hdlc_cisco_ioctl(struct net_device *dev, struct ifreq *ifr) | 
|  | { | 
|  | cisco_proto __user *cisco_s = ifr->ifr_settings.ifs_ifsu.cisco; | 
|  | const size_t size = sizeof(cisco_proto); | 
|  | cisco_proto new_settings; | 
|  | hdlc_device *hdlc = dev_to_hdlc(dev); | 
|  | int result; | 
|  |  | 
|  | switch (ifr->ifr_settings.type) { | 
|  | case IF_GET_PROTO: | 
|  | ifr->ifr_settings.type = IF_PROTO_CISCO; | 
|  | if (ifr->ifr_settings.size < size) { | 
|  | ifr->ifr_settings.size = size; /* data size wanted */ | 
|  | return -ENOBUFS; | 
|  | } | 
|  | if (copy_to_user(cisco_s, &hdlc->state.cisco.settings, size)) | 
|  | return -EFAULT; | 
|  | return 0; | 
|  |  | 
|  | case IF_PROTO_CISCO: | 
|  | if(!capable(CAP_NET_ADMIN)) | 
|  | return -EPERM; | 
|  |  | 
|  | if(dev->flags & IFF_UP) | 
|  | return -EBUSY; | 
|  |  | 
|  | if (copy_from_user(&new_settings, cisco_s, size)) | 
|  | return -EFAULT; | 
|  |  | 
|  | if (new_settings.interval < 1 || | 
|  | new_settings.timeout < 2) | 
|  | return -EINVAL; | 
|  |  | 
|  | result=hdlc->attach(dev, ENCODING_NRZ,PARITY_CRC16_PR1_CCITT); | 
|  |  | 
|  | if (result) | 
|  | return result; | 
|  |  | 
|  | hdlc_proto_detach(hdlc); | 
|  | memcpy(&hdlc->state.cisco.settings, &new_settings, size); | 
|  | memset(&hdlc->proto, 0, sizeof(hdlc->proto)); | 
|  |  | 
|  | hdlc->proto.start = cisco_start; | 
|  | hdlc->proto.stop = cisco_stop; | 
|  | hdlc->proto.netif_rx = cisco_rx; | 
|  | hdlc->proto.type_trans = cisco_type_trans; | 
|  | hdlc->proto.id = IF_PROTO_CISCO; | 
|  | dev->hard_start_xmit = hdlc->xmit; | 
|  | dev->hard_header = cisco_hard_header; | 
|  | dev->hard_header_cache = NULL; | 
|  | dev->type = ARPHRD_CISCO; | 
|  | dev->flags = IFF_POINTOPOINT | IFF_NOARP; | 
|  | dev->addr_len = 0; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | return -EINVAL; | 
|  | } |