Gitiles
Code Review Sign In
review.evervolv.com / android_kernel_htc_msm8960 / 854af9578cb84e4ca3cb1551a6be40c4e81bb455 / . / drivers / scsi / aic7xxx / aiclib.c
blob: 7c5a6db0e6724c5a0aa933575f57bc603090609b [file] [log] [blame]
/*
* Implementation of Utility functions for all SCSI device types.
*
* Copyright (c) 1997, 1998, 1999 Justin T. Gibbs.
* Copyright (c) 1997, 1998 Kenneth D. Merry.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD: src/sys/cam/scsi/scsi_all.c,v 1.38 2002/09/23 04:56:35 mjacob Exp $
* $Id$
*/
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/version.h>
/* Core SCSI definitions */
#include <scsi/scsi_host.h>
#include "aiclib.h"
#include "cam.h"
#ifndef FALSE
#define FALSE 0
#endif /* FALSE */
#ifndef TRUE
#define TRUE 1
#endif /* TRUE */
#ifndef ERESTART
#define ERESTART -1 /* restart syscall */
#endif
#ifndef EJUSTRETURN
#define EJUSTRETURN -2 /* don't modify regs, just return */
#endif
static int ascentrycomp(const void *key, const void *member);
static int senseentrycomp(const void *key, const void *member);
static void fetchtableentries(int sense_key, int asc, int ascq,
struct scsi_inquiry_data *,
const struct sense_key_table_entry **,
const struct asc_table_entry **);
static void * scsibsearch(const void *key, const void *base, size_t nmemb,
size_t size,
int (*compar)(const void *, const void *));
typedef int (cam_quirkmatch_t)(caddr_t, caddr_t);
static int cam_strmatch(const u_int8_t *str, const u_int8_t *pattern,
int str_len);
static caddr_t cam_quirkmatch(caddr_t target, caddr_t quirk_table,
int num_entries, int entry_size,
cam_quirkmatch_t *comp_func);
#define SCSI_NO_SENSE_STRINGS 1
#if !defined(SCSI_NO_SENSE_STRINGS)
#define SST(asc, ascq, action, desc) \
asc, ascq, action, desc
#else
static const char empty_string[] = "";
#define SST(asc, ascq, action, desc) \
asc, ascq, action, empty_string
#endif
static const struct sense_key_table_entry sense_key_table[] =
{
{ SSD_KEY_NO_SENSE, SS_NOP, "NO SENSE" },
{ SSD_KEY_RECOVERED_ERROR, SS_NOP|SSQ_PRINT_SENSE, "RECOVERED ERROR" },
{
SSD_KEY_NOT_READY, SS_TUR|SSQ_MANY|SSQ_DECREMENT_COUNT|EBUSY,
"NOT READY"
},
{ SSD_KEY_MEDIUM_ERROR, SS_RDEF, "MEDIUM ERROR" },
{ SSD_KEY_HARDWARE_ERROR, SS_RDEF, "HARDWARE FAILURE" },
{ SSD_KEY_ILLEGAL_REQUEST, SS_FATAL|EINVAL, "ILLEGAL REQUEST" },
{ SSD_KEY_UNIT_ATTENTION, SS_FATAL|ENXIO, "UNIT ATTENTION" },
{ SSD_KEY_DATA_PROTECT, SS_FATAL|EACCES, "DATA PROTECT" },
{ SSD_KEY_BLANK_CHECK, SS_FATAL|ENOSPC, "BLANK CHECK" },
{ SSD_KEY_Vendor_Specific, SS_FATAL|EIO, "Vendor Specific" },
{ SSD_KEY_COPY_ABORTED, SS_FATAL|EIO, "COPY ABORTED" },
{ SSD_KEY_ABORTED_COMMAND, SS_RDEF, "ABORTED COMMAND" },
{ SSD_KEY_EQUAL, SS_NOP, "EQUAL" },
{ SSD_KEY_VOLUME_OVERFLOW, SS_FATAL|EIO, "VOLUME OVERFLOW" },
{ SSD_KEY_MISCOMPARE, SS_NOP, "MISCOMPARE" },
{ SSD_KEY_RESERVED, SS_FATAL|EIO, "RESERVED" }
};
static const int sense_key_table_size =
sizeof(sense_key_table)/sizeof(sense_key_table[0]);
static struct asc_table_entry quantum_fireball_entries[] = {
{SST(0x04, 0x0b, SS_START|SSQ_DECREMENT_COUNT|ENXIO,
"Logical unit not ready, initializing cmd. required")}
};
static struct asc_table_entry sony_mo_entries[] = {
{SST(0x04, 0x00, SS_START|SSQ_DECREMENT_COUNT|ENXIO,
"Logical unit not ready, cause not reportable")}
};
static struct scsi_sense_quirk_entry sense_quirk_table[] = {
{
/*
* The Quantum Fireball ST and SE like to return 0x04 0x0b when
* they really should return 0x04 0x02. 0x04,0x0b isn't
* defined in any SCSI spec, and it isn't mentioned in the
* hardware manual for these drives.
*/
{T_DIRECT, SIP_MEDIA_FIXED, "QUANTUM", "FIREBALL S*", "*"},
/*num_sense_keys*/0,
sizeof(quantum_fireball_entries)/sizeof(struct asc_table_entry),
/*sense key entries*/NULL,
quantum_fireball_entries
},
{
/*
* This Sony MO drive likes to return 0x04, 0x00 when it
* isn't spun up.
*/
{T_DIRECT, SIP_MEDIA_REMOVABLE, "SONY", "SMO-*", "*"},
/*num_sense_keys*/0,
sizeof(sony_mo_entries)/sizeof(struct asc_table_entry),
/*sense key entries*/NULL,
sony_mo_entries
}
};
static const int sense_quirk_table_size =
sizeof(sense_quirk_table)/sizeof(sense_quirk_table[0]);
static struct asc_table_entry asc_table[] = {
/*
* From File: ASC-NUM.TXT
* SCSI ASC/ASCQ Assignments
* Numeric Sorted Listing
* as of 5/12/97
*
* D - DIRECT ACCESS DEVICE (SBC) device column key
* .T - SEQUENTIAL ACCESS DEVICE (SSC) -------------------
* . L - PRINTER DEVICE (SSC) blank = reserved
* . P - PROCESSOR DEVICE (SPC) not blank = allowed
* . .W - WRITE ONCE READ MULTIPLE DEVICE (SBC)
* . . R - CD DEVICE (MMC)
* . . S - SCANNER DEVICE (SGC)
* . . .O - OPTICAL MEMORY DEVICE (SBC)
* . . . M - MEDIA CHANGER DEVICE (SMC)
* . . . C - COMMUNICATION DEVICE (SSC)
* . . . .A - STORAGE ARRAY DEVICE (SCC)
* . . . . E - ENCLOSURE SERVICES DEVICE (SES)
* DTLPWRSOMCAE ASC ASCQ Action Description
* ------------ ---- ---- ------ -----------------------------------*/
/* DTLPWRSOMCAE */{SST(0x00, 0x00, SS_NOP,
"No additional sense information") },
/* T S */{SST(0x00, 0x01, SS_RDEF,
"Filemark detected") },
/* T S */{SST(0x00, 0x02, SS_RDEF,
"End-of-partition/medium detected") },
/* T */{SST(0x00, 0x03, SS_RDEF,
"Setmark detected") },
/* T S */{SST(0x00, 0x04, SS_RDEF,
"Beginning-of-partition/medium detected") },
/* T S */{SST(0x00, 0x05, SS_RDEF,
"End-of-data detected") },
/* DTLPWRSOMCAE */{SST(0x00, 0x06, SS_RDEF,
"I/O process terminated") },
/* R */{SST(0x00, 0x11, SS_FATAL|EBUSY,
"Audio play operation in progress") },
/* R */{SST(0x00, 0x12, SS_NOP,
"Audio play operation paused") },
/* R */{SST(0x00, 0x13, SS_NOP,
"Audio play operation successfully completed") },
/* R */{SST(0x00, 0x14, SS_RDEF,
"Audio play operation stopped due to error") },
/* R */{SST(0x00, 0x15, SS_NOP,
"No current audio status to return") },
/* DTLPWRSOMCAE */{SST(0x00, 0x16, SS_FATAL|EBUSY,
"Operation in progress") },
/* DTL WRSOM AE */{SST(0x00, 0x17, SS_RDEF,
"Cleaning requested") },
/* D W O */{SST(0x01, 0x00, SS_RDEF,
"No index/sector signal") },
/* D WR OM */{SST(0x02, 0x00, SS_RDEF,
"No seek complete") },
/* DTL W SO */{SST(0x03, 0x00, SS_RDEF,
"Peripheral device write fault") },
/* T */{SST(0x03, 0x01, SS_RDEF,
"No write current") },
/* T */{SST(0x03, 0x02, SS_RDEF,
"Excessive write errors") },
/* DTLPWRSOMCAE */{SST(0x04, 0x00,
SS_TUR|SSQ_DELAY|SSQ_MANY|SSQ_DECREMENT_COUNT|EIO,
"Logical unit not ready, cause not reportable") },
/* DTLPWRSOMCAE */{SST(0x04, 0x01,
SS_TUR|SSQ_DELAY|SSQ_MANY|SSQ_DECREMENT_COUNT|EBUSY,
"Logical unit is in process of becoming ready") },
/* DTLPWRSOMCAE */{SST(0x04, 0x02, SS_START|SSQ_DECREMENT_COUNT|ENXIO,
"Logical unit not ready, initializing cmd. required") },
/* DTLPWRSOMCAE */{SST(0x04, 0x03, SS_FATAL|ENXIO,
"Logical unit not ready, manual intervention required")},
/* DTL O */{SST(0x04, 0x04, SS_FATAL|EBUSY,
"Logical unit not ready, format in progress") },
/* DT W OMCA */{SST(0x04, 0x05, SS_FATAL|EBUSY,
"Logical unit not ready, rebuild in progress") },
/* DT W OMCA */{SST(0x04, 0x06, SS_FATAL|EBUSY,
"Logical unit not ready, recalculation in progress") },
/* DTLPWRSOMCAE */{SST(0x04, 0x07, SS_FATAL|EBUSY,
"Logical unit not ready, operation in progress") },
/* R */{SST(0x04, 0x08, SS_FATAL|EBUSY,
"Logical unit not ready, long write in progress") },
/* DTL WRSOMCAE */{SST(0x05, 0x00, SS_RDEF,
"Logical unit does not respond to selection") },
/* D WR OM */{SST(0x06, 0x00, SS_RDEF,
"No reference position found") },
/* DTL WRSOM */{SST(0x07, 0x00, SS_RDEF,
"Multiple peripheral devices selected") },
/* DTL WRSOMCAE */{SST(0x08, 0x00, SS_RDEF,
"Logical unit communication failure") },
/* DTL WRSOMCAE */{SST(0x08, 0x01, SS_RDEF,
"Logical unit communication time-out") },
/* DTL WRSOMCAE */{SST(0x08, 0x02, SS_RDEF,
"Logical unit communication parity error") },
/* DT R OM */{SST(0x08, 0x03, SS_RDEF,
"Logical unit communication crc error (ultra-dma/32)")},
/* DT WR O */{SST(0x09, 0x00, SS_RDEF,
"Track following error") },
/* WR O */{SST(0x09, 0x01, SS_RDEF,
"Tracking servo failure") },
/* WR O */{SST(0x09, 0x02, SS_RDEF,
"Focus servo failure") },
/* WR O */{SST(0x09, 0x03, SS_RDEF,
"Spindle servo failure") },
/* DT WR O */{SST(0x09, 0x04, SS_RDEF,
"Head select fault") },
/* DTLPWRSOMCAE */{SST(0x0A, 0x00, SS_FATAL|ENOSPC,
"Error log overflow") },
/* DTLPWRSOMCAE */{SST(0x0B, 0x00, SS_RDEF,
"Warning") },
/* DTLPWRSOMCAE */{SST(0x0B, 0x01, SS_RDEF,
"Specified temperature exceeded") },
/* DTLPWRSOMCAE */{SST(0x0B, 0x02, SS_RDEF,
"Enclosure degraded") },
/* T RS */{SST(0x0C, 0x00, SS_RDEF,
"Write error") },
/* D W O */{SST(0x0C, 0x01, SS_NOP|SSQ_PRINT_SENSE,
"Write error - recovered with auto reallocation") },
/* D W O */{SST(0x0C, 0x02, SS_RDEF,
"Write error - auto reallocation failed") },
/* D W O */{SST(0x0C, 0x03, SS_RDEF,
"Write error - recommend reassignment") },
/* DT W O */{SST(0x0C, 0x04, SS_RDEF,
"Compression check miscompare error") },
/* DT W O */{SST(0x0C, 0x05, SS_RDEF,
"Data expansion occurred during compression") },
/* DT W O */{SST(0x0C, 0x06, SS_RDEF,
"Block not compressible") },
/* R */{SST(0x0C, 0x07, SS_RDEF,
"Write error - recovery needed") },
/* R */{SST(0x0C, 0x08, SS_RDEF,
"Write error - recovery failed") },
/* R */{SST(0x0C, 0x09, SS_RDEF,
"Write error - loss of streaming") },
/* R */{SST(0x0C, 0x0A, SS_RDEF,
"Write error - padding blocks added") },
/* D W O */{SST(0x10, 0x00, SS_RDEF,
"ID CRC or ECC error") },
/* DT WRSO */{SST(0x11, 0x00, SS_RDEF,
"Unrecovered read error") },
/* DT W SO */{SST(0x11, 0x01, SS_RDEF,
"Read retries exhausted") },
/* DT W SO */{SST(0x11, 0x02, SS_RDEF,
"Error too long to correct") },
/* DT W SO */{SST(0x11, 0x03, SS_RDEF,
"Multiple read errors") },
/* D W O */{SST(0x11, 0x04, SS_RDEF,
"Unrecovered read error - auto reallocate failed") },
/* WR O */{SST(0x11, 0x05, SS_RDEF,
"L-EC uncorrectable error") },
/* WR O */{SST(0x11, 0x06, SS_RDEF,
"CIRC unrecovered error") },
/* W O */{SST(0x11, 0x07, SS_RDEF,
"Data re-synchronization error") },
/* T */{SST(0x11, 0x08, SS_RDEF,
"Incomplete block read") },
/* T */{SST(0x11, 0x09, SS_RDEF,
"No gap found") },
/* DT O */{SST(0x11, 0x0A, SS_RDEF,
"Miscorrected error") },
/* D W O */{SST(0x11, 0x0B, SS_RDEF,
"Unrecovered read error - recommend reassignment") },
/* D W O */{SST(0x11, 0x0C, SS_RDEF,
"Unrecovered read error - recommend rewrite the data")},
/* DT WR O */{SST(0x11, 0x0D, SS_RDEF,
"De-compression CRC error") },
/* DT WR O */{SST(0x11, 0x0E, SS_RDEF,
"Cannot decompress using declared algorithm") },
/* R */{SST(0x11, 0x0F, SS_RDEF,
"Error reading UPC/EAN number") },
/* R */{SST(0x11, 0x10, SS_RDEF,
"Error reading ISRC number") },
/* R */{SST(0x11, 0x11, SS_RDEF,
"Read error - loss of streaming") },
/* D W O */{SST(0x12, 0x00, SS_RDEF,
"Address mark not found for id field") },
/* D W O */{SST(0x13, 0x00, SS_RDEF,
"Address mark not found for data field") },
/* DTL WRSO */{SST(0x14, 0x00, SS_RDEF,
"Recorded entity not found") },
/* DT WR O */{SST(0x14, 0x01, SS_RDEF,
"Record not found") },
/* T */{SST(0x14, 0x02, SS_RDEF,
"Filemark or setmark not found") },
/* T */{SST(0x14, 0x03, SS_RDEF,
"End-of-data not found") },
/* T */{SST(0x14, 0x04, SS_RDEF,
"Block sequence error") },
/* DT W O */{SST(0x14, 0x05, SS_RDEF,
"Record not found - recommend reassignment") },
/* DT W O */{SST(0x14, 0x06, SS_RDEF,
"Record not found - data auto-reallocated") },
/* DTL WRSOM */{SST(0x15, 0x00, SS_RDEF,
"Random positioning error") },
/* DTL WRSOM */{SST(0x15, 0x01, SS_RDEF,
"Mechanical positioning error") },
/* DT WR O */{SST(0x15, 0x02, SS_RDEF,
"Positioning error detected by read of medium") },
/* D W O */{SST(0x16, 0x00, SS_RDEF,
"Data synchronization mark error") },
/* D W O */{SST(0x16, 0x01, SS_RDEF,
"Data sync error - data rewritten") },
/* D W O */{SST(0x16, 0x02, SS_RDEF,
"Data sync error - recommend rewrite") },
/* D W O */{SST(0x16, 0x03, SS_NOP|SSQ_PRINT_SENSE,
"Data sync error - data auto-reallocated") },
/* D W O */{SST(0x16, 0x04, SS_RDEF,
"Data sync error - recommend reassignment") },
/* DT WRSO */{SST(0x17, 0x00, SS_NOP|SSQ_PRINT_SENSE,
"Recovered data with no error correction applied") },
/* DT WRSO */{SST(0x17, 0x01, SS_NOP|SSQ_PRINT_SENSE,
"Recovered data with retries") },
/* DT WR O */{SST(0x17, 0x02, SS_NOP|SSQ_PRINT_SENSE,
"Recovered data with positive head offset") },
/* DT WR O */{SST(0x17, 0x03, SS_NOP|SSQ_PRINT_SENSE,
"Recovered data with negative head offset") },
/* WR O */{SST(0x17, 0x04, SS_NOP|SSQ_PRINT_SENSE,
"Recovered data with retries and/or CIRC applied") },
/* D WR O */{SST(0x17, 0x05, SS_NOP|SSQ_PRINT_SENSE,
"Recovered data using previous sector id") },
/* D W O */{SST(0x17, 0x06, SS_NOP|SSQ_PRINT_SENSE,
"Recovered data without ECC - data auto-reallocated") },
/* D W O */{SST(0x17, 0x07, SS_NOP|SSQ_PRINT_SENSE,
"Recovered data without ECC - recommend reassignment")},
/* D W O */{SST(0x17, 0x08, SS_NOP|SSQ_PRINT_SENSE,
"Recovered data without ECC - recommend rewrite") },
/* D W O */{SST(0x17, 0x09, SS_NOP|SSQ_PRINT_SENSE,
"Recovered data without ECC - data rewritten") },
/* D W O */{SST(0x18, 0x00, SS_NOP|SSQ_PRINT_SENSE,
"Recovered data with error correction applied") },
/* D WR O */{SST(0x18, 0x01, SS_NOP|SSQ_PRINT_SENSE,
"Recovered data with error corr. & retries applied") },
/* D WR O */{SST(0x18, 0x02, SS_NOP|SSQ_PRINT_SENSE,
"Recovered data - data auto-reallocated") },
/* R */{SST(0x18, 0x03, SS_NOP|SSQ_PRINT_SENSE,
"Recovered data with CIRC") },
/* R */{SST(0x18, 0x04, SS_NOP|SSQ_PRINT_SENSE,
"Recovered data with L-EC") },
/* D WR O */{SST(0x18, 0x05, SS_NOP|SSQ_PRINT_SENSE,
"Recovered data - recommend reassignment") },
/* D WR O */{SST(0x18, 0x06, SS_NOP|SSQ_PRINT_SENSE,
"Recovered data - recommend rewrite") },
/* D W O */{SST(0x18, 0x07, SS_NOP|SSQ_PRINT_SENSE,
"Recovered data with ECC - data rewritten") },
/* D O */{SST(0x19, 0x00, SS_RDEF,
"Defect list error") },
/* D O */{SST(0x19, 0x01, SS_RDEF,
"Defect list not available") },
/* D O */{SST(0x19, 0x02, SS_RDEF,
"Defect list error in primary list") },
/* D O */{SST(0x19, 0x03, SS_RDEF,
"Defect list error in grown list") },
/* DTLPWRSOMCAE */{SST(0x1A, 0x00, SS_RDEF,
"Parameter list length error") },
/* DTLPWRSOMCAE */{SST(0x1B, 0x00, SS_RDEF,
"Synchronous data transfer error") },
/* D O */{SST(0x1C, 0x00, SS_RDEF,
"Defect list not found") },
/* D O */{SST(0x1C, 0x01, SS_RDEF,
"Primary defect list not found") },
/* D O */{SST(0x1C, 0x02, SS_RDEF,
"Grown defect list not found") },
/* D W O */{SST(0x1D, 0x00, SS_FATAL,
"Miscompare during verify operation" )},
/* D W O */{SST(0x1E, 0x00, SS_NOP|SSQ_PRINT_SENSE,
"Recovered id with ecc correction") },
/* D O */{SST(0x1F, 0x00, SS_RDEF,
"Partial defect list transfer") },
/* DTLPWRSOMCAE */{SST(0x20, 0x00, SS_FATAL|EINVAL,
"Invalid command operation code") },
/* DT WR OM */{SST(0x21, 0x00, SS_FATAL|EINVAL,
"Logical block address out of range" )},
/* DT WR OM */{SST(0x21, 0x01, SS_FATAL|EINVAL,
"Invalid element address") },
/* D */{SST(0x22, 0x00, SS_FATAL|EINVAL,
"Illegal function") }, /* Deprecated. Use 20 00, 24 00, or 26 00 instead */
/* DTLPWRSOMCAE */{SST(0x24, 0x00, SS_FATAL|EINVAL,
"Invalid field in CDB") },
/* DTLPWRSOMCAE */{SST(0x25, 0x00, SS_FATAL|ENXIO,
"Logical unit not supported") },
/* DTLPWRSOMCAE */{SST(0x26, 0x00, SS_FATAL|EINVAL,
"Invalid field in parameter list") },
/* DTLPWRSOMCAE */{SST(0x26, 0x01, SS_FATAL|EINVAL,
"Parameter not supported") },
/* DTLPWRSOMCAE */{SST(0x26, 0x02, SS_FATAL|EINVAL,
"Parameter value invalid") },
/* DTLPWRSOMCAE */{SST(0x26, 0x03, SS_FATAL|EINVAL,
"Threshold parameters not supported") },
/* DTLPWRSOMCAE */{SST(0x26, 0x04, SS_FATAL|EINVAL,
"Invalid release of active persistent reservation") },
/* DT W O */{SST(0x27, 0x00, SS_FATAL|EACCES,
"Write protected") },
/* DT W O */{SST(0x27, 0x01, SS_FATAL|EACCES,
"Hardware write protected") },
/* DT W O */{SST(0x27, 0x02, SS_FATAL|EACCES,
"Logical unit software write protected") },
/* T */{SST(0x27, 0x03, SS_FATAL|EACCES,
"Associated write protect") },
/* T */{SST(0x27, 0x04, SS_FATAL|EACCES,
"Persistent write protect") },
/* T */{SST(0x27, 0x05, SS_FATAL|EACCES,
"Permanent write protect") },
/* DTLPWRSOMCAE */{SST(0x28, 0x00, SS_RDEF,
"Not ready to ready change, medium may have changed") },
/* DTLPWRSOMCAE */{SST(0x28, 0x01, SS_FATAL|ENXIO,
"Import or export element accessed") },
/*
* XXX JGibbs - All of these should use the same errno, but I don't think
* ENXIO is the correct choice. Should we borrow from the networking
* errnos? ECONNRESET anyone?
*/
/* DTLPWRSOMCAE */{SST(0x29, 0x00, SS_RDEF,
"Power on, reset, or bus device reset occurred") },
/* DTLPWRSOMCAE */{SST(0x29, 0x01, SS_RDEF,
"Power on occurred") },
/* DTLPWRSOMCAE */{SST(0x29, 0x02, SS_RDEF,
"Scsi bus reset occurred") },
/* DTLPWRSOMCAE */{SST(0x29, 0x03, SS_RDEF,
"Bus device reset function occurred") },
/* DTLPWRSOMCAE */{SST(0x29, 0x04, SS_RDEF,
"Device internal reset") },
/* DTLPWRSOMCAE */{SST(0x29, 0x05, SS_RDEF,
"Transceiver mode changed to single-ended") },
/* DTLPWRSOMCAE */{SST(0x29, 0x06, SS_RDEF,
"Transceiver mode changed to LVD") },
/* DTL WRSOMCAE */{SST(0x2A, 0x00, SS_RDEF,
"Parameters changed") },
/* DTL WRSOMCAE */{SST(0x2A, 0x01, SS_RDEF,
"Mode parameters changed") },
/* DTL WRSOMCAE */{SST(0x2A, 0x02, SS_RDEF,
"Log parameters changed") },
/* DTLPWRSOMCAE */{SST(0x2A, 0x03, SS_RDEF,
"Reservations preempted") },
/* DTLPWRSO C */{SST(0x2B, 0x00, SS_RDEF,
"Copy cannot execute since host cannot disconnect") },
/* DTLPWRSOMCAE */{SST(0x2C, 0x00, SS_RDEF,
"Command sequence error") },
/* S */{SST(0x2C, 0x01, SS_RDEF,
"Too many windows specified") },
/* S */{SST(0x2C, 0x02, SS_RDEF,
"Invalid combination of windows specified") },
/* R */{SST(0x2C, 0x03, SS_RDEF,
"Current program area is not empty") },
/* R */{SST(0x2C, 0x04, SS_RDEF,
"Current program area is empty") },
/* T */{SST(0x2D, 0x00, SS_RDEF,
"Overwrite error on update in place") },
/* DTLPWRSOMCAE */{SST(0x2F, 0x00, SS_RDEF,
"Commands cleared by another initiator") },
/* DT WR OM */{SST(0x30, 0x00, SS_RDEF,
"Incompatible medium installed") },
/* DT WR O */{SST(0x30, 0x01, SS_RDEF,
"Cannot read medium - unknown format") },
/* DT WR O */{SST(0x30, 0x02, SS_RDEF,
"Cannot read medium - incompatible format") },
/* DT */{SST(0x30, 0x03, SS_RDEF,
"Cleaning cartridge installed") },
/* DT WR O */{SST(0x30, 0x04, SS_RDEF,
"Cannot write medium - unknown format") },
/* DT WR O */{SST(0x30, 0x05, SS_RDEF,
"Cannot write medium - incompatible format") },
/* DT W O */{SST(0x30, 0x06, SS_RDEF,
"Cannot format medium - incompatible medium") },
/* DTL WRSOM AE */{SST(0x30, 0x07, SS_RDEF,
"Cleaning failure") },
/* R */{SST(0x30, 0x08, SS_RDEF,
"Cannot write - application code mismatch") },
/* R */{SST(0x30, 0x09, SS_RDEF,
"Current session not fixated for append") },
/* DT WR O */{SST(0x31, 0x00, SS_RDEF,
"Medium format corrupted") },
/* D L R O */{SST(0x31, 0x01, SS_RDEF,
"Format command failed") },
/* D W O */{SST(0x32, 0x00, SS_RDEF,
"No defect spare location available") },
/* D W O */{SST(0x32, 0x01, SS_RDEF,
"Defect list update failure") },
/* T */{SST(0x33, 0x00, SS_RDEF,
"Tape length error") },
/* DTLPWRSOMCAE */{SST(0x34, 0x00, SS_RDEF,
"Enclosure failure") },
/* DTLPWRSOMCAE */{SST(0x35, 0x00, SS_RDEF,
"Enclosure services failure") },
/* DTLPWRSOMCAE */{SST(0x35, 0x01, SS_RDEF,
"Unsupported enclosure function") },
/* DTLPWRSOMCAE */{SST(0x35, 0x02, SS_RDEF,
"Enclosure services unavailable") },
/* DTLPWRSOMCAE */{SST(0x35, 0x03, SS_RDEF,
"Enclosure services transfer failure") },
/* DTLPWRSOMCAE */{SST(0x35, 0x04, SS_RDEF,
"Enclosure services transfer refused") },
/* L */{SST(0x36, 0x00, SS_RDEF,
"Ribbon, ink, or toner failure") },
/* DTL WRSOMCAE */{SST(0x37, 0x00, SS_RDEF,
"Rounded parameter") },
/* DTL WRSOMCAE */{SST(0x39, 0x00, SS_RDEF,
"Saving parameters not supported") },
/* DTL WRSOM */{SST(0x3A, 0x00, SS_NOP,
"Medium not present") },
/* DT WR OM */{SST(0x3A, 0x01, SS_NOP,
"Medium not present - tray closed") },
/* DT WR OM */{SST(0x3A, 0x01, SS_NOP,
"Medium not present - tray open") },
/* DT WR OM */{SST(0x3A, 0x03, SS_NOP,
"Medium not present - Loadable") },
/* DT WR OM */{SST(0x3A, 0x04, SS_NOP,
"Medium not present - medium auxiliary "
"memory accessible") },
/* DT WR OM */{SST(0x3A, 0xFF, SS_NOP, NULL) },/* Range 0x05->0xFF */
/* TL */{SST(0x3B, 0x00, SS_RDEF,
"Sequential positioning error") },
/* T */{SST(0x3B, 0x01, SS_RDEF,
"Tape position error at beginning-of-medium") },
/* T */{SST(0x3B, 0x02, SS_RDEF,
"Tape position error at end-of-medium") },
/* L */{SST(0x3B, 0x03, SS_RDEF,
"Tape or electronic vertical forms unit not ready") },
/* L */{SST(0x3B, 0x04, SS_RDEF,
"Slew failure") },
/* L */{SST(0x3B, 0x05, SS_RDEF,
"Paper jam") },
/* L */{SST(0x3B, 0x06, SS_RDEF,
"Failed to sense top-of-form") },
/* L */{SST(0x3B, 0x07, SS_RDEF,
"Failed to sense bottom-of-form") },
/* T */{SST(0x3B, 0x08, SS_RDEF,
"Reposition error") },
/* S */{SST(0x3B, 0x09, SS_RDEF,
"Read past end of medium") },
/* S */{SST(0x3B, 0x0A, SS_RDEF,
"Read past beginning of medium") },
/* S */{SST(0x3B, 0x0B, SS_RDEF,
"Position past end of medium") },
/* T S */{SST(0x3B, 0x0C, SS_RDEF,
"Position past beginning of medium") },
/* DT WR OM */{SST(0x3B, 0x0D, SS_FATAL|ENOSPC,
"Medium destination element full") },
/* DT WR OM */{SST(0x3B, 0x0E, SS_RDEF,
"Medium source element empty") },
/* R */{SST(0x3B, 0x0F, SS_RDEF,
"End of medium reached") },
/* DT WR OM */{SST(0x3B, 0x11, SS_RDEF,
"Medium magazine not accessible") },
/* DT WR OM */{SST(0x3B, 0x12, SS_RDEF,
"Medium magazine removed") },
/* DT WR OM */{SST(0x3B, 0x13, SS_RDEF,
"Medium magazine inserted") },
/* DT WR OM */{SST(0x3B, 0x14, SS_RDEF,
"Medium magazine locked") },
/* DT WR OM */{SST(0x3B, 0x15, SS_RDEF,
"Medium magazine unlocked") },
/* DTLPWRSOMCAE */{SST(0x3D, 0x00, SS_RDEF,
"Invalid bits in identify message") },
/* DTLPWRSOMCAE */{SST(0x3E, 0x00, SS_RDEF,
"Logical unit has not self-configured yet") },
/* DTLPWRSOMCAE */{SST(0x3E, 0x01, SS_RDEF,
"Logical unit failure") },
/* DTLPWRSOMCAE */{SST(0x3E, 0x02, SS_RDEF,
"Timeout on logical unit") },
/* DTLPWRSOMCAE */{SST(0x3F, 0x00, SS_RDEF,
"Target operating conditions have changed") },
/* DTLPWRSOMCAE */{SST(0x3F, 0x01, SS_RDEF,
"Microcode has been changed") },
/* DTLPWRSOMC */{SST(0x3F, 0x02, SS_RDEF,
"Changed operating definition") },
/* DTLPWRSOMCAE */{SST(0x3F, 0x03, SS_INQ_REFRESH|SSQ_DECREMENT_COUNT,
"Inquiry data has changed") },
/* DT WR OMCAE */{SST(0x3F, 0x04, SS_RDEF,
"Component device attached") },
/* DT WR OMCAE */{SST(0x3F, 0x05, SS_RDEF,
"Device identifier changed") },
/* DT WR OMCAE */{SST(0x3F, 0x06, SS_RDEF,
"Redundancy group created or modified") },
/* DT WR OMCAE */{SST(0x3F, 0x07, SS_RDEF,
"Redundancy group deleted") },
/* DT WR OMCAE */{SST(0x3F, 0x08, SS_RDEF,
"Spare created or modified") },
/* DT WR OMCAE */{SST(0x3F, 0x09, SS_RDEF,
"Spare deleted") },
/* DT WR OMCAE */{SST(0x3F, 0x0A, SS_RDEF,
"Volume set created or modified") },
/* DT WR OMCAE */{SST(0x3F, 0x0B, SS_RDEF,
"Volume set deleted") },
/* DT WR OMCAE */{SST(0x3F, 0x0C, SS_RDEF,
"Volume set deassigned") },
/* DT WR OMCAE */{SST(0x3F, 0x0D, SS_RDEF,
"Volume set reassigned") },
/* DTLPWRSOMCAE */{SST(0x3F, 0x0E, SS_RDEF,
"Reported luns data has changed") },
/* DTLPWRSOMCAE */{SST(0x3F, 0x0F, SS_RETRY|SSQ_DECREMENT_COUNT
| SSQ_DELAY_RANDOM|EBUSY,
"Echo buffer overwritten") },
/* DT WR OM B*/{SST(0x3F, 0x0F, SS_RDEF, "Medium Loadable") },
/* DT WR OM B*/{SST(0x3F, 0x0F, SS_RDEF,
"Medium auxiliary memory accessible") },
/* D */{SST(0x40, 0x00, SS_RDEF,
"Ram failure") }, /* deprecated - use 40 NN instead */
/* DTLPWRSOMCAE */{SST(0x40, 0x80, SS_RDEF,
"Diagnostic failure: ASCQ = Component ID") },
/* DTLPWRSOMCAE */{SST(0x40, 0xFF, SS_RDEF|SSQ_RANGE,
NULL) },/* Range 0x80->0xFF */
/* D */{SST(0x41, 0x00, SS_RDEF,
"Data path failure") }, /* deprecated - use 40 NN instead */
/* D */{SST(0x42, 0x00, SS_RDEF,
"Power-on or self-test failure") }, /* deprecated - use 40 NN instead */
/* DTLPWRSOMCAE */{SST(0x43, 0x00, SS_RDEF,
"Message error") },
/* DTLPWRSOMCAE */{SST(0x44, 0x00, SS_RDEF,
"Internal target failure") },
/* DTLPWRSOMCAE */{SST(0x45, 0x00, SS_RDEF,
"Select or reselect failure") },
/* DTLPWRSOMC */{SST(0x46, 0x00, SS_RDEF,
"Unsuccessful soft reset") },
/* DTLPWRSOMCAE */{SST(0x47, 0x00, SS_RDEF|SSQ_FALLBACK,
"SCSI parity error") },
/* DTLPWRSOMCAE */{SST(0x47, 0x01, SS_RDEF|SSQ_FALLBACK,
"Data Phase CRC error detected") },
/* DTLPWRSOMCAE */{SST(0x47, 0x02, SS_RDEF|SSQ_FALLBACK,
"SCSI parity error detected during ST data phase") },
/* DTLPWRSOMCAE */{SST(0x47, 0x03, SS_RDEF|SSQ_FALLBACK,
"Information Unit iuCRC error") },
/* DTLPWRSOMCAE */{SST(0x47, 0x04, SS_RDEF|SSQ_FALLBACK,
"Asynchronous information protection error detected") },
/* DTLPWRSOMCAE */{SST(0x47, 0x05, SS_RDEF|SSQ_FALLBACK,
"Protocol server CRC error") },
/* DTLPWRSOMCAE */{SST(0x48, 0x00, SS_RDEF|SSQ_FALLBACK,
"Initiator detected error message received") },
/* DTLPWRSOMCAE */{SST(0x49, 0x00, SS_RDEF,
"Invalid message error") },
/* DTLPWRSOMCAE */{SST(0x4A, 0x00, SS_RDEF,
"Command phase error") },
/* DTLPWRSOMCAE */{SST(0x4B, 0x00, SS_RDEF,
"Data phase error") },
/* DTLPWRSOMCAE */{SST(0x4C, 0x00, SS_RDEF,
"Logical unit failed self-configuration") },
/* DTLPWRSOMCAE */{SST(0x4D, 0x00, SS_RDEF,
"Tagged overlapped commands: ASCQ = Queue tag ID") },
/* DTLPWRSOMCAE */{SST(0x4D, 0xFF, SS_RDEF|SSQ_RANGE,
NULL)}, /* Range 0x00->0xFF */
/* DTLPWRSOMCAE */{SST(0x4E, 0x00, SS_RDEF,
"Overlapped commands attempted") },
/* T */{SST(0x50, 0x00, SS_RDEF,
"Write append error") },
/* T */{SST(0x50, 0x01, SS_RDEF,
"Write append position error") },
/* T */{SST(0x50, 0x02, SS_RDEF,
"Position error related to timing") },
/* T O */{SST(0x51, 0x00, SS_RDEF,
"Erase failure") },
/* T */{SST(0x52, 0x00, SS_RDEF,
"Cartridge fault") },
/* DTL WRSOM */{SST(0x53, 0x00, SS_RDEF,
"Media load or eject failed") },
/* T */{SST(0x53, 0x01, SS_RDEF,
"Unload tape failure") },
/* DT WR OM */{SST(0x53, 0x02, SS_RDEF,
"Medium removal prevented") },
/* P */{SST(0x54, 0x00, SS_RDEF,
"Scsi to host system interface failure") },
/* P */{SST(0x55, 0x00, SS_RDEF,
"System resource failure") },
/* D O */{SST(0x55, 0x01, SS_FATAL|ENOSPC,
"System buffer full") },
/* R */{SST(0x57, 0x00, SS_RDEF,
"Unable to recover table-of-contents") },
/* O */{SST(0x58, 0x00, SS_RDEF,
"Generation does not exist") },
/* O */{SST(0x59, 0x00, SS_RDEF,
"Updated block read") },
/* DTLPWRSOM */{SST(0x5A, 0x00, SS_RDEF,
"Operator request or state change input") },
/* DT WR OM */{SST(0x5A, 0x01, SS_RDEF,
"Operator medium removal request") },
/* DT W O */{SST(0x5A, 0x02, SS_RDEF,
"Operator selected write protect") },
/* DT W O */{SST(0x5A, 0x03, SS_RDEF,
"Operator selected write permit") },
/* DTLPWRSOM */{SST(0x5B, 0x00, SS_RDEF,
"Log exception") },
/* DTLPWRSOM */{SST(0x5B, 0x01, SS_RDEF,
"Threshold condition met") },
/* DTLPWRSOM */{SST(0x5B, 0x02, SS_RDEF,
"Log counter at maximum") },
/* DTLPWRSOM */{SST(0x5B, 0x03, SS_RDEF,
"Log list codes exhausted") },
/* D O */{SST(0x5C, 0x00, SS_RDEF,
"RPL status change") },
/* D O */{SST(0x5C, 0x01, SS_NOP|SSQ_PRINT_SENSE,
"Spindles synchronized") },
/* D O */{SST(0x5C, 0x02, SS_RDEF,
"Spindles not synchronized") },
/* DTLPWRSOMCAE */{SST(0x5D, 0x00, SS_RDEF,
"Failure prediction threshold exceeded") },
/* DTLPWRSOMCAE */{SST(0x5D, 0xFF, SS_RDEF,
"Failure prediction threshold exceeded (false)") },
/* DTLPWRSO CA */{SST(0x5E, 0x00, SS_RDEF,
"Low power condition on") },
/* DTLPWRSO CA */{SST(0x5E, 0x01, SS_RDEF,
"Idle condition activated by timer") },
/* DTLPWRSO CA */{SST(0x5E, 0x02, SS_RDEF,
"Standby condition activated by timer") },
/* DTLPWRSO CA */{SST(0x5E, 0x03, SS_RDEF,
"Idle condition activated by command") },
/* DTLPWRSO CA */{SST(0x5E, 0x04, SS_RDEF,
"Standby condition activated by command") },
/* S */{SST(0x60, 0x00, SS_RDEF,
"Lamp failure") },
/* S */{SST(0x61, 0x00, SS_RDEF,
"Video acquisition error") },
/* S */{SST(0x61, 0x01, SS_RDEF,
"Unable to acquire video") },
/* S */{SST(0x61, 0x02, SS_RDEF,
"Out of focus") },
/* S */{SST(0x62, 0x00, SS_RDEF,
"Scan head positioning error") },
/* R */{SST(0x63, 0x00, SS_RDEF,
"End of user area encountered on this track") },
/* R */{SST(0x63, 0x01, SS_FATAL|ENOSPC,
"Packet does not fit in available space") },
/* R */{SST(0x64, 0x00, SS_RDEF,
"Illegal mode for this track") },
/* R */{SST(0x64, 0x01, SS_RDEF,
"Invalid packet size") },
/* DTLPWRSOMCAE */{SST(0x65, 0x00, SS_RDEF,
"Voltage fault") },
/* S */{SST(0x66, 0x00, SS_RDEF,
"Automatic document feeder cover up") },
/* S */{SST(0x66, 0x01, SS_RDEF,
"Automatic document feeder lift up") },
/* S */{SST(0x66, 0x02, SS_RDEF,
"Document jam in automatic document feeder") },
/* S */{SST(0x66, 0x03, SS_RDEF,
"Document miss feed automatic in document feeder") },
/* A */{SST(0x67, 0x00, SS_RDEF,
"Configuration failure") },
/* A */{SST(0x67, 0x01, SS_RDEF,
"Configuration of incapable logical units failed") },
/* A */{SST(0x67, 0x02, SS_RDEF,
"Add logical unit failed") },
/* A */{SST(0x67, 0x03, SS_RDEF,
"Modification of logical unit failed") },
/* A */{SST(0x67, 0x04, SS_RDEF,
"Exchange of logical unit failed") },
/* A */{SST(0x67, 0x05, SS_RDEF,
"Remove of logical unit failed") },
/* A */{SST(0x67, 0x06, SS_RDEF,
"Attachment of logical unit failed") },
/* A */{SST(0x67, 0x07, SS_RDEF,
"Creation of logical unit failed") },
/* A */{SST(0x68, 0x00, SS_RDEF,
"Logical unit not configured") },
/* A */{SST(0x69, 0x00, SS_RDEF,
"Data loss on logical unit") },
/* A */{SST(0x69, 0x01, SS_RDEF,
"Multiple logical unit failures") },
/* A */{SST(0x69, 0x02, SS_RDEF,
"Parity/data mismatch") },
/* A */{SST(0x6A, 0x00, SS_RDEF,
"Informational, refer to log") },
/* A */{SST(0x6B, 0x00, SS_RDEF,
"State change has occurred") },
/* A */{SST(0x6B, 0x01, SS_RDEF,
"Redundancy level got better") },
/* A */{SST(0x6B, 0x02, SS_RDEF,
"Redundancy level got worse") },
/* A */{SST(0x6C, 0x00, SS_RDEF,
"Rebuild failure occurred") },
/* A */{SST(0x6D, 0x00, SS_RDEF,
"Recalculate failure occurred") },
/* A */{SST(0x6E, 0x00, SS_RDEF,
"Command to logical unit failed") },
/* T */{SST(0x70, 0x00, SS_RDEF,
"Decompression exception short: ASCQ = Algorithm ID") },
/* T */{SST(0x70, 0xFF, SS_RDEF|SSQ_RANGE,
NULL) }, /* Range 0x00 -> 0xFF */
/* T */{SST(0x71, 0x00, SS_RDEF,
"Decompression exception long: ASCQ = Algorithm ID") },
/* T */{SST(0x71, 0xFF, SS_RDEF|SSQ_RANGE,
NULL) }, /* Range 0x00 -> 0xFF */
/* R */{SST(0x72, 0x00, SS_RDEF,
"Session fixation error") },
/* R */{SST(0x72, 0x01, SS_RDEF,
"Session fixation error writing lead-in") },
/* R */{SST(0x72, 0x02, SS_RDEF,
"Session fixation error writing lead-out") },
/* R */{SST(0x72, 0x03, SS_RDEF,
"Session fixation error - incomplete track in session") },
/* R */{SST(0x72, 0x04, SS_RDEF,
"Empty or partially written reserved track") },
/* R */{SST(0x73, 0x00, SS_RDEF,
"CD control error") },
/* R */{SST(0x73, 0x01, SS_RDEF,
"Power calibration area almost full") },
/* R */{SST(0x73, 0x02, SS_FATAL|ENOSPC,
"Power calibration area is full") },
/* R */{SST(0x73, 0x03, SS_RDEF,
"Power calibration area error") },
/* R */{SST(0x73, 0x04, SS_RDEF,
"Program memory area update failure") },
/* R */{SST(0x73, 0x05, SS_RDEF,
"program memory area is full") }
};
static const int asc_table_size = sizeof(asc_table)/sizeof(asc_table[0]);
struct asc_key
{
int asc;
int ascq;
};
static int
ascentrycomp(const void *key, const void *member)
{
int asc;
int ascq;
const struct asc_table_entry *table_entry;
asc = ((const struct asc_key *)key)->asc;
ascq = ((const struct asc_key *)key)->ascq;
table_entry = (const struct asc_table_entry *)member;
if (asc >= table_entry->asc) {
if (asc > table_entry->asc)
return (1);
if (ascq <= table_entry->ascq) {
/* Check for ranges */
if (ascq == table_entry->ascq
|| ((table_entry->action & SSQ_RANGE) != 0
&& ascq >= (table_entry - 1)->ascq))
return (0);
return (-1);
}
return (1);
}
return (-1);
}
static int
senseentrycomp(const void *key, const void *member)
{
int sense_key;
const struct sense_key_table_entry *table_entry;
sense_key = *((const int *)key);
table_entry = (const struct sense_key_table_entry *)member;
if (sense_key >= table_entry->sense_key) {
if (sense_key == table_entry->sense_key)
return (0);
return (1);
}
return (-1);
}
static void
fetchtableentries(int sense_key, int asc, int ascq,
struct scsi_inquiry_data *inq_data,
const struct sense_key_table_entry **sense_entry,
const struct asc_table_entry **asc_entry)
{
void *match;
const struct asc_table_entry *asc_tables[2];
const struct sense_key_table_entry *sense_tables[2];
struct asc_key asc_ascq;
size_t asc_tables_size[2];
size_t sense_tables_size[2];
int num_asc_tables;
int num_sense_tables;
int i;
/* Default to failure */
*sense_entry = NULL;
*asc_entry = NULL;
match = NULL;
if (inq_data != NULL)
match = cam_quirkmatch((void *)inq_data,
(void *)sense_quirk_table,
sense_quirk_table_size,
sizeof(*sense_quirk_table),
aic_inquiry_match);
if (match != NULL) {
struct scsi_sense_quirk_entry *quirk;
quirk = (struct scsi_sense_quirk_entry *)match;
asc_tables[0] = quirk->asc_info;
asc_tables_size[0] = quirk->num_ascs;
asc_tables[1] = asc_table;
asc_tables_size[1] = asc_table_size;
num_asc_tables = 2;
sense_tables[0] = quirk->sense_key_info;
sense_tables_size[0] = quirk->num_sense_keys;
sense_tables[1] = sense_key_table;
sense_tables_size[1] = sense_key_table_size;
num_sense_tables = 2;
} else {
asc_tables[0] = asc_table;
asc_tables_size[0] = asc_table_size;
num_asc_tables = 1;
sense_tables[0] = sense_key_table;
sense_tables_size[0] = sense_key_table_size;
num_sense_tables = 1;
}
asc_ascq.asc = asc;
asc_ascq.ascq = ascq;
for (i = 0; i < num_asc_tables; i++) {
void *found_entry;
found_entry = scsibsearch(&asc_ascq, asc_tables[i],
asc_tables_size[i],
sizeof(**asc_tables),
ascentrycomp);
if (found_entry) {
*asc_entry = (struct asc_table_entry *)found_entry;
break;
}
}
for (i = 0; i < num_sense_tables; i++) {
void *found_entry;
found_entry = scsibsearch(&sense_key, sense_tables[i],
sense_tables_size[i],
sizeof(**sense_tables),
senseentrycomp);
if (found_entry) {
*sense_entry =
(struct sense_key_table_entry *)found_entry;
break;
}
}
}
static void *
scsibsearch(const void *key, const void *base, size_t nmemb, size_t size,
int (*compar)(const void *, const void *))
{
const void *entry;
u_int l;
u_int u;
u_int m;
l = -1;
u = nmemb;
while (l + 1 != u) {
m = (l + u) / 2;
entry = base + m * size;
if (compar(key, entry) > 0)
l = m;
else
u = m;
}
entry = base + u * size;
if (u == nmemb
|| compar(key, entry) != 0)
return (NULL);
return ((void *)entry);
}
/*
* Compare string with pattern, returning 0 on match.
* Short pattern matches trailing blanks in name,
* wildcard '*' in pattern matches rest of name,
* wildcard '?' matches a single non-space character.
*/
static int
cam_strmatch(const uint8_t *str, const uint8_t *pattern, int str_len)
{
while (*pattern != '\0'&& str_len > 0) {
if (*pattern == '*') {
return (0);
}
if ((*pattern != *str)
&& (*pattern != '?' || *str == ' ')) {
return (1);
}
pattern++;
str++;
str_len--;
}
while (str_len > 0 && *str++ == ' ')
str_len--;
return (str_len);
}
static caddr_t
cam_quirkmatch(caddr_t target, caddr_t quirk_table, int num_entries,
int entry_size, cam_quirkmatch_t *comp_func)
{
for (; num_entries > 0; num_entries--, quirk_table += entry_size) {
if ((*comp_func)(target, quirk_table) == 0)
return (quirk_table);
}
return (NULL);
}
void
aic_sense_desc(int sense_key, int asc, int ascq,
struct scsi_inquiry_data *inq_data,
const char **sense_key_desc, const char **asc_desc)
{
const struct asc_table_entry *asc_entry;
const struct sense_key_table_entry *sense_entry;
fetchtableentries(sense_key, asc, ascq,
inq_data,
&sense_entry,
&asc_entry);
*sense_key_desc = sense_entry->desc;
if (asc_entry != NULL)
*asc_desc = asc_entry->desc;
else if (asc >= 0x80 && asc <= 0xff)
*asc_desc = "Vendor Specific ASC";
else if (ascq >= 0x80 && ascq <= 0xff)
*asc_desc = "Vendor Specific ASCQ";
else
*asc_desc = "Reserved ASC/ASCQ pair";
}
/*
* Given sense and device type information, return the appropriate action.
* If we do not understand the specific error as identified by the ASC/ASCQ
* pair, fall back on the more generic actions derived from the sense key.
*/
aic_sense_action
aic_sense_error_action(struct scsi_sense_data *sense_data,
struct scsi_inquiry_data *inq_data, uint32_t sense_flags)
{
const struct asc_table_entry *asc_entry;
const struct sense_key_table_entry *sense_entry;
int error_code, sense_key, asc, ascq;
aic_sense_action action;
scsi_extract_sense(sense_data, &error_code, &sense_key, &asc, &ascq);
if (error_code == SSD_DEFERRED_ERROR) {
/*
* XXX dufault@FreeBSD.org
* This error doesn't relate to the command associated
* with this request sense. A deferred error is an error
* for a command that has already returned GOOD status
* (see SCSI2 8.2.14.2).
*
* By my reading of that section, it looks like the current
* command has been cancelled, we should now clean things up
* (hopefully recovering any lost data) and then retry the
* current command. There are two easy choices, both wrong:
*
* 1. Drop through (like we had been doing), thus treating
* this as if the error were for the current command and
* return and stop the current command.
*
* 2. Issue a retry (like I made it do) thus hopefully
* recovering the current transfer, and ignoring the
* fact that we've dropped a command.
*
* These should probably be handled in a device specific
* sense handler or punted back up to a user mode daemon
*/
action = SS_RETRY|SSQ_DECREMENT_COUNT|SSQ_PRINT_SENSE;
} else {
fetchtableentries(sense_key, asc, ascq,
inq_data,
&sense_entry,
&asc_entry);
/*
* Override the 'No additional Sense' entry (0,0)
* with the error action of the sense key.
*/
if (asc_entry != NULL
&& (asc != 0 || ascq != 0))
action = asc_entry->action;
else
action = sense_entry->action;
if (sense_key == SSD_KEY_RECOVERED_ERROR) {
/*
* The action succeeded but the device wants
* the user to know that some recovery action
* was required.
*/
action &= ~(SS_MASK|SSQ_MASK|SS_ERRMASK);
action |= SS_NOP|SSQ_PRINT_SENSE;
} else if (sense_key == SSD_KEY_ILLEGAL_REQUEST) {
if ((sense_flags & SF_QUIET_IR) != 0)
action &= ~SSQ_PRINT_SENSE;
} else if (sense_key == SSD_KEY_UNIT_ATTENTION) {
if ((sense_flags & SF_RETRY_UA) != 0
&& (action & SS_MASK) == SS_FAIL) {
action &= ~(SS_MASK|SSQ_MASK);
action |= SS_RETRY|SSQ_DECREMENT_COUNT|
SSQ_PRINT_SENSE;
}
}
}
if ((sense_flags & SF_PRINT_ALWAYS) != 0)
action |= SSQ_PRINT_SENSE;
else if ((sense_flags & SF_NO_PRINT) != 0)
action &= ~SSQ_PRINT_SENSE;
return (action);
}
/*
* Try make as good a match as possible with
* available sub drivers
*/
int
aic_inquiry_match(caddr_t inqbuffer, caddr_t table_entry)
{
struct scsi_inquiry_pattern *entry;
struct scsi_inquiry_data *inq;
entry = (struct scsi_inquiry_pattern *)table_entry;
inq = (struct scsi_inquiry_data *)inqbuffer;
if (((SID_TYPE(inq) == entry->type)
|| (entry->type == T_ANY))
&& (SID_IS_REMOVABLE(inq) ? entry->media_type & SIP_MEDIA_REMOVABLE
: entry->media_type & SIP_MEDIA_FIXED)
&& (cam_strmatch(inq->vendor, entry->vendor, sizeof(inq->vendor)) == 0)
&& (cam_strmatch(inq->product, entry->product,
sizeof(inq->product)) == 0)
&& (cam_strmatch(inq->revision, entry->revision,
sizeof(inq->revision)) == 0)) {
return (0);
}
return (-1);
}
/*
* Table of syncrates that don't follow the "divisible by 4"
* rule. This table will be expanded in future SCSI specs.
*/
static struct {
u_int period_factor;
u_int period; /* in 100ths of ns */
} scsi_syncrates[] = {
{ 0x08, 625 }, /* FAST-160 */
{ 0x09, 1250 }, /* FAST-80 */
{ 0x0a, 2500 }, /* FAST-40 40MHz */
{ 0x0b, 3030 }, /* FAST-40 33MHz */
{ 0x0c, 5000 } /* FAST-20 */
};
/*
* Return the frequency in kHz corresponding to the given
* sync period factor.
*/
u_int
aic_calc_syncsrate(u_int period_factor)
{
int i;
int num_syncrates;
num_syncrates = sizeof(scsi_syncrates) / sizeof(scsi_syncrates[0]);
/* See if the period is in the "exception" table */
for (i = 0; i < num_syncrates; i++) {
if (period_factor == scsi_syncrates[i].period_factor) {
/* Period in kHz */
return (100000000 / scsi_syncrates[i].period);
}
}
/*
* Wasn't in the table, so use the standard
* 4 times conversion.
*/
return (10000000 / (period_factor * 4 * 10));
}
/*
* Return speed in KB/s.
*/
u_int
aic_calc_speed(u_int width, u_int period, u_int offset, u_int min_rate)
{
u_int freq;
if (offset != 0 && period < min_rate)
freq = aic_calc_syncsrate(period);
else
/* Roughly 3.3MB/s for async */
freq = 3300;
freq <<= width;
return (freq);
}
uint32_t
aic_error_action(struct scsi_cmnd *cmd, struct scsi_inquiry_data *inq_data,
cam_status status, u_int scsi_status)
{
aic_sense_action err_action;
int sense;
sense = (cmd->result >> 24) == DRIVER_SENSE;
switch (status) {
case CAM_REQ_CMP:
err_action = SS_NOP;
break;
case CAM_AUTOSENSE_FAIL:
case CAM_SCSI_STATUS_ERROR:
switch (scsi_status) {
case SCSI_STATUS_OK:
case SCSI_STATUS_COND_MET:
case SCSI_STATUS_INTERMED:
case SCSI_STATUS_INTERMED_COND_MET:
err_action = SS_NOP;
break;
case SCSI_STATUS_CMD_TERMINATED:
case SCSI_STATUS_CHECK_COND:
if (sense != 0) {
struct scsi_sense_data *sense;
sense = (struct scsi_sense_data *)
&cmd->sense_buffer;
err_action =
aic_sense_error_action(sense, inq_data, 0);
} else {
err_action = SS_RETRY|SSQ_FALLBACK
| SSQ_DECREMENT_COUNT|EIO;
}
break;
case SCSI_STATUS_QUEUE_FULL:
case SCSI_STATUS_BUSY:
err_action = SS_RETRY|SSQ_DELAY|SSQ_MANY
| SSQ_DECREMENT_COUNT|EBUSY;
break;
case SCSI_STATUS_RESERV_CONFLICT:
default:
err_action = SS_FAIL|EBUSY;
break;
}
break;
case CAM_CMD_TIMEOUT:
case CAM_REQ_CMP_ERR:
case CAM_UNEXP_BUSFREE:
case CAM_UNCOR_PARITY:
case CAM_DATA_RUN_ERR:
err_action = SS_RETRY|SSQ_FALLBACK|EIO;
break;
case CAM_UA_ABORT:
case CAM_UA_TERMIO:
case CAM_MSG_REJECT_REC:
case CAM_SEL_TIMEOUT:
err_action = SS_FAIL|EIO;
break;
case CAM_REQ_INVALID:
case CAM_PATH_INVALID:
case CAM_DEV_NOT_THERE:
case CAM_NO_HBA:
case CAM_PROVIDE_FAIL:
case CAM_REQ_TOO_BIG:
case CAM_RESRC_UNAVAIL:
case CAM_BUSY:
default:
/* panic?? These should never occur in our application. */
err_action = SS_FAIL|EIO;
break;
case CAM_SCSI_BUS_RESET:
case CAM_BDR_SENT:
case CAM_REQUEUE_REQ:
/* Unconditional requeue */
err_action = SS_RETRY;
break;
}
return (err_action);
}
char *
aic_parse_brace_option(char *opt_name, char *opt_arg, char *end, int depth,
aic_option_callback_t *callback, u_long callback_arg)
{
char *tok_end;
char *tok_end2;
int i;
int instance;
int targ;
int done;
char tok_list[] = {'.', ',', '{', '}', '\0'};
/* All options use a ':' name/arg separator */
if (*opt_arg != ':')
return (opt_arg);
opt_arg++;
instance = -1;
targ = -1;
done = FALSE;
/*
* Restore separator that may be in
* the middle of our option argument.
*/
tok_end = strchr(opt_arg, '\0');
if (tok_end < end)
*tok_end = ',';
while (!done) {
switch (*opt_arg) {
case '{':
if (instance == -1) {
instance = 0;
} else {
if (depth > 1) {
if (targ == -1)
targ = 0;
} else {
printf("Malformed Option %s\n",
opt_name);
done = TRUE;
}
}
opt_arg++;
break;
case '}':
if (targ != -1)
targ = -1;
else if (instance != -1)
instance = -1;
opt_arg++;
break;
case ',':
case '.':
if (instance == -1)
done = TRUE;
else if (targ >= 0)
targ++;
else if (instance >= 0)
instance++;
opt_arg++;
break;
case '\0':
done = TRUE;
break;
default:
tok_end = end;
for (i = 0; tok_list[i]; i++) {
tok_end2 = strchr(opt_arg, tok_list[i]);
if ((tok_end2) && (tok_end2 < tok_end))
tok_end = tok_end2;
}
callback(callback_arg, instance, targ,
simple_strtol(opt_arg, NULL, 0));
opt_arg = tok_end;
break;
}
}
return (opt_arg);
}