|  | /* | 
|  | * This file is subject to the terms and conditions of the GNU General Public | 
|  | * License.  See the file "COPYING" in the main directory of this archive | 
|  | * for more details. | 
|  | * | 
|  | * Copyright (C) 2005 Silicon Graphics, Inc. All rights reserved. | 
|  | * | 
|  | * This work was based on the 2.4/2.6 kernel development by Dick Reigner. | 
|  | * Work to add BIOS PROM support was completed by Mike Habeck. | 
|  | */ | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/proc_fs.h> | 
|  | #include <linux/types.h> | 
|  |  | 
|  | #include <asm/sn/addrs.h> | 
|  | #include <asm/sn/l1.h> | 
|  | #include <asm/sn/module.h> | 
|  | #include <asm/sn/pcibr_provider.h> | 
|  | #include <asm/sn/pcibus_provider_defs.h> | 
|  | #include <asm/sn/pcidev.h> | 
|  | #include <asm/sn/sn_sal.h> | 
|  | #include <asm/sn/types.h> | 
|  |  | 
|  | #include "../pci.h" | 
|  | #include "pci_hotplug.h" | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_AUTHOR("SGI (prarit@sgi.com, dickie@sgi.com, habeck@sgi.com)"); | 
|  | MODULE_DESCRIPTION("SGI Altix Hot Plug PCI Controller Driver"); | 
|  |  | 
|  | #define PCIIO_ASIC_TYPE_TIOCA     4 | 
|  | #define PCI_SLOT_ALREADY_UP       2     /* slot already up */ | 
|  | #define PCI_SLOT_ALREADY_DOWN     3     /* slot already down */ | 
|  | #define PCI_L1_ERR                7     /* L1 console command error */ | 
|  | #define PCI_EMPTY_33MHZ          15     /* empty 33 MHz bus */ | 
|  | #define PCI_L1_QSIZE            128     /* our L1 message buffer size */ | 
|  | #define SN_MAX_HP_SLOTS		 32	/* max number of hotplug slots */ | 
|  | #define SGI_HOTPLUG_PROM_REV	0x0420  /* Min. required PROM version */ | 
|  |  | 
|  | /* internal list head */ | 
|  | static struct list_head sn_hp_list; | 
|  |  | 
|  | /* hotplug_slot struct's private pointer */ | 
|  | struct slot { | 
|  | int device_num; | 
|  | struct pci_bus *pci_bus; | 
|  | /* this struct for glue internal only */ | 
|  | struct hotplug_slot *hotplug_slot; | 
|  | struct list_head hp_list; | 
|  | }; | 
|  |  | 
|  | struct pcibr_slot_enable_resp { | 
|  | int resp_sub_errno; | 
|  | char resp_l1_msg[PCI_L1_QSIZE + 1]; | 
|  | }; | 
|  |  | 
|  | struct pcibr_slot_disable_resp { | 
|  | int resp_sub_errno; | 
|  | char resp_l1_msg[PCI_L1_QSIZE + 1]; | 
|  | }; | 
|  |  | 
|  | enum sn_pci_req_e { | 
|  | PCI_REQ_SLOT_ELIGIBLE, | 
|  | PCI_REQ_SLOT_DISABLE | 
|  | }; | 
|  |  | 
|  | static int enable_slot(struct hotplug_slot *slot); | 
|  | static int disable_slot(struct hotplug_slot *slot); | 
|  | static int get_power_status(struct hotplug_slot *slot, u8 *value); | 
|  |  | 
|  | static struct hotplug_slot_ops sn_hotplug_slot_ops = { | 
|  | .owner                  = THIS_MODULE, | 
|  | .enable_slot            = enable_slot, | 
|  | .disable_slot           = disable_slot, | 
|  | .get_power_status       = get_power_status, | 
|  | }; | 
|  |  | 
|  | static DECLARE_MUTEX(sn_hotplug_sem); | 
|  |  | 
|  | static int sn_pci_slot_valid(struct pci_bus *pci_bus, int device) | 
|  | { | 
|  | struct pcibus_info *pcibus_info; | 
|  | int bricktype; | 
|  | int bus_num; | 
|  |  | 
|  | pcibus_info = SN_PCIBUS_BUSSOFT_INFO(pci_bus); | 
|  |  | 
|  | /* Check to see if this is a valid slot on 'pci_bus' */ | 
|  | if (!(pcibus_info->pbi_valid_devices & (1 << device))) | 
|  | return -EPERM; | 
|  |  | 
|  | bricktype = MODULE_GET_BTYPE(pcibus_info->pbi_moduleid); | 
|  | bus_num = pcibus_info->pbi_buscommon.bs_persist_busnum & 0xf; | 
|  |  | 
|  | /* Do not allow hotplug operations on base I/O cards */ | 
|  | if ((bricktype == L1_BRICKTYPE_IX ||  bricktype == L1_BRICKTYPE_IA) && | 
|  | (bus_num == 1 && device != 1)) | 
|  | return -EPERM; | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static int sn_pci_bus_valid(struct pci_bus *pci_bus) | 
|  | { | 
|  | struct pcibus_info *pcibus_info; | 
|  | int asic_type; | 
|  | int bricktype; | 
|  |  | 
|  | pcibus_info = SN_PCIBUS_BUSSOFT_INFO(pci_bus); | 
|  |  | 
|  | /* Don't register slots hanging off the TIOCA bus */ | 
|  | asic_type = pcibus_info->pbi_buscommon.bs_asic_type; | 
|  | if (asic_type == PCIIO_ASIC_TYPE_TIOCA) | 
|  | return -EPERM; | 
|  |  | 
|  | /* Only register slots in I/O Bricks that support hotplug */ | 
|  | bricktype = MODULE_GET_BTYPE(pcibus_info->pbi_moduleid); | 
|  | switch (bricktype) { | 
|  | case L1_BRICKTYPE_IX: | 
|  | case L1_BRICKTYPE_PX: | 
|  | case L1_BRICKTYPE_IA: | 
|  | case L1_BRICKTYPE_PA: | 
|  | return 1; | 
|  | break; | 
|  | default: | 
|  | return -EPERM; | 
|  | break; | 
|  | } | 
|  |  | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | static int sn_hp_slot_private_alloc(struct hotplug_slot *bss_hotplug_slot, | 
|  | struct pci_bus *pci_bus, int device) | 
|  | { | 
|  | struct pcibus_info *pcibus_info; | 
|  | struct slot *slot; | 
|  |  | 
|  | pcibus_info = SN_PCIBUS_BUSSOFT_INFO(pci_bus); | 
|  |  | 
|  | bss_hotplug_slot->private = kcalloc(1, sizeof(struct slot), | 
|  | GFP_KERNEL); | 
|  | if (!bss_hotplug_slot->private) | 
|  | return -ENOMEM; | 
|  | slot = (struct slot *)bss_hotplug_slot->private; | 
|  |  | 
|  | bss_hotplug_slot->name = kmalloc(33, GFP_KERNEL); | 
|  | if (!bss_hotplug_slot->name) { | 
|  | kfree(bss_hotplug_slot->private); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | slot->device_num = device; | 
|  | slot->pci_bus = pci_bus; | 
|  |  | 
|  | sprintf(bss_hotplug_slot->name, "module_%c%c%c%c%.2d_b_%d_s_%d", | 
|  | '0'+RACK_GET_CLASS(MODULE_GET_RACK(pcibus_info->pbi_moduleid)), | 
|  | '0'+RACK_GET_GROUP(MODULE_GET_RACK(pcibus_info->pbi_moduleid)), | 
|  | '0'+RACK_GET_NUM(MODULE_GET_RACK(pcibus_info->pbi_moduleid)), | 
|  | MODULE_GET_BTCHAR(pcibus_info->pbi_moduleid), | 
|  | MODULE_GET_BPOS(pcibus_info->pbi_moduleid), | 
|  | ((int)pcibus_info->pbi_buscommon.bs_persist_busnum) & 0xf, | 
|  | device + 1); | 
|  |  | 
|  | slot->hotplug_slot = bss_hotplug_slot; | 
|  | list_add(&slot->hp_list, &sn_hp_list); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct hotplug_slot * sn_hp_destroy(void) | 
|  | { | 
|  | struct slot *slot; | 
|  | struct list_head *list; | 
|  | struct hotplug_slot *bss_hotplug_slot = NULL; | 
|  |  | 
|  | list_for_each(list, &sn_hp_list) { | 
|  | slot = list_entry(list, struct slot, hp_list); | 
|  | bss_hotplug_slot = slot->hotplug_slot; | 
|  | list_del(&((struct slot *)bss_hotplug_slot->private)-> | 
|  | hp_list); | 
|  | break; | 
|  | } | 
|  | return bss_hotplug_slot; | 
|  | } | 
|  |  | 
|  | static void sn_bus_alloc_data(struct pci_dev *dev) | 
|  | { | 
|  | struct list_head *node; | 
|  | struct pci_bus *subordinate_bus; | 
|  | struct pci_dev *child; | 
|  |  | 
|  | sn_pci_fixup_slot(dev); | 
|  |  | 
|  | /* Recursively sets up the sn_irq_info structs */ | 
|  | if (dev->subordinate) { | 
|  | subordinate_bus = dev->subordinate; | 
|  | list_for_each(node, &subordinate_bus->devices) { | 
|  | child = list_entry(node, struct pci_dev, bus_list); | 
|  | sn_bus_alloc_data(child); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void sn_bus_free_data(struct pci_dev *dev) | 
|  | { | 
|  | struct list_head *node; | 
|  | struct pci_bus *subordinate_bus; | 
|  | struct pci_dev *child; | 
|  |  | 
|  | /* Recursively clean up sn_irq_info structs */ | 
|  | if (dev->subordinate) { | 
|  | subordinate_bus = dev->subordinate; | 
|  | list_for_each(node, &subordinate_bus->devices) { | 
|  | child = list_entry(node, struct pci_dev, bus_list); | 
|  | sn_bus_free_data(child); | 
|  | } | 
|  | } | 
|  | sn_pci_unfixup_slot(dev); | 
|  | } | 
|  |  | 
|  | static u8 sn_power_status_get(struct hotplug_slot *bss_hotplug_slot) | 
|  | { | 
|  | struct slot *slot = (struct slot *)bss_hotplug_slot->private; | 
|  | struct pcibus_info *pcibus_info; | 
|  | u8 retval; | 
|  |  | 
|  | pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus); | 
|  | retval = pcibus_info->pbi_enabled_devices & (1 << slot->device_num); | 
|  |  | 
|  | return retval ? 1 : 0; | 
|  | } | 
|  |  | 
|  | static void sn_slot_mark_enable(struct hotplug_slot *bss_hotplug_slot, | 
|  | int device_num) | 
|  | { | 
|  | struct slot *slot = (struct slot *)bss_hotplug_slot->private; | 
|  | struct pcibus_info *pcibus_info; | 
|  |  | 
|  | pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus); | 
|  | pcibus_info->pbi_enabled_devices |= (1 << device_num); | 
|  | } | 
|  |  | 
|  | static void sn_slot_mark_disable(struct hotplug_slot *bss_hotplug_slot, | 
|  | int device_num) | 
|  | { | 
|  | struct slot *slot = (struct slot *)bss_hotplug_slot->private; | 
|  | struct pcibus_info *pcibus_info; | 
|  |  | 
|  | pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus); | 
|  | pcibus_info->pbi_enabled_devices &= ~(1 << device_num); | 
|  | } | 
|  |  | 
|  | static int sn_slot_enable(struct hotplug_slot *bss_hotplug_slot, | 
|  | int device_num) | 
|  | { | 
|  | struct slot *slot = (struct slot *)bss_hotplug_slot->private; | 
|  | struct pcibus_info *pcibus_info; | 
|  | struct pcibr_slot_enable_resp resp; | 
|  | int rc; | 
|  |  | 
|  | pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus); | 
|  |  | 
|  | /* | 
|  | * Power-on and initialize the slot in the SN | 
|  | * PCI infrastructure. | 
|  | */ | 
|  | rc = sal_pcibr_slot_enable(pcibus_info, device_num, &resp); | 
|  |  | 
|  | if (rc == PCI_SLOT_ALREADY_UP) { | 
|  | dev_dbg(slot->pci_bus->self, "is already active\n"); | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  | if (rc == PCI_L1_ERR) { | 
|  | dev_dbg(slot->pci_bus->self, | 
|  | "L1 failure %d with message: %s", | 
|  | resp.resp_sub_errno, resp.resp_l1_msg); | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  | if (rc) { | 
|  | dev_dbg(slot->pci_bus->self, | 
|  | "insert failed with error %d sub-error %d\n", | 
|  | rc, resp.resp_sub_errno); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | sn_slot_mark_enable(bss_hotplug_slot, device_num); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int sn_slot_disable(struct hotplug_slot *bss_hotplug_slot, | 
|  | int device_num, int action) | 
|  | { | 
|  | struct slot *slot = (struct slot *)bss_hotplug_slot->private; | 
|  | struct pcibus_info *pcibus_info; | 
|  | struct pcibr_slot_disable_resp resp; | 
|  | int rc; | 
|  |  | 
|  | pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus); | 
|  |  | 
|  | rc = sal_pcibr_slot_disable(pcibus_info, device_num, action, &resp); | 
|  |  | 
|  | if (action == PCI_REQ_SLOT_ELIGIBLE && rc == PCI_SLOT_ALREADY_DOWN) { | 
|  | dev_dbg(slot->pci_bus->self, "Slot %s already inactive\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | if (action == PCI_REQ_SLOT_ELIGIBLE && rc == PCI_EMPTY_33MHZ) { | 
|  | dev_dbg(slot->pci_bus->self, | 
|  | "Cannot remove last 33MHz card\n"); | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  | if (action == PCI_REQ_SLOT_ELIGIBLE && rc == PCI_L1_ERR) { | 
|  | dev_dbg(slot->pci_bus->self, | 
|  | "L1 failure %d with message \n%s\n", | 
|  | resp.resp_sub_errno, resp.resp_l1_msg); | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  | if (action == PCI_REQ_SLOT_ELIGIBLE && rc) { | 
|  | dev_dbg(slot->pci_bus->self, | 
|  | "remove failed with error %d sub-error %d\n", | 
|  | rc, resp.resp_sub_errno); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | if (action == PCI_REQ_SLOT_ELIGIBLE && !rc) | 
|  | return 0; | 
|  |  | 
|  | if (action == PCI_REQ_SLOT_DISABLE && !rc) { | 
|  | sn_slot_mark_disable(bss_hotplug_slot, device_num); | 
|  | dev_dbg(slot->pci_bus->self, "remove successful\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (action == PCI_REQ_SLOT_DISABLE && rc) { | 
|  | dev_dbg(slot->pci_bus->self,"remove failed rc = %d\n", rc); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int enable_slot(struct hotplug_slot *bss_hotplug_slot) | 
|  | { | 
|  | struct slot *slot = (struct slot *)bss_hotplug_slot->private; | 
|  | struct pci_bus *new_bus = NULL; | 
|  | struct pci_dev *dev; | 
|  | int func, num_funcs; | 
|  | int new_ppb = 0; | 
|  | int rc; | 
|  |  | 
|  | /* Serialize the Linux PCI infrastructure */ | 
|  | down(&sn_hotplug_sem); | 
|  |  | 
|  | /* | 
|  | * Power-on and initialize the slot in the SN | 
|  | * PCI infrastructure. | 
|  | */ | 
|  | rc = sn_slot_enable(bss_hotplug_slot, slot->device_num); | 
|  | if (rc) { | 
|  | up(&sn_hotplug_sem); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | num_funcs = pci_scan_slot(slot->pci_bus, PCI_DEVFN(slot->device_num+1, | 
|  | PCI_FUNC(0))); | 
|  | if (!num_funcs) { | 
|  | dev_dbg(slot->pci_bus->self, "no device in slot\n"); | 
|  | up(&sn_hotplug_sem); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | sn_pci_controller_fixup(pci_domain_nr(slot->pci_bus), | 
|  | slot->pci_bus->number, | 
|  | slot->pci_bus); | 
|  | /* | 
|  | * Map SN resources for all functions on the card | 
|  | * to the Linux PCI interface and tell the drivers | 
|  | * about them. | 
|  | */ | 
|  | for (func = 0; func < num_funcs;  func++) { | 
|  | dev = pci_get_slot(slot->pci_bus, | 
|  | PCI_DEVFN(slot->device_num + 1, | 
|  | PCI_FUNC(func))); | 
|  |  | 
|  |  | 
|  | if (dev) { | 
|  | if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) { | 
|  | unsigned char sec_bus; | 
|  | pci_read_config_byte(dev, PCI_SECONDARY_BUS, | 
|  | &sec_bus); | 
|  | new_bus = pci_add_new_bus(dev->bus, dev, | 
|  | sec_bus); | 
|  | pci_scan_child_bus(new_bus); | 
|  | sn_pci_controller_fixup(pci_domain_nr(new_bus), | 
|  | new_bus->number, | 
|  | new_bus); | 
|  | new_ppb = 1; | 
|  | } | 
|  | sn_bus_alloc_data(dev); | 
|  | pci_dev_put(dev); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Call the driver for the new device */ | 
|  | pci_bus_add_devices(slot->pci_bus); | 
|  | /* Call the drivers for the new devices subordinate to PPB */ | 
|  | if (new_ppb) | 
|  | pci_bus_add_devices(new_bus); | 
|  |  | 
|  | up(&sn_hotplug_sem); | 
|  |  | 
|  | if (rc == 0) | 
|  | dev_dbg(slot->pci_bus->self, | 
|  | "insert operation successful\n"); | 
|  | else | 
|  | dev_dbg(slot->pci_bus->self, | 
|  | "insert operation failed rc = %d\n", rc); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int disable_slot(struct hotplug_slot *bss_hotplug_slot) | 
|  | { | 
|  | struct slot *slot = (struct slot *)bss_hotplug_slot->private; | 
|  | struct pci_dev *dev; | 
|  | int func; | 
|  | int rc; | 
|  |  | 
|  | /* Acquire update access to the bus */ | 
|  | down(&sn_hotplug_sem); | 
|  |  | 
|  | /* is it okay to bring this slot down? */ | 
|  | rc = sn_slot_disable(bss_hotplug_slot, slot->device_num, | 
|  | PCI_REQ_SLOT_ELIGIBLE); | 
|  | if (rc) | 
|  | goto leaving; | 
|  |  | 
|  | /* Free the SN resources assigned to the Linux device.*/ | 
|  | for (func = 0; func < 8;  func++) { | 
|  | dev = pci_get_slot(slot->pci_bus, | 
|  | PCI_DEVFN(slot->device_num+1, | 
|  | PCI_FUNC(func))); | 
|  | if (dev) { | 
|  | /* | 
|  | * Some drivers may use dma accesses during the | 
|  | * driver remove function. We release the sysdata | 
|  | * areas after the driver remove functions have | 
|  | * been called. | 
|  | */ | 
|  | sn_bus_store_sysdata(dev); | 
|  | sn_bus_free_data(dev); | 
|  | pci_remove_bus_device(dev); | 
|  | pci_dev_put(dev); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* free the collected sysdata pointers */ | 
|  | sn_bus_free_sysdata(); | 
|  |  | 
|  | /* Deactivate slot */ | 
|  | rc = sn_slot_disable(bss_hotplug_slot, slot->device_num, | 
|  | PCI_REQ_SLOT_DISABLE); | 
|  | leaving: | 
|  | /* Release the bus lock */ | 
|  | up(&sn_hotplug_sem); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int get_power_status(struct hotplug_slot *bss_hotplug_slot, u8 *value) | 
|  | { | 
|  | down(&sn_hotplug_sem); | 
|  | *value = sn_power_status_get(bss_hotplug_slot); | 
|  | up(&sn_hotplug_sem); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void sn_release_slot(struct hotplug_slot *bss_hotplug_slot) | 
|  | { | 
|  | kfree(bss_hotplug_slot->info); | 
|  | kfree(bss_hotplug_slot->name); | 
|  | kfree(bss_hotplug_slot->private); | 
|  | kfree(bss_hotplug_slot); | 
|  | } | 
|  |  | 
|  | static int sn_hotplug_slot_register(struct pci_bus *pci_bus) | 
|  | { | 
|  | int device; | 
|  | struct hotplug_slot *bss_hotplug_slot; | 
|  | int rc = 0; | 
|  |  | 
|  | /* | 
|  | * Currently only four devices are supported, | 
|  | * in the future there maybe more -- up to 32. | 
|  | */ | 
|  |  | 
|  | for (device = 0; device < SN_MAX_HP_SLOTS ; device++) { | 
|  | if (sn_pci_slot_valid(pci_bus, device) != 1) | 
|  | continue; | 
|  |  | 
|  | bss_hotplug_slot = kcalloc(1,sizeof(struct hotplug_slot), | 
|  | GFP_KERNEL); | 
|  | if (!bss_hotplug_slot) { | 
|  | rc = -ENOMEM; | 
|  | goto alloc_err; | 
|  | } | 
|  |  | 
|  | bss_hotplug_slot->info = | 
|  | kcalloc(1,sizeof(struct hotplug_slot_info), | 
|  | GFP_KERNEL); | 
|  | if (!bss_hotplug_slot->info) { | 
|  | rc = -ENOMEM; | 
|  | goto alloc_err; | 
|  | } | 
|  |  | 
|  | if (sn_hp_slot_private_alloc(bss_hotplug_slot, | 
|  | pci_bus, device)) { | 
|  | rc = -ENOMEM; | 
|  | goto alloc_err; | 
|  | } | 
|  |  | 
|  | bss_hotplug_slot->ops = &sn_hotplug_slot_ops; | 
|  | bss_hotplug_slot->release = &sn_release_slot; | 
|  |  | 
|  | rc = pci_hp_register(bss_hotplug_slot); | 
|  | if (rc) | 
|  | goto register_err; | 
|  | } | 
|  | dev_dbg(pci_bus->self, "Registered bus with hotplug\n"); | 
|  | return rc; | 
|  |  | 
|  | register_err: | 
|  | dev_dbg(pci_bus->self, "bus failed to register with err = %d\n", | 
|  | rc); | 
|  |  | 
|  | alloc_err: | 
|  | if (rc == -ENOMEM) | 
|  | dev_dbg(pci_bus->self, "Memory allocation error\n"); | 
|  |  | 
|  | /* destroy THIS element */ | 
|  | if (bss_hotplug_slot) | 
|  | sn_release_slot(bss_hotplug_slot); | 
|  |  | 
|  | /* destroy anything else on the list */ | 
|  | while ((bss_hotplug_slot = sn_hp_destroy())) | 
|  | pci_hp_deregister(bss_hotplug_slot); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int sn_pci_hotplug_init(void) | 
|  | { | 
|  | struct pci_bus *pci_bus = NULL; | 
|  | int rc; | 
|  | int registered = 0; | 
|  |  | 
|  | INIT_LIST_HEAD(&sn_hp_list); | 
|  |  | 
|  | if (sn_sal_rev() < SGI_HOTPLUG_PROM_REV) { | 
|  | printk(KERN_ERR "%s: PROM version must be greater than 4.05\n", | 
|  | __FUNCTION__); | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  | while ((pci_bus = pci_find_next_bus(pci_bus))) { | 
|  | if (!pci_bus->sysdata) | 
|  | continue; | 
|  |  | 
|  | rc = sn_pci_bus_valid(pci_bus); | 
|  | if (rc != 1) { | 
|  | dev_dbg(pci_bus->self, "not a valid hotplug bus\n"); | 
|  | continue; | 
|  | } | 
|  | dev_dbg(pci_bus->self, "valid hotplug bus\n"); | 
|  |  | 
|  | rc = sn_hotplug_slot_register(pci_bus); | 
|  | if (!rc) | 
|  | registered = 1; | 
|  | else { | 
|  | registered = 0; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | return registered == 1 ? 0 : -ENODEV; | 
|  | } | 
|  |  | 
|  | static void sn_pci_hotplug_exit(void) | 
|  | { | 
|  | struct hotplug_slot *bss_hotplug_slot; | 
|  |  | 
|  | while ((bss_hotplug_slot = sn_hp_destroy())) { | 
|  | pci_hp_deregister(bss_hotplug_slot); | 
|  | } | 
|  |  | 
|  | if (!list_empty(&sn_hp_list)) | 
|  | printk(KERN_ERR "%s: internal list is not empty\n", __FILE__); | 
|  | } | 
|  |  | 
|  | module_init(sn_pci_hotplug_init); | 
|  | module_exit(sn_pci_hotplug_exit); |