|  | /* | 
|  | *  STV0680 USB Camera Driver, by Kevin Sisson (kjsisson@bellsouth.net) | 
|  | * | 
|  | * Thanks to STMicroelectronics for information on the usb commands, and | 
|  | * to Steve Miller at STM for his help and encouragement while I was | 
|  | * writing this driver. | 
|  | * | 
|  | * This driver is based heavily on the | 
|  | * Endpoints (formerly known as AOX) se401 USB Camera Driver | 
|  | * Copyright (c) 2000 Jeroen B. Vreeken (pe1rxq@amsat.org) | 
|  | * | 
|  | * Still somewhat based on the Linux ov511 driver. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify it | 
|  | * under the terms of the GNU General Public License as published by the | 
|  | * Free Software Foundation; either version 2 of the License, or (at your | 
|  | * option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but | 
|  | * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY | 
|  | * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License | 
|  | * for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software Foundation, | 
|  | * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
|  | * | 
|  | * History: | 
|  | * ver 0.1 October, 2001. Initial attempt. | 
|  | * | 
|  | * ver 0.2 November, 2001. Fixed asbility to resize, added brightness | 
|  | *                         function, made more stable (?) | 
|  | * | 
|  | * ver 0.21 Nov, 2001.     Added gamma correction and white balance, | 
|  | *                         due to Alexander Schwartz. Still trying to | 
|  | *                         improve stablility. Moved stuff into stv680.h | 
|  | * | 
|  | * ver 0.22 Nov, 2001.	   Added sharpen function (by Michael Sweet, | 
|  | *                         mike@easysw.com) from GIMP, also used in pencam. | 
|  | *                         Simple, fast, good integer math routine. | 
|  | * | 
|  | * ver 0.23 Dec, 2001 (gkh) | 
|  | * 			   Took out sharpen function, ran code through | 
|  | * 			   Lindent, and did other minor tweaks to get | 
|  | * 			   things to work properly with 2.5.1 | 
|  | * | 
|  | * ver 0.24 Jan, 2002 (kjs) | 
|  | *                         Fixed the problem with webcam crashing after | 
|  | *                         two pictures. Changed the way pic is halved to | 
|  | *                         improve quality. Got rid of green line around | 
|  | *                         frame. Fix brightness reset when changing size | 
|  | *                         bug. Adjusted gamma filters slightly. | 
|  | * | 
|  | * ver 0.25 Jan, 2002 (kjs) | 
|  | *			   Fixed a bug in which the driver sometimes attempted | 
|  | *			   to set to a non-supported size. This allowed | 
|  | *			   gnomemeeting to work. | 
|  | *			   Fixed proc entry removal bug. | 
|  | */ | 
|  |  | 
|  | #include <linux/config.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/vmalloc.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/pagemap.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/videodev.h> | 
|  | #include <linux/usb.h> | 
|  |  | 
|  | #include "stv680.h" | 
|  |  | 
|  | static int video_nr = -1; | 
|  | static int swapRGB = 0;   /* default for auto sleect */ | 
|  | static int swapRGB_on = 0; /* default to allow auto select; -1=swap never, +1= swap always */ | 
|  |  | 
|  | static unsigned int debug = 0; | 
|  |  | 
|  | #define PDEBUG(level, fmt, args...) \ | 
|  | do { \ | 
|  | if (debug >= level)	\ | 
|  | info("[%s:%d] " fmt, __FUNCTION__, __LINE__ , ## args);	\ | 
|  | } while (0) | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Version Information | 
|  | */ | 
|  | #define DRIVER_VERSION "v0.25" | 
|  | #define DRIVER_AUTHOR "Kevin Sisson <kjsisson@bellsouth.net>" | 
|  | #define DRIVER_DESC "STV0680 USB Camera Driver" | 
|  |  | 
|  | MODULE_AUTHOR (DRIVER_AUTHOR); | 
|  | MODULE_DESCRIPTION (DRIVER_DESC); | 
|  | MODULE_LICENSE ("GPL"); | 
|  | module_param(debug, int, S_IRUGO | S_IWUSR); | 
|  | MODULE_PARM_DESC (debug, "Debug enabled or not"); | 
|  | module_param(swapRGB_on, int, 0); | 
|  | MODULE_PARM_DESC (swapRGB_on, "Red/blue swap: 1=always, 0=auto, -1=never"); | 
|  | module_param(video_nr, int, 0); | 
|  |  | 
|  | /******************************************************************** | 
|  | * | 
|  | * Memory management | 
|  | * | 
|  | * This is a shameless copy from the USB-cpia driver (linux kernel | 
|  | * version 2.3.29 or so, I have no idea what this code actually does ;). | 
|  | * Actually it seems to be a copy of a shameless copy of the bttv-driver. | 
|  | * Or that is a copy of a shameless copy of ... (To the powers: is there | 
|  | * no generic kernel-function to do this sort of stuff?) | 
|  | * | 
|  | * Yes, it was a shameless copy from the bttv-driver. IIRC, Alan says | 
|  | * there will be one, but apparentely not yet -jerdfelt | 
|  | * | 
|  | * So I copied it again for the ov511 driver -claudio | 
|  | * | 
|  | * Same for the se401 driver -Jeroen | 
|  | * | 
|  | * And the STV0680 driver - Kevin | 
|  | ********************************************************************/ | 
|  | static void *rvmalloc (unsigned long size) | 
|  | { | 
|  | void *mem; | 
|  | unsigned long adr; | 
|  |  | 
|  | size = PAGE_ALIGN(size); | 
|  | mem = vmalloc_32 (size); | 
|  | if (!mem) | 
|  | return NULL; | 
|  |  | 
|  | memset (mem, 0, size);	/* Clear the ram out, no junk to the user */ | 
|  | adr = (unsigned long) mem; | 
|  | while (size > 0) { | 
|  | SetPageReserved(vmalloc_to_page((void *)adr)); | 
|  | adr += PAGE_SIZE; | 
|  | size -= PAGE_SIZE; | 
|  | } | 
|  | return mem; | 
|  | } | 
|  |  | 
|  | static void rvfree (void *mem, unsigned long size) | 
|  | { | 
|  | unsigned long adr; | 
|  |  | 
|  | if (!mem) | 
|  | return; | 
|  |  | 
|  | adr = (unsigned long) mem; | 
|  | while ((long) size > 0) { | 
|  | ClearPageReserved(vmalloc_to_page((void *)adr)); | 
|  | adr += PAGE_SIZE; | 
|  | size -= PAGE_SIZE; | 
|  | } | 
|  | vfree (mem); | 
|  | } | 
|  |  | 
|  |  | 
|  | /********************************************************************* | 
|  | * pencam read/write functions | 
|  | ********************************************************************/ | 
|  |  | 
|  | static int stv_sndctrl (int set, struct usb_stv *stv680, unsigned short req, unsigned short value, unsigned char *buffer, int size) | 
|  | { | 
|  | int ret = -1; | 
|  |  | 
|  | switch (set) { | 
|  | case 0:		/*  0xc1  */ | 
|  | ret = usb_control_msg (stv680->udev, | 
|  | usb_rcvctrlpipe (stv680->udev, 0), | 
|  | req, | 
|  | (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT), | 
|  | value, 0, buffer, size, PENCAM_TIMEOUT); | 
|  | break; | 
|  |  | 
|  | case 1:		/*  0x41  */ | 
|  | ret = usb_control_msg (stv680->udev, | 
|  | usb_sndctrlpipe (stv680->udev, 0), | 
|  | req, | 
|  | (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT), | 
|  | value, 0, buffer, size, PENCAM_TIMEOUT); | 
|  | break; | 
|  |  | 
|  | case 2:		/*  0x80  */ | 
|  | ret = usb_control_msg (stv680->udev, | 
|  | usb_rcvctrlpipe (stv680->udev, 0), | 
|  | req, | 
|  | (USB_DIR_IN | USB_RECIP_DEVICE), | 
|  | value, 0, buffer, size, PENCAM_TIMEOUT); | 
|  | break; | 
|  |  | 
|  | case 3:		/*  0x40  */ | 
|  | ret = usb_control_msg (stv680->udev, | 
|  | usb_sndctrlpipe (stv680->udev, 0), | 
|  | req, | 
|  | (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE), | 
|  | value, 0, buffer, size, PENCAM_TIMEOUT); | 
|  | break; | 
|  |  | 
|  | } | 
|  | if ((ret < 0) && (req != 0x0a)) { | 
|  | PDEBUG (1, "STV(e): usb_control_msg error %i, request = 0x%x, error = %i", set, req, ret); | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int stv_set_config (struct usb_stv *dev, int configuration, int interface, int alternate) | 
|  | { | 
|  |  | 
|  | if (configuration != dev->udev->actconfig->desc.bConfigurationValue | 
|  | || usb_reset_configuration (dev->udev) < 0) { | 
|  | PDEBUG (1, "STV(e): FAILED to reset configuration %i", configuration); | 
|  | return -1; | 
|  | } | 
|  | if (usb_set_interface (dev->udev, interface, alternate) < 0) { | 
|  | PDEBUG (1, "STV(e): FAILED to set alternate interface %i", alternate); | 
|  | return -1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int stv_stop_video (struct usb_stv *dev) | 
|  | { | 
|  | int i; | 
|  | unsigned char *buf; | 
|  |  | 
|  | buf = kmalloc (40, GFP_KERNEL); | 
|  | if (buf == NULL) { | 
|  | PDEBUG (0, "STV(e): Out of (small buf) memory"); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | /* this is a high priority command; it stops all lower order commands */ | 
|  | if ((i = stv_sndctrl (1, dev, 0x04, 0x0000, buf, 0x0)) < 0) { | 
|  | i = stv_sndctrl (0, dev, 0x80, 0, buf, 0x02);	/* Get Last Error; 2 = busy */ | 
|  | PDEBUG (1, "STV(i): last error: %i,  command = 0x%x", buf[0], buf[1]); | 
|  | } else { | 
|  | PDEBUG (1, "STV(i): Camera reset to idle mode."); | 
|  | } | 
|  |  | 
|  | if ((i = stv_set_config (dev, 1, 0, 0)) < 0) | 
|  | PDEBUG (1, "STV(e): Reset config during exit failed"); | 
|  |  | 
|  | /*  get current mode  */ | 
|  | buf[0] = 0xf0; | 
|  | if ((i = stv_sndctrl (0, dev, 0x87, 0, buf, 0x08)) != 0x08)	/* get mode */ | 
|  | PDEBUG (0, "STV(e): Stop_video: problem setting original mode"); | 
|  | if (dev->origMode != buf[0]) { | 
|  | memset (buf, 0, 8); | 
|  | buf[0] = (unsigned char) dev->origMode; | 
|  | if ((i = stv_sndctrl (3, dev, 0x07, 0x0100, buf, 0x08)) != 0x08) { | 
|  | PDEBUG (0, "STV(e): Stop_video: Set_Camera_Mode failed"); | 
|  | i = -1; | 
|  | } | 
|  | buf[0] = 0xf0; | 
|  | i = stv_sndctrl (0, dev, 0x87, 0, buf, 0x08); | 
|  | if ((i != 0x08) || (buf[0] != dev->origMode)) { | 
|  | PDEBUG (0, "STV(e): camera NOT set to original resolution."); | 
|  | i = -1; | 
|  | } else | 
|  | PDEBUG (0, "STV(i): Camera set to original resolution"); | 
|  | } | 
|  | /* origMode */ | 
|  | kfree (buf); | 
|  | return i; | 
|  | } | 
|  |  | 
|  | static int stv_set_video_mode (struct usb_stv *dev) | 
|  | { | 
|  | int i, stop_video = 1; | 
|  | unsigned char *buf; | 
|  |  | 
|  | buf = kmalloc (40, GFP_KERNEL); | 
|  | if (buf == NULL) { | 
|  | PDEBUG (0, "STV(e): Out of (small buf) memory"); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | if ((i = stv_set_config (dev, 1, 0, 0)) < 0) { | 
|  | kfree (buf); | 
|  | return i; | 
|  | } | 
|  |  | 
|  | i = stv_sndctrl (2, dev, 0x06, 0x0100, buf, 0x12); | 
|  | if (!(i > 0) && (buf[8] == 0x53) && (buf[9] == 0x05)) { | 
|  | PDEBUG (1, "STV(e): Could not get descriptor 0100."); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | /*  set alternate interface 1 */ | 
|  | if ((i = stv_set_config (dev, 1, 0, 1)) < 0) | 
|  | goto error; | 
|  |  | 
|  | if ((i = stv_sndctrl (0, dev, 0x85, 0, buf, 0x10)) != 0x10) | 
|  | goto error; | 
|  | PDEBUG (1, "STV(i): Setting video mode."); | 
|  | /*  Switch to Video mode: 0x0100 = VGA (640x480), 0x0000 = CIF (352x288) 0x0300 = QVGA (320x240)  */ | 
|  | if ((i = stv_sndctrl (1, dev, 0x09, dev->VideoMode, buf, 0x0)) < 0) { | 
|  | stop_video = 0; | 
|  | goto error; | 
|  | } | 
|  | goto exit; | 
|  |  | 
|  | error: | 
|  | kfree (buf); | 
|  | if (stop_video == 1) | 
|  | stv_stop_video (dev); | 
|  | return -1; | 
|  |  | 
|  | exit: | 
|  | kfree (buf); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int stv_init (struct usb_stv *stv680) | 
|  | { | 
|  | int i = 0; | 
|  | unsigned char *buffer; | 
|  | unsigned long int bufsize; | 
|  |  | 
|  | buffer = kmalloc (40, GFP_KERNEL); | 
|  | if (buffer == NULL) { | 
|  | PDEBUG (0, "STV(e): Out of (small buf) memory"); | 
|  | return -1; | 
|  | } | 
|  | memset (buffer, 0, 40); | 
|  | udelay (100); | 
|  |  | 
|  | /* set config 1, interface 0, alternate 0 */ | 
|  | if ((i = stv_set_config (stv680, 1, 0, 0)) < 0) { | 
|  | kfree (buffer); | 
|  | PDEBUG (0, "STV(e): set config 1,0,0 failed"); | 
|  | return -1; | 
|  | } | 
|  | /* ping camera to be sure STV0680 is present */ | 
|  | if ((i = stv_sndctrl (0, stv680, 0x88, 0x5678, buffer, 0x02)) != 0x02) | 
|  | goto error; | 
|  | if ((buffer[0] != 0x56) || (buffer[1] != 0x78)) { | 
|  | PDEBUG (1, "STV(e): camera ping failed!!"); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | /* get camera descriptor */ | 
|  | if ((i = stv_sndctrl (2, stv680, 0x06, 0x0200, buffer, 0x09)) != 0x09) | 
|  | goto error; | 
|  | i = stv_sndctrl (2, stv680, 0x06, 0x0200, buffer, 0x22); | 
|  | if (!(i >= 0) && (buffer[7] == 0xa0) && (buffer[8] == 0x23)) { | 
|  | PDEBUG (1, "STV(e): Could not get descriptor 0200."); | 
|  | goto error; | 
|  | } | 
|  | if ((i = stv_sndctrl (0, stv680, 0x8a, 0, buffer, 0x02)) != 0x02) | 
|  | goto error; | 
|  | if ((i = stv_sndctrl (0, stv680, 0x8b, 0, buffer, 0x24)) != 0x24) | 
|  | goto error; | 
|  | if ((i = stv_sndctrl (0, stv680, 0x85, 0, buffer, 0x10)) != 0x10) | 
|  | goto error; | 
|  |  | 
|  | stv680->SupportedModes = buffer[7]; | 
|  | i = stv680->SupportedModes; | 
|  | stv680->CIF = 0; | 
|  | stv680->VGA = 0; | 
|  | stv680->QVGA = 0; | 
|  | if (i & 1) | 
|  | stv680->CIF = 1; | 
|  | if (i & 2) | 
|  | stv680->VGA = 1; | 
|  | if (i & 8) | 
|  | stv680->QVGA = 1; | 
|  | if (stv680->SupportedModes == 0) { | 
|  | PDEBUG (0, "STV(e): There are NO supported STV680 modes!!"); | 
|  | i = -1; | 
|  | goto error; | 
|  | } else { | 
|  | if (stv680->CIF) | 
|  | PDEBUG (0, "STV(i): CIF is supported"); | 
|  | if (stv680->QVGA) | 
|  | PDEBUG (0, "STV(i): QVGA is supported"); | 
|  | } | 
|  | /* FW rev, ASIC rev, sensor ID  */ | 
|  | PDEBUG (1, "STV(i): Firmware rev is %i.%i", buffer[0], buffer[1]); | 
|  | PDEBUG (1, "STV(i): ASIC rev is %i.%i", buffer[2], buffer[3]); | 
|  | PDEBUG (1, "STV(i): Sensor ID is %i", (buffer[4]*16) + (buffer[5]>>4)); | 
|  |  | 
|  | /*  set alternate interface 1 */ | 
|  | if ((i = stv_set_config (stv680, 1, 0, 1)) < 0) | 
|  | goto error; | 
|  |  | 
|  | if ((i = stv_sndctrl (0, stv680, 0x85, 0, buffer, 0x10)) != 0x10) | 
|  | goto error; | 
|  | if ((i = stv_sndctrl (0, stv680, 0x8d, 0, buffer, 0x08)) != 0x08) | 
|  | goto error; | 
|  | i = buffer[3]; | 
|  | PDEBUG (0, "STV(i): Camera has %i pictures.", i); | 
|  |  | 
|  | /*  get current mode */ | 
|  | if ((i = stv_sndctrl (0, stv680, 0x87, 0, buffer, 0x08)) != 0x08) | 
|  | goto error; | 
|  | stv680->origMode = buffer[0];	/* 01 = VGA, 03 = QVGA, 00 = CIF */ | 
|  |  | 
|  | /* This will attemp CIF mode, if supported. If not, set to QVGA  */ | 
|  | memset (buffer, 0, 8); | 
|  | if (stv680->CIF) | 
|  | buffer[0] = 0x00; | 
|  | else if (stv680->QVGA) | 
|  | buffer[0] = 0x03; | 
|  | if ((i = stv_sndctrl (3, stv680, 0x07, 0x0100, buffer, 0x08)) != 0x08) { | 
|  | PDEBUG (0, "STV(i): Set_Camera_Mode failed"); | 
|  | i = -1; | 
|  | goto error; | 
|  | } | 
|  | buffer[0] = 0xf0; | 
|  | stv_sndctrl (0, stv680, 0x87, 0, buffer, 0x08); | 
|  | if (((stv680->CIF == 1) && (buffer[0] != 0x00)) || ((stv680->QVGA == 1) && (buffer[0] != 0x03))) { | 
|  | PDEBUG (0, "STV(e): Error setting camera video mode!"); | 
|  | i = -1; | 
|  | goto error; | 
|  | } else { | 
|  | if (buffer[0] == 0) { | 
|  | stv680->VideoMode = 0x0000; | 
|  | PDEBUG (0, "STV(i): Video Mode set to CIF"); | 
|  | } | 
|  | if (buffer[0] == 0x03) { | 
|  | stv680->VideoMode = 0x0300; | 
|  | PDEBUG (0, "STV(i): Video Mode set to QVGA"); | 
|  | } | 
|  | } | 
|  | if ((i = stv_sndctrl (0, stv680, 0x8f, 0, buffer, 0x10)) != 0x10) | 
|  | goto error; | 
|  | bufsize = (buffer[0] << 24) | (buffer[1] << 16) | (buffer[2] << 8) | (buffer[3]); | 
|  | stv680->cwidth = (buffer[4] << 8) | (buffer[5]);	/* ->camera = 322, 356, 644  */ | 
|  | stv680->cheight = (buffer[6] << 8) | (buffer[7]);	/* ->camera = 242, 292, 484  */ | 
|  | stv680->origGain = buffer[12]; | 
|  |  | 
|  | goto exit; | 
|  |  | 
|  | error: | 
|  | i = stv_sndctrl (0, stv680, 0x80, 0, buffer, 0x02);	/* Get Last Error */ | 
|  | PDEBUG (1, "STV(i): last error: %i,  command = 0x%x", buffer[0], buffer[1]); | 
|  | kfree (buffer); | 
|  | return -1; | 
|  |  | 
|  | exit: | 
|  | kfree (buffer); | 
|  |  | 
|  | /* video = 320x240, 352x288 */ | 
|  | if (stv680->CIF == 1) { | 
|  | stv680->maxwidth = 352; | 
|  | stv680->maxheight = 288; | 
|  | stv680->vwidth = 352; | 
|  | stv680->vheight = 288; | 
|  | } | 
|  | if (stv680->QVGA == 1) { | 
|  | stv680->maxwidth = 320; | 
|  | stv680->maxheight = 240; | 
|  | stv680->vwidth = 320; | 
|  | stv680->vheight = 240; | 
|  | } | 
|  |  | 
|  | stv680->rawbufsize = bufsize;	/* must be ./. by 8 */ | 
|  | stv680->maxframesize = bufsize * 3;	/* RGB size */ | 
|  | PDEBUG (2, "STV(i): cwidth = %i, cheight = %i", stv680->cwidth, stv680->cheight); | 
|  | PDEBUG (1, "STV(i): width = %i, height = %i, rawbufsize = %li", stv680->vwidth, stv680->vheight, stv680->rawbufsize); | 
|  |  | 
|  | /* some default values */ | 
|  | stv680->bulk_in_endpointAddr = 0x82; | 
|  | stv680->dropped = 0; | 
|  | stv680->error = 0; | 
|  | stv680->framecount = 0; | 
|  | stv680->readcount = 0; | 
|  | stv680->streaming = 0; | 
|  | /* bright, white, colour, hue, contrast are set by software, not in stv0680 */ | 
|  | stv680->brightness = 32767; | 
|  | stv680->chgbright = 0; | 
|  | stv680->whiteness = 0;	/* only for greyscale */ | 
|  | stv680->colour = 32767; | 
|  | stv680->contrast = 32767; | 
|  | stv680->hue = 32767; | 
|  | stv680->palette = STV_VIDEO_PALETTE; | 
|  | stv680->depth = 24;	/* rgb24 bits */ | 
|  | if ((swapRGB_on == 0) && (swapRGB == 0)) | 
|  | PDEBUG (1, "STV(i): swapRGB is (auto) OFF"); | 
|  | else if ((swapRGB_on == 0) && (swapRGB == 1)) | 
|  | PDEBUG (1, "STV(i): swapRGB is (auto) ON"); | 
|  | else if (swapRGB_on == 1) | 
|  | PDEBUG (1, "STV(i): swapRGB is (forced) ON"); | 
|  | else if (swapRGB_on == -1) | 
|  | PDEBUG (1, "STV(i): swapRGB is (forced) OFF"); | 
|  |  | 
|  | if (stv_set_video_mode (stv680) < 0) { | 
|  | PDEBUG (0, "STV(e): Could not set video mode in stv_init"); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /***************** last of pencam  routines  *******************/ | 
|  |  | 
|  | /**************************************************************************** | 
|  | *  sysfs | 
|  | ***************************************************************************/ | 
|  | #define stv680_file(name, variable, field)				\ | 
|  | static ssize_t show_##name(struct class_device *class_dev, char *buf)	\ | 
|  | {									\ | 
|  | struct video_device *vdev = to_video_device(class_dev);		\ | 
|  | struct usb_stv *stv = video_get_drvdata(vdev);			\ | 
|  | return sprintf(buf, field, stv->variable);			\ | 
|  | }									\ | 
|  | static CLASS_DEVICE_ATTR(name, S_IRUGO, show_##name, NULL); | 
|  |  | 
|  | stv680_file(model, camera_name, "%s\n"); | 
|  | stv680_file(in_use, user, "%d\n"); | 
|  | stv680_file(streaming, streaming, "%d\n"); | 
|  | stv680_file(palette, palette, "%i\n"); | 
|  | stv680_file(frames_total, readcount, "%d\n"); | 
|  | stv680_file(frames_read, framecount, "%d\n"); | 
|  | stv680_file(packets_dropped, dropped, "%d\n"); | 
|  | stv680_file(decoding_errors, error, "%d\n"); | 
|  |  | 
|  | static void stv680_create_sysfs_files(struct video_device *vdev) | 
|  | { | 
|  | video_device_create_file(vdev, &class_device_attr_model); | 
|  | video_device_create_file(vdev, &class_device_attr_in_use); | 
|  | video_device_create_file(vdev, &class_device_attr_streaming); | 
|  | video_device_create_file(vdev, &class_device_attr_palette); | 
|  | video_device_create_file(vdev, &class_device_attr_frames_total); | 
|  | video_device_create_file(vdev, &class_device_attr_frames_read); | 
|  | video_device_create_file(vdev, &class_device_attr_packets_dropped); | 
|  | video_device_create_file(vdev, &class_device_attr_decoding_errors); | 
|  | } | 
|  |  | 
|  | static void stv680_remove_sysfs_files(struct video_device *vdev) | 
|  | { | 
|  | video_device_remove_file(vdev, &class_device_attr_model); | 
|  | video_device_remove_file(vdev, &class_device_attr_in_use); | 
|  | video_device_remove_file(vdev, &class_device_attr_streaming); | 
|  | video_device_remove_file(vdev, &class_device_attr_palette); | 
|  | video_device_remove_file(vdev, &class_device_attr_frames_total); | 
|  | video_device_remove_file(vdev, &class_device_attr_frames_read); | 
|  | video_device_remove_file(vdev, &class_device_attr_packets_dropped); | 
|  | video_device_remove_file(vdev, &class_device_attr_decoding_errors); | 
|  | } | 
|  |  | 
|  | /******************************************************************** | 
|  | * Camera control | 
|  | *******************************************************************/ | 
|  |  | 
|  | static int stv680_get_pict (struct usb_stv *stv680, struct video_picture *p) | 
|  | { | 
|  | /* This sets values for v4l interface. max/min = 65535/0  */ | 
|  |  | 
|  | p->brightness = stv680->brightness; | 
|  | p->whiteness = stv680->whiteness;	/* greyscale */ | 
|  | p->colour = stv680->colour; | 
|  | p->contrast = stv680->contrast; | 
|  | p->hue = stv680->hue; | 
|  | p->palette = stv680->palette; | 
|  | p->depth = stv680->depth; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int stv680_set_pict (struct usb_stv *stv680, struct video_picture *p) | 
|  | { | 
|  | /* See above stv680_get_pict  */ | 
|  |  | 
|  | if (p->palette != STV_VIDEO_PALETTE) { | 
|  | PDEBUG (2, "STV(e): Palette set error in _set_pic"); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | if (stv680->brightness != p->brightness) { | 
|  | stv680->chgbright = 1; | 
|  | stv680->brightness = p->brightness; | 
|  | } | 
|  |  | 
|  | stv680->whiteness = p->whiteness;	/* greyscale */ | 
|  | stv680->colour = p->colour; | 
|  | stv680->contrast = p->contrast; | 
|  | stv680->hue = p->hue; | 
|  | stv680->palette = p->palette; | 
|  | stv680->depth = p->depth; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void stv680_video_irq (struct urb *urb, struct pt_regs *regs) | 
|  | { | 
|  | struct usb_stv *stv680 = urb->context; | 
|  | int length = urb->actual_length; | 
|  |  | 
|  | if (length < stv680->rawbufsize) | 
|  | PDEBUG (2, "STV(i): Lost data in transfer: exp %li, got %i", stv680->rawbufsize, length); | 
|  |  | 
|  | /* ohoh... */ | 
|  | if (!stv680->streaming) | 
|  | return; | 
|  |  | 
|  | if (!stv680->udev) { | 
|  | PDEBUG (0, "STV(e): device vapourished in video_irq"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* 0 sized packets happen if we are to fast, but sometimes the camera | 
|  | keeps sending them forever... | 
|  | */ | 
|  | if (length && !urb->status) { | 
|  | stv680->nullpackets = 0; | 
|  | switch (stv680->scratch[stv680->scratch_next].state) { | 
|  | case BUFFER_READY: | 
|  | case BUFFER_BUSY: | 
|  | stv680->dropped++; | 
|  | break; | 
|  |  | 
|  | case BUFFER_UNUSED: | 
|  | memcpy (stv680->scratch[stv680->scratch_next].data, | 
|  | (unsigned char *) urb->transfer_buffer, length); | 
|  | stv680->scratch[stv680->scratch_next].state = BUFFER_READY; | 
|  | stv680->scratch[stv680->scratch_next].length = length; | 
|  | if (waitqueue_active (&stv680->wq)) { | 
|  | wake_up_interruptible (&stv680->wq); | 
|  | } | 
|  | stv680->scratch_overflow = 0; | 
|  | stv680->scratch_next++; | 
|  | if (stv680->scratch_next >= STV680_NUMSCRATCH) | 
|  | stv680->scratch_next = 0; | 
|  | break; | 
|  | }		/* switch  */ | 
|  | } else { | 
|  | stv680->nullpackets++; | 
|  | if (stv680->nullpackets > STV680_MAX_NULLPACKETS) { | 
|  | if (waitqueue_active (&stv680->wq)) { | 
|  | wake_up_interruptible (&stv680->wq); | 
|  | } | 
|  | } | 
|  | }			/*  if - else */ | 
|  |  | 
|  | /* Resubmit urb for new data */ | 
|  | urb->status = 0; | 
|  | urb->dev = stv680->udev; | 
|  | if (usb_submit_urb (urb, GFP_ATOMIC)) | 
|  | PDEBUG (0, "STV(e): urb burned down in video irq"); | 
|  | return; | 
|  | }				/*  _video_irq  */ | 
|  |  | 
|  | static int stv680_start_stream (struct usb_stv *stv680) | 
|  | { | 
|  | struct urb *urb; | 
|  | int err = 0, i; | 
|  |  | 
|  | stv680->streaming = 1; | 
|  |  | 
|  | /* Do some memory allocation */ | 
|  | for (i = 0; i < STV680_NUMFRAMES; i++) { | 
|  | stv680->frame[i].data = stv680->fbuf + i * stv680->maxframesize; | 
|  | stv680->frame[i].curpix = 0; | 
|  | } | 
|  | /* packet size = 4096  */ | 
|  | for (i = 0; i < STV680_NUMSBUF; i++) { | 
|  | stv680->sbuf[i].data = kmalloc (stv680->rawbufsize, GFP_KERNEL); | 
|  | if (stv680->sbuf[i].data == NULL) { | 
|  | PDEBUG (0, "STV(e): Could not kmalloc raw data buffer %i", i); | 
|  | return -1; | 
|  | } | 
|  | } | 
|  |  | 
|  | stv680->scratch_next = 0; | 
|  | stv680->scratch_use = 0; | 
|  | stv680->scratch_overflow = 0; | 
|  | for (i = 0; i < STV680_NUMSCRATCH; i++) { | 
|  | stv680->scratch[i].data = kmalloc (stv680->rawbufsize, GFP_KERNEL); | 
|  | if (stv680->scratch[i].data == NULL) { | 
|  | PDEBUG (0, "STV(e): Could not kmalloc raw scratch buffer %i", i); | 
|  | return -1; | 
|  | } | 
|  | stv680->scratch[i].state = BUFFER_UNUSED; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < STV680_NUMSBUF; i++) { | 
|  | urb = usb_alloc_urb (0, GFP_KERNEL); | 
|  | if (!urb) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* sbuf is urb->transfer_buffer, later gets memcpyed to scratch */ | 
|  | usb_fill_bulk_urb (urb, stv680->udev, | 
|  | usb_rcvbulkpipe (stv680->udev, stv680->bulk_in_endpointAddr), | 
|  | stv680->sbuf[i].data, stv680->rawbufsize, | 
|  | stv680_video_irq, stv680); | 
|  | stv680->urb[i] = urb; | 
|  | err = usb_submit_urb (stv680->urb[i], GFP_KERNEL); | 
|  | if (err) | 
|  | PDEBUG (0, "STV(e): urb burned down in start stream"); | 
|  | }			/* i STV680_NUMSBUF */ | 
|  |  | 
|  | stv680->framecount = 0; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int stv680_stop_stream (struct usb_stv *stv680) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | if (!stv680->streaming || !stv680->udev) | 
|  | return 1; | 
|  |  | 
|  | stv680->streaming = 0; | 
|  |  | 
|  | for (i = 0; i < STV680_NUMSBUF; i++) | 
|  | if (stv680->urb[i]) { | 
|  | usb_kill_urb (stv680->urb[i]); | 
|  | usb_free_urb (stv680->urb[i]); | 
|  | stv680->urb[i] = NULL; | 
|  | kfree (stv680->sbuf[i].data); | 
|  | } | 
|  | for (i = 0; i < STV680_NUMSCRATCH; i++) { | 
|  | kfree (stv680->scratch[i].data); | 
|  | stv680->scratch[i].data = NULL; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int stv680_set_size (struct usb_stv *stv680, int width, int height) | 
|  | { | 
|  | int wasstreaming = stv680->streaming; | 
|  |  | 
|  | /* Check to see if we need to change */ | 
|  | if ((stv680->vwidth == width) && (stv680->vheight == height)) | 
|  | return 0; | 
|  |  | 
|  | PDEBUG (1, "STV(i): size request for %i x %i", width, height); | 
|  | /* Check for a valid mode */ | 
|  | if ((!width || !height) || ((width & 1) || (height & 1))) { | 
|  | PDEBUG (1, "STV(e): set_size error: request: v.width = %i, v.height = %i  actual: stv.width = %i, stv.height = %i", width, height, stv680->vwidth, stv680->vheight); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | if ((width < (stv680->maxwidth / 2)) || (height < (stv680->maxheight / 2))) { | 
|  | width = stv680->maxwidth / 2; | 
|  | height = stv680->maxheight / 2; | 
|  | } else if ((width >= 158) && (width <= 166) && (stv680->QVGA == 1)) { | 
|  | width = 160; | 
|  | height = 120; | 
|  | } else if ((width >= 172) && (width <= 180) && (stv680->CIF == 1)) { | 
|  | width = 176; | 
|  | height = 144; | 
|  | } else if ((width >= 318) && (width <= 350) && (stv680->QVGA == 1)) { | 
|  | width = 320; | 
|  | height = 240; | 
|  | } else if ((width >= 350) && (width <= 358) && (stv680->CIF == 1)) { | 
|  | width = 352; | 
|  | height = 288; | 
|  | } else { | 
|  | PDEBUG (1, "STV(e): request for non-supported size: request: v.width = %i, v.height = %i  actual: stv.width = %i, stv.height = %i", width, height, stv680->vwidth, stv680->vheight); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* Stop a current stream and start it again at the new size */ | 
|  | if (wasstreaming) | 
|  | stv680_stop_stream (stv680); | 
|  | stv680->vwidth = width; | 
|  | stv680->vheight = height; | 
|  | PDEBUG (1, "STV(i): size set to %i x %i", stv680->vwidth, stv680->vheight); | 
|  | if (wasstreaming) | 
|  | stv680_start_stream (stv680); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /********************************************************************** | 
|  | * Video Decoding | 
|  | **********************************************************************/ | 
|  |  | 
|  | /*******  routines from the pencam program; hey, they work!  ********/ | 
|  |  | 
|  | /* | 
|  | * STV0680 Vision Camera Chipset Driver | 
|  | * Copyright (C) 2000 Adam Harrison <adam@antispin.org> | 
|  | */ | 
|  |  | 
|  | #define RED 0 | 
|  | #define GREEN 1 | 
|  | #define BLUE 2 | 
|  | #define AD(x, y, w) (((y)*(w)+(x))*3) | 
|  |  | 
|  | static void bayer_unshuffle (struct usb_stv *stv680, struct stv680_scratch *buffer) | 
|  | { | 
|  | int x, y, i; | 
|  | int w = stv680->cwidth; | 
|  | int vw = stv680->cwidth, vh = stv680->cheight; | 
|  | unsigned int p = 0; | 
|  | int colour = 0, bayer = 0; | 
|  | unsigned char *raw = buffer->data; | 
|  | struct stv680_frame *frame = &stv680->frame[stv680->curframe]; | 
|  | unsigned char *output = frame->data; | 
|  | unsigned char *temp = frame->data; | 
|  | int offset = buffer->offset; | 
|  |  | 
|  | if (frame->curpix == 0) { | 
|  | if (frame->grabstate == FRAME_READY) { | 
|  | frame->grabstate = FRAME_GRABBING; | 
|  | } | 
|  | } | 
|  | if (offset != frame->curpix) {	/* Regard frame as lost :( */ | 
|  | frame->curpix = 0; | 
|  | stv680->error++; | 
|  | return; | 
|  | } | 
|  |  | 
|  | if ((stv680->vwidth == 320) || (stv680->vwidth == 160)) { | 
|  | vw = 320; | 
|  | vh = 240; | 
|  | } | 
|  | if ((stv680->vwidth == 352) || (stv680->vwidth == 176)) { | 
|  | vw = 352; | 
|  | vh = 288; | 
|  | } | 
|  |  | 
|  | memset (output, 0, 3 * vw * vh);	/* clear output matrix. */ | 
|  |  | 
|  | for (y = 0; y < vh; y++) { | 
|  | for (x = 0; x < vw; x++) { | 
|  | if (x & 1) | 
|  | p = *(raw + y * w + (x >> 1)); | 
|  | else | 
|  | p = *(raw + y * w + (x >> 1) + (w >> 1)); | 
|  |  | 
|  | if (y & 1) | 
|  | bayer = 2; | 
|  | else | 
|  | bayer = 0; | 
|  | if (x & 1) | 
|  | bayer++; | 
|  |  | 
|  | switch (bayer) { | 
|  | case 0: | 
|  | case 3: | 
|  | colour = 1; | 
|  | break; | 
|  | case 1: | 
|  | colour = 0; | 
|  | break; | 
|  | case 2: | 
|  | colour = 2; | 
|  | break; | 
|  | } | 
|  | i = (y * vw + x) * 3; | 
|  | *(output + i + colour) = (unsigned char) p; | 
|  | }		/* for x */ | 
|  |  | 
|  | }			/* for y */ | 
|  |  | 
|  | /****** gamma correction plus hardcoded white balance */ | 
|  | /* Thanks to Alexander Schwartx <alexander.schwartx@gmx.net> for this code. | 
|  | Correction values red[], green[], blue[], are generated by | 
|  | (pow(i/256.0, GAMMA)*255.0)*white balanceRGB where GAMMA=0.55, 1<i<255. | 
|  | White balance (RGB)= 1.0, 1.17, 1.48. Values are calculated as double float and | 
|  | converted to unsigned char. Values are in stv680.h  */ | 
|  |  | 
|  | for (y = 0; y < vh; y++) { | 
|  | for (x = 0; x < vw; x++) { | 
|  | i = (y * vw + x) * 3; | 
|  | *(output + i) = red[*(output + i)]; | 
|  | *(output + i + 1) = green[*(output + i + 1)]; | 
|  | *(output + i + 2) = blue[*(output + i + 2)]; | 
|  | } | 
|  | } | 
|  |  | 
|  | /******  bayer demosaic  ******/ | 
|  | for (y = 1; y < (vh - 1); y++) { | 
|  | for (x = 1; x < (vw - 1); x++) {	/* work out pixel type */ | 
|  | if (y & 1) | 
|  | bayer = 0; | 
|  | else | 
|  | bayer = 2; | 
|  | if (!(x & 1)) | 
|  | bayer++; | 
|  |  | 
|  | switch (bayer) { | 
|  | case 0:	/* green. blue lr, red tb */ | 
|  | *(output + AD (x, y, vw) + BLUE) = ((int) *(output + AD (x - 1, y, vw) + BLUE) + (int) *(output + AD (x + 1, y, vw) + BLUE)) >> 1; | 
|  | *(output + AD (x, y, vw) + RED) = ((int) *(output + AD (x, y - 1, vw) + RED) + (int) *(output + AD (x, y + 1, vw) + RED)) >> 1; | 
|  | break; | 
|  |  | 
|  | case 1:	/* blue. green lrtb, red diagonals */ | 
|  | *(output + AD (x, y, vw) + GREEN) = ((int) *(output + AD (x - 1, y, vw) + GREEN) + (int) *(output + AD (x + 1, y, vw) + GREEN) + (int) *(output + AD (x, y - 1, vw) + GREEN) + (int) *(output + AD (x, y + 1, vw) + GREEN)) >> 2; | 
|  | *(output + AD (x, y, vw) + RED) = ((int) *(output + AD (x - 1, y - 1, vw) + RED) + (int) *(output + AD (x - 1, y + 1, vw) + RED) + (int) *(output + AD (x + 1, y - 1, vw) + RED) + (int) *(output + AD (x + 1, y + 1, vw) + RED)) >> 2; | 
|  | break; | 
|  |  | 
|  | case 2:	/* red. green lrtb, blue diagonals */ | 
|  | *(output + AD (x, y, vw) + GREEN) = ((int) *(output + AD (x - 1, y, vw) + GREEN) + (int) *(output + AD (x + 1, y, vw) + GREEN) + (int) *(output + AD (x, y - 1, vw) + GREEN) + (int) *(output + AD (x, y + 1, vw) + GREEN)) >> 2; | 
|  | *(output + AD (x, y, vw) + BLUE) = ((int) *(output + AD (x - 1, y - 1, vw) + BLUE) + (int) *(output + AD (x + 1, y - 1, vw) + BLUE) + (int) *(output + AD (x - 1, y + 1, vw) + BLUE) + (int) *(output + AD (x + 1, y + 1, vw) + BLUE)) >> 2; | 
|  | break; | 
|  |  | 
|  | case 3:	/* green. red lr, blue tb */ | 
|  | *(output + AD (x, y, vw) + RED) = ((int) *(output + AD (x - 1, y, vw) + RED) + (int) *(output + AD (x + 1, y, vw) + RED)) >> 1; | 
|  | *(output + AD (x, y, vw) + BLUE) = ((int) *(output + AD (x, y - 1, vw) + BLUE) + (int) *(output + AD (x, y + 1, vw) + BLUE)) >> 1; | 
|  | break; | 
|  | }	/* switch */ | 
|  | }		/* for x */ | 
|  | }			/* for y  - end demosaic  */ | 
|  |  | 
|  | /* fix top and bottom row, left and right side */ | 
|  | i = vw * 3; | 
|  | memcpy (output, (output + i), i); | 
|  | memcpy ((output + (vh * i)), (output + ((vh - 1) * i)), i); | 
|  | for (y = 0; y < vh; y++) { | 
|  | i = y * vw * 3; | 
|  | memcpy ((output + i), (output + i + 3), 3); | 
|  | memcpy ((output + i + (vw * 3)), (output + i + (vw - 1) * 3), 3); | 
|  | } | 
|  |  | 
|  | /*  process all raw data, then trim to size if necessary */ | 
|  | if ((stv680->vwidth == 160) || (stv680->vwidth == 176))  { | 
|  | i = 0; | 
|  | for (y = 0; y < vh; y++) { | 
|  | if (!(y & 1)) { | 
|  | for (x = 0; x < vw; x++) { | 
|  | p = (y * vw + x) * 3; | 
|  | if (!(x & 1)) { | 
|  | *(output + i) = *(output + p); | 
|  | *(output + i + 1) = *(output + p + 1); | 
|  | *(output + i + 2) = *(output + p + 2); | 
|  | i += 3; | 
|  | } | 
|  | }  /* for x */ | 
|  | } | 
|  | }  /* for y */ | 
|  | } | 
|  | /* reset to proper width */ | 
|  | if ((stv680->vwidth == 160)) { | 
|  | vw = 160; | 
|  | vh = 120; | 
|  | } | 
|  | if ((stv680->vwidth == 176)) { | 
|  | vw = 176; | 
|  | vh = 144; | 
|  | } | 
|  |  | 
|  | /* output is RGB; some programs want BGR  */ | 
|  | /* swapRGB_on=0 -> program decides;  swapRGB_on=1, always swap */ | 
|  | /* swapRGB_on=-1, never swap */ | 
|  | if (((swapRGB == 1) && (swapRGB_on != -1)) || (swapRGB_on == 1)) { | 
|  | for (y = 0; y < vh; y++) { | 
|  | for (x = 0; x < vw; x++) { | 
|  | i = (y * vw + x) * 3; | 
|  | *(temp) = *(output + i); | 
|  | *(output + i) = *(output + i + 2); | 
|  | *(output + i + 2) = *(temp); | 
|  | } | 
|  | } | 
|  | } | 
|  | /* brightness */ | 
|  | if (stv680->chgbright == 1) { | 
|  | if (stv680->brightness >= 32767) { | 
|  | p = (stv680->brightness - 32767) / 256; | 
|  | for (x = 0; x < (vw * vh * 3); x++) { | 
|  | if ((*(output + x) + (unsigned char) p) > 255) | 
|  | *(output + x) = 255; | 
|  | else | 
|  | *(output + x) += (unsigned char) p; | 
|  | }	/* for */ | 
|  | } else { | 
|  | p = (32767 - stv680->brightness) / 256; | 
|  | for (x = 0; x < (vw * vh * 3); x++) { | 
|  | if ((unsigned char) p > *(output + x)) | 
|  | *(output + x) = 0; | 
|  | else | 
|  | *(output + x) -= (unsigned char) p; | 
|  | }	/* for */ | 
|  | }		/* else */ | 
|  | } | 
|  | /* if */ | 
|  | frame->curpix = 0; | 
|  | frame->curlinepix = 0; | 
|  | frame->grabstate = FRAME_DONE; | 
|  | stv680->framecount++; | 
|  | stv680->readcount++; | 
|  | if (stv680->frame[(stv680->curframe + 1) & (STV680_NUMFRAMES - 1)].grabstate == FRAME_READY) { | 
|  | stv680->curframe = (stv680->curframe + 1) & (STV680_NUMFRAMES - 1); | 
|  | } | 
|  |  | 
|  | }				/* bayer_unshuffle */ | 
|  |  | 
|  | /*******  end routines from the pencam program  *********/ | 
|  |  | 
|  | static int stv680_newframe (struct usb_stv *stv680, int framenr) | 
|  | { | 
|  | int errors = 0; | 
|  |  | 
|  | while (stv680->streaming && (stv680->frame[framenr].grabstate == FRAME_READY || stv680->frame[framenr].grabstate == FRAME_GRABBING)) { | 
|  | if (!stv680->frame[framenr].curpix) { | 
|  | errors++; | 
|  | } | 
|  | wait_event_interruptible (stv680->wq, (stv680->scratch[stv680->scratch_use].state == BUFFER_READY)); | 
|  |  | 
|  | if (stv680->nullpackets > STV680_MAX_NULLPACKETS) { | 
|  | stv680->nullpackets = 0; | 
|  | PDEBUG (2, "STV(i): too many null length packets, restarting capture"); | 
|  | stv680_stop_stream (stv680); | 
|  | stv680_start_stream (stv680); | 
|  | } else { | 
|  | if (stv680->scratch[stv680->scratch_use].state != BUFFER_READY) { | 
|  | stv680->frame[framenr].grabstate = FRAME_ERROR; | 
|  | PDEBUG (2, "STV(e): FRAME_ERROR in _newframe"); | 
|  | return -EIO; | 
|  | } | 
|  | stv680->scratch[stv680->scratch_use].state = BUFFER_BUSY; | 
|  |  | 
|  | bayer_unshuffle (stv680, &stv680->scratch[stv680->scratch_use]); | 
|  |  | 
|  | stv680->scratch[stv680->scratch_use].state = BUFFER_UNUSED; | 
|  | stv680->scratch_use++; | 
|  | if (stv680->scratch_use >= STV680_NUMSCRATCH) | 
|  | stv680->scratch_use = 0; | 
|  | if (errors > STV680_MAX_ERRORS) { | 
|  | errors = 0; | 
|  | PDEBUG (2, "STV(i): too many errors, restarting capture"); | 
|  | stv680_stop_stream (stv680); | 
|  | stv680_start_stream (stv680); | 
|  | } | 
|  | }		/* else */ | 
|  | }			/* while */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /********************************************************************* | 
|  | * Video4Linux | 
|  | *********************************************************************/ | 
|  |  | 
|  | static int stv_open (struct inode *inode, struct file *file) | 
|  | { | 
|  | struct video_device *dev = video_devdata(file); | 
|  | struct usb_stv *stv680 = video_get_drvdata(dev); | 
|  | int err = 0; | 
|  |  | 
|  | /* we are called with the BKL held */ | 
|  | stv680->user = 1; | 
|  | err = stv_init (stv680);	/* main initialization routine for camera */ | 
|  |  | 
|  | if (err >= 0) { | 
|  | stv680->fbuf = rvmalloc (stv680->maxframesize * STV680_NUMFRAMES); | 
|  | if (!stv680->fbuf) { | 
|  | PDEBUG (0, "STV(e): Could not rvmalloc frame bufer"); | 
|  | err = -ENOMEM; | 
|  | } | 
|  | file->private_data = dev; | 
|  | } | 
|  | if (err) | 
|  | stv680->user = 0; | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int stv_close (struct inode *inode, struct file *file) | 
|  | { | 
|  | struct video_device *dev = file->private_data; | 
|  | struct usb_stv *stv680 = video_get_drvdata(dev); | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < STV680_NUMFRAMES; i++) | 
|  | stv680->frame[i].grabstate = FRAME_UNUSED; | 
|  | if (stv680->streaming) | 
|  | stv680_stop_stream (stv680); | 
|  |  | 
|  | if ((i = stv_stop_video (stv680)) < 0) | 
|  | PDEBUG (1, "STV(e): stop_video failed in stv_close"); | 
|  |  | 
|  | rvfree (stv680->fbuf, stv680->maxframesize * STV680_NUMFRAMES); | 
|  | stv680->user = 0; | 
|  |  | 
|  | if (stv680->removed) { | 
|  | kfree (stv680); | 
|  | stv680 = NULL; | 
|  | PDEBUG (0, "STV(i): device unregistered"); | 
|  | } | 
|  | file->private_data = NULL; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int stv680_do_ioctl (struct inode *inode, struct file *file, | 
|  | unsigned int cmd, void *arg) | 
|  | { | 
|  | struct video_device *vdev = file->private_data; | 
|  | struct usb_stv *stv680 = video_get_drvdata(vdev); | 
|  |  | 
|  | if (!stv680->udev) | 
|  | return -EIO; | 
|  |  | 
|  | switch (cmd) { | 
|  | case VIDIOCGCAP:{ | 
|  | struct video_capability *b = arg; | 
|  |  | 
|  | strcpy (b->name, stv680->camera_name); | 
|  | b->type = VID_TYPE_CAPTURE; | 
|  | b->channels = 1; | 
|  | b->audios = 0; | 
|  | b->maxwidth = stv680->maxwidth; | 
|  | b->maxheight = stv680->maxheight; | 
|  | b->minwidth = stv680->maxwidth / 2; | 
|  | b->minheight = stv680->maxheight / 2; | 
|  | return 0; | 
|  | } | 
|  | case VIDIOCGCHAN:{ | 
|  | struct video_channel *v = arg; | 
|  |  | 
|  | if (v->channel != 0) | 
|  | return -EINVAL; | 
|  | v->flags = 0; | 
|  | v->tuners = 0; | 
|  | v->type = VIDEO_TYPE_CAMERA; | 
|  | strcpy (v->name, "STV Camera"); | 
|  | return 0; | 
|  | } | 
|  | case VIDIOCSCHAN:{ | 
|  | struct video_channel *v = arg; | 
|  | if (v->channel != 0) | 
|  | return -EINVAL; | 
|  | return 0; | 
|  | } | 
|  | case VIDIOCGPICT:{ | 
|  | struct video_picture *p = arg; | 
|  |  | 
|  | stv680_get_pict (stv680, p); | 
|  | return 0; | 
|  | } | 
|  | case VIDIOCSPICT:{ | 
|  | struct video_picture *p = arg; | 
|  |  | 
|  | if (stv680_set_pict (stv680, p)) | 
|  | return -EINVAL; | 
|  | return 0; | 
|  | } | 
|  | case VIDIOCSWIN:{ | 
|  | struct video_window *vw = arg; | 
|  |  | 
|  | if (vw->flags) | 
|  | return -EINVAL; | 
|  | if (vw->clipcount) | 
|  | return -EINVAL; | 
|  | if (vw->width != stv680->vwidth) { | 
|  | if (stv680_set_size (stv680, vw->width, vw->height)) { | 
|  | PDEBUG (2, "STV(e): failed (from user) set size in VIDIOCSWIN"); | 
|  | return -EINVAL; | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  | case VIDIOCGWIN:{ | 
|  | struct video_window *vw = arg; | 
|  |  | 
|  | vw->x = 0;	/* FIXME */ | 
|  | vw->y = 0; | 
|  | vw->chromakey = 0; | 
|  | vw->flags = 0; | 
|  | vw->clipcount = 0; | 
|  | vw->width = stv680->vwidth; | 
|  | vw->height = stv680->vheight; | 
|  | return 0; | 
|  | } | 
|  | case VIDIOCGMBUF:{ | 
|  | struct video_mbuf *vm = arg; | 
|  | int i; | 
|  |  | 
|  | memset (vm, 0, sizeof (*vm)); | 
|  | vm->size = STV680_NUMFRAMES * stv680->maxframesize; | 
|  | vm->frames = STV680_NUMFRAMES; | 
|  | for (i = 0; i < STV680_NUMFRAMES; i++) | 
|  | vm->offsets[i] = stv680->maxframesize * i; | 
|  | return 0; | 
|  | } | 
|  | case VIDIOCMCAPTURE:{ | 
|  | struct video_mmap *vm = arg; | 
|  |  | 
|  | if (vm->format != STV_VIDEO_PALETTE) { | 
|  | PDEBUG (2, "STV(i): VIDIOCMCAPTURE vm.format (%i) != VIDEO_PALETTE (%i)", | 
|  | vm->format, STV_VIDEO_PALETTE); | 
|  | if ((vm->format == 3) && (swapRGB_on == 0))  { | 
|  | PDEBUG (2, "STV(i): VIDIOCMCAPTURE swapRGB is (auto) ON"); | 
|  | /* this may fix those apps (e.g., xawtv) that want BGR */ | 
|  | swapRGB = 1; | 
|  | } | 
|  | return -EINVAL; | 
|  | } | 
|  | if (vm->frame >= STV680_NUMFRAMES) { | 
|  | PDEBUG (2, "STV(e): VIDIOCMCAPTURE vm.frame > NUMFRAMES"); | 
|  | return -EINVAL; | 
|  | } | 
|  | if ((stv680->frame[vm->frame].grabstate == FRAME_ERROR) | 
|  | || (stv680->frame[vm->frame].grabstate == FRAME_GRABBING)) { | 
|  | PDEBUG (2, "STV(e): VIDIOCMCAPTURE grabstate (%i) error", | 
|  | stv680->frame[vm->frame].grabstate); | 
|  | return -EBUSY; | 
|  | } | 
|  | /* Is this according to the v4l spec??? */ | 
|  | if (stv680->vwidth != vm->width) { | 
|  | if (stv680_set_size (stv680, vm->width, vm->height)) { | 
|  | PDEBUG (2, "STV(e): VIDIOCMCAPTURE set_size failed"); | 
|  | return -EINVAL; | 
|  | } | 
|  | } | 
|  | stv680->frame[vm->frame].grabstate = FRAME_READY; | 
|  |  | 
|  | if (!stv680->streaming) | 
|  | stv680_start_stream (stv680); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | case VIDIOCSYNC:{ | 
|  | int *frame = arg; | 
|  | int ret = 0; | 
|  |  | 
|  | if (*frame < 0 || *frame >= STV680_NUMFRAMES) { | 
|  | PDEBUG (2, "STV(e): Bad frame # in VIDIOCSYNC"); | 
|  | return -EINVAL; | 
|  | } | 
|  | ret = stv680_newframe (stv680, *frame); | 
|  | stv680->frame[*frame].grabstate = FRAME_UNUSED; | 
|  | return ret; | 
|  | } | 
|  | case VIDIOCGFBUF:{ | 
|  | struct video_buffer *vb = arg; | 
|  |  | 
|  | memset (vb, 0, sizeof (*vb)); | 
|  | return 0; | 
|  | } | 
|  | case VIDIOCKEY: | 
|  | return 0; | 
|  | case VIDIOCCAPTURE: | 
|  | { | 
|  | PDEBUG (2, "STV(e): VIDIOCCAPTURE failed"); | 
|  | return -EINVAL; | 
|  | } | 
|  | case VIDIOCSFBUF: | 
|  | case VIDIOCGTUNER: | 
|  | case VIDIOCSTUNER: | 
|  | case VIDIOCGFREQ: | 
|  | case VIDIOCSFREQ: | 
|  | case VIDIOCGAUDIO: | 
|  | case VIDIOCSAUDIO: | 
|  | return -EINVAL; | 
|  | default: | 
|  | return -ENOIOCTLCMD; | 
|  | }			/* end switch */ | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int stv680_ioctl(struct inode *inode, struct file *file, | 
|  | unsigned int cmd, unsigned long arg) | 
|  | { | 
|  | return video_usercopy(inode, file, cmd, arg, stv680_do_ioctl); | 
|  | } | 
|  |  | 
|  | static int stv680_mmap (struct file *file, struct vm_area_struct *vma) | 
|  | { | 
|  | struct video_device *dev = file->private_data; | 
|  | struct usb_stv *stv680 = video_get_drvdata(dev); | 
|  | unsigned long start = vma->vm_start; | 
|  | unsigned long size  = vma->vm_end-vma->vm_start; | 
|  | unsigned long page, pos; | 
|  |  | 
|  | down (&stv680->lock); | 
|  |  | 
|  | if (stv680->udev == NULL) { | 
|  | up (&stv680->lock); | 
|  | return -EIO; | 
|  | } | 
|  | if (size > (((STV680_NUMFRAMES * stv680->maxframesize) + PAGE_SIZE - 1) | 
|  | & ~(PAGE_SIZE - 1))) { | 
|  | up (&stv680->lock); | 
|  | return -EINVAL; | 
|  | } | 
|  | pos = (unsigned long) stv680->fbuf; | 
|  | while (size > 0) { | 
|  | page = vmalloc_to_pfn((void *)pos); | 
|  | if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) { | 
|  | up (&stv680->lock); | 
|  | return -EAGAIN; | 
|  | } | 
|  | start += PAGE_SIZE; | 
|  | pos += PAGE_SIZE; | 
|  | if (size > PAGE_SIZE) | 
|  | size -= PAGE_SIZE; | 
|  | else | 
|  | size = 0; | 
|  | } | 
|  | up (&stv680->lock); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static ssize_t stv680_read (struct file *file, char __user *buf, | 
|  | size_t count, loff_t *ppos) | 
|  | { | 
|  | struct video_device *dev = file->private_data; | 
|  | unsigned long int realcount = count; | 
|  | int ret = 0; | 
|  | struct usb_stv *stv680 = video_get_drvdata(dev); | 
|  | unsigned long int i; | 
|  |  | 
|  | if (STV680_NUMFRAMES != 2) { | 
|  | PDEBUG (0, "STV(e): STV680_NUMFRAMES needs to be 2!"); | 
|  | return -1; | 
|  | } | 
|  | if (stv680->udev == NULL) | 
|  | return -EIO; | 
|  | if (realcount > (stv680->vwidth * stv680->vheight * 3)) | 
|  | realcount = stv680->vwidth * stv680->vheight * 3; | 
|  |  | 
|  | /* Shouldn't happen: */ | 
|  | if (stv680->frame[0].grabstate == FRAME_GRABBING) { | 
|  | PDEBUG (2, "STV(e): FRAME_GRABBING in stv680_read"); | 
|  | return -EBUSY; | 
|  | } | 
|  | stv680->frame[0].grabstate = FRAME_READY; | 
|  | stv680->frame[1].grabstate = FRAME_UNUSED; | 
|  | stv680->curframe = 0; | 
|  |  | 
|  | if (!stv680->streaming) | 
|  | stv680_start_stream (stv680); | 
|  |  | 
|  | if (!stv680->streaming) { | 
|  | ret = stv680_newframe (stv680, 0);	/* ret should = 0 */ | 
|  | } | 
|  |  | 
|  | ret = stv680_newframe (stv680, 0); | 
|  |  | 
|  | if (!ret) { | 
|  | if ((i = copy_to_user (buf, stv680->frame[0].data, realcount)) != 0) { | 
|  | PDEBUG (2, "STV(e): copy_to_user frame 0 failed, ret count = %li", i); | 
|  | return -EFAULT; | 
|  | } | 
|  | } else { | 
|  | realcount = ret; | 
|  | } | 
|  | stv680->frame[0].grabstate = FRAME_UNUSED; | 
|  | return realcount; | 
|  | }				/* stv680_read */ | 
|  |  | 
|  | static struct file_operations stv680_fops = { | 
|  | .owner =	THIS_MODULE, | 
|  | .open =		stv_open, | 
|  | .release =     	stv_close, | 
|  | .read =		stv680_read, | 
|  | .mmap =		stv680_mmap, | 
|  | .ioctl =        stv680_ioctl, | 
|  | .llseek =       no_llseek, | 
|  | }; | 
|  | static struct video_device stv680_template = { | 
|  | .owner =	THIS_MODULE, | 
|  | .name =		"STV0680 USB camera", | 
|  | .type =		VID_TYPE_CAPTURE, | 
|  | .hardware =	VID_HARDWARE_SE401, | 
|  | .fops =         &stv680_fops, | 
|  | .release =	video_device_release, | 
|  | .minor = 	-1, | 
|  | }; | 
|  |  | 
|  | static int stv680_probe (struct usb_interface *intf, const struct usb_device_id *id) | 
|  | { | 
|  | struct usb_device *dev = interface_to_usbdev(intf); | 
|  | struct usb_host_interface *interface; | 
|  | struct usb_stv *stv680 = NULL; | 
|  | char *camera_name = NULL; | 
|  | int retval = 0; | 
|  |  | 
|  | /* We don't handle multi-config cameras */ | 
|  | if (dev->descriptor.bNumConfigurations != 1) { | 
|  | PDEBUG (0, "STV(e): Number of Configurations != 1"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | interface = &intf->altsetting[0]; | 
|  | /* Is it a STV680? */ | 
|  | if ((le16_to_cpu(dev->descriptor.idVendor) == USB_PENCAM_VENDOR_ID) && | 
|  | (le16_to_cpu(dev->descriptor.idProduct) == USB_PENCAM_PRODUCT_ID)) { | 
|  | camera_name = "STV0680"; | 
|  | PDEBUG (0, "STV(i): STV0680 camera found."); | 
|  | } else if ((le16_to_cpu(dev->descriptor.idVendor) == USB_CREATIVEGOMINI_VENDOR_ID) && | 
|  | (le16_to_cpu(dev->descriptor.idProduct) == USB_CREATIVEGOMINI_PRODUCT_ID)) { | 
|  | camera_name = "Creative WebCam Go Mini"; | 
|  | PDEBUG (0, "STV(i): Creative WebCam Go Mini found."); | 
|  | } else { | 
|  | PDEBUG (0, "STV(e): Vendor/Product ID do not match STV0680 or Creative WebCam Go Mini values."); | 
|  | PDEBUG (0, "STV(e): Check that the STV0680 or Creative WebCam Go Mini camera is connected to the computer."); | 
|  | retval = -ENODEV; | 
|  | goto error; | 
|  | } | 
|  | /* We found one */ | 
|  | if ((stv680 = kmalloc (sizeof (*stv680), GFP_KERNEL)) == NULL) { | 
|  | PDEBUG (0, "STV(e): couldn't kmalloc stv680 struct."); | 
|  | retval = -ENOMEM; | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | memset (stv680, 0, sizeof (*stv680)); | 
|  |  | 
|  | stv680->udev = dev; | 
|  | stv680->camera_name = camera_name; | 
|  |  | 
|  | stv680->vdev = video_device_alloc(); | 
|  | if (!stv680->vdev) { | 
|  | retval = -ENOMEM; | 
|  | goto error; | 
|  | } | 
|  | memcpy(stv680->vdev, &stv680_template, sizeof(stv680_template)); | 
|  | stv680->vdev->dev = &intf->dev; | 
|  | video_set_drvdata(stv680->vdev, stv680); | 
|  |  | 
|  | memcpy (stv680->vdev->name, stv680->camera_name, strlen (stv680->camera_name)); | 
|  | init_waitqueue_head (&stv680->wq); | 
|  | init_MUTEX (&stv680->lock); | 
|  | wmb (); | 
|  |  | 
|  | if (video_register_device (stv680->vdev, VFL_TYPE_GRABBER, video_nr) == -1) { | 
|  | PDEBUG (0, "STV(e): video_register_device failed"); | 
|  | retval = -EIO; | 
|  | goto error_vdev; | 
|  | } | 
|  | PDEBUG (0, "STV(i): registered new video device: video%d", stv680->vdev->minor); | 
|  |  | 
|  | usb_set_intfdata (intf, stv680); | 
|  | stv680_create_sysfs_files(stv680->vdev); | 
|  | return 0; | 
|  |  | 
|  | error_vdev: | 
|  | video_device_release(stv680->vdev); | 
|  | error: | 
|  | kfree(stv680); | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static inline void usb_stv680_remove_disconnected (struct usb_stv *stv680) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | stv680->udev = NULL; | 
|  | stv680->frame[0].grabstate = FRAME_ERROR; | 
|  | stv680->frame[1].grabstate = FRAME_ERROR; | 
|  | stv680->streaming = 0; | 
|  |  | 
|  | wake_up_interruptible (&stv680->wq); | 
|  |  | 
|  | for (i = 0; i < STV680_NUMSBUF; i++) | 
|  | if (stv680->urb[i]) { | 
|  | usb_kill_urb (stv680->urb[i]); | 
|  | usb_free_urb (stv680->urb[i]); | 
|  | stv680->urb[i] = NULL; | 
|  | kfree (stv680->sbuf[i].data); | 
|  | } | 
|  | for (i = 0; i < STV680_NUMSCRATCH; i++) | 
|  | kfree (stv680->scratch[i].data); | 
|  | PDEBUG (0, "STV(i): %s disconnected", stv680->camera_name); | 
|  |  | 
|  | /* Free the memory */ | 
|  | kfree (stv680); | 
|  | } | 
|  |  | 
|  | static void stv680_disconnect (struct usb_interface *intf) | 
|  | { | 
|  | struct usb_stv *stv680 = usb_get_intfdata (intf); | 
|  |  | 
|  | usb_set_intfdata (intf, NULL); | 
|  |  | 
|  | if (stv680) { | 
|  | /* We don't want people trying to open up the device */ | 
|  | if (stv680->vdev) { | 
|  | stv680_remove_sysfs_files(stv680->vdev); | 
|  | video_unregister_device(stv680->vdev); | 
|  | stv680->vdev = NULL; | 
|  | } | 
|  | if (!stv680->user) { | 
|  | usb_stv680_remove_disconnected (stv680); | 
|  | } else { | 
|  | stv680->removed = 1; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static struct usb_driver stv680_driver = { | 
|  | .owner =	THIS_MODULE, | 
|  | .name =		"stv680", | 
|  | .probe =	stv680_probe, | 
|  | .disconnect =	stv680_disconnect, | 
|  | .id_table =	device_table | 
|  | }; | 
|  |  | 
|  | /******************************************************************** | 
|  | *  Module routines | 
|  | ********************************************************************/ | 
|  |  | 
|  | static int __init usb_stv680_init (void) | 
|  | { | 
|  | if (usb_register (&stv680_driver) < 0) { | 
|  | PDEBUG (0, "STV(e): Could not setup STV0680 driver"); | 
|  | return -1; | 
|  | } | 
|  | PDEBUG (0, "STV(i): usb camera driver version %s registering", DRIVER_VERSION); | 
|  |  | 
|  | info(DRIVER_DESC " " DRIVER_VERSION); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __exit usb_stv680_exit (void) | 
|  | { | 
|  | usb_deregister (&stv680_driver); | 
|  | PDEBUG (0, "STV(i): driver deregistered"); | 
|  | } | 
|  |  | 
|  | module_init (usb_stv680_init); | 
|  | module_exit (usb_stv680_exit); |