|  | /* | 
|  | *  linux/drivers/s390/crypto/z90main.c | 
|  | * | 
|  | *  z90crypt 1.3.2 | 
|  | * | 
|  | *  Copyright (C)  2001, 2004 IBM Corporation | 
|  | *  Author(s): Robert Burroughs (burrough@us.ibm.com) | 
|  | *             Eric Rossman (edrossma@us.ibm.com) | 
|  | * | 
|  | *  Hotplug & misc device support: Jochen Roehrig (roehrig@de.ibm.com) | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2, or (at your option) | 
|  | * any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
|  | */ | 
|  |  | 
|  | #include <asm/uaccess.h>       // copy_(from|to)_user | 
|  | #include <linux/compat.h> | 
|  | #include <linux/compiler.h> | 
|  | #include <linux/delay.h>       // mdelay | 
|  | #include <linux/init.h> | 
|  | #include <linux/interrupt.h>   // for tasklets | 
|  | #include <linux/ioctl32.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/moduleparam.h> | 
|  | #include <linux/kobject_uevent.h> | 
|  | #include <linux/proc_fs.h> | 
|  | #include <linux/syscalls.h> | 
|  | #include <linux/version.h> | 
|  | #include "z90crypt.h" | 
|  | #include "z90common.h" | 
|  | #ifndef Z90CRYPT_USE_HOTPLUG | 
|  | #include <linux/miscdevice.h> | 
|  | #endif | 
|  |  | 
|  | #define VERSION_CODE(vers, rel, seq) (((vers)<<16) | ((rel)<<8) | (seq)) | 
|  | #if LINUX_VERSION_CODE < VERSION_CODE(2,4,0) /* version < 2.4 */ | 
|  | #  error "This kernel is too old: not supported" | 
|  | #endif | 
|  | #if LINUX_VERSION_CODE > VERSION_CODE(2,7,0) /* version > 2.6 */ | 
|  | #  error "This kernel is too recent: not supported by this file" | 
|  | #endif | 
|  |  | 
|  | #define VERSION_Z90MAIN_C "$Revision: 1.57 $" | 
|  |  | 
|  | static char z90main_version[] __initdata = | 
|  | "z90main.o (" VERSION_Z90MAIN_C "/" | 
|  | VERSION_Z90COMMON_H "/" VERSION_Z90CRYPT_H ")"; | 
|  |  | 
|  | extern char z90hardware_version[]; | 
|  |  | 
|  | /** | 
|  | * Defaults that may be modified. | 
|  | */ | 
|  |  | 
|  | #ifndef Z90CRYPT_USE_HOTPLUG | 
|  | /** | 
|  | * You can specify a different minor at compile time. | 
|  | */ | 
|  | #ifndef Z90CRYPT_MINOR | 
|  | #define Z90CRYPT_MINOR	MISC_DYNAMIC_MINOR | 
|  | #endif | 
|  | #else | 
|  | /** | 
|  | * You can specify a different major at compile time. | 
|  | */ | 
|  | #ifndef Z90CRYPT_MAJOR | 
|  | #define Z90CRYPT_MAJOR	0 | 
|  | #endif | 
|  | #endif | 
|  |  | 
|  | /** | 
|  | * You can specify a different domain at compile time or on the insmod | 
|  | * command line. | 
|  | */ | 
|  | #ifndef DOMAIN_INDEX | 
|  | #define DOMAIN_INDEX	-1 | 
|  | #endif | 
|  |  | 
|  | /** | 
|  | * This is the name under which the device is registered in /proc/modules. | 
|  | */ | 
|  | #define REG_NAME	"z90crypt" | 
|  |  | 
|  | /** | 
|  | * Cleanup should run every CLEANUPTIME seconds and should clean up requests | 
|  | * older than CLEANUPTIME seconds in the past. | 
|  | */ | 
|  | #ifndef CLEANUPTIME | 
|  | #define CLEANUPTIME 20 | 
|  | #endif | 
|  |  | 
|  | /** | 
|  | * Config should run every CONFIGTIME seconds | 
|  | */ | 
|  | #ifndef CONFIGTIME | 
|  | #define CONFIGTIME 30 | 
|  | #endif | 
|  |  | 
|  | /** | 
|  | * The first execution of the config task should take place | 
|  | * immediately after initialization | 
|  | */ | 
|  | #ifndef INITIAL_CONFIGTIME | 
|  | #define INITIAL_CONFIGTIME 1 | 
|  | #endif | 
|  |  | 
|  | /** | 
|  | * Reader should run every READERTIME milliseconds | 
|  | * With the 100Hz patch for s390, z90crypt can lock the system solid while | 
|  | * under heavy load. We'll try to avoid that. | 
|  | */ | 
|  | #ifndef READERTIME | 
|  | #if HZ > 1000 | 
|  | #define READERTIME 2 | 
|  | #else | 
|  | #define READERTIME 10 | 
|  | #endif | 
|  | #endif | 
|  |  | 
|  | /** | 
|  | * turn long device array index into device pointer | 
|  | */ | 
|  | #define LONG2DEVPTR(ndx) (z90crypt.device_p[(ndx)]) | 
|  |  | 
|  | /** | 
|  | * turn short device array index into long device array index | 
|  | */ | 
|  | #define SHRT2LONG(ndx) (z90crypt.overall_device_x.device_index[(ndx)]) | 
|  |  | 
|  | /** | 
|  | * turn short device array index into device pointer | 
|  | */ | 
|  | #define SHRT2DEVPTR(ndx) LONG2DEVPTR(SHRT2LONG(ndx)) | 
|  |  | 
|  | /** | 
|  | * Status for a work-element | 
|  | */ | 
|  | #define STAT_DEFAULT	0x00 // request has not been processed | 
|  |  | 
|  | #define STAT_ROUTED	0x80 // bit 7: requests get routed to specific device | 
|  | //	       else, device is determined each write | 
|  | #define STAT_FAILED	0x40 // bit 6: this bit is set if the request failed | 
|  | //	       before being sent to the hardware. | 
|  | #define STAT_WRITTEN	0x30 // bits 5-4: work to be done, not sent to device | 
|  | //			0x20 // UNUSED state | 
|  | #define STAT_READPEND	0x10 // bits 5-4: work done, we're returning data now | 
|  | #define STAT_NOWORK	0x00 // bits off: no work on any queue | 
|  | #define STAT_RDWRMASK	0x30 // mask for bits 5-4 | 
|  |  | 
|  | /** | 
|  | * Macros to check the status RDWRMASK | 
|  | */ | 
|  | #define CHK_RDWRMASK(statbyte) ((statbyte) & STAT_RDWRMASK) | 
|  | #define SET_RDWRMASK(statbyte, newval) \ | 
|  | {(statbyte) &= ~STAT_RDWRMASK; (statbyte) |= newval;} | 
|  |  | 
|  | /** | 
|  | * Audit Trail.	 Progress of a Work element | 
|  | * audit[0]: Unless noted otherwise, these bits are all set by the process | 
|  | */ | 
|  | #define FP_COPYFROM	0x80 // Caller's buffer has been copied to work element | 
|  | #define FP_BUFFREQ	0x40 // Low Level buffer requested | 
|  | #define FP_BUFFGOT	0x20 // Low Level buffer obtained | 
|  | #define FP_SENT		0x10 // Work element sent to a crypto device | 
|  | // (may be set by process or by reader task) | 
|  | #define FP_PENDING	0x08 // Work element placed on pending queue | 
|  | // (may be set by process or by reader task) | 
|  | #define FP_REQUEST	0x04 // Work element placed on request queue | 
|  | #define FP_ASLEEP	0x02 // Work element about to sleep | 
|  | #define FP_AWAKE	0x01 // Work element has been awakened | 
|  |  | 
|  | /** | 
|  | * audit[1]: These bits are set by the reader task and/or the cleanup task | 
|  | */ | 
|  | #define FP_NOTPENDING	  0x80 // Work element removed from pending queue | 
|  | #define FP_AWAKENING	  0x40 // Caller about to be awakened | 
|  | #define FP_TIMEDOUT	  0x20 // Caller timed out | 
|  | #define FP_RESPSIZESET	  0x10 // Response size copied to work element | 
|  | #define FP_RESPADDRCOPIED 0x08 // Response address copied to work element | 
|  | #define FP_RESPBUFFCOPIED 0x04 // Response buffer copied to work element | 
|  | #define FP_REMREQUEST	  0x02 // Work element removed from request queue | 
|  | #define FP_SIGNALED	  0x01 // Work element was awakened by a signal | 
|  |  | 
|  | /** | 
|  | * audit[2]: unused | 
|  | */ | 
|  |  | 
|  | /** | 
|  | * state of the file handle in private_data.status | 
|  | */ | 
|  | #define STAT_OPEN 0 | 
|  | #define STAT_CLOSED 1 | 
|  |  | 
|  | /** | 
|  | * PID() expands to the process ID of the current process | 
|  | */ | 
|  | #define PID() (current->pid) | 
|  |  | 
|  | /** | 
|  | * Selected Constants.	The number of APs and the number of devices | 
|  | */ | 
|  | #ifndef Z90CRYPT_NUM_APS | 
|  | #define Z90CRYPT_NUM_APS 64 | 
|  | #endif | 
|  | #ifndef Z90CRYPT_NUM_DEVS | 
|  | #define Z90CRYPT_NUM_DEVS Z90CRYPT_NUM_APS | 
|  | #endif | 
|  |  | 
|  | /** | 
|  | * Buffer size for receiving responses. The maximum Response Size | 
|  | * is actually the maximum request size, since in an error condition | 
|  | * the request itself may be returned unchanged. | 
|  | */ | 
|  | #define MAX_RESPONSE_SIZE 0x0000077C | 
|  |  | 
|  | /** | 
|  | * A count and status-byte mask | 
|  | */ | 
|  | struct status { | 
|  | int	      st_count;		    // # of enabled devices | 
|  | int	      disabled_count;	    // # of disabled devices | 
|  | int	      user_disabled_count;  // # of devices disabled via proc fs | 
|  | unsigned char st_mask[Z90CRYPT_NUM_APS]; // current status mask | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * The array of device indexes is a mechanism for fast indexing into | 
|  | * a long (and sparse) array.  For instance, if APs 3, 9 and 47 are | 
|  | * installed, z90CDeviceIndex[0] is 3, z90CDeviceIndex[1] is 9, and | 
|  | * z90CDeviceIndex[2] is 47. | 
|  | */ | 
|  | struct device_x { | 
|  | int device_index[Z90CRYPT_NUM_DEVS]; | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * All devices are arranged in a single array: 64 APs | 
|  | */ | 
|  | struct device { | 
|  | int		 dev_type;	    // PCICA, PCICC, PCIXCC_MCL2, | 
|  | // PCIXCC_MCL3, CEX2C | 
|  | enum devstat	 dev_stat;	    // current device status | 
|  | int		 dev_self_x;	    // Index in array | 
|  | int		 disabled;	    // Set when device is in error | 
|  | int		 user_disabled;	    // Set when device is disabled by user | 
|  | int		 dev_q_depth;	    // q depth | 
|  | unsigned char *	 dev_resp_p;	    // Response buffer address | 
|  | int		 dev_resp_l;	    // Response Buffer length | 
|  | int		 dev_caller_count;  // Number of callers | 
|  | int		 dev_total_req_cnt; // # requests for device since load | 
|  | struct list_head dev_caller_list;   // List of callers | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * There's a struct status and a struct device_x for each device type. | 
|  | */ | 
|  | struct hdware_block { | 
|  | struct status	hdware_mask; | 
|  | struct status	type_mask[Z90CRYPT_NUM_TYPES]; | 
|  | struct device_x type_x_addr[Z90CRYPT_NUM_TYPES]; | 
|  | unsigned char	device_type_array[Z90CRYPT_NUM_APS]; | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * z90crypt is the topmost data structure in the hierarchy. | 
|  | */ | 
|  | struct z90crypt { | 
|  | int		     max_count;		// Nr of possible crypto devices | 
|  | struct status	     mask; | 
|  | int		     q_depth_array[Z90CRYPT_NUM_DEVS]; | 
|  | int		     dev_type_array[Z90CRYPT_NUM_DEVS]; | 
|  | struct device_x	     overall_device_x;	// array device indexes | 
|  | struct device *	     device_p[Z90CRYPT_NUM_DEVS]; | 
|  | int		     terminating; | 
|  | int		     domain_established;// TRUE:  domain has been found | 
|  | int		     cdx;		// Crypto Domain Index | 
|  | int		     len;		// Length of this data structure | 
|  | struct hdware_block *hdware_info; | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * An array of these structures is pointed to from dev_caller | 
|  | * The length of the array depends on the device type. For APs, | 
|  | * there are 8. | 
|  | * | 
|  | * The caller buffer is allocated to the user at OPEN. At WRITE, | 
|  | * it contains the request; at READ, the response. The function | 
|  | * send_to_crypto_device converts the request to device-dependent | 
|  | * form and use the caller's OPEN-allocated buffer for the response. | 
|  | */ | 
|  | struct caller { | 
|  | int		 caller_buf_l;		 // length of original request | 
|  | unsigned char *	 caller_buf_p;		 // Original request on WRITE | 
|  | int		 caller_dev_dep_req_l;	 // len device dependent request | 
|  | unsigned char *	 caller_dev_dep_req_p;	 // Device dependent form | 
|  | unsigned char	 caller_id[8];		 // caller-supplied message id | 
|  | struct list_head caller_liste; | 
|  | unsigned char	 caller_dev_dep_req[MAX_RESPONSE_SIZE]; | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * Function prototypes from z90hardware.c | 
|  | */ | 
|  | enum hdstat query_online(int, int, int, int *, int *); | 
|  | enum devstat reset_device(int, int, int); | 
|  | enum devstat send_to_AP(int, int, int, unsigned char *); | 
|  | enum devstat receive_from_AP(int, int, int, unsigned char *, unsigned char *); | 
|  | int convert_request(unsigned char *, int, short, int, int, int *, | 
|  | unsigned char *); | 
|  | int convert_response(unsigned char *, unsigned char *, int *, unsigned char *); | 
|  |  | 
|  | /** | 
|  | * Low level function prototypes | 
|  | */ | 
|  | static int create_z90crypt(int *); | 
|  | static int refresh_z90crypt(int *); | 
|  | static int find_crypto_devices(struct status *); | 
|  | static int create_crypto_device(int); | 
|  | static int destroy_crypto_device(int); | 
|  | static void destroy_z90crypt(void); | 
|  | static int refresh_index_array(struct status *, struct device_x *); | 
|  | static int probe_device_type(struct device *); | 
|  | static int probe_PCIXCC_type(struct device *); | 
|  |  | 
|  | /** | 
|  | * proc fs definitions | 
|  | */ | 
|  | static struct proc_dir_entry *z90crypt_entry; | 
|  |  | 
|  | /** | 
|  | * data structures | 
|  | */ | 
|  |  | 
|  | /** | 
|  | * work_element.opener points back to this structure | 
|  | */ | 
|  | struct priv_data { | 
|  | pid_t	opener_pid; | 
|  | unsigned char	status;		// 0: open  1: closed | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * A work element is allocated for each request | 
|  | */ | 
|  | struct work_element { | 
|  | struct priv_data *priv_data; | 
|  | pid_t		  pid; | 
|  | int		  devindex;	  // index of device processing this w_e | 
|  | // (If request did not specify device, | 
|  | // -1 until placed onto a queue) | 
|  | int		  devtype; | 
|  | struct list_head  liste;	  // used for requestq and pendingq | 
|  | char		  buffer[128];	  // local copy of user request | 
|  | int		  buff_size;	  // size of the buffer for the request | 
|  | char		  resp_buff[RESPBUFFSIZE]; | 
|  | int		  resp_buff_size; | 
|  | char __user *	  resp_addr;	  // address of response in user space | 
|  | unsigned int	  funccode;	  // function code of request | 
|  | wait_queue_head_t waitq; | 
|  | unsigned long	  requestsent;	  // time at which the request was sent | 
|  | atomic_t	  alarmrung;	  // wake-up signal | 
|  | unsigned char	  caller_id[8];	  // pid + counter, for this w_e | 
|  | unsigned char	  status[1];	  // bits to mark status of the request | 
|  | unsigned char	  audit[3];	  // record of work element's progress | 
|  | unsigned char *	  requestptr;	  // address of request buffer | 
|  | int		  retcode;	  // return code of request | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * High level function prototypes | 
|  | */ | 
|  | static int z90crypt_open(struct inode *, struct file *); | 
|  | static int z90crypt_release(struct inode *, struct file *); | 
|  | static ssize_t z90crypt_read(struct file *, char __user *, size_t, loff_t *); | 
|  | static ssize_t z90crypt_write(struct file *, const char __user *, | 
|  | size_t, loff_t *); | 
|  | static long z90crypt_unlocked_ioctl(struct file *, unsigned int, unsigned long); | 
|  | static long z90crypt_compat_ioctl(struct file *, unsigned int, unsigned long); | 
|  |  | 
|  | static void z90crypt_reader_task(unsigned long); | 
|  | static void z90crypt_schedule_reader_task(unsigned long); | 
|  | static void z90crypt_config_task(unsigned long); | 
|  | static void z90crypt_cleanup_task(unsigned long); | 
|  |  | 
|  | static int z90crypt_status(char *, char **, off_t, int, int *, void *); | 
|  | static int z90crypt_status_write(struct file *, const char __user *, | 
|  | unsigned long, void *); | 
|  |  | 
|  | /** | 
|  | * Hotplug support | 
|  | */ | 
|  |  | 
|  | #ifdef Z90CRYPT_USE_HOTPLUG | 
|  | #define Z90CRYPT_HOTPLUG_ADD	 1 | 
|  | #define Z90CRYPT_HOTPLUG_REMOVE	 2 | 
|  |  | 
|  | static void z90crypt_hotplug_event(int, int, int); | 
|  | #endif | 
|  |  | 
|  | /** | 
|  | * Storage allocated at initialization and used throughout the life of | 
|  | * this insmod | 
|  | */ | 
|  | #ifdef Z90CRYPT_USE_HOTPLUG | 
|  | static int z90crypt_major = Z90CRYPT_MAJOR; | 
|  | #endif | 
|  |  | 
|  | static int domain = DOMAIN_INDEX; | 
|  | static struct z90crypt z90crypt; | 
|  | static int quiesce_z90crypt; | 
|  | static spinlock_t queuespinlock; | 
|  | static struct list_head request_list; | 
|  | static int requestq_count; | 
|  | static struct list_head pending_list; | 
|  | static int pendingq_count; | 
|  |  | 
|  | static struct tasklet_struct reader_tasklet; | 
|  | static struct timer_list reader_timer; | 
|  | static struct timer_list config_timer; | 
|  | static struct timer_list cleanup_timer; | 
|  | static atomic_t total_open; | 
|  | static atomic_t z90crypt_step; | 
|  |  | 
|  | static struct file_operations z90crypt_fops = { | 
|  | .owner		= THIS_MODULE, | 
|  | .read		= z90crypt_read, | 
|  | .write		= z90crypt_write, | 
|  | .unlocked_ioctl	= z90crypt_unlocked_ioctl, | 
|  | #ifdef CONFIG_COMPAT | 
|  | .compat_ioctl	= z90crypt_compat_ioctl, | 
|  | #endif | 
|  | .open		= z90crypt_open, | 
|  | .release	= z90crypt_release | 
|  | }; | 
|  |  | 
|  | #ifndef Z90CRYPT_USE_HOTPLUG | 
|  | static struct miscdevice z90crypt_misc_device = { | 
|  | .minor	    = Z90CRYPT_MINOR, | 
|  | .name	    = DEV_NAME, | 
|  | .fops	    = &z90crypt_fops, | 
|  | .devfs_name = DEV_NAME | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | /** | 
|  | * Documentation values. | 
|  | */ | 
|  | MODULE_AUTHOR("zSeries Linux Crypto Team: Robert H. Burroughs, Eric D. Rossman" | 
|  | "and Jochen Roehrig"); | 
|  | MODULE_DESCRIPTION("zSeries Linux Cryptographic Coprocessor device driver, " | 
|  | "Copyright 2001, 2004 IBM Corporation"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | module_param(domain, int, 0); | 
|  | MODULE_PARM_DESC(domain, "domain index for device"); | 
|  |  | 
|  | #ifdef CONFIG_COMPAT | 
|  | /** | 
|  | * ioctl32 conversion routines | 
|  | */ | 
|  | struct ica_rsa_modexpo_32 { // For 32-bit callers | 
|  | compat_uptr_t	inputdata; | 
|  | unsigned int	inputdatalength; | 
|  | compat_uptr_t	outputdata; | 
|  | unsigned int	outputdatalength; | 
|  | compat_uptr_t	b_key; | 
|  | compat_uptr_t	n_modulus; | 
|  | }; | 
|  |  | 
|  | static long | 
|  | trans_modexpo32(struct file *filp, unsigned int cmd, unsigned long arg) | 
|  | { | 
|  | struct ica_rsa_modexpo_32 __user *mex32u = compat_ptr(arg); | 
|  | struct ica_rsa_modexpo_32  mex32k; | 
|  | struct ica_rsa_modexpo __user *mex64; | 
|  | long ret = 0; | 
|  | unsigned int i; | 
|  |  | 
|  | if (!access_ok(VERIFY_WRITE, mex32u, sizeof(struct ica_rsa_modexpo_32))) | 
|  | return -EFAULT; | 
|  | mex64 = compat_alloc_user_space(sizeof(struct ica_rsa_modexpo)); | 
|  | if (!access_ok(VERIFY_WRITE, mex64, sizeof(struct ica_rsa_modexpo))) | 
|  | return -EFAULT; | 
|  | if (copy_from_user(&mex32k, mex32u, sizeof(struct ica_rsa_modexpo_32))) | 
|  | return -EFAULT; | 
|  | if (__put_user(compat_ptr(mex32k.inputdata), &mex64->inputdata)   || | 
|  | __put_user(mex32k.inputdatalength, &mex64->inputdatalength)   || | 
|  | __put_user(compat_ptr(mex32k.outputdata), &mex64->outputdata) || | 
|  | __put_user(mex32k.outputdatalength, &mex64->outputdatalength) || | 
|  | __put_user(compat_ptr(mex32k.b_key), &mex64->b_key)           || | 
|  | __put_user(compat_ptr(mex32k.n_modulus), &mex64->n_modulus)) | 
|  | return -EFAULT; | 
|  | ret = z90crypt_unlocked_ioctl(filp, cmd, (unsigned long)mex64); | 
|  | if (!ret) | 
|  | if (__get_user(i, &mex64->outputdatalength) || | 
|  | __put_user(i, &mex32u->outputdatalength)) | 
|  | ret = -EFAULT; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | struct ica_rsa_modexpo_crt_32 { // For 32-bit callers | 
|  | compat_uptr_t	inputdata; | 
|  | unsigned int	inputdatalength; | 
|  | compat_uptr_t	outputdata; | 
|  | unsigned int	outputdatalength; | 
|  | compat_uptr_t	bp_key; | 
|  | compat_uptr_t	bq_key; | 
|  | compat_uptr_t	np_prime; | 
|  | compat_uptr_t	nq_prime; | 
|  | compat_uptr_t	u_mult_inv; | 
|  | }; | 
|  |  | 
|  | static long | 
|  | trans_modexpo_crt32(struct file *filp, unsigned int cmd, unsigned long arg) | 
|  | { | 
|  | struct ica_rsa_modexpo_crt_32 __user *crt32u = compat_ptr(arg); | 
|  | struct ica_rsa_modexpo_crt_32  crt32k; | 
|  | struct ica_rsa_modexpo_crt __user *crt64; | 
|  | long ret = 0; | 
|  | unsigned int i; | 
|  |  | 
|  | if (!access_ok(VERIFY_WRITE, crt32u, | 
|  | sizeof(struct ica_rsa_modexpo_crt_32))) | 
|  | return -EFAULT; | 
|  | crt64 = compat_alloc_user_space(sizeof(struct ica_rsa_modexpo_crt)); | 
|  | if (!access_ok(VERIFY_WRITE, crt64, sizeof(struct ica_rsa_modexpo_crt))) | 
|  | return -EFAULT; | 
|  | if (copy_from_user(&crt32k, crt32u, | 
|  | sizeof(struct ica_rsa_modexpo_crt_32))) | 
|  | return -EFAULT; | 
|  | if (__put_user(compat_ptr(crt32k.inputdata), &crt64->inputdata)   || | 
|  | __put_user(crt32k.inputdatalength, &crt64->inputdatalength)   || | 
|  | __put_user(compat_ptr(crt32k.outputdata), &crt64->outputdata) || | 
|  | __put_user(crt32k.outputdatalength, &crt64->outputdatalength) || | 
|  | __put_user(compat_ptr(crt32k.bp_key), &crt64->bp_key)         || | 
|  | __put_user(compat_ptr(crt32k.bq_key), &crt64->bq_key)         || | 
|  | __put_user(compat_ptr(crt32k.np_prime), &crt64->np_prime)     || | 
|  | __put_user(compat_ptr(crt32k.nq_prime), &crt64->nq_prime)     || | 
|  | __put_user(compat_ptr(crt32k.u_mult_inv), &crt64->u_mult_inv)) | 
|  | return -EFAULT; | 
|  | ret = z90crypt_unlocked_ioctl(filp, cmd, (unsigned long)crt64); | 
|  | if (!ret) | 
|  | if (__get_user(i, &crt64->outputdatalength) || | 
|  | __put_user(i, &crt32u->outputdatalength)) | 
|  | ret = -EFAULT; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static long | 
|  | z90crypt_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) | 
|  | { | 
|  | switch (cmd) { | 
|  | case ICAZ90STATUS: | 
|  | case Z90QUIESCE: | 
|  | case Z90STAT_TOTALCOUNT: | 
|  | case Z90STAT_PCICACOUNT: | 
|  | case Z90STAT_PCICCCOUNT: | 
|  | case Z90STAT_PCIXCCCOUNT: | 
|  | case Z90STAT_PCIXCCMCL2COUNT: | 
|  | case Z90STAT_PCIXCCMCL3COUNT: | 
|  | case Z90STAT_CEX2CCOUNT: | 
|  | case Z90STAT_REQUESTQ_COUNT: | 
|  | case Z90STAT_PENDINGQ_COUNT: | 
|  | case Z90STAT_TOTALOPEN_COUNT: | 
|  | case Z90STAT_DOMAIN_INDEX: | 
|  | case Z90STAT_STATUS_MASK: | 
|  | case Z90STAT_QDEPTH_MASK: | 
|  | case Z90STAT_PERDEV_REQCNT: | 
|  | return z90crypt_unlocked_ioctl(filp, cmd, arg); | 
|  | case ICARSAMODEXPO: | 
|  | return trans_modexpo32(filp, cmd, arg); | 
|  | case ICARSACRT: | 
|  | return trans_modexpo_crt32(filp, cmd, arg); | 
|  | default: | 
|  | return -ENOIOCTLCMD; | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /** | 
|  | * The module initialization code. | 
|  | */ | 
|  | static int __init | 
|  | z90crypt_init_module(void) | 
|  | { | 
|  | int result, nresult; | 
|  | struct proc_dir_entry *entry; | 
|  |  | 
|  | PDEBUG("PID %d\n", PID()); | 
|  |  | 
|  | if ((domain < -1) || (domain > 15)) { | 
|  | PRINTKW("Invalid param: domain = %d.  Not loading.\n", domain); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | #ifndef Z90CRYPT_USE_HOTPLUG | 
|  | /* Register as misc device with given minor (or get a dynamic one). */ | 
|  | result = misc_register(&z90crypt_misc_device); | 
|  | if (result < 0) { | 
|  | PRINTKW(KERN_ERR "misc_register (minor %d) failed with %d\n", | 
|  | z90crypt_misc_device.minor, result); | 
|  | return result; | 
|  | } | 
|  | #else | 
|  | /* Register the major (or get a dynamic one). */ | 
|  | result = register_chrdev(z90crypt_major, REG_NAME, &z90crypt_fops); | 
|  | if (result < 0) { | 
|  | PRINTKW("register_chrdev (major %d) failed with %d.\n", | 
|  | z90crypt_major, result); | 
|  | return result; | 
|  | } | 
|  |  | 
|  | if (z90crypt_major == 0) | 
|  | z90crypt_major = result; | 
|  | #endif | 
|  |  | 
|  | PDEBUG("Registered " DEV_NAME " with result %d\n", result); | 
|  |  | 
|  | result = create_z90crypt(&domain); | 
|  | if (result != 0) { | 
|  | PRINTKW("create_z90crypt (domain index %d) failed with %d.\n", | 
|  | domain, result); | 
|  | result = -ENOMEM; | 
|  | goto init_module_cleanup; | 
|  | } | 
|  |  | 
|  | if (result == 0) { | 
|  | PRINTKN("Version %d.%d.%d loaded, built on %s %s\n", | 
|  | z90crypt_VERSION, z90crypt_RELEASE, z90crypt_VARIANT, | 
|  | __DATE__, __TIME__); | 
|  | PRINTKN("%s\n", z90main_version); | 
|  | PRINTKN("%s\n", z90hardware_version); | 
|  | PDEBUG("create_z90crypt (domain index %d) successful.\n", | 
|  | domain); | 
|  | } else | 
|  | PRINTK("No devices at startup\n"); | 
|  |  | 
|  | #ifdef Z90CRYPT_USE_HOTPLUG | 
|  | /* generate hotplug event for device node generation */ | 
|  | z90crypt_hotplug_event(z90crypt_major, 0, Z90CRYPT_HOTPLUG_ADD); | 
|  | #endif | 
|  |  | 
|  | /* Initialize globals. */ | 
|  | spin_lock_init(&queuespinlock); | 
|  |  | 
|  | INIT_LIST_HEAD(&pending_list); | 
|  | pendingq_count = 0; | 
|  |  | 
|  | INIT_LIST_HEAD(&request_list); | 
|  | requestq_count = 0; | 
|  |  | 
|  | quiesce_z90crypt = 0; | 
|  |  | 
|  | atomic_set(&total_open, 0); | 
|  | atomic_set(&z90crypt_step, 0); | 
|  |  | 
|  | /* Set up the cleanup task. */ | 
|  | init_timer(&cleanup_timer); | 
|  | cleanup_timer.function = z90crypt_cleanup_task; | 
|  | cleanup_timer.data = 0; | 
|  | cleanup_timer.expires = jiffies + (CLEANUPTIME * HZ); | 
|  | add_timer(&cleanup_timer); | 
|  |  | 
|  | /* Set up the proc file system */ | 
|  | entry = create_proc_entry("driver/z90crypt", 0644, 0); | 
|  | if (entry) { | 
|  | entry->nlink = 1; | 
|  | entry->data = 0; | 
|  | entry->read_proc = z90crypt_status; | 
|  | entry->write_proc = z90crypt_status_write; | 
|  | } | 
|  | else | 
|  | PRINTK("Couldn't create z90crypt proc entry\n"); | 
|  | z90crypt_entry = entry; | 
|  |  | 
|  | /* Set up the configuration task. */ | 
|  | init_timer(&config_timer); | 
|  | config_timer.function = z90crypt_config_task; | 
|  | config_timer.data = 0; | 
|  | config_timer.expires = jiffies + (INITIAL_CONFIGTIME * HZ); | 
|  | add_timer(&config_timer); | 
|  |  | 
|  | /* Set up the reader task */ | 
|  | tasklet_init(&reader_tasklet, z90crypt_reader_task, 0); | 
|  | init_timer(&reader_timer); | 
|  | reader_timer.function = z90crypt_schedule_reader_task; | 
|  | reader_timer.data = 0; | 
|  | reader_timer.expires = jiffies + (READERTIME * HZ / 1000); | 
|  | add_timer(&reader_timer); | 
|  |  | 
|  | return 0; // success | 
|  |  | 
|  | init_module_cleanup: | 
|  | #ifndef Z90CRYPT_USE_HOTPLUG | 
|  | if ((nresult = misc_deregister(&z90crypt_misc_device))) | 
|  | PRINTK("misc_deregister failed with %d.\n", nresult); | 
|  | else | 
|  | PDEBUG("misc_deregister successful.\n"); | 
|  | #else | 
|  | if ((nresult = unregister_chrdev(z90crypt_major, REG_NAME))) | 
|  | PRINTK("unregister_chrdev failed with %d.\n", nresult); | 
|  | else | 
|  | PDEBUG("unregister_chrdev successful.\n"); | 
|  | #endif | 
|  |  | 
|  | return result; // failure | 
|  | } | 
|  |  | 
|  | /** | 
|  | * The module termination code | 
|  | */ | 
|  | static void __exit | 
|  | z90crypt_cleanup_module(void) | 
|  | { | 
|  | int nresult; | 
|  |  | 
|  | PDEBUG("PID %d\n", PID()); | 
|  |  | 
|  | remove_proc_entry("driver/z90crypt", 0); | 
|  |  | 
|  | #ifndef Z90CRYPT_USE_HOTPLUG | 
|  | if ((nresult = misc_deregister(&z90crypt_misc_device))) | 
|  | PRINTK("misc_deregister failed with %d.\n", nresult); | 
|  | else | 
|  | PDEBUG("misc_deregister successful.\n"); | 
|  | #else | 
|  | z90crypt_hotplug_event(z90crypt_major, 0, Z90CRYPT_HOTPLUG_REMOVE); | 
|  |  | 
|  | if ((nresult = unregister_chrdev(z90crypt_major, REG_NAME))) | 
|  | PRINTK("unregister_chrdev failed with %d.\n", nresult); | 
|  | else | 
|  | PDEBUG("unregister_chrdev successful.\n"); | 
|  | #endif | 
|  |  | 
|  | /* Remove the tasks */ | 
|  | tasklet_kill(&reader_tasklet); | 
|  | del_timer(&reader_timer); | 
|  | del_timer(&config_timer); | 
|  | del_timer(&cleanup_timer); | 
|  |  | 
|  | destroy_z90crypt(); | 
|  |  | 
|  | PRINTKN("Unloaded.\n"); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Functions running under a process id | 
|  | * | 
|  | * The I/O functions: | 
|  | *     z90crypt_open | 
|  | *     z90crypt_release | 
|  | *     z90crypt_read | 
|  | *     z90crypt_write | 
|  | *     z90crypt_unlocked_ioctl | 
|  | *     z90crypt_status | 
|  | *     z90crypt_status_write | 
|  | *	 disable_card | 
|  | *	 enable_card | 
|  | *	 scan_char | 
|  | *	 scan_string | 
|  | * | 
|  | * Helper functions: | 
|  | *     z90crypt_rsa | 
|  | *	 z90crypt_prepare | 
|  | *	 z90crypt_send | 
|  | *	 z90crypt_process_results | 
|  | * | 
|  | */ | 
|  | static int | 
|  | z90crypt_open(struct inode *inode, struct file *filp) | 
|  | { | 
|  | struct priv_data *private_data_p; | 
|  |  | 
|  | if (quiesce_z90crypt) | 
|  | return -EQUIESCE; | 
|  |  | 
|  | private_data_p = kmalloc(sizeof(struct priv_data), GFP_KERNEL); | 
|  | if (!private_data_p) { | 
|  | PRINTK("Memory allocate failed\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | memset((void *)private_data_p, 0, sizeof(struct priv_data)); | 
|  | private_data_p->status = STAT_OPEN; | 
|  | private_data_p->opener_pid = PID(); | 
|  | filp->private_data = private_data_p; | 
|  | atomic_inc(&total_open); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | z90crypt_release(struct inode *inode, struct file *filp) | 
|  | { | 
|  | struct priv_data *private_data_p = filp->private_data; | 
|  |  | 
|  | PDEBUG("PID %d (filp %p)\n", PID(), filp); | 
|  |  | 
|  | private_data_p->status = STAT_CLOSED; | 
|  | memset(private_data_p, 0, sizeof(struct priv_data)); | 
|  | kfree(private_data_p); | 
|  | atomic_dec(&total_open); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * there are two read functions, of which compile options will choose one | 
|  | * without USE_GET_RANDOM_BYTES | 
|  | *   => read() always returns -EPERM; | 
|  | * otherwise | 
|  | *   => read() uses get_random_bytes() kernel function | 
|  | */ | 
|  | #ifndef USE_GET_RANDOM_BYTES | 
|  | /** | 
|  | * z90crypt_read will not be supported beyond z90crypt 1.3.1 | 
|  | */ | 
|  | static ssize_t | 
|  | z90crypt_read(struct file *filp, char __user *buf, size_t count, loff_t *f_pos) | 
|  | { | 
|  | PDEBUG("filp %p (PID %d)\n", filp, PID()); | 
|  | return -EPERM; | 
|  | } | 
|  | #else // we want to use get_random_bytes | 
|  | /** | 
|  | * read() just returns a string of random bytes.  Since we have no way | 
|  | * to generate these cryptographically, we just execute get_random_bytes | 
|  | * for the length specified. | 
|  | */ | 
|  | #include <linux/random.h> | 
|  | static ssize_t | 
|  | z90crypt_read(struct file *filp, char __user *buf, size_t count, loff_t *f_pos) | 
|  | { | 
|  | unsigned char *temp_buff; | 
|  |  | 
|  | PDEBUG("filp %p (PID %d)\n", filp, PID()); | 
|  |  | 
|  | if (quiesce_z90crypt) | 
|  | return -EQUIESCE; | 
|  | if (count < 0) { | 
|  | PRINTK("Requested random byte count negative: %ld\n", count); | 
|  | return -EINVAL; | 
|  | } | 
|  | if (count > RESPBUFFSIZE) { | 
|  | PDEBUG("count[%d] > RESPBUFFSIZE", count); | 
|  | return -EINVAL; | 
|  | } | 
|  | if (count == 0) | 
|  | return 0; | 
|  | temp_buff = kmalloc(RESPBUFFSIZE, GFP_KERNEL); | 
|  | if (!temp_buff) { | 
|  | PRINTK("Memory allocate failed\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  | get_random_bytes(temp_buff, count); | 
|  |  | 
|  | if (copy_to_user(buf, temp_buff, count) != 0) { | 
|  | kfree(temp_buff); | 
|  | return -EFAULT; | 
|  | } | 
|  | kfree(temp_buff); | 
|  | return count; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /** | 
|  | * Write is is not allowed | 
|  | */ | 
|  | static ssize_t | 
|  | z90crypt_write(struct file *filp, const char __user *buf, size_t count, loff_t *f_pos) | 
|  | { | 
|  | PDEBUG("filp %p (PID %d)\n", filp, PID()); | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * New status functions | 
|  | */ | 
|  | static inline int | 
|  | get_status_totalcount(void) | 
|  | { | 
|  | return z90crypt.hdware_info->hdware_mask.st_count; | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | get_status_PCICAcount(void) | 
|  | { | 
|  | return z90crypt.hdware_info->type_mask[PCICA].st_count; | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | get_status_PCICCcount(void) | 
|  | { | 
|  | return z90crypt.hdware_info->type_mask[PCICC].st_count; | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | get_status_PCIXCCcount(void) | 
|  | { | 
|  | return z90crypt.hdware_info->type_mask[PCIXCC_MCL2].st_count + | 
|  | z90crypt.hdware_info->type_mask[PCIXCC_MCL3].st_count; | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | get_status_PCIXCCMCL2count(void) | 
|  | { | 
|  | return z90crypt.hdware_info->type_mask[PCIXCC_MCL2].st_count; | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | get_status_PCIXCCMCL3count(void) | 
|  | { | 
|  | return z90crypt.hdware_info->type_mask[PCIXCC_MCL3].st_count; | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | get_status_CEX2Ccount(void) | 
|  | { | 
|  | return z90crypt.hdware_info->type_mask[CEX2C].st_count; | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | get_status_requestq_count(void) | 
|  | { | 
|  | return requestq_count; | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | get_status_pendingq_count(void) | 
|  | { | 
|  | return pendingq_count; | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | get_status_totalopen_count(void) | 
|  | { | 
|  | return atomic_read(&total_open); | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | get_status_domain_index(void) | 
|  | { | 
|  | return z90crypt.cdx; | 
|  | } | 
|  |  | 
|  | static inline unsigned char * | 
|  | get_status_status_mask(unsigned char status[Z90CRYPT_NUM_APS]) | 
|  | { | 
|  | int i, ix; | 
|  |  | 
|  | memcpy(status, z90crypt.hdware_info->device_type_array, | 
|  | Z90CRYPT_NUM_APS); | 
|  |  | 
|  | for (i = 0; i < get_status_totalcount(); i++) { | 
|  | ix = SHRT2LONG(i); | 
|  | if (LONG2DEVPTR(ix)->user_disabled) | 
|  | status[ix] = 0x0d; | 
|  | } | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static inline unsigned char * | 
|  | get_status_qdepth_mask(unsigned char qdepth[Z90CRYPT_NUM_APS]) | 
|  | { | 
|  | int i, ix; | 
|  |  | 
|  | memset(qdepth, 0, Z90CRYPT_NUM_APS); | 
|  |  | 
|  | for (i = 0; i < get_status_totalcount(); i++) { | 
|  | ix = SHRT2LONG(i); | 
|  | qdepth[ix] = LONG2DEVPTR(ix)->dev_caller_count; | 
|  | } | 
|  |  | 
|  | return qdepth; | 
|  | } | 
|  |  | 
|  | static inline unsigned int * | 
|  | get_status_perdevice_reqcnt(unsigned int reqcnt[Z90CRYPT_NUM_APS]) | 
|  | { | 
|  | int i, ix; | 
|  |  | 
|  | memset(reqcnt, 0, Z90CRYPT_NUM_APS * sizeof(int)); | 
|  |  | 
|  | for (i = 0; i < get_status_totalcount(); i++) { | 
|  | ix = SHRT2LONG(i); | 
|  | reqcnt[ix] = LONG2DEVPTR(ix)->dev_total_req_cnt; | 
|  | } | 
|  |  | 
|  | return reqcnt; | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | init_work_element(struct work_element *we_p, | 
|  | struct priv_data *priv_data, pid_t pid) | 
|  | { | 
|  | int step; | 
|  |  | 
|  | we_p->requestptr = (unsigned char *)we_p + sizeof(struct work_element); | 
|  | /* Come up with a unique id for this caller. */ | 
|  | step = atomic_inc_return(&z90crypt_step); | 
|  | memcpy(we_p->caller_id+0, (void *) &pid, sizeof(pid)); | 
|  | memcpy(we_p->caller_id+4, (void *) &step, sizeof(step)); | 
|  | we_p->pid = pid; | 
|  | we_p->priv_data = priv_data; | 
|  | we_p->status[0] = STAT_DEFAULT; | 
|  | we_p->audit[0] = 0x00; | 
|  | we_p->audit[1] = 0x00; | 
|  | we_p->audit[2] = 0x00; | 
|  | we_p->resp_buff_size = 0; | 
|  | we_p->retcode = 0; | 
|  | we_p->devindex = -1; | 
|  | we_p->devtype = -1; | 
|  | atomic_set(&we_p->alarmrung, 0); | 
|  | init_waitqueue_head(&we_p->waitq); | 
|  | INIT_LIST_HEAD(&(we_p->liste)); | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | allocate_work_element(struct work_element **we_pp, | 
|  | struct priv_data *priv_data_p, pid_t pid) | 
|  | { | 
|  | struct work_element *we_p; | 
|  |  | 
|  | we_p = (struct work_element *) get_zeroed_page(GFP_KERNEL); | 
|  | if (!we_p) | 
|  | return -ENOMEM; | 
|  | init_work_element(we_p, priv_data_p, pid); | 
|  | *we_pp = we_p; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | remove_device(struct device *device_p) | 
|  | { | 
|  | if (!device_p || (device_p->disabled != 0)) | 
|  | return; | 
|  | device_p->disabled = 1; | 
|  | z90crypt.hdware_info->type_mask[device_p->dev_type].disabled_count++; | 
|  | z90crypt.hdware_info->hdware_mask.disabled_count++; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Bitlength limits for each card | 
|  | * | 
|  | * There are new MCLs which allow more bitlengths. See the table for details. | 
|  | * The MCL must be applied and the newer bitlengths enabled for these to work. | 
|  | * | 
|  | * Card Type    Old limit    New limit | 
|  | * PCICC         512-1024     512-2048 | 
|  | * PCIXCC_MCL2   512-2048     no change (applying this MCL == card is MCL3+) | 
|  | * PCIXCC_MCL3   512-2048     128-2048 | 
|  | * CEX2C         512-2048     128-2048 | 
|  | * | 
|  | * ext_bitlens (extended bitlengths) is a global, since you should not apply an | 
|  | * MCL to just one card in a machine. We assume, at first, that all cards have | 
|  | * these capabilities. | 
|  | */ | 
|  | int ext_bitlens = 1; // This is global | 
|  | #define PCIXCC_MIN_MOD_SIZE	 16	//  128 bits | 
|  | #define OLD_PCIXCC_MIN_MOD_SIZE	 64	//  512 bits | 
|  | #define PCICC_MIN_MOD_SIZE	 64	//  512 bits | 
|  | #define OLD_PCICC_MAX_MOD_SIZE	128	// 1024 bits | 
|  | #define MAX_MOD_SIZE		256	// 2048 bits | 
|  |  | 
|  | static inline int | 
|  | select_device_type(int *dev_type_p, int bytelength) | 
|  | { | 
|  | static int count = 0; | 
|  | int PCICA_avail, PCIXCC_MCL3_avail, CEX2C_avail, index_to_use; | 
|  | struct status *stat; | 
|  | if ((*dev_type_p != PCICC) && (*dev_type_p != PCICA) && | 
|  | (*dev_type_p != PCIXCC_MCL2) && (*dev_type_p != PCIXCC_MCL3) && | 
|  | (*dev_type_p != CEX2C) && (*dev_type_p != ANYDEV)) | 
|  | return -1; | 
|  | if (*dev_type_p != ANYDEV) { | 
|  | stat = &z90crypt.hdware_info->type_mask[*dev_type_p]; | 
|  | if (stat->st_count > | 
|  | (stat->disabled_count + stat->user_disabled_count)) | 
|  | return 0; | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | /* Assumption: PCICA, PCIXCC_MCL3, and CEX2C are all similar in speed */ | 
|  | stat = &z90crypt.hdware_info->type_mask[PCICA]; | 
|  | PCICA_avail = stat->st_count - | 
|  | (stat->disabled_count + stat->user_disabled_count); | 
|  | stat = &z90crypt.hdware_info->type_mask[PCIXCC_MCL3]; | 
|  | PCIXCC_MCL3_avail = stat->st_count - | 
|  | (stat->disabled_count + stat->user_disabled_count); | 
|  | stat = &z90crypt.hdware_info->type_mask[CEX2C]; | 
|  | CEX2C_avail = stat->st_count - | 
|  | (stat->disabled_count + stat->user_disabled_count); | 
|  | if (PCICA_avail || PCIXCC_MCL3_avail || CEX2C_avail) { | 
|  | /** | 
|  | * bitlength is a factor, PCICA is the most capable, even with | 
|  | * the new MCL. | 
|  | */ | 
|  | if ((bytelength < PCIXCC_MIN_MOD_SIZE) || | 
|  | (!ext_bitlens && (bytelength < OLD_PCIXCC_MIN_MOD_SIZE))) { | 
|  | if (!PCICA_avail) | 
|  | return -1; | 
|  | else { | 
|  | *dev_type_p = PCICA; | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | index_to_use = count % (PCICA_avail + PCIXCC_MCL3_avail + | 
|  | CEX2C_avail); | 
|  | if (index_to_use < PCICA_avail) | 
|  | *dev_type_p = PCICA; | 
|  | else if (index_to_use < (PCICA_avail + PCIXCC_MCL3_avail)) | 
|  | *dev_type_p = PCIXCC_MCL3; | 
|  | else | 
|  | *dev_type_p = CEX2C; | 
|  | count++; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Less than OLD_PCIXCC_MIN_MOD_SIZE cannot go to a PCIXCC_MCL2 */ | 
|  | if (bytelength < OLD_PCIXCC_MIN_MOD_SIZE) | 
|  | return -1; | 
|  | stat = &z90crypt.hdware_info->type_mask[PCIXCC_MCL2]; | 
|  | if (stat->st_count > | 
|  | (stat->disabled_count + stat->user_disabled_count)) { | 
|  | *dev_type_p = PCIXCC_MCL2; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Less than PCICC_MIN_MOD_SIZE or more than OLD_PCICC_MAX_MOD_SIZE | 
|  | * (if we don't have the MCL applied and the newer bitlengths enabled) | 
|  | * cannot go to a PCICC | 
|  | */ | 
|  | if ((bytelength < PCICC_MIN_MOD_SIZE) || | 
|  | (!ext_bitlens && (bytelength > OLD_PCICC_MAX_MOD_SIZE))) { | 
|  | return -1; | 
|  | } | 
|  | stat = &z90crypt.hdware_info->type_mask[PCICC]; | 
|  | if (stat->st_count > | 
|  | (stat->disabled_count + stat->user_disabled_count)) { | 
|  | *dev_type_p = PCICC; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Try the selected number, then the selected type (can be ANYDEV) | 
|  | */ | 
|  | static inline int | 
|  | select_device(int *dev_type_p, int *device_nr_p, int bytelength) | 
|  | { | 
|  | int i, indx, devTp, low_count, low_indx; | 
|  | struct device_x *index_p; | 
|  | struct device *dev_ptr; | 
|  |  | 
|  | PDEBUG("device type = %d, index = %d\n", *dev_type_p, *device_nr_p); | 
|  | if ((*device_nr_p >= 0) && (*device_nr_p < Z90CRYPT_NUM_DEVS)) { | 
|  | PDEBUG("trying index = %d\n", *device_nr_p); | 
|  | dev_ptr = z90crypt.device_p[*device_nr_p]; | 
|  |  | 
|  | if (dev_ptr && | 
|  | (dev_ptr->dev_stat != DEV_GONE) && | 
|  | (dev_ptr->disabled == 0) && | 
|  | (dev_ptr->user_disabled == 0)) { | 
|  | PDEBUG("selected by number, index = %d\n", | 
|  | *device_nr_p); | 
|  | *dev_type_p = dev_ptr->dev_type; | 
|  | return *device_nr_p; | 
|  | } | 
|  | } | 
|  | *device_nr_p = -1; | 
|  | PDEBUG("trying type = %d\n", *dev_type_p); | 
|  | devTp = *dev_type_p; | 
|  | if (select_device_type(&devTp, bytelength) == -1) { | 
|  | PDEBUG("failed to select by type\n"); | 
|  | return -1; | 
|  | } | 
|  | PDEBUG("selected type = %d\n", devTp); | 
|  | index_p = &z90crypt.hdware_info->type_x_addr[devTp]; | 
|  | low_count = 0x0000FFFF; | 
|  | low_indx = -1; | 
|  | for (i = 0; i < z90crypt.hdware_info->type_mask[devTp].st_count; i++) { | 
|  | indx = index_p->device_index[i]; | 
|  | dev_ptr = z90crypt.device_p[indx]; | 
|  | if (dev_ptr && | 
|  | (dev_ptr->dev_stat != DEV_GONE) && | 
|  | (dev_ptr->disabled == 0) && | 
|  | (dev_ptr->user_disabled == 0) && | 
|  | (devTp == dev_ptr->dev_type) && | 
|  | (low_count > dev_ptr->dev_caller_count)) { | 
|  | low_count = dev_ptr->dev_caller_count; | 
|  | low_indx = indx; | 
|  | } | 
|  | } | 
|  | *device_nr_p = low_indx; | 
|  | return low_indx; | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | send_to_crypto_device(struct work_element *we_p) | 
|  | { | 
|  | struct caller *caller_p; | 
|  | struct device *device_p; | 
|  | int dev_nr; | 
|  | int bytelen = ((struct ica_rsa_modexpo *)we_p->buffer)->inputdatalength; | 
|  |  | 
|  | if (!we_p->requestptr) | 
|  | return SEN_FATAL_ERROR; | 
|  | caller_p = (struct caller *)we_p->requestptr; | 
|  | dev_nr = we_p->devindex; | 
|  | if (select_device(&we_p->devtype, &dev_nr, bytelen) == -1) { | 
|  | if (z90crypt.hdware_info->hdware_mask.st_count != 0) | 
|  | return SEN_RETRY; | 
|  | else | 
|  | return SEN_NOT_AVAIL; | 
|  | } | 
|  | we_p->devindex = dev_nr; | 
|  | device_p = z90crypt.device_p[dev_nr]; | 
|  | if (!device_p) | 
|  | return SEN_NOT_AVAIL; | 
|  | if (device_p->dev_type != we_p->devtype) | 
|  | return SEN_RETRY; | 
|  | if (device_p->dev_caller_count >= device_p->dev_q_depth) | 
|  | return SEN_QUEUE_FULL; | 
|  | PDEBUG("device number prior to send: %d\n", dev_nr); | 
|  | switch (send_to_AP(dev_nr, z90crypt.cdx, | 
|  | caller_p->caller_dev_dep_req_l, | 
|  | caller_p->caller_dev_dep_req_p)) { | 
|  | case DEV_SEN_EXCEPTION: | 
|  | PRINTKC("Exception during send to device %d\n", dev_nr); | 
|  | z90crypt.terminating = 1; | 
|  | return SEN_FATAL_ERROR; | 
|  | case DEV_GONE: | 
|  | PRINTK("Device %d not available\n", dev_nr); | 
|  | remove_device(device_p); | 
|  | return SEN_NOT_AVAIL; | 
|  | case DEV_EMPTY: | 
|  | return SEN_NOT_AVAIL; | 
|  | case DEV_NO_WORK: | 
|  | return SEN_FATAL_ERROR; | 
|  | case DEV_BAD_MESSAGE: | 
|  | return SEN_USER_ERROR; | 
|  | case DEV_QUEUE_FULL: | 
|  | return SEN_QUEUE_FULL; | 
|  | default: | 
|  | case DEV_ONLINE: | 
|  | break; | 
|  | } | 
|  | list_add_tail(&(caller_p->caller_liste), &(device_p->dev_caller_list)); | 
|  | device_p->dev_caller_count++; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Send puts the user's work on one of two queues: | 
|  | *   the pending queue if the send was successful | 
|  | *   the request queue if the send failed because device full or busy | 
|  | */ | 
|  | static inline int | 
|  | z90crypt_send(struct work_element *we_p, const char *buf) | 
|  | { | 
|  | int rv; | 
|  |  | 
|  | PDEBUG("PID %d\n", PID()); | 
|  |  | 
|  | if (CHK_RDWRMASK(we_p->status[0]) != STAT_NOWORK) { | 
|  | PDEBUG("PID %d tried to send more work but has outstanding " | 
|  | "work.\n", PID()); | 
|  | return -EWORKPEND; | 
|  | } | 
|  | we_p->devindex = -1; // Reset device number | 
|  | spin_lock_irq(&queuespinlock); | 
|  | rv = send_to_crypto_device(we_p); | 
|  | switch (rv) { | 
|  | case 0: | 
|  | we_p->requestsent = jiffies; | 
|  | we_p->audit[0] |= FP_SENT; | 
|  | list_add_tail(&we_p->liste, &pending_list); | 
|  | ++pendingq_count; | 
|  | we_p->audit[0] |= FP_PENDING; | 
|  | break; | 
|  | case SEN_BUSY: | 
|  | case SEN_QUEUE_FULL: | 
|  | rv = 0; | 
|  | we_p->devindex = -1; // any device will do | 
|  | we_p->requestsent = jiffies; | 
|  | list_add_tail(&we_p->liste, &request_list); | 
|  | ++requestq_count; | 
|  | we_p->audit[0] |= FP_REQUEST; | 
|  | break; | 
|  | case SEN_RETRY: | 
|  | rv = -ERESTARTSYS; | 
|  | break; | 
|  | case SEN_NOT_AVAIL: | 
|  | PRINTK("*** No devices available.\n"); | 
|  | rv = we_p->retcode = -ENODEV; | 
|  | we_p->status[0] |= STAT_FAILED; | 
|  | break; | 
|  | case REC_OPERAND_INV: | 
|  | case REC_OPERAND_SIZE: | 
|  | case REC_EVEN_MOD: | 
|  | case REC_INVALID_PAD: | 
|  | rv = we_p->retcode = -EINVAL; | 
|  | we_p->status[0] |= STAT_FAILED; | 
|  | break; | 
|  | default: | 
|  | we_p->retcode = rv; | 
|  | we_p->status[0] |= STAT_FAILED; | 
|  | break; | 
|  | } | 
|  | if (rv != -ERESTARTSYS) | 
|  | SET_RDWRMASK(we_p->status[0], STAT_WRITTEN); | 
|  | spin_unlock_irq(&queuespinlock); | 
|  | if (rv == 0) | 
|  | tasklet_schedule(&reader_tasklet); | 
|  | return rv; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * process_results copies the user's work from kernel space. | 
|  | */ | 
|  | static inline int | 
|  | z90crypt_process_results(struct work_element *we_p, char __user *buf) | 
|  | { | 
|  | int rv; | 
|  |  | 
|  | PDEBUG("we_p %p (PID %d)\n", we_p, PID()); | 
|  |  | 
|  | LONG2DEVPTR(we_p->devindex)->dev_total_req_cnt++; | 
|  | SET_RDWRMASK(we_p->status[0], STAT_READPEND); | 
|  |  | 
|  | rv = 0; | 
|  | if (!we_p->buffer) { | 
|  | PRINTK("we_p %p PID %d in STAT_READPEND: buffer NULL.\n", | 
|  | we_p, PID()); | 
|  | rv = -ENOBUFF; | 
|  | } | 
|  |  | 
|  | if (!rv) | 
|  | if ((rv = copy_to_user(buf, we_p->buffer, we_p->buff_size))) { | 
|  | PDEBUG("copy_to_user failed: rv = %d\n", rv); | 
|  | rv = -EFAULT; | 
|  | } | 
|  |  | 
|  | if (!rv) | 
|  | rv = we_p->retcode; | 
|  | if (!rv) | 
|  | if (we_p->resp_buff_size | 
|  | &&	copy_to_user(we_p->resp_addr, we_p->resp_buff, | 
|  | we_p->resp_buff_size)) | 
|  | rv = -EFAULT; | 
|  |  | 
|  | SET_RDWRMASK(we_p->status[0], STAT_NOWORK); | 
|  | return rv; | 
|  | } | 
|  |  | 
|  | static unsigned char NULL_psmid[8] = | 
|  | {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; | 
|  |  | 
|  | /** | 
|  | * Used in device configuration functions | 
|  | */ | 
|  | #define MAX_RESET 90 | 
|  |  | 
|  | /** | 
|  | * This is used only for PCICC support | 
|  | */ | 
|  | static inline int | 
|  | is_PKCS11_padded(unsigned char *buffer, int length) | 
|  | { | 
|  | int i; | 
|  | if ((buffer[0] != 0x00) || (buffer[1] != 0x01)) | 
|  | return 0; | 
|  | for (i = 2; i < length; i++) | 
|  | if (buffer[i] != 0xFF) | 
|  | break; | 
|  | if ((i < 10) || (i == length)) | 
|  | return 0; | 
|  | if (buffer[i] != 0x00) | 
|  | return 0; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * This is used only for PCICC support | 
|  | */ | 
|  | static inline int | 
|  | is_PKCS12_padded(unsigned char *buffer, int length) | 
|  | { | 
|  | int i; | 
|  | if ((buffer[0] != 0x00) || (buffer[1] != 0x02)) | 
|  | return 0; | 
|  | for (i = 2; i < length; i++) | 
|  | if (buffer[i] == 0x00) | 
|  | break; | 
|  | if ((i < 10) || (i == length)) | 
|  | return 0; | 
|  | if (buffer[i] != 0x00) | 
|  | return 0; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * builds struct caller and converts message from generic format to | 
|  | * device-dependent format | 
|  | * func is ICARSAMODEXPO or ICARSACRT | 
|  | * function is PCI_FUNC_KEY_ENCRYPT or PCI_FUNC_KEY_DECRYPT | 
|  | */ | 
|  | static inline int | 
|  | build_caller(struct work_element *we_p, short function) | 
|  | { | 
|  | int rv; | 
|  | struct caller *caller_p = (struct caller *)we_p->requestptr; | 
|  |  | 
|  | if ((we_p->devtype != PCICC) && (we_p->devtype != PCICA) && | 
|  | (we_p->devtype != PCIXCC_MCL2) && (we_p->devtype != PCIXCC_MCL3) && | 
|  | (we_p->devtype != CEX2C)) | 
|  | return SEN_NOT_AVAIL; | 
|  |  | 
|  | memcpy(caller_p->caller_id, we_p->caller_id, | 
|  | sizeof(caller_p->caller_id)); | 
|  | caller_p->caller_dev_dep_req_p = caller_p->caller_dev_dep_req; | 
|  | caller_p->caller_dev_dep_req_l = MAX_RESPONSE_SIZE; | 
|  | caller_p->caller_buf_p = we_p->buffer; | 
|  | INIT_LIST_HEAD(&(caller_p->caller_liste)); | 
|  |  | 
|  | rv = convert_request(we_p->buffer, we_p->funccode, function, | 
|  | z90crypt.cdx, we_p->devtype, | 
|  | &caller_p->caller_dev_dep_req_l, | 
|  | caller_p->caller_dev_dep_req_p); | 
|  | if (rv) { | 
|  | if (rv == SEN_NOT_AVAIL) | 
|  | PDEBUG("request can't be processed on hdwr avail\n"); | 
|  | else | 
|  | PRINTK("Error from convert_request: %d\n", rv); | 
|  | } | 
|  | else | 
|  | memcpy(&(caller_p->caller_dev_dep_req_p[4]), we_p->caller_id,8); | 
|  | return rv; | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | unbuild_caller(struct device *device_p, struct caller *caller_p) | 
|  | { | 
|  | if (!caller_p) | 
|  | return; | 
|  | if (caller_p->caller_liste.next && caller_p->caller_liste.prev) | 
|  | if (!list_empty(&caller_p->caller_liste)) { | 
|  | list_del_init(&caller_p->caller_liste); | 
|  | device_p->dev_caller_count--; | 
|  | } | 
|  | memset(caller_p->caller_id, 0, sizeof(caller_p->caller_id)); | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | get_crypto_request_buffer(struct work_element *we_p) | 
|  | { | 
|  | struct ica_rsa_modexpo *mex_p; | 
|  | struct ica_rsa_modexpo_crt *crt_p; | 
|  | unsigned char *temp_buffer; | 
|  | short function; | 
|  | int rv; | 
|  |  | 
|  | mex_p =	(struct ica_rsa_modexpo *) we_p->buffer; | 
|  | crt_p = (struct ica_rsa_modexpo_crt *) we_p->buffer; | 
|  |  | 
|  | PDEBUG("device type input = %d\n", we_p->devtype); | 
|  |  | 
|  | if (z90crypt.terminating) | 
|  | return REC_NO_RESPONSE; | 
|  | if (memcmp(we_p->caller_id, NULL_psmid, 8) == 0) { | 
|  | PRINTK("psmid zeroes\n"); | 
|  | return SEN_FATAL_ERROR; | 
|  | } | 
|  | if (!we_p->buffer) { | 
|  | PRINTK("buffer pointer NULL\n"); | 
|  | return SEN_USER_ERROR; | 
|  | } | 
|  | if (!we_p->requestptr) { | 
|  | PRINTK("caller pointer NULL\n"); | 
|  | return SEN_USER_ERROR; | 
|  | } | 
|  |  | 
|  | if ((we_p->devtype != PCICA) && (we_p->devtype != PCICC) && | 
|  | (we_p->devtype != PCIXCC_MCL2) && (we_p->devtype != PCIXCC_MCL3) && | 
|  | (we_p->devtype != CEX2C) && (we_p->devtype != ANYDEV)) { | 
|  | PRINTK("invalid device type\n"); | 
|  | return SEN_USER_ERROR; | 
|  | } | 
|  |  | 
|  | if ((mex_p->inputdatalength < 1) || | 
|  | (mex_p->inputdatalength > MAX_MOD_SIZE)) { | 
|  | PRINTK("inputdatalength[%d] is not valid\n", | 
|  | mex_p->inputdatalength); | 
|  | return SEN_USER_ERROR; | 
|  | } | 
|  |  | 
|  | if (mex_p->outputdatalength < mex_p->inputdatalength) { | 
|  | PRINTK("outputdatalength[%d] < inputdatalength[%d]\n", | 
|  | mex_p->outputdatalength, mex_p->inputdatalength); | 
|  | return SEN_USER_ERROR; | 
|  | } | 
|  |  | 
|  | if (!mex_p->inputdata || !mex_p->outputdata) { | 
|  | PRINTK("inputdata[%p] or outputdata[%p] is NULL\n", | 
|  | mex_p->outputdata, mex_p->inputdata); | 
|  | return SEN_USER_ERROR; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * As long as outputdatalength is big enough, we can set the | 
|  | * outputdatalength equal to the inputdatalength, since that is the | 
|  | * number of bytes we will copy in any case | 
|  | */ | 
|  | mex_p->outputdatalength = mex_p->inputdatalength; | 
|  |  | 
|  | rv = 0; | 
|  | switch (we_p->funccode) { | 
|  | case ICARSAMODEXPO: | 
|  | if (!mex_p->b_key || !mex_p->n_modulus) | 
|  | rv = SEN_USER_ERROR; | 
|  | break; | 
|  | case ICARSACRT: | 
|  | if (!IS_EVEN(crt_p->inputdatalength)) { | 
|  | PRINTK("inputdatalength[%d] is odd, CRT form\n", | 
|  | crt_p->inputdatalength); | 
|  | rv = SEN_USER_ERROR; | 
|  | break; | 
|  | } | 
|  | if (!crt_p->bp_key || | 
|  | !crt_p->bq_key || | 
|  | !crt_p->np_prime || | 
|  | !crt_p->nq_prime || | 
|  | !crt_p->u_mult_inv) { | 
|  | PRINTK("CRT form, bad data: %p/%p/%p/%p/%p\n", | 
|  | crt_p->bp_key, crt_p->bq_key, | 
|  | crt_p->np_prime, crt_p->nq_prime, | 
|  | crt_p->u_mult_inv); | 
|  | rv = SEN_USER_ERROR; | 
|  | } | 
|  | break; | 
|  | default: | 
|  | PRINTK("bad func = %d\n", we_p->funccode); | 
|  | rv = SEN_USER_ERROR; | 
|  | break; | 
|  | } | 
|  | if (rv != 0) | 
|  | return rv; | 
|  |  | 
|  | if (select_device_type(&we_p->devtype, mex_p->inputdatalength) < 0) | 
|  | return SEN_NOT_AVAIL; | 
|  |  | 
|  | temp_buffer = (unsigned char *)we_p + sizeof(struct work_element) + | 
|  | sizeof(struct caller); | 
|  | if (copy_from_user(temp_buffer, mex_p->inputdata, | 
|  | mex_p->inputdatalength) != 0) | 
|  | return SEN_RELEASED; | 
|  |  | 
|  | function = PCI_FUNC_KEY_ENCRYPT; | 
|  | switch (we_p->devtype) { | 
|  | /* PCICA does everything with a simple RSA mod-expo operation */ | 
|  | case PCICA: | 
|  | function = PCI_FUNC_KEY_ENCRYPT; | 
|  | break; | 
|  | /** | 
|  | * PCIXCC_MCL2 does all Mod-Expo form with a simple RSA mod-expo | 
|  | * operation, and all CRT forms with a PKCS-1.2 format decrypt. | 
|  | * PCIXCC_MCL3 and CEX2C do all Mod-Expo and CRT forms with a simple RSA | 
|  | * mod-expo operation | 
|  | */ | 
|  | case PCIXCC_MCL2: | 
|  | if (we_p->funccode == ICARSAMODEXPO) | 
|  | function = PCI_FUNC_KEY_ENCRYPT; | 
|  | else | 
|  | function = PCI_FUNC_KEY_DECRYPT; | 
|  | break; | 
|  | case PCIXCC_MCL3: | 
|  | case CEX2C: | 
|  | if (we_p->funccode == ICARSAMODEXPO) | 
|  | function = PCI_FUNC_KEY_ENCRYPT; | 
|  | else | 
|  | function = PCI_FUNC_KEY_DECRYPT; | 
|  | break; | 
|  | /** | 
|  | * PCICC does everything as a PKCS-1.2 format request | 
|  | */ | 
|  | case PCICC: | 
|  | /* PCICC cannot handle input that is is PKCS#1.1 padded */ | 
|  | if (is_PKCS11_padded(temp_buffer, mex_p->inputdatalength)) { | 
|  | return SEN_NOT_AVAIL; | 
|  | } | 
|  | if (we_p->funccode == ICARSAMODEXPO) { | 
|  | if (is_PKCS12_padded(temp_buffer, | 
|  | mex_p->inputdatalength)) | 
|  | function = PCI_FUNC_KEY_ENCRYPT; | 
|  | else | 
|  | function = PCI_FUNC_KEY_DECRYPT; | 
|  | } else | 
|  | /* all CRT forms are decrypts */ | 
|  | function = PCI_FUNC_KEY_DECRYPT; | 
|  | break; | 
|  | } | 
|  | PDEBUG("function: %04x\n", function); | 
|  | rv = build_caller(we_p, function); | 
|  | PDEBUG("rv from build_caller = %d\n", rv); | 
|  | return rv; | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | z90crypt_prepare(struct work_element *we_p, unsigned int funccode, | 
|  | const char __user *buffer) | 
|  | { | 
|  | int rv; | 
|  |  | 
|  | we_p->devindex = -1; | 
|  | if (funccode == ICARSAMODEXPO) | 
|  | we_p->buff_size = sizeof(struct ica_rsa_modexpo); | 
|  | else | 
|  | we_p->buff_size = sizeof(struct ica_rsa_modexpo_crt); | 
|  |  | 
|  | if (copy_from_user(we_p->buffer, buffer, we_p->buff_size)) | 
|  | return -EFAULT; | 
|  |  | 
|  | we_p->audit[0] |= FP_COPYFROM; | 
|  | SET_RDWRMASK(we_p->status[0], STAT_WRITTEN); | 
|  | we_p->funccode = funccode; | 
|  | we_p->devtype = -1; | 
|  | we_p->audit[0] |= FP_BUFFREQ; | 
|  | rv = get_crypto_request_buffer(we_p); | 
|  | switch (rv) { | 
|  | case 0: | 
|  | we_p->audit[0] |= FP_BUFFGOT; | 
|  | break; | 
|  | case SEN_USER_ERROR: | 
|  | rv = -EINVAL; | 
|  | break; | 
|  | case SEN_QUEUE_FULL: | 
|  | rv = 0; | 
|  | break; | 
|  | case SEN_RELEASED: | 
|  | rv = -EFAULT; | 
|  | break; | 
|  | case REC_NO_RESPONSE: | 
|  | rv = -ENODEV; | 
|  | break; | 
|  | case SEN_NOT_AVAIL: | 
|  | case EGETBUFF: | 
|  | rv = -EGETBUFF; | 
|  | break; | 
|  | default: | 
|  | PRINTK("rv = %d\n", rv); | 
|  | rv = -EGETBUFF; | 
|  | break; | 
|  | } | 
|  | if (CHK_RDWRMASK(we_p->status[0]) == STAT_WRITTEN) | 
|  | SET_RDWRMASK(we_p->status[0], STAT_DEFAULT); | 
|  | return rv; | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | purge_work_element(struct work_element *we_p) | 
|  | { | 
|  | struct list_head *lptr; | 
|  |  | 
|  | spin_lock_irq(&queuespinlock); | 
|  | list_for_each(lptr, &request_list) { | 
|  | if (lptr == &we_p->liste) { | 
|  | list_del_init(lptr); | 
|  | requestq_count--; | 
|  | break; | 
|  | } | 
|  | } | 
|  | list_for_each(lptr, &pending_list) { | 
|  | if (lptr == &we_p->liste) { | 
|  | list_del_init(lptr); | 
|  | pendingq_count--; | 
|  | break; | 
|  | } | 
|  | } | 
|  | spin_unlock_irq(&queuespinlock); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Build the request and send it. | 
|  | */ | 
|  | static inline int | 
|  | z90crypt_rsa(struct priv_data *private_data_p, pid_t pid, | 
|  | unsigned int cmd, unsigned long arg) | 
|  | { | 
|  | struct work_element *we_p; | 
|  | int rv; | 
|  |  | 
|  | if ((rv = allocate_work_element(&we_p, private_data_p, pid))) { | 
|  | PDEBUG("PID %d: allocate_work_element returned ENOMEM\n", pid); | 
|  | return rv; | 
|  | } | 
|  | if ((rv = z90crypt_prepare(we_p, cmd, (const char __user *)arg))) | 
|  | PDEBUG("PID %d: rv = %d from z90crypt_prepare\n", pid, rv); | 
|  | if (!rv) | 
|  | if ((rv = z90crypt_send(we_p, (const char *)arg))) | 
|  | PDEBUG("PID %d: rv %d from z90crypt_send.\n", pid, rv); | 
|  | if (!rv) { | 
|  | we_p->audit[0] |= FP_ASLEEP; | 
|  | wait_event(we_p->waitq, atomic_read(&we_p->alarmrung)); | 
|  | we_p->audit[0] |= FP_AWAKE; | 
|  | rv = we_p->retcode; | 
|  | } | 
|  | if (!rv) | 
|  | rv = z90crypt_process_results(we_p, (char __user *)arg); | 
|  |  | 
|  | if ((we_p->status[0] & STAT_FAILED)) { | 
|  | switch (rv) { | 
|  | /** | 
|  | * EINVAL *after* receive is almost always a padding error or | 
|  | * length error issued by a coprocessor (not an accelerator). | 
|  | * We convert this return value to -EGETBUFF which should | 
|  | * trigger a fallback to software. | 
|  | */ | 
|  | case -EINVAL: | 
|  | if (we_p->devtype != PCICA) | 
|  | rv = -EGETBUFF; | 
|  | break; | 
|  | case -ETIMEOUT: | 
|  | if (z90crypt.mask.st_count > 0) | 
|  | rv = -ERESTARTSYS; // retry with another | 
|  | else | 
|  | rv = -ENODEV; // no cards left | 
|  | /* fall through to clean up request queue */ | 
|  | case -ERESTARTSYS: | 
|  | case -ERELEASED: | 
|  | switch (CHK_RDWRMASK(we_p->status[0])) { | 
|  | case STAT_WRITTEN: | 
|  | purge_work_element(we_p); | 
|  | break; | 
|  | case STAT_READPEND: | 
|  | case STAT_NOWORK: | 
|  | default: | 
|  | break; | 
|  | } | 
|  | break; | 
|  | default: | 
|  | we_p->status[0] ^= STAT_FAILED; | 
|  | break; | 
|  | } | 
|  | } | 
|  | free_page((long)we_p); | 
|  | return rv; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * This function is a little long, but it's really just one large switch | 
|  | * statement. | 
|  | */ | 
|  | static long | 
|  | z90crypt_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) | 
|  | { | 
|  | struct priv_data *private_data_p = filp->private_data; | 
|  | unsigned char *status; | 
|  | unsigned char *qdepth; | 
|  | unsigned int *reqcnt; | 
|  | struct ica_z90_status *pstat; | 
|  | int ret, i, loopLim, tempstat; | 
|  | static int deprecated_msg_count1 = 0; | 
|  | static int deprecated_msg_count2 = 0; | 
|  |  | 
|  | PDEBUG("filp %p (PID %d), cmd 0x%08X\n", filp, PID(), cmd); | 
|  | PDEBUG("cmd 0x%08X: dir %s, size 0x%04X, type 0x%02X, nr 0x%02X\n", | 
|  | cmd, | 
|  | !_IOC_DIR(cmd) ? "NO" | 
|  | : ((_IOC_DIR(cmd) == (_IOC_READ|_IOC_WRITE)) ? "RW" | 
|  | : ((_IOC_DIR(cmd) == _IOC_READ) ? "RD" | 
|  | : "WR")), | 
|  | _IOC_SIZE(cmd), _IOC_TYPE(cmd), _IOC_NR(cmd)); | 
|  |  | 
|  | if (_IOC_TYPE(cmd) != Z90_IOCTL_MAGIC) { | 
|  | PRINTK("cmd 0x%08X contains bad magic\n", cmd); | 
|  | return -ENOTTY; | 
|  | } | 
|  |  | 
|  | ret = 0; | 
|  | switch (cmd) { | 
|  | case ICARSAMODEXPO: | 
|  | case ICARSACRT: | 
|  | if (quiesce_z90crypt) { | 
|  | ret = -EQUIESCE; | 
|  | break; | 
|  | } | 
|  | ret = -ENODEV; // Default if no devices | 
|  | loopLim = z90crypt.hdware_info->hdware_mask.st_count - | 
|  | (z90crypt.hdware_info->hdware_mask.disabled_count + | 
|  | z90crypt.hdware_info->hdware_mask.user_disabled_count); | 
|  | for (i = 0; i < loopLim; i++) { | 
|  | ret = z90crypt_rsa(private_data_p, PID(), cmd, arg); | 
|  | if (ret != -ERESTARTSYS) | 
|  | break; | 
|  | } | 
|  | if (ret == -ERESTARTSYS) | 
|  | ret = -ENODEV; | 
|  | break; | 
|  |  | 
|  | case Z90STAT_TOTALCOUNT: | 
|  | tempstat = get_status_totalcount(); | 
|  | if (copy_to_user((int __user *)arg, &tempstat,sizeof(int)) != 0) | 
|  | ret = -EFAULT; | 
|  | break; | 
|  |  | 
|  | case Z90STAT_PCICACOUNT: | 
|  | tempstat = get_status_PCICAcount(); | 
|  | if (copy_to_user((int __user *)arg, &tempstat, sizeof(int)) != 0) | 
|  | ret = -EFAULT; | 
|  | break; | 
|  |  | 
|  | case Z90STAT_PCICCCOUNT: | 
|  | tempstat = get_status_PCICCcount(); | 
|  | if (copy_to_user((int __user *)arg, &tempstat, sizeof(int)) != 0) | 
|  | ret = -EFAULT; | 
|  | break; | 
|  |  | 
|  | case Z90STAT_PCIXCCMCL2COUNT: | 
|  | tempstat = get_status_PCIXCCMCL2count(); | 
|  | if (copy_to_user((int __user *)arg, &tempstat, sizeof(int)) != 0) | 
|  | ret = -EFAULT; | 
|  | break; | 
|  |  | 
|  | case Z90STAT_PCIXCCMCL3COUNT: | 
|  | tempstat = get_status_PCIXCCMCL3count(); | 
|  | if (copy_to_user((int __user *)arg, &tempstat, sizeof(int)) != 0) | 
|  | ret = -EFAULT; | 
|  | break; | 
|  |  | 
|  | case Z90STAT_CEX2CCOUNT: | 
|  | tempstat = get_status_CEX2Ccount(); | 
|  | if (copy_to_user((int __user *)arg, &tempstat, sizeof(int)) != 0) | 
|  | ret = -EFAULT; | 
|  | break; | 
|  |  | 
|  | case Z90STAT_REQUESTQ_COUNT: | 
|  | tempstat = get_status_requestq_count(); | 
|  | if (copy_to_user((int __user *)arg, &tempstat, sizeof(int)) != 0) | 
|  | ret = -EFAULT; | 
|  | break; | 
|  |  | 
|  | case Z90STAT_PENDINGQ_COUNT: | 
|  | tempstat = get_status_pendingq_count(); | 
|  | if (copy_to_user((int __user *)arg, &tempstat, sizeof(int)) != 0) | 
|  | ret = -EFAULT; | 
|  | break; | 
|  |  | 
|  | case Z90STAT_TOTALOPEN_COUNT: | 
|  | tempstat = get_status_totalopen_count(); | 
|  | if (copy_to_user((int __user *)arg, &tempstat, sizeof(int)) != 0) | 
|  | ret = -EFAULT; | 
|  | break; | 
|  |  | 
|  | case Z90STAT_DOMAIN_INDEX: | 
|  | tempstat = get_status_domain_index(); | 
|  | if (copy_to_user((int __user *)arg, &tempstat, sizeof(int)) != 0) | 
|  | ret = -EFAULT; | 
|  | break; | 
|  |  | 
|  | case Z90STAT_STATUS_MASK: | 
|  | status = kmalloc(Z90CRYPT_NUM_APS, GFP_KERNEL); | 
|  | if (!status) { | 
|  | PRINTK("kmalloc for status failed!\n"); | 
|  | ret = -ENOMEM; | 
|  | break; | 
|  | } | 
|  | get_status_status_mask(status); | 
|  | if (copy_to_user((char __user *) arg, status, Z90CRYPT_NUM_APS) | 
|  | != 0) | 
|  | ret = -EFAULT; | 
|  | kfree(status); | 
|  | break; | 
|  |  | 
|  | case Z90STAT_QDEPTH_MASK: | 
|  | qdepth = kmalloc(Z90CRYPT_NUM_APS, GFP_KERNEL); | 
|  | if (!qdepth) { | 
|  | PRINTK("kmalloc for qdepth failed!\n"); | 
|  | ret = -ENOMEM; | 
|  | break; | 
|  | } | 
|  | get_status_qdepth_mask(qdepth); | 
|  | if (copy_to_user((char __user *) arg, qdepth, Z90CRYPT_NUM_APS) != 0) | 
|  | ret = -EFAULT; | 
|  | kfree(qdepth); | 
|  | break; | 
|  |  | 
|  | case Z90STAT_PERDEV_REQCNT: | 
|  | reqcnt = kmalloc(sizeof(int) * Z90CRYPT_NUM_APS, GFP_KERNEL); | 
|  | if (!reqcnt) { | 
|  | PRINTK("kmalloc for reqcnt failed!\n"); | 
|  | ret = -ENOMEM; | 
|  | break; | 
|  | } | 
|  | get_status_perdevice_reqcnt(reqcnt); | 
|  | if (copy_to_user((char __user *) arg, reqcnt, | 
|  | Z90CRYPT_NUM_APS * sizeof(int)) != 0) | 
|  | ret = -EFAULT; | 
|  | kfree(reqcnt); | 
|  | break; | 
|  |  | 
|  | /* THIS IS DEPRECATED.	USE THE NEW STATUS CALLS */ | 
|  | case ICAZ90STATUS: | 
|  | if (deprecated_msg_count1 < 20) { | 
|  | PRINTK("deprecated call to ioctl (ICAZ90STATUS)!\n"); | 
|  | deprecated_msg_count1++; | 
|  | if (deprecated_msg_count1 == 20) | 
|  | PRINTK("No longer issuing messages related to " | 
|  | "deprecated call to ICAZ90STATUS.\n"); | 
|  | } | 
|  |  | 
|  | pstat = kmalloc(sizeof(struct ica_z90_status), GFP_KERNEL); | 
|  | if (!pstat) { | 
|  | PRINTK("kmalloc for pstat failed!\n"); | 
|  | ret = -ENOMEM; | 
|  | break; | 
|  | } | 
|  |  | 
|  | pstat->totalcount	 = get_status_totalcount(); | 
|  | pstat->leedslitecount	 = get_status_PCICAcount(); | 
|  | pstat->leeds2count	 = get_status_PCICCcount(); | 
|  | pstat->requestqWaitCount = get_status_requestq_count(); | 
|  | pstat->pendingqWaitCount = get_status_pendingq_count(); | 
|  | pstat->totalOpenCount	 = get_status_totalopen_count(); | 
|  | pstat->cryptoDomain	 = get_status_domain_index(); | 
|  | get_status_status_mask(pstat->status); | 
|  | get_status_qdepth_mask(pstat->qdepth); | 
|  |  | 
|  | if (copy_to_user((struct ica_z90_status __user *) arg, pstat, | 
|  | sizeof(struct ica_z90_status)) != 0) | 
|  | ret = -EFAULT; | 
|  | kfree(pstat); | 
|  | break; | 
|  |  | 
|  | /* THIS IS DEPRECATED.	USE THE NEW STATUS CALLS */ | 
|  | case Z90STAT_PCIXCCCOUNT: | 
|  | if (deprecated_msg_count2 < 20) { | 
|  | PRINTK("deprecated ioctl (Z90STAT_PCIXCCCOUNT)!\n"); | 
|  | deprecated_msg_count2++; | 
|  | if (deprecated_msg_count2 == 20) | 
|  | PRINTK("No longer issuing messages about depre" | 
|  | "cated ioctl Z90STAT_PCIXCCCOUNT.\n"); | 
|  | } | 
|  |  | 
|  | tempstat = get_status_PCIXCCcount(); | 
|  | if (copy_to_user((int *)arg, &tempstat, sizeof(int)) != 0) | 
|  | ret = -EFAULT; | 
|  | break; | 
|  |  | 
|  | case Z90QUIESCE: | 
|  | if (current->euid != 0) { | 
|  | PRINTK("QUIESCE fails: euid %d\n", | 
|  | current->euid); | 
|  | ret = -EACCES; | 
|  | } else { | 
|  | PRINTK("QUIESCE device from PID %d\n", PID()); | 
|  | quiesce_z90crypt = 1; | 
|  | } | 
|  | break; | 
|  |  | 
|  | default: | 
|  | /* user passed an invalid IOCTL number */ | 
|  | PDEBUG("cmd 0x%08X contains invalid ioctl code\n", cmd); | 
|  | ret = -ENOTTY; | 
|  | break; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | sprintcl(unsigned char *outaddr, unsigned char *addr, unsigned int len) | 
|  | { | 
|  | int hl, i; | 
|  |  | 
|  | hl = 0; | 
|  | for (i = 0; i < len; i++) | 
|  | hl += sprintf(outaddr+hl, "%01x", (unsigned int) addr[i]); | 
|  | hl += sprintf(outaddr+hl, " "); | 
|  |  | 
|  | return hl; | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | sprintrw(unsigned char *outaddr, unsigned char *addr, unsigned int len) | 
|  | { | 
|  | int hl, inl, c, cx; | 
|  |  | 
|  | hl = sprintf(outaddr, "	   "); | 
|  | inl = 0; | 
|  | for (c = 0; c < (len / 16); c++) { | 
|  | hl += sprintcl(outaddr+hl, addr+inl, 16); | 
|  | inl += 16; | 
|  | } | 
|  |  | 
|  | cx = len%16; | 
|  | if (cx) { | 
|  | hl += sprintcl(outaddr+hl, addr+inl, cx); | 
|  | inl += cx; | 
|  | } | 
|  |  | 
|  | hl += sprintf(outaddr+hl, "\n"); | 
|  |  | 
|  | return hl; | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | sprinthx(unsigned char *title, unsigned char *outaddr, | 
|  | unsigned char *addr, unsigned int len) | 
|  | { | 
|  | int hl, inl, r, rx; | 
|  |  | 
|  | hl = sprintf(outaddr, "\n%s\n", title); | 
|  | inl = 0; | 
|  | for (r = 0; r < (len / 64); r++) { | 
|  | hl += sprintrw(outaddr+hl, addr+inl, 64); | 
|  | inl += 64; | 
|  | } | 
|  | rx = len % 64; | 
|  | if (rx) { | 
|  | hl += sprintrw(outaddr+hl, addr+inl, rx); | 
|  | inl += rx; | 
|  | } | 
|  |  | 
|  | hl += sprintf(outaddr+hl, "\n"); | 
|  |  | 
|  | return hl; | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | sprinthx4(unsigned char *title, unsigned char *outaddr, | 
|  | unsigned int *array, unsigned int len) | 
|  | { | 
|  | int hl, r; | 
|  |  | 
|  | hl = sprintf(outaddr, "\n%s\n", title); | 
|  |  | 
|  | for (r = 0; r < len; r++) { | 
|  | if ((r % 8) == 0) | 
|  | hl += sprintf(outaddr+hl, "    "); | 
|  | hl += sprintf(outaddr+hl, "%08X ", array[r]); | 
|  | if ((r % 8) == 7) | 
|  | hl += sprintf(outaddr+hl, "\n"); | 
|  | } | 
|  |  | 
|  | hl += sprintf(outaddr+hl, "\n"); | 
|  |  | 
|  | return hl; | 
|  | } | 
|  |  | 
|  | static int | 
|  | z90crypt_status(char *resp_buff, char **start, off_t offset, | 
|  | int count, int *eof, void *data) | 
|  | { | 
|  | unsigned char *workarea; | 
|  | int len; | 
|  |  | 
|  | /* resp_buff is a page. Use the right half for a work area */ | 
|  | workarea = resp_buff+2000; | 
|  | len = 0; | 
|  | len += sprintf(resp_buff+len, "\nz90crypt version: %d.%d.%d\n", | 
|  | z90crypt_VERSION, z90crypt_RELEASE, z90crypt_VARIANT); | 
|  | len += sprintf(resp_buff+len, "Cryptographic domain: %d\n", | 
|  | get_status_domain_index()); | 
|  | len += sprintf(resp_buff+len, "Total device count: %d\n", | 
|  | get_status_totalcount()); | 
|  | len += sprintf(resp_buff+len, "PCICA count: %d\n", | 
|  | get_status_PCICAcount()); | 
|  | len += sprintf(resp_buff+len, "PCICC count: %d\n", | 
|  | get_status_PCICCcount()); | 
|  | len += sprintf(resp_buff+len, "PCIXCC MCL2 count: %d\n", | 
|  | get_status_PCIXCCMCL2count()); | 
|  | len += sprintf(resp_buff+len, "PCIXCC MCL3 count: %d\n", | 
|  | get_status_PCIXCCMCL3count()); | 
|  | len += sprintf(resp_buff+len, "CEX2C count: %d\n", | 
|  | get_status_CEX2Ccount()); | 
|  | len += sprintf(resp_buff+len, "requestq count: %d\n", | 
|  | get_status_requestq_count()); | 
|  | len += sprintf(resp_buff+len, "pendingq count: %d\n", | 
|  | get_status_pendingq_count()); | 
|  | len += sprintf(resp_buff+len, "Total open handles: %d\n\n", | 
|  | get_status_totalopen_count()); | 
|  | len += sprinthx( | 
|  | "Online devices: 1: PCICA, 2: PCICC, 3: PCIXCC (MCL2), " | 
|  | "4: PCIXCC (MCL3), 5: CEX2C", | 
|  | resp_buff+len, | 
|  | get_status_status_mask(workarea), | 
|  | Z90CRYPT_NUM_APS); | 
|  | len += sprinthx("Waiting work element counts", | 
|  | resp_buff+len, | 
|  | get_status_qdepth_mask(workarea), | 
|  | Z90CRYPT_NUM_APS); | 
|  | len += sprinthx4( | 
|  | "Per-device successfully completed request counts", | 
|  | resp_buff+len, | 
|  | get_status_perdevice_reqcnt((unsigned int *)workarea), | 
|  | Z90CRYPT_NUM_APS); | 
|  | *eof = 1; | 
|  | memset(workarea, 0, Z90CRYPT_NUM_APS * sizeof(unsigned int)); | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | disable_card(int card_index) | 
|  | { | 
|  | struct device *devp; | 
|  |  | 
|  | devp = LONG2DEVPTR(card_index); | 
|  | if (!devp || devp->user_disabled) | 
|  | return; | 
|  | devp->user_disabled = 1; | 
|  | z90crypt.hdware_info->hdware_mask.user_disabled_count++; | 
|  | if (devp->dev_type == -1) | 
|  | return; | 
|  | z90crypt.hdware_info->type_mask[devp->dev_type].user_disabled_count++; | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | enable_card(int card_index) | 
|  | { | 
|  | struct device *devp; | 
|  |  | 
|  | devp = LONG2DEVPTR(card_index); | 
|  | if (!devp || !devp->user_disabled) | 
|  | return; | 
|  | devp->user_disabled = 0; | 
|  | z90crypt.hdware_info->hdware_mask.user_disabled_count--; | 
|  | if (devp->dev_type == -1) | 
|  | return; | 
|  | z90crypt.hdware_info->type_mask[devp->dev_type].user_disabled_count--; | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | scan_char(unsigned char *bf, unsigned int len, | 
|  | unsigned int *offs, unsigned int *p_eof, unsigned char c) | 
|  | { | 
|  | unsigned int i, found; | 
|  |  | 
|  | found = 0; | 
|  | for (i = 0; i < len; i++) { | 
|  | if (bf[i] == c) { | 
|  | found = 1; | 
|  | break; | 
|  | } | 
|  | if (bf[i] == '\0') { | 
|  | *p_eof = 1; | 
|  | break; | 
|  | } | 
|  | if (bf[i] == '\n') { | 
|  | break; | 
|  | } | 
|  | } | 
|  | *offs = i+1; | 
|  | return found; | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | scan_string(unsigned char *bf, unsigned int len, | 
|  | unsigned int *offs, unsigned int *p_eof, unsigned char *s) | 
|  | { | 
|  | unsigned int temp_len, temp_offs, found, eof; | 
|  |  | 
|  | temp_len = temp_offs = found = eof = 0; | 
|  | while (!eof && !found) { | 
|  | found = scan_char(bf+temp_len, len-temp_len, | 
|  | &temp_offs, &eof, *s); | 
|  |  | 
|  | temp_len += temp_offs; | 
|  | if (eof) { | 
|  | found = 0; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (found) { | 
|  | if (len >= temp_offs+strlen(s)) { | 
|  | found = !strncmp(bf+temp_len-1, s, strlen(s)); | 
|  | if (found) { | 
|  | *offs = temp_len+strlen(s)-1; | 
|  | break; | 
|  | } | 
|  | } else { | 
|  | found = 0; | 
|  | *p_eof = 1; | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  | return found; | 
|  | } | 
|  |  | 
|  | static int | 
|  | z90crypt_status_write(struct file *file, const char __user *buffer, | 
|  | unsigned long count, void *data) | 
|  | { | 
|  | int i, j, len, offs, found, eof; | 
|  | unsigned char *lbuf; | 
|  | unsigned int local_count; | 
|  |  | 
|  | #define LBUFSIZE 600 | 
|  | lbuf = kmalloc(LBUFSIZE, GFP_KERNEL); | 
|  | if (!lbuf) { | 
|  | PRINTK("kmalloc failed!\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (count <= 0) | 
|  | return 0; | 
|  |  | 
|  | local_count = UMIN((unsigned int)count, LBUFSIZE-1); | 
|  |  | 
|  | if (copy_from_user(lbuf, buffer, local_count) != 0) { | 
|  | kfree(lbuf); | 
|  | return -EFAULT; | 
|  | } | 
|  |  | 
|  | lbuf[local_count-1] = '\0'; | 
|  |  | 
|  | len = 0; | 
|  | eof = 0; | 
|  | found = 0; | 
|  | while (!eof) { | 
|  | found = scan_string(lbuf+len, local_count-len, &offs, &eof, | 
|  | "Online devices"); | 
|  | len += offs; | 
|  | if (found == 1) | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (eof) { | 
|  | kfree(lbuf); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | if (found) | 
|  | found = scan_char(lbuf+len, local_count-len, &offs, &eof, '\n'); | 
|  |  | 
|  | if (!found || eof) { | 
|  | kfree(lbuf); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | len += offs; | 
|  | j = 0; | 
|  | for (i = 0; i < 80; i++) { | 
|  | switch (*(lbuf+len+i)) { | 
|  | case '\t': | 
|  | case ' ': | 
|  | break; | 
|  | case '\n': | 
|  | default: | 
|  | eof = 1; | 
|  | break; | 
|  | case '0': | 
|  | case '1': | 
|  | case '2': | 
|  | case '3': | 
|  | case '4': | 
|  | case '5': | 
|  | j++; | 
|  | break; | 
|  | case 'd': | 
|  | case 'D': | 
|  | disable_card(j); | 
|  | j++; | 
|  | break; | 
|  | case 'e': | 
|  | case 'E': | 
|  | enable_card(j); | 
|  | j++; | 
|  | break; | 
|  | } | 
|  | if (eof) | 
|  | break; | 
|  | } | 
|  |  | 
|  | kfree(lbuf); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Functions that run under a timer, with no process id | 
|  | * | 
|  | * The task functions: | 
|  | *     z90crypt_reader_task | 
|  | *	 helper_send_work | 
|  | *	 helper_handle_work_element | 
|  | *	 helper_receive_rc | 
|  | *     z90crypt_config_task | 
|  | *     z90crypt_cleanup_task | 
|  | * | 
|  | * Helper functions: | 
|  | *     z90crypt_schedule_reader_timer | 
|  | *     z90crypt_schedule_reader_task | 
|  | *     z90crypt_schedule_config_task | 
|  | *     z90crypt_schedule_cleanup_task | 
|  | */ | 
|  | static inline int | 
|  | receive_from_crypto_device(int index, unsigned char *psmid, int *buff_len_p, | 
|  | unsigned char *buff, unsigned char __user **dest_p_p) | 
|  | { | 
|  | int dv, rv; | 
|  | struct device *dev_ptr; | 
|  | struct caller *caller_p; | 
|  | struct ica_rsa_modexpo *icaMsg_p; | 
|  | struct list_head *ptr, *tptr; | 
|  |  | 
|  | memcpy(psmid, NULL_psmid, sizeof(NULL_psmid)); | 
|  |  | 
|  | if (z90crypt.terminating) | 
|  | return REC_FATAL_ERROR; | 
|  |  | 
|  | caller_p = 0; | 
|  | dev_ptr = z90crypt.device_p[index]; | 
|  | rv = 0; | 
|  | do { | 
|  | if (!dev_ptr || dev_ptr->disabled) { | 
|  | rv = REC_NO_WORK; // a disabled device can't return work | 
|  | break; | 
|  | } | 
|  | if (dev_ptr->dev_self_x != index) { | 
|  | PRINTKC("Corrupt dev ptr\n"); | 
|  | z90crypt.terminating = 1; | 
|  | rv = REC_FATAL_ERROR; | 
|  | break; | 
|  | } | 
|  | if (!dev_ptr->dev_resp_l || !dev_ptr->dev_resp_p) { | 
|  | dv = DEV_REC_EXCEPTION; | 
|  | PRINTK("dev_resp_l = %d, dev_resp_p = %p\n", | 
|  | dev_ptr->dev_resp_l, dev_ptr->dev_resp_p); | 
|  | } else { | 
|  | PDEBUG("Dequeue called for device %d\n", index); | 
|  | dv = receive_from_AP(index, z90crypt.cdx, | 
|  | dev_ptr->dev_resp_l, | 
|  | dev_ptr->dev_resp_p, psmid); | 
|  | } | 
|  | switch (dv) { | 
|  | case DEV_REC_EXCEPTION: | 
|  | rv = REC_FATAL_ERROR; | 
|  | z90crypt.terminating = 1; | 
|  | PRINTKC("Exception in receive from device %d\n", | 
|  | index); | 
|  | break; | 
|  | case DEV_ONLINE: | 
|  | rv = 0; | 
|  | break; | 
|  | case DEV_EMPTY: | 
|  | rv = REC_EMPTY; | 
|  | break; | 
|  | case DEV_NO_WORK: | 
|  | rv = REC_NO_WORK; | 
|  | break; | 
|  | case DEV_BAD_MESSAGE: | 
|  | case DEV_GONE: | 
|  | case REC_HARDWAR_ERR: | 
|  | default: | 
|  | rv = REC_NO_RESPONSE; | 
|  | break; | 
|  | } | 
|  | if (rv) | 
|  | break; | 
|  | if (dev_ptr->dev_caller_count <= 0) { | 
|  | rv = REC_USER_GONE; | 
|  | break; | 
|  | } | 
|  |  | 
|  | list_for_each_safe(ptr, tptr, &dev_ptr->dev_caller_list) { | 
|  | caller_p = list_entry(ptr, struct caller, caller_liste); | 
|  | if (!memcmp(caller_p->caller_id, psmid, | 
|  | sizeof(caller_p->caller_id))) { | 
|  | if (!list_empty(&caller_p->caller_liste)) { | 
|  | list_del_init(ptr); | 
|  | dev_ptr->dev_caller_count--; | 
|  | break; | 
|  | } | 
|  | } | 
|  | caller_p = 0; | 
|  | } | 
|  | if (!caller_p) { | 
|  | PRINTKW("Unable to locate PSMID %02X%02X%02X%02X%02X" | 
|  | "%02X%02X%02X in device list\n", | 
|  | psmid[0], psmid[1], psmid[2], psmid[3], | 
|  | psmid[4], psmid[5], psmid[6], psmid[7]); | 
|  | rv = REC_USER_GONE; | 
|  | break; | 
|  | } | 
|  |  | 
|  | PDEBUG("caller_p after successful receive: %p\n", caller_p); | 
|  | rv = convert_response(dev_ptr->dev_resp_p, | 
|  | caller_p->caller_buf_p, buff_len_p, buff); | 
|  | switch (rv) { | 
|  | case REC_USE_PCICA: | 
|  | break; | 
|  | case REC_OPERAND_INV: | 
|  | case REC_OPERAND_SIZE: | 
|  | case REC_EVEN_MOD: | 
|  | case REC_INVALID_PAD: | 
|  | PDEBUG("device %d: 'user error' %d\n", index, rv); | 
|  | break; | 
|  | case WRONG_DEVICE_TYPE: | 
|  | case REC_HARDWAR_ERR: | 
|  | case REC_BAD_MESSAGE: | 
|  | PRINTKW("device %d: hardware error %d\n", index, rv); | 
|  | rv = REC_NO_RESPONSE; | 
|  | break; | 
|  | default: | 
|  | PDEBUG("device %d: rv = %d\n", index, rv); | 
|  | break; | 
|  | } | 
|  | } while (0); | 
|  |  | 
|  | switch (rv) { | 
|  | case 0: | 
|  | PDEBUG("Successful receive from device %d\n", index); | 
|  | icaMsg_p = (struct ica_rsa_modexpo *)caller_p->caller_buf_p; | 
|  | *dest_p_p = icaMsg_p->outputdata; | 
|  | if (*buff_len_p == 0) | 
|  | PRINTK("Zero *buff_len_p\n"); | 
|  | break; | 
|  | case REC_NO_RESPONSE: | 
|  | PRINTKW("Removing device %d from availability\n", index); | 
|  | remove_device(dev_ptr); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (caller_p) | 
|  | unbuild_caller(dev_ptr, caller_p); | 
|  |  | 
|  | return rv; | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | helper_send_work(int index) | 
|  | { | 
|  | struct work_element *rq_p; | 
|  | int rv; | 
|  |  | 
|  | if (list_empty(&request_list)) | 
|  | return; | 
|  | requestq_count--; | 
|  | rq_p = list_entry(request_list.next, struct work_element, liste); | 
|  | list_del_init(&rq_p->liste); | 
|  | rq_p->audit[1] |= FP_REMREQUEST; | 
|  | if (rq_p->devtype == SHRT2DEVPTR(index)->dev_type) { | 
|  | rq_p->devindex = SHRT2LONG(index); | 
|  | rv = send_to_crypto_device(rq_p); | 
|  | if (rv == 0) { | 
|  | rq_p->requestsent = jiffies; | 
|  | rq_p->audit[0] |= FP_SENT; | 
|  | list_add_tail(&rq_p->liste, &pending_list); | 
|  | ++pendingq_count; | 
|  | rq_p->audit[0] |= FP_PENDING; | 
|  | } else { | 
|  | switch (rv) { | 
|  | case REC_OPERAND_INV: | 
|  | case REC_OPERAND_SIZE: | 
|  | case REC_EVEN_MOD: | 
|  | case REC_INVALID_PAD: | 
|  | rq_p->retcode = -EINVAL; | 
|  | break; | 
|  | case SEN_NOT_AVAIL: | 
|  | case SEN_RETRY: | 
|  | case REC_NO_RESPONSE: | 
|  | default: | 
|  | if (z90crypt.mask.st_count > 1) | 
|  | rq_p->retcode = | 
|  | -ERESTARTSYS; | 
|  | else | 
|  | rq_p->retcode = -ENODEV; | 
|  | break; | 
|  | } | 
|  | rq_p->status[0] |= STAT_FAILED; | 
|  | rq_p->audit[1] |= FP_AWAKENING; | 
|  | atomic_set(&rq_p->alarmrung, 1); | 
|  | wake_up(&rq_p->waitq); | 
|  | } | 
|  | } else { | 
|  | if (z90crypt.mask.st_count > 1) | 
|  | rq_p->retcode = -ERESTARTSYS; | 
|  | else | 
|  | rq_p->retcode = -ENODEV; | 
|  | rq_p->status[0] |= STAT_FAILED; | 
|  | rq_p->audit[1] |= FP_AWAKENING; | 
|  | atomic_set(&rq_p->alarmrung, 1); | 
|  | wake_up(&rq_p->waitq); | 
|  | } | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | helper_handle_work_element(int index, unsigned char psmid[8], int rc, | 
|  | int buff_len, unsigned char *buff, | 
|  | unsigned char __user *resp_addr) | 
|  | { | 
|  | struct work_element *pq_p; | 
|  | struct list_head *lptr, *tptr; | 
|  |  | 
|  | pq_p = 0; | 
|  | list_for_each_safe(lptr, tptr, &pending_list) { | 
|  | pq_p = list_entry(lptr, struct work_element, liste); | 
|  | if (!memcmp(pq_p->caller_id, psmid, sizeof(pq_p->caller_id))) { | 
|  | list_del_init(lptr); | 
|  | pendingq_count--; | 
|  | pq_p->audit[1] |= FP_NOTPENDING; | 
|  | break; | 
|  | } | 
|  | pq_p = 0; | 
|  | } | 
|  |  | 
|  | if (!pq_p) { | 
|  | PRINTK("device %d has work but no caller exists on pending Q\n", | 
|  | SHRT2LONG(index)); | 
|  | return; | 
|  | } | 
|  |  | 
|  | switch (rc) { | 
|  | case 0: | 
|  | pq_p->resp_buff_size = buff_len; | 
|  | pq_p->audit[1] |= FP_RESPSIZESET; | 
|  | if (buff_len) { | 
|  | pq_p->resp_addr = resp_addr; | 
|  | pq_p->audit[1] |= FP_RESPADDRCOPIED; | 
|  | memcpy(pq_p->resp_buff, buff, buff_len); | 
|  | pq_p->audit[1] |= FP_RESPBUFFCOPIED; | 
|  | } | 
|  | break; | 
|  | case REC_OPERAND_INV: | 
|  | case REC_OPERAND_SIZE: | 
|  | case REC_EVEN_MOD: | 
|  | case REC_INVALID_PAD: | 
|  | PDEBUG("-EINVAL after application error %d\n", rc); | 
|  | pq_p->retcode = -EINVAL; | 
|  | pq_p->status[0] |= STAT_FAILED; | 
|  | break; | 
|  | case REC_USE_PCICA: | 
|  | pq_p->retcode = -ERESTARTSYS; | 
|  | pq_p->status[0] |= STAT_FAILED; | 
|  | break; | 
|  | case REC_NO_RESPONSE: | 
|  | default: | 
|  | if (z90crypt.mask.st_count > 1) | 
|  | pq_p->retcode = -ERESTARTSYS; | 
|  | else | 
|  | pq_p->retcode = -ENODEV; | 
|  | pq_p->status[0] |= STAT_FAILED; | 
|  | break; | 
|  | } | 
|  | if ((pq_p->status[0] != STAT_FAILED) || (pq_p->retcode != -ERELEASED)) { | 
|  | pq_p->audit[1] |= FP_AWAKENING; | 
|  | atomic_set(&pq_p->alarmrung, 1); | 
|  | wake_up(&pq_p->waitq); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * return TRUE if the work element should be removed from the queue | 
|  | */ | 
|  | static inline int | 
|  | helper_receive_rc(int index, int *rc_p) | 
|  | { | 
|  | switch (*rc_p) { | 
|  | case 0: | 
|  | case REC_OPERAND_INV: | 
|  | case REC_OPERAND_SIZE: | 
|  | case REC_EVEN_MOD: | 
|  | case REC_INVALID_PAD: | 
|  | case REC_USE_PCICA: | 
|  | break; | 
|  |  | 
|  | case REC_BUSY: | 
|  | case REC_NO_WORK: | 
|  | case REC_EMPTY: | 
|  | case REC_RETRY_DEV: | 
|  | case REC_FATAL_ERROR: | 
|  | return 0; | 
|  |  | 
|  | case REC_NO_RESPONSE: | 
|  | break; | 
|  |  | 
|  | default: | 
|  | PRINTK("rc %d, device %d converted to REC_NO_RESPONSE\n", | 
|  | *rc_p, SHRT2LONG(index)); | 
|  | *rc_p = REC_NO_RESPONSE; | 
|  | break; | 
|  | } | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | z90crypt_schedule_reader_timer(void) | 
|  | { | 
|  | if (timer_pending(&reader_timer)) | 
|  | return; | 
|  | if (mod_timer(&reader_timer, jiffies+(READERTIME*HZ/1000)) != 0) | 
|  | PRINTK("Timer pending while modifying reader timer\n"); | 
|  | } | 
|  |  | 
|  | static void | 
|  | z90crypt_reader_task(unsigned long ptr) | 
|  | { | 
|  | int workavail, index, rc, buff_len; | 
|  | unsigned char	psmid[8]; | 
|  | unsigned char __user *resp_addr; | 
|  | static unsigned char buff[1024]; | 
|  |  | 
|  | /** | 
|  | * we use workavail = 2 to ensure 2 passes with nothing dequeued before | 
|  | * exiting the loop. If (pendingq_count+requestq_count) == 0 after the | 
|  | * loop, there is no work remaining on the queues. | 
|  | */ | 
|  | resp_addr = 0; | 
|  | workavail = 2; | 
|  | buff_len = 0; | 
|  | while (workavail) { | 
|  | workavail--; | 
|  | rc = 0; | 
|  | spin_lock_irq(&queuespinlock); | 
|  | memset(buff, 0x00, sizeof(buff)); | 
|  |  | 
|  | /* Dequeue once from each device in round robin. */ | 
|  | for (index = 0; index < z90crypt.mask.st_count; index++) { | 
|  | PDEBUG("About to receive.\n"); | 
|  | rc = receive_from_crypto_device(SHRT2LONG(index), | 
|  | psmid, | 
|  | &buff_len, | 
|  | buff, | 
|  | &resp_addr); | 
|  | PDEBUG("Dequeued: rc = %d.\n", rc); | 
|  |  | 
|  | if (helper_receive_rc(index, &rc)) { | 
|  | if (rc != REC_NO_RESPONSE) { | 
|  | helper_send_work(index); | 
|  | workavail = 2; | 
|  | } | 
|  |  | 
|  | helper_handle_work_element(index, psmid, rc, | 
|  | buff_len, buff, | 
|  | resp_addr); | 
|  | } | 
|  |  | 
|  | if (rc == REC_FATAL_ERROR) | 
|  | PRINTKW("REC_FATAL_ERROR from device %d!\n", | 
|  | SHRT2LONG(index)); | 
|  | } | 
|  | spin_unlock_irq(&queuespinlock); | 
|  | } | 
|  |  | 
|  | if (pendingq_count + requestq_count) | 
|  | z90crypt_schedule_reader_timer(); | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | z90crypt_schedule_config_task(unsigned int expiration) | 
|  | { | 
|  | if (timer_pending(&config_timer)) | 
|  | return; | 
|  | if (mod_timer(&config_timer, jiffies+(expiration*HZ)) != 0) | 
|  | PRINTK("Timer pending while modifying config timer\n"); | 
|  | } | 
|  |  | 
|  | static void | 
|  | z90crypt_config_task(unsigned long ptr) | 
|  | { | 
|  | int rc; | 
|  |  | 
|  | PDEBUG("jiffies %ld\n", jiffies); | 
|  |  | 
|  | if ((rc = refresh_z90crypt(&z90crypt.cdx))) | 
|  | PRINTK("Error %d detected in refresh_z90crypt.\n", rc); | 
|  | /* If return was fatal, don't bother reconfiguring */ | 
|  | if ((rc != TSQ_FATAL_ERROR) && (rc != RSQ_FATAL_ERROR)) | 
|  | z90crypt_schedule_config_task(CONFIGTIME); | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | z90crypt_schedule_cleanup_task(void) | 
|  | { | 
|  | if (timer_pending(&cleanup_timer)) | 
|  | return; | 
|  | if (mod_timer(&cleanup_timer, jiffies+(CLEANUPTIME*HZ)) != 0) | 
|  | PRINTK("Timer pending while modifying cleanup timer\n"); | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | helper_drain_queues(void) | 
|  | { | 
|  | struct work_element *pq_p; | 
|  | struct list_head *lptr, *tptr; | 
|  |  | 
|  | list_for_each_safe(lptr, tptr, &pending_list) { | 
|  | pq_p = list_entry(lptr, struct work_element, liste); | 
|  | pq_p->retcode = -ENODEV; | 
|  | pq_p->status[0] |= STAT_FAILED; | 
|  | unbuild_caller(LONG2DEVPTR(pq_p->devindex), | 
|  | (struct caller *)pq_p->requestptr); | 
|  | list_del_init(lptr); | 
|  | pendingq_count--; | 
|  | pq_p->audit[1] |= FP_NOTPENDING; | 
|  | pq_p->audit[1] |= FP_AWAKENING; | 
|  | atomic_set(&pq_p->alarmrung, 1); | 
|  | wake_up(&pq_p->waitq); | 
|  | } | 
|  |  | 
|  | list_for_each_safe(lptr, tptr, &request_list) { | 
|  | pq_p = list_entry(lptr, struct work_element, liste); | 
|  | pq_p->retcode = -ENODEV; | 
|  | pq_p->status[0] |= STAT_FAILED; | 
|  | list_del_init(lptr); | 
|  | requestq_count--; | 
|  | pq_p->audit[1] |= FP_REMREQUEST; | 
|  | pq_p->audit[1] |= FP_AWAKENING; | 
|  | atomic_set(&pq_p->alarmrung, 1); | 
|  | wake_up(&pq_p->waitq); | 
|  | } | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | helper_timeout_requests(void) | 
|  | { | 
|  | struct work_element *pq_p; | 
|  | struct list_head *lptr, *tptr; | 
|  | long timelimit; | 
|  |  | 
|  | timelimit = jiffies - (CLEANUPTIME * HZ); | 
|  | /* The list is in strict chronological order */ | 
|  | list_for_each_safe(lptr, tptr, &pending_list) { | 
|  | pq_p = list_entry(lptr, struct work_element, liste); | 
|  | if (pq_p->requestsent >= timelimit) | 
|  | break; | 
|  | PRINTKW("Purging(PQ) PSMID %02X%02X%02X%02X%02X%02X%02X%02X\n", | 
|  | ((struct caller *)pq_p->requestptr)->caller_id[0], | 
|  | ((struct caller *)pq_p->requestptr)->caller_id[1], | 
|  | ((struct caller *)pq_p->requestptr)->caller_id[2], | 
|  | ((struct caller *)pq_p->requestptr)->caller_id[3], | 
|  | ((struct caller *)pq_p->requestptr)->caller_id[4], | 
|  | ((struct caller *)pq_p->requestptr)->caller_id[5], | 
|  | ((struct caller *)pq_p->requestptr)->caller_id[6], | 
|  | ((struct caller *)pq_p->requestptr)->caller_id[7]); | 
|  | pq_p->retcode = -ETIMEOUT; | 
|  | pq_p->status[0] |= STAT_FAILED; | 
|  | /* get this off any caller queue it may be on */ | 
|  | unbuild_caller(LONG2DEVPTR(pq_p->devindex), | 
|  | (struct caller *) pq_p->requestptr); | 
|  | list_del_init(lptr); | 
|  | pendingq_count--; | 
|  | pq_p->audit[1] |= FP_TIMEDOUT; | 
|  | pq_p->audit[1] |= FP_NOTPENDING; | 
|  | pq_p->audit[1] |= FP_AWAKENING; | 
|  | atomic_set(&pq_p->alarmrung, 1); | 
|  | wake_up(&pq_p->waitq); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * If pending count is zero, items left on the request queue may | 
|  | * never be processed. | 
|  | */ | 
|  | if (pendingq_count <= 0) { | 
|  | list_for_each_safe(lptr, tptr, &request_list) { | 
|  | pq_p = list_entry(lptr, struct work_element, liste); | 
|  | if (pq_p->requestsent >= timelimit) | 
|  | break; | 
|  | PRINTKW("Purging(RQ) PSMID %02X%02X%02X%02X%02X%02X%02X%02X\n", | 
|  | ((struct caller *)pq_p->requestptr)->caller_id[0], | 
|  | ((struct caller *)pq_p->requestptr)->caller_id[1], | 
|  | ((struct caller *)pq_p->requestptr)->caller_id[2], | 
|  | ((struct caller *)pq_p->requestptr)->caller_id[3], | 
|  | ((struct caller *)pq_p->requestptr)->caller_id[4], | 
|  | ((struct caller *)pq_p->requestptr)->caller_id[5], | 
|  | ((struct caller *)pq_p->requestptr)->caller_id[6], | 
|  | ((struct caller *)pq_p->requestptr)->caller_id[7]); | 
|  | pq_p->retcode = -ETIMEOUT; | 
|  | pq_p->status[0] |= STAT_FAILED; | 
|  | list_del_init(lptr); | 
|  | requestq_count--; | 
|  | pq_p->audit[1] |= FP_TIMEDOUT; | 
|  | pq_p->audit[1] |= FP_REMREQUEST; | 
|  | pq_p->audit[1] |= FP_AWAKENING; | 
|  | atomic_set(&pq_p->alarmrung, 1); | 
|  | wake_up(&pq_p->waitq); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void | 
|  | z90crypt_cleanup_task(unsigned long ptr) | 
|  | { | 
|  | PDEBUG("jiffies %ld\n", jiffies); | 
|  | spin_lock_irq(&queuespinlock); | 
|  | if (z90crypt.mask.st_count <= 0) // no devices! | 
|  | helper_drain_queues(); | 
|  | else | 
|  | helper_timeout_requests(); | 
|  | spin_unlock_irq(&queuespinlock); | 
|  | z90crypt_schedule_cleanup_task(); | 
|  | } | 
|  |  | 
|  | static void | 
|  | z90crypt_schedule_reader_task(unsigned long ptr) | 
|  | { | 
|  | tasklet_schedule(&reader_tasklet); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Lowlevel Functions: | 
|  | * | 
|  | *   create_z90crypt:  creates and initializes basic data structures | 
|  | *   refresh_z90crypt:	re-initializes basic data structures | 
|  | *   find_crypto_devices: returns a count and mask of hardware status | 
|  | *   create_crypto_device:  builds the descriptor for a device | 
|  | *   destroy_crypto_device:  unallocates the descriptor for a device | 
|  | *   destroy_z90crypt:	drains all work, unallocates structs | 
|  | */ | 
|  |  | 
|  | /** | 
|  | * build the z90crypt root structure using the given domain index | 
|  | */ | 
|  | static int | 
|  | create_z90crypt(int *cdx_p) | 
|  | { | 
|  | struct hdware_block *hdware_blk_p; | 
|  |  | 
|  | memset(&z90crypt, 0x00, sizeof(struct z90crypt)); | 
|  | z90crypt.domain_established = 0; | 
|  | z90crypt.len = sizeof(struct z90crypt); | 
|  | z90crypt.max_count = Z90CRYPT_NUM_DEVS; | 
|  | z90crypt.cdx = *cdx_p; | 
|  |  | 
|  | hdware_blk_p = (struct hdware_block *) | 
|  | kmalloc(sizeof(struct hdware_block), GFP_ATOMIC); | 
|  | if (!hdware_blk_p) { | 
|  | PDEBUG("kmalloc for hardware block failed\n"); | 
|  | return ENOMEM; | 
|  | } | 
|  | memset(hdware_blk_p, 0x00, sizeof(struct hdware_block)); | 
|  | z90crypt.hdware_info = hdware_blk_p; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | helper_scan_devices(int cdx_array[16], int *cdx_p, int *correct_cdx_found) | 
|  | { | 
|  | enum hdstat hd_stat; | 
|  | int q_depth, dev_type; | 
|  | int indx, chkdom, numdomains; | 
|  |  | 
|  | q_depth = dev_type = numdomains = 0; | 
|  | for (chkdom = 0; chkdom <= 15; cdx_array[chkdom++] = -1); | 
|  | for (indx = 0; indx < z90crypt.max_count; indx++) { | 
|  | hd_stat = HD_NOT_THERE; | 
|  | numdomains = 0; | 
|  | for (chkdom = 0; chkdom <= 15; chkdom++) { | 
|  | hd_stat = query_online(indx, chkdom, MAX_RESET, | 
|  | &q_depth, &dev_type); | 
|  | if (hd_stat == HD_TSQ_EXCEPTION) { | 
|  | z90crypt.terminating = 1; | 
|  | PRINTKC("exception taken!\n"); | 
|  | break; | 
|  | } | 
|  | if (hd_stat == HD_ONLINE) { | 
|  | cdx_array[numdomains++] = chkdom; | 
|  | if (*cdx_p == chkdom) { | 
|  | *correct_cdx_found  = 1; | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  | if ((*correct_cdx_found == 1) || (numdomains != 0)) | 
|  | break; | 
|  | if (z90crypt.terminating) | 
|  | break; | 
|  | } | 
|  | return numdomains; | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | probe_crypto_domain(int *cdx_p) | 
|  | { | 
|  | int cdx_array[16]; | 
|  | char cdx_array_text[53], temp[5]; | 
|  | int correct_cdx_found, numdomains; | 
|  |  | 
|  | correct_cdx_found = 0; | 
|  | numdomains = helper_scan_devices(cdx_array, cdx_p, &correct_cdx_found); | 
|  |  | 
|  | if (z90crypt.terminating) | 
|  | return TSQ_FATAL_ERROR; | 
|  |  | 
|  | if (correct_cdx_found) | 
|  | return 0; | 
|  |  | 
|  | if (numdomains == 0) { | 
|  | PRINTKW("Unable to find crypto domain: No devices found\n"); | 
|  | return Z90C_NO_DEVICES; | 
|  | } | 
|  |  | 
|  | if (numdomains == 1) { | 
|  | if (*cdx_p == -1) { | 
|  | *cdx_p = cdx_array[0]; | 
|  | return 0; | 
|  | } | 
|  | PRINTKW("incorrect domain: specified = %d, found = %d\n", | 
|  | *cdx_p, cdx_array[0]); | 
|  | return Z90C_INCORRECT_DOMAIN; | 
|  | } | 
|  |  | 
|  | numdomains--; | 
|  | sprintf(cdx_array_text, "%d", cdx_array[numdomains]); | 
|  | while (numdomains) { | 
|  | numdomains--; | 
|  | sprintf(temp, ", %d", cdx_array[numdomains]); | 
|  | strcat(cdx_array_text, temp); | 
|  | } | 
|  |  | 
|  | PRINTKW("ambiguous domain detected: specified = %d, found array = %s\n", | 
|  | *cdx_p, cdx_array_text); | 
|  | return Z90C_AMBIGUOUS_DOMAIN; | 
|  | } | 
|  |  | 
|  | static int | 
|  | refresh_z90crypt(int *cdx_p) | 
|  | { | 
|  | int i, j, indx, rv; | 
|  | static struct status local_mask; | 
|  | struct device *devPtr; | 
|  | unsigned char oldStat, newStat; | 
|  | int return_unchanged; | 
|  |  | 
|  | if (z90crypt.len != sizeof(z90crypt)) | 
|  | return ENOTINIT; | 
|  | if (z90crypt.terminating) | 
|  | return TSQ_FATAL_ERROR; | 
|  | rv = 0; | 
|  | if (!z90crypt.hdware_info->hdware_mask.st_count && | 
|  | !z90crypt.domain_established) { | 
|  | rv = probe_crypto_domain(cdx_p); | 
|  | if (z90crypt.terminating) | 
|  | return TSQ_FATAL_ERROR; | 
|  | if (rv == Z90C_NO_DEVICES) | 
|  | return 0; // try later | 
|  | if (rv) | 
|  | return rv; | 
|  | z90crypt.cdx = *cdx_p; | 
|  | z90crypt.domain_established = 1; | 
|  | } | 
|  | rv = find_crypto_devices(&local_mask); | 
|  | if (rv) { | 
|  | PRINTK("find crypto devices returned %d\n", rv); | 
|  | return rv; | 
|  | } | 
|  | if (!memcmp(&local_mask, &z90crypt.hdware_info->hdware_mask, | 
|  | sizeof(struct status))) { | 
|  | return_unchanged = 1; | 
|  | for (i = 0; i < Z90CRYPT_NUM_TYPES; i++) { | 
|  | /** | 
|  | * Check for disabled cards.  If any device is marked | 
|  | * disabled, destroy it. | 
|  | */ | 
|  | for (j = 0; | 
|  | j < z90crypt.hdware_info->type_mask[i].st_count; | 
|  | j++) { | 
|  | indx = z90crypt.hdware_info->type_x_addr[i]. | 
|  | device_index[j]; | 
|  | devPtr = z90crypt.device_p[indx]; | 
|  | if (devPtr && devPtr->disabled) { | 
|  | local_mask.st_mask[indx] = HD_NOT_THERE; | 
|  | return_unchanged = 0; | 
|  | } | 
|  | } | 
|  | } | 
|  | if (return_unchanged == 1) | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | spin_lock_irq(&queuespinlock); | 
|  | for (i = 0; i < z90crypt.max_count; i++) { | 
|  | oldStat = z90crypt.hdware_info->hdware_mask.st_mask[i]; | 
|  | newStat = local_mask.st_mask[i]; | 
|  | if ((oldStat == HD_ONLINE) && (newStat != HD_ONLINE)) | 
|  | destroy_crypto_device(i); | 
|  | else if ((oldStat != HD_ONLINE) && (newStat == HD_ONLINE)) { | 
|  | rv = create_crypto_device(i); | 
|  | if (rv >= REC_FATAL_ERROR) | 
|  | return rv; | 
|  | if (rv != 0) { | 
|  | local_mask.st_mask[i] = HD_NOT_THERE; | 
|  | local_mask.st_count--; | 
|  | } | 
|  | } | 
|  | } | 
|  | memcpy(z90crypt.hdware_info->hdware_mask.st_mask, local_mask.st_mask, | 
|  | sizeof(local_mask.st_mask)); | 
|  | z90crypt.hdware_info->hdware_mask.st_count = local_mask.st_count; | 
|  | z90crypt.hdware_info->hdware_mask.disabled_count = | 
|  | local_mask.disabled_count; | 
|  | refresh_index_array(&z90crypt.mask, &z90crypt.overall_device_x); | 
|  | for (i = 0; i < Z90CRYPT_NUM_TYPES; i++) | 
|  | refresh_index_array(&(z90crypt.hdware_info->type_mask[i]), | 
|  | &(z90crypt.hdware_info->type_x_addr[i])); | 
|  | spin_unlock_irq(&queuespinlock); | 
|  |  | 
|  | return rv; | 
|  | } | 
|  |  | 
|  | static int | 
|  | find_crypto_devices(struct status *deviceMask) | 
|  | { | 
|  | int i, q_depth, dev_type; | 
|  | enum hdstat hd_stat; | 
|  |  | 
|  | deviceMask->st_count = 0; | 
|  | deviceMask->disabled_count = 0; | 
|  | deviceMask->user_disabled_count = 0; | 
|  |  | 
|  | for (i = 0; i < z90crypt.max_count; i++) { | 
|  | hd_stat = query_online(i, z90crypt.cdx, MAX_RESET, &q_depth, | 
|  | &dev_type); | 
|  | if (hd_stat == HD_TSQ_EXCEPTION) { | 
|  | z90crypt.terminating = 1; | 
|  | PRINTKC("Exception during probe for crypto devices\n"); | 
|  | return TSQ_FATAL_ERROR; | 
|  | } | 
|  | deviceMask->st_mask[i] = hd_stat; | 
|  | if (hd_stat == HD_ONLINE) { | 
|  | PDEBUG("Got an online crypto!: %d\n", i); | 
|  | PDEBUG("Got a queue depth of %d\n", q_depth); | 
|  | PDEBUG("Got a device type of %d\n", dev_type); | 
|  | if (q_depth <= 0) | 
|  | return TSQ_FATAL_ERROR; | 
|  | deviceMask->st_count++; | 
|  | z90crypt.q_depth_array[i] = q_depth; | 
|  | z90crypt.dev_type_array[i] = dev_type; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | refresh_index_array(struct status *status_str, struct device_x *index_array) | 
|  | { | 
|  | int i, count; | 
|  | enum devstat stat; | 
|  |  | 
|  | i = -1; | 
|  | count = 0; | 
|  | do { | 
|  | stat = status_str->st_mask[++i]; | 
|  | if (stat == DEV_ONLINE) | 
|  | index_array->device_index[count++] = i; | 
|  | } while ((i < Z90CRYPT_NUM_DEVS) && (count < status_str->st_count)); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static int | 
|  | create_crypto_device(int index) | 
|  | { | 
|  | int rv, devstat, total_size; | 
|  | struct device *dev_ptr; | 
|  | struct status *type_str_p; | 
|  | int deviceType; | 
|  |  | 
|  | dev_ptr = z90crypt.device_p[index]; | 
|  | if (!dev_ptr) { | 
|  | total_size = sizeof(struct device) + | 
|  | z90crypt.q_depth_array[index] * sizeof(int); | 
|  |  | 
|  | dev_ptr = (struct device *) kmalloc(total_size, GFP_ATOMIC); | 
|  | if (!dev_ptr) { | 
|  | PRINTK("kmalloc device %d failed\n", index); | 
|  | return ENOMEM; | 
|  | } | 
|  | memset(dev_ptr, 0, total_size); | 
|  | dev_ptr->dev_resp_p = kmalloc(MAX_RESPONSE_SIZE, GFP_ATOMIC); | 
|  | if (!dev_ptr->dev_resp_p) { | 
|  | kfree(dev_ptr); | 
|  | PRINTK("kmalloc device %d rec buffer failed\n", index); | 
|  | return ENOMEM; | 
|  | } | 
|  | dev_ptr->dev_resp_l = MAX_RESPONSE_SIZE; | 
|  | INIT_LIST_HEAD(&(dev_ptr->dev_caller_list)); | 
|  | } | 
|  |  | 
|  | devstat = reset_device(index, z90crypt.cdx, MAX_RESET); | 
|  | if (devstat == DEV_RSQ_EXCEPTION) { | 
|  | PRINTK("exception during reset device %d\n", index); | 
|  | kfree(dev_ptr->dev_resp_p); | 
|  | kfree(dev_ptr); | 
|  | return RSQ_FATAL_ERROR; | 
|  | } | 
|  | if (devstat == DEV_ONLINE) { | 
|  | dev_ptr->dev_self_x = index; | 
|  | dev_ptr->dev_type = z90crypt.dev_type_array[index]; | 
|  | if (dev_ptr->dev_type == NILDEV) { | 
|  | rv = probe_device_type(dev_ptr); | 
|  | if (rv) { | 
|  | PRINTK("rv = %d from probe_device_type %d\n", | 
|  | rv, index); | 
|  | kfree(dev_ptr->dev_resp_p); | 
|  | kfree(dev_ptr); | 
|  | return rv; | 
|  | } | 
|  | } | 
|  | if (dev_ptr->dev_type == PCIXCC_UNK) { | 
|  | rv = probe_PCIXCC_type(dev_ptr); | 
|  | if (rv) { | 
|  | PRINTK("rv = %d from probe_PCIXCC_type %d\n", | 
|  | rv, index); | 
|  | kfree(dev_ptr->dev_resp_p); | 
|  | kfree(dev_ptr); | 
|  | return rv; | 
|  | } | 
|  | } | 
|  | deviceType = dev_ptr->dev_type; | 
|  | z90crypt.dev_type_array[index] = deviceType; | 
|  | if (deviceType == PCICA) | 
|  | z90crypt.hdware_info->device_type_array[index] = 1; | 
|  | else if (deviceType == PCICC) | 
|  | z90crypt.hdware_info->device_type_array[index] = 2; | 
|  | else if (deviceType == PCIXCC_MCL2) | 
|  | z90crypt.hdware_info->device_type_array[index] = 3; | 
|  | else if (deviceType == PCIXCC_MCL3) | 
|  | z90crypt.hdware_info->device_type_array[index] = 4; | 
|  | else if (deviceType == CEX2C) | 
|  | z90crypt.hdware_info->device_type_array[index] = 5; | 
|  | else | 
|  | z90crypt.hdware_info->device_type_array[index] = -1; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * 'q_depth' returned by the hardware is one less than | 
|  | * the actual depth | 
|  | */ | 
|  | dev_ptr->dev_q_depth = z90crypt.q_depth_array[index]; | 
|  | dev_ptr->dev_type = z90crypt.dev_type_array[index]; | 
|  | dev_ptr->dev_stat = devstat; | 
|  | dev_ptr->disabled = 0; | 
|  | z90crypt.device_p[index] = dev_ptr; | 
|  |  | 
|  | if (devstat == DEV_ONLINE) { | 
|  | if (z90crypt.mask.st_mask[index] != DEV_ONLINE) { | 
|  | z90crypt.mask.st_mask[index] = DEV_ONLINE; | 
|  | z90crypt.mask.st_count++; | 
|  | } | 
|  | deviceType = dev_ptr->dev_type; | 
|  | type_str_p = &z90crypt.hdware_info->type_mask[deviceType]; | 
|  | if (type_str_p->st_mask[index] != DEV_ONLINE) { | 
|  | type_str_p->st_mask[index] = DEV_ONLINE; | 
|  | type_str_p->st_count++; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | destroy_crypto_device(int index) | 
|  | { | 
|  | struct device *dev_ptr; | 
|  | int t, disabledFlag; | 
|  |  | 
|  | dev_ptr = z90crypt.device_p[index]; | 
|  |  | 
|  | /* remember device type; get rid of device struct */ | 
|  | if (dev_ptr) { | 
|  | disabledFlag = dev_ptr->disabled; | 
|  | t = dev_ptr->dev_type; | 
|  | if (dev_ptr->dev_resp_p) | 
|  | kfree(dev_ptr->dev_resp_p); | 
|  | kfree(dev_ptr); | 
|  | } else { | 
|  | disabledFlag = 0; | 
|  | t = -1; | 
|  | } | 
|  | z90crypt.device_p[index] = 0; | 
|  |  | 
|  | /* if the type is valid, remove the device from the type_mask */ | 
|  | if ((t != -1) && z90crypt.hdware_info->type_mask[t].st_mask[index]) { | 
|  | z90crypt.hdware_info->type_mask[t].st_mask[index] = 0x00; | 
|  | z90crypt.hdware_info->type_mask[t].st_count--; | 
|  | if (disabledFlag == 1) | 
|  | z90crypt.hdware_info->type_mask[t].disabled_count--; | 
|  | } | 
|  | if (z90crypt.mask.st_mask[index] != DEV_GONE) { | 
|  | z90crypt.mask.st_mask[index] = DEV_GONE; | 
|  | z90crypt.mask.st_count--; | 
|  | } | 
|  | z90crypt.hdware_info->device_type_array[index] = 0; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void | 
|  | destroy_z90crypt(void) | 
|  | { | 
|  | int i; | 
|  | for (i = 0; i < z90crypt.max_count; i++) | 
|  | if (z90crypt.device_p[i]) | 
|  | destroy_crypto_device(i); | 
|  | if (z90crypt.hdware_info) | 
|  | kfree((void *)z90crypt.hdware_info); | 
|  | memset((void *)&z90crypt, 0, sizeof(z90crypt)); | 
|  | } | 
|  |  | 
|  | static unsigned char static_testmsg[384] = { | 
|  | 0x00,0x00,0x00,0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x00,0x06,0x00,0x00, | 
|  | 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x58, | 
|  | 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x43,0x43, | 
|  | 0x41,0x2d,0x41,0x50,0x50,0x4c,0x20,0x20,0x20,0x01,0x01,0x01,0x00,0x00,0x00,0x00, | 
|  | 0x50,0x4b,0x00,0x00,0x00,0x00,0x01,0x1c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, | 
|  | 0x00,0x00,0x00,0x00,0x00,0x00,0x05,0xb8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, | 
|  | 0x00,0x00,0x00,0x00,0x70,0x00,0x41,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x54,0x32, | 
|  | 0x01,0x00,0xa0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, | 
|  | 0xb8,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, | 
|  | 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, | 
|  | 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, | 
|  | 0x00,0x00,0x00,0x00,0x00,0x00,0x0a,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, | 
|  | 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x00,0x49,0x43,0x53,0x46, | 
|  | 0x20,0x20,0x20,0x20,0x50,0x4b,0x0a,0x00,0x50,0x4b,0x43,0x53,0x2d,0x31,0x2e,0x32, | 
|  | 0x37,0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0x00,0x11,0x22,0x33,0x44, | 
|  | 0x55,0x66,0x77,0x88,0x99,0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0x00, | 
|  | 0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0x00,0x11,0x22,0x33,0x44,0x55,0x66, | 
|  | 0x77,0x88,0x99,0x00,0x11,0x22,0x33,0x5d,0x00,0x5b,0x00,0x77,0x88,0x1e,0x00,0x00, | 
|  | 0x57,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x4f,0x00,0x00,0x00,0x03,0x02,0x00,0x00, | 
|  | 0x40,0x01,0x00,0x01,0xce,0x02,0x68,0x2d,0x5f,0xa9,0xde,0x0c,0xf6,0xd2,0x7b,0x58, | 
|  | 0x4b,0xf9,0x28,0x68,0x3d,0xb4,0xf4,0xef,0x78,0xd5,0xbe,0x66,0x63,0x42,0xef,0xf8, | 
|  | 0xfd,0xa4,0xf8,0xb0,0x8e,0x29,0xc2,0xc9,0x2e,0xd8,0x45,0xb8,0x53,0x8c,0x6f,0x4e, | 
|  | 0x72,0x8f,0x6c,0x04,0x9c,0x88,0xfc,0x1e,0xc5,0x83,0x55,0x57,0xf7,0xdd,0xfd,0x4f, | 
|  | 0x11,0x36,0x95,0x5d,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 | 
|  | }; | 
|  |  | 
|  | static int | 
|  | probe_device_type(struct device *devPtr) | 
|  | { | 
|  | int rv, dv, i, index, length; | 
|  | unsigned char psmid[8]; | 
|  | static unsigned char loc_testmsg[sizeof(static_testmsg)]; | 
|  |  | 
|  | index = devPtr->dev_self_x; | 
|  | rv = 0; | 
|  | do { | 
|  | memcpy(loc_testmsg, static_testmsg, sizeof(static_testmsg)); | 
|  | length = sizeof(static_testmsg) - 24; | 
|  | /* the -24 allows for the header */ | 
|  | dv = send_to_AP(index, z90crypt.cdx, length, loc_testmsg); | 
|  | if (dv) { | 
|  | PDEBUG("dv returned by send during probe: %d\n", dv); | 
|  | if (dv == DEV_SEN_EXCEPTION) { | 
|  | rv = SEN_FATAL_ERROR; | 
|  | PRINTKC("exception in send to AP %d\n", index); | 
|  | break; | 
|  | } | 
|  | PDEBUG("return value from send_to_AP: %d\n", rv); | 
|  | switch (dv) { | 
|  | case DEV_GONE: | 
|  | PDEBUG("dev %d not available\n", index); | 
|  | rv = SEN_NOT_AVAIL; | 
|  | break; | 
|  | case DEV_ONLINE: | 
|  | rv = 0; | 
|  | break; | 
|  | case DEV_EMPTY: | 
|  | rv = SEN_NOT_AVAIL; | 
|  | break; | 
|  | case DEV_NO_WORK: | 
|  | rv = SEN_FATAL_ERROR; | 
|  | break; | 
|  | case DEV_BAD_MESSAGE: | 
|  | rv = SEN_USER_ERROR; | 
|  | break; | 
|  | case DEV_QUEUE_FULL: | 
|  | rv = SEN_QUEUE_FULL; | 
|  | break; | 
|  | default: | 
|  | PRINTK("unknown dv=%d for dev %d\n", dv, index); | 
|  | rv = SEN_NOT_AVAIL; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (rv) | 
|  | break; | 
|  |  | 
|  | for (i = 0; i < 6; i++) { | 
|  | mdelay(300); | 
|  | dv = receive_from_AP(index, z90crypt.cdx, | 
|  | devPtr->dev_resp_l, | 
|  | devPtr->dev_resp_p, psmid); | 
|  | PDEBUG("dv returned by DQ = %d\n", dv); | 
|  | if (dv == DEV_REC_EXCEPTION) { | 
|  | rv = REC_FATAL_ERROR; | 
|  | PRINTKC("exception in dequeue %d\n", | 
|  | index); | 
|  | break; | 
|  | } | 
|  | switch (dv) { | 
|  | case DEV_ONLINE: | 
|  | rv = 0; | 
|  | break; | 
|  | case DEV_EMPTY: | 
|  | rv = REC_EMPTY; | 
|  | break; | 
|  | case DEV_NO_WORK: | 
|  | rv = REC_NO_WORK; | 
|  | break; | 
|  | case DEV_BAD_MESSAGE: | 
|  | case DEV_GONE: | 
|  | default: | 
|  | rv = REC_NO_RESPONSE; | 
|  | break; | 
|  | } | 
|  | if ((rv != 0) && (rv != REC_NO_WORK)) | 
|  | break; | 
|  | if (rv == 0) | 
|  | break; | 
|  | } | 
|  | if (rv) | 
|  | break; | 
|  | rv = (devPtr->dev_resp_p[0] == 0x00) && | 
|  | (devPtr->dev_resp_p[1] == 0x86); | 
|  | if (rv) | 
|  | devPtr->dev_type = PCICC; | 
|  | else | 
|  | devPtr->dev_type = PCICA; | 
|  | rv = 0; | 
|  | } while (0); | 
|  | /* In a general error case, the card is not marked online */ | 
|  | return rv; | 
|  | } | 
|  |  | 
|  | static unsigned char MCL3_testmsg[] = { | 
|  | 0x00,0x00,0x00,0x00,0xEE,0xEE,0xEE,0xEE,0xEE,0xEE,0xEE,0xEE, | 
|  | 0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, | 
|  | 0x00,0x00,0x00,0x58,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, | 
|  | 0x43,0x41,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, | 
|  | 0x00,0x00,0x00,0x00,0x50,0x4B,0x00,0x00,0x00,0x00,0x01,0xC4,0x00,0x00,0x00,0x00, | 
|  | 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x24,0x00,0x00,0x00,0x00, | 
|  | 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xDC,0x02,0x00,0x00,0x00,0x54,0x32, | 
|  | 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xE8,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x24, | 
|  | 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, | 
|  | 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, | 
|  | 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, | 
|  | 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, | 
|  | 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, | 
|  | 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, | 
|  | 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, | 
|  | 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, | 
|  | 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, | 
|  | 0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, | 
|  | 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, | 
|  | 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, | 
|  | 0x00,0x00,0x00,0x00,0x50,0x4B,0x00,0x0A,0x4D,0x52,0x50,0x20,0x20,0x20,0x20,0x20, | 
|  | 0x00,0x42,0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0x0A,0x0B,0x0C,0x0D, | 
|  | 0x0E,0x0F,0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0xAA,0xBB,0xCC,0xDD, | 
|  | 0xEE,0xFF,0xFF,0xEE,0xDD,0xCC,0xBB,0xAA,0x99,0x88,0x77,0x66,0x55,0x44,0x33,0x22, | 
|  | 0x11,0x00,0x01,0x23,0x45,0x67,0x89,0xAB,0xCD,0xEF,0xFE,0xDC,0xBA,0x98,0x76,0x54, | 
|  | 0x32,0x10,0x00,0x9A,0x00,0x98,0x00,0x00,0x1E,0x00,0x00,0x94,0x00,0x00,0x00,0x00, | 
|  | 0x04,0x00,0x00,0x8C,0x00,0x00,0x00,0x40,0x02,0x00,0x00,0x40,0xBA,0xE8,0x23,0x3C, | 
|  | 0x75,0xF3,0x91,0x61,0xD6,0x73,0x39,0xCF,0x7B,0x6D,0x8E,0x61,0x97,0x63,0x9E,0xD9, | 
|  | 0x60,0x55,0xD6,0xC7,0xEF,0xF8,0x1E,0x63,0x95,0x17,0xCC,0x28,0x45,0x60,0x11,0xC5, | 
|  | 0xC4,0x4E,0x66,0xC6,0xE6,0xC3,0xDE,0x8A,0x19,0x30,0xCF,0x0E,0xD7,0xAA,0xDB,0x01, | 
|  | 0xD8,0x00,0xBB,0x8F,0x39,0x9F,0x64,0x28,0xF5,0x7A,0x77,0x49,0xCC,0x6B,0xA3,0x91, | 
|  | 0x97,0x70,0xE7,0x60,0x1E,0x39,0xE1,0xE5,0x33,0xE1,0x15,0x63,0x69,0x08,0x80,0x4C, | 
|  | 0x67,0xC4,0x41,0x8F,0x48,0xDF,0x26,0x98,0xF1,0xD5,0x8D,0x88,0xD9,0x6A,0xA4,0x96, | 
|  | 0xC5,0x84,0xD9,0x30,0x49,0x67,0x7D,0x19,0xB1,0xB3,0x45,0x4D,0xB2,0x53,0x9A,0x47, | 
|  | 0x3C,0x7C,0x55,0xBF,0xCC,0x85,0x00,0x36,0xF1,0x3D,0x93,0x53 | 
|  | }; | 
|  |  | 
|  | static int | 
|  | probe_PCIXCC_type(struct device *devPtr) | 
|  | { | 
|  | int rv, dv, i, index, length; | 
|  | unsigned char psmid[8]; | 
|  | static unsigned char loc_testmsg[548]; | 
|  | struct CPRBX *cprbx_p; | 
|  |  | 
|  | index = devPtr->dev_self_x; | 
|  | rv = 0; | 
|  | do { | 
|  | memcpy(loc_testmsg, MCL3_testmsg, sizeof(MCL3_testmsg)); | 
|  | length = sizeof(MCL3_testmsg) - 0x0C; | 
|  | dv = send_to_AP(index, z90crypt.cdx, length, loc_testmsg); | 
|  | if (dv) { | 
|  | PDEBUG("dv returned = %d\n", dv); | 
|  | if (dv == DEV_SEN_EXCEPTION) { | 
|  | rv = SEN_FATAL_ERROR; | 
|  | PRINTKC("exception in send to AP %d\n", index); | 
|  | break; | 
|  | } | 
|  | PDEBUG("return value from send_to_AP: %d\n", rv); | 
|  | switch (dv) { | 
|  | case DEV_GONE: | 
|  | PDEBUG("dev %d not available\n", index); | 
|  | rv = SEN_NOT_AVAIL; | 
|  | break; | 
|  | case DEV_ONLINE: | 
|  | rv = 0; | 
|  | break; | 
|  | case DEV_EMPTY: | 
|  | rv = SEN_NOT_AVAIL; | 
|  | break; | 
|  | case DEV_NO_WORK: | 
|  | rv = SEN_FATAL_ERROR; | 
|  | break; | 
|  | case DEV_BAD_MESSAGE: | 
|  | rv = SEN_USER_ERROR; | 
|  | break; | 
|  | case DEV_QUEUE_FULL: | 
|  | rv = SEN_QUEUE_FULL; | 
|  | break; | 
|  | default: | 
|  | PRINTK("unknown dv=%d for dev %d\n", dv, index); | 
|  | rv = SEN_NOT_AVAIL; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (rv) | 
|  | break; | 
|  |  | 
|  | for (i = 0; i < 6; i++) { | 
|  | mdelay(300); | 
|  | dv = receive_from_AP(index, z90crypt.cdx, | 
|  | devPtr->dev_resp_l, | 
|  | devPtr->dev_resp_p, psmid); | 
|  | PDEBUG("dv returned by DQ = %d\n", dv); | 
|  | if (dv == DEV_REC_EXCEPTION) { | 
|  | rv = REC_FATAL_ERROR; | 
|  | PRINTKC("exception in dequeue %d\n", | 
|  | index); | 
|  | break; | 
|  | } | 
|  | switch (dv) { | 
|  | case DEV_ONLINE: | 
|  | rv = 0; | 
|  | break; | 
|  | case DEV_EMPTY: | 
|  | rv = REC_EMPTY; | 
|  | break; | 
|  | case DEV_NO_WORK: | 
|  | rv = REC_NO_WORK; | 
|  | break; | 
|  | case DEV_BAD_MESSAGE: | 
|  | case DEV_GONE: | 
|  | default: | 
|  | rv = REC_NO_RESPONSE; | 
|  | break; | 
|  | } | 
|  | if ((rv != 0) && (rv != REC_NO_WORK)) | 
|  | break; | 
|  | if (rv == 0) | 
|  | break; | 
|  | } | 
|  | if (rv) | 
|  | break; | 
|  | cprbx_p = (struct CPRBX *) (devPtr->dev_resp_p + 48); | 
|  | if ((cprbx_p->ccp_rtcode == 8) && (cprbx_p->ccp_rscode == 33)) { | 
|  | devPtr->dev_type = PCIXCC_MCL2; | 
|  | PDEBUG("device %d is MCL2\n", index); | 
|  | } else { | 
|  | devPtr->dev_type = PCIXCC_MCL3; | 
|  | PDEBUG("device %d is MCL3\n", index); | 
|  | } | 
|  | } while (0); | 
|  | /* In a general error case, the card is not marked online */ | 
|  | return rv; | 
|  | } | 
|  |  | 
|  | #ifdef Z90CRYPT_USE_HOTPLUG | 
|  | static void | 
|  | z90crypt_hotplug_event(int dev_major, int dev_minor, int action) | 
|  | { | 
|  | #ifdef CONFIG_HOTPLUG | 
|  | char *argv[3]; | 
|  | char *envp[6]; | 
|  | char  major[20]; | 
|  | char  minor[20]; | 
|  |  | 
|  | sprintf(major, "MAJOR=%d", dev_major); | 
|  | sprintf(minor, "MINOR=%d", dev_minor); | 
|  |  | 
|  | argv[0] = hotplug_path; | 
|  | argv[1] = "z90crypt"; | 
|  | argv[2] = 0; | 
|  |  | 
|  | envp[0] = "HOME=/"; | 
|  | envp[1] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin"; | 
|  |  | 
|  | switch (action) { | 
|  | case Z90CRYPT_HOTPLUG_ADD: | 
|  | envp[2] = "ACTION=add"; | 
|  | break; | 
|  | case Z90CRYPT_HOTPLUG_REMOVE: | 
|  | envp[2] = "ACTION=remove"; | 
|  | break; | 
|  | default: | 
|  | BUG(); | 
|  | break; | 
|  | } | 
|  | envp[3] = major; | 
|  | envp[4] = minor; | 
|  | envp[5] = 0; | 
|  |  | 
|  | call_usermodehelper(argv[0], argv, envp, 0); | 
|  | #endif | 
|  | } | 
|  | #endif | 
|  |  | 
|  | module_init(z90crypt_init_module); | 
|  | module_exit(z90crypt_cleanup_module); |