| /* |
| * sisusb - usb kernel driver for Net2280/SiS315 based USB2VGA dongles |
| * |
| * Copyright (C) 2005 by Thomas Winischhofer, Vienna, Austria |
| * |
| * If distributed as part of the Linux kernel, this code is licensed under the |
| * terms of the GPL v2. |
| * |
| * Otherwise, the following license terms apply: |
| * |
| * * Redistribution and use in source and binary forms, with or without |
| * * modification, are permitted provided that the following conditions |
| * * are met: |
| * * 1) Redistributions of source code must retain the above copyright |
| * * notice, this list of conditions and the following disclaimer. |
| * * 2) Redistributions in binary form must reproduce the above copyright |
| * * notice, this list of conditions and the following disclaimer in the |
| * * documentation and/or other materials provided with the distribution. |
| * * 3) The name of the author may not be used to endorse or promote products |
| * * derived from this software without specific prior written permission. |
| * * |
| * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESSED OR |
| * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES |
| * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. |
| * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Author: Thomas Winischhofer <thomas@winischhofer.net> |
| * |
| */ |
| |
| #ifndef _SISUSB_H_ |
| #define _SISUSB_H_ |
| |
| #ifdef CONFIG_COMPAT |
| #if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,10) |
| #include <linux/ioctl32.h> |
| #define SISUSB_OLD_CONFIG_COMPAT |
| #else |
| #define SISUSB_NEW_CONFIG_COMPAT |
| #endif |
| #endif |
| |
| /* Version Information */ |
| |
| #define SISUSB_VERSION 0 |
| #define SISUSB_REVISION 0 |
| #define SISUSB_PATCHLEVEL 7 |
| |
| /* USB related */ |
| |
| #define SISUSB_MINOR 133 /* FIXME */ |
| |
| /* Size of the sisusb input/output buffers */ |
| #define SISUSB_IBUF_SIZE 0x01000 |
| #define SISUSB_OBUF_SIZE 0x10000 /* fixed */ |
| |
| #define NUMOBUFS 8 /* max number of output buffers/output URBs */ |
| |
| /* About endianness: |
| * |
| * 1) I/O ports, PCI config registers. The read/write() |
| * calls emulate inX/outX. Hence, the data is |
| * expected/delivered in machine endiannes by this |
| * driver. |
| * 2) Video memory. The data is copied 1:1. There is |
| * no swapping. Ever. This means for userland that |
| * the data has to be prepared properly. (Hint: |
| * think graphics data format, command queue, |
| * hardware cursor.) |
| * 3) MMIO. Data is copied 1:1. MMIO must be swapped |
| * properly by userland. |
| * |
| */ |
| |
| #ifdef __BIG_ENDIAN |
| #define SISUSB_CORRECT_ENDIANNESS_PACKET(p) \ |
| do { \ |
| p->header = cpu_to_le16(p->header); \ |
| p->address = cpu_to_le32(p->address); \ |
| p->data = cpu_to_le32(p->data); \ |
| } while(0) |
| #else |
| #define SISUSB_CORRECT_ENDIANNESS_PACKET(p) |
| #endif |
| |
| struct sisusb_usb_data; |
| |
| struct sisusb_urb_context { /* urb->context for outbound bulk URBs */ |
| struct sisusb_usb_data *sisusb; |
| int urbindex; |
| int *actual_length; |
| }; |
| |
| struct sisusb_usb_data { |
| struct usb_device *sisusb_dev; |
| struct usb_interface *interface; |
| struct kref kref; |
| wait_queue_head_t wait_q; /* for syncind and timeouts */ |
| struct semaphore lock; /* general race avoidance */ |
| unsigned int ifnum; /* interface number of the USB device */ |
| int minor; /* minor (for logging clarity) */ |
| int isopen; /* !=0 if open */ |
| int present; /* !=0 if device is present on the bus */ |
| int ready; /* !=0 if device is ready for userland */ |
| #ifdef SISUSB_OLD_CONFIG_COMPAT |
| int ioctl32registered; |
| #endif |
| int numobufs; /* number of obufs = number of out urbs */ |
| char *obuf[NUMOBUFS], *ibuf; /* transfer buffers */ |
| int obufsize, ibufsize; |
| dma_addr_t transfer_dma_out[NUMOBUFS]; |
| dma_addr_t transfer_dma_in; |
| struct urb *sisurbout[NUMOBUFS]; |
| struct urb *sisurbin; |
| unsigned char urbstatus[NUMOBUFS]; |
| unsigned char completein; |
| struct sisusb_urb_context urbout_context[NUMOBUFS]; |
| unsigned long flagb0; |
| unsigned long vrambase; /* framebuffer base */ |
| unsigned int vramsize; /* framebuffer size (bytes) */ |
| unsigned long mmiobase; |
| unsigned int mmiosize; |
| unsigned long ioportbase; |
| unsigned char devinit; /* device initialized? */ |
| unsigned char gfxinit; /* graphics core initialized? */ |
| unsigned short chipid, chipvendor; |
| unsigned short chiprevision; |
| }; |
| |
| #define to_sisusb_dev(d) container_of(d, struct sisusb_usb_data, kref) |
| |
| /* USB transport related */ |
| |
| /* urbstatus */ |
| #define SU_URB_BUSY 1 |
| #define SU_URB_ALLOC 2 |
| |
| /* Endpoints */ |
| |
| #define SISUSB_EP_GFX_IN 0x0e /* gfx std packet out(0e)/in(8e) */ |
| #define SISUSB_EP_GFX_OUT 0x0e |
| |
| #define SISUSB_EP_GFX_BULK_OUT 0x01 /* gfx mem bulk out/in */ |
| #define SISUSB_EP_GFX_BULK_IN 0x02 /* ? 2 is "OUT" ? */ |
| |
| #define SISUSB_EP_GFX_LBULK_OUT 0x03 /* gfx large mem bulk out */ |
| |
| #define SISUSB_EP_UNKNOWN_04 0x04 /* ? 4 is "OUT" ? - unused */ |
| |
| #define SISUSB_EP_BRIDGE_IN 0x0d /* Net2280 out(0d)/in(8d) */ |
| #define SISUSB_EP_BRIDGE_OUT 0x0d |
| |
| #define SISUSB_TYPE_MEM 0 |
| #define SISUSB_TYPE_IO 1 |
| |
| struct sisusb_packet { |
| unsigned short header; |
| u32 address; |
| u32 data; |
| } __attribute__((__packed__)); |
| |
| #define CLEARPACKET(packet) memset(packet, 0, 10) |
| |
| /* PCI bridge related */ |
| |
| #define SISUSB_PCI_MEMBASE 0xd0000000 |
| #define SISUSB_PCI_MMIOBASE 0xe4000000 |
| #define SISUSB_PCI_IOPORTBASE 0x0000d000 |
| |
| #define SISUSB_PCI_PSEUDO_MEMBASE 0x10000000 |
| #define SISUSB_PCI_PSEUDO_MMIOBASE 0x20000000 |
| #define SISUSB_PCI_PSEUDO_IOPORTBASE 0x0000d000 |
| #define SISUSB_PCI_PSEUDO_PCIBASE 0x00010000 |
| |
| #define SISUSB_PCI_MMIOSIZE (128*1024) |
| #define SISUSB_PCI_PCONFSIZE 0x5c |
| |
| /* graphics core related */ |
| |
| #define AROFFSET 0x40 |
| #define ARROFFSET 0x41 |
| #define GROFFSET 0x4e |
| #define SROFFSET 0x44 |
| #define CROFFSET 0x54 |
| #define MISCROFFSET 0x4c |
| #define MISCWOFFSET 0x42 |
| #define INPUTSTATOFFSET 0x5A |
| #define PART1OFFSET 0x04 |
| #define PART2OFFSET 0x10 |
| #define PART3OFFSET 0x12 |
| #define PART4OFFSET 0x14 |
| #define PART5OFFSET 0x16 |
| #define CAPTUREOFFSET 0x00 |
| #define VIDEOOFFSET 0x02 |
| #define COLREGOFFSET 0x48 |
| #define PELMASKOFFSET 0x46 |
| #define VGAENABLE 0x43 |
| |
| #define SISAR SISUSB_PCI_IOPORTBASE + AROFFSET |
| #define SISARR SISUSB_PCI_IOPORTBASE + ARROFFSET |
| #define SISGR SISUSB_PCI_IOPORTBASE + GROFFSET |
| #define SISSR SISUSB_PCI_IOPORTBASE + SROFFSET |
| #define SISCR SISUSB_PCI_IOPORTBASE + CROFFSET |
| #define SISMISCR SISUSB_PCI_IOPORTBASE + MISCROFFSET |
| #define SISMISCW SISUSB_PCI_IOPORTBASE + MISCWOFFSET |
| #define SISINPSTAT SISUSB_PCI_IOPORTBASE + INPUTSTATOFFSET |
| #define SISPART1 SISUSB_PCI_IOPORTBASE + PART1OFFSET |
| #define SISPART2 SISUSB_PCI_IOPORTBASE + PART2OFFSET |
| #define SISPART3 SISUSB_PCI_IOPORTBASE + PART3OFFSET |
| #define SISPART4 SISUSB_PCI_IOPORTBASE + PART4OFFSET |
| #define SISPART5 SISUSB_PCI_IOPORTBASE + PART5OFFSET |
| #define SISCAP SISUSB_PCI_IOPORTBASE + CAPTUREOFFSET |
| #define SISVID SISUSB_PCI_IOPORTBASE + VIDEOOFFSET |
| #define SISCOLIDXR SISUSB_PCI_IOPORTBASE + COLREGOFFSET - 1 |
| #define SISCOLIDX SISUSB_PCI_IOPORTBASE + COLREGOFFSET |
| #define SISCOLDATA SISUSB_PCI_IOPORTBASE + COLREGOFFSET + 1 |
| #define SISCOL2IDX SISPART5 |
| #define SISCOL2DATA SISPART5 + 1 |
| #define SISPEL SISUSB_PCI_IOPORTBASE + PELMASKOFFSET |
| #define SISVGAEN SISUSB_PCI_IOPORTBASE + VGAENABLE |
| #define SISDACA SISCOLIDX |
| #define SISDACD SISCOLDATA |
| |
| /* ioctl related */ |
| |
| /* Structure argument for SISUSB_GET_INFO ioctl */ |
| struct sisusb_info { |
| __u32 sisusb_id; /* for identifying sisusb */ |
| #define SISUSB_ID 0x53495355 /* Identify myself with 'SISU' */ |
| __u8 sisusb_version; |
| __u8 sisusb_revision; |
| __u8 sisusb_patchlevel; |
| __u8 sisusb_gfxinit; /* graphics core initialized? */ |
| |
| __u32 sisusb_vrambase; |
| __u32 sisusb_mmiobase; |
| __u32 sisusb_iobase; |
| __u32 sisusb_pcibase; |
| |
| __u32 sisusb_vramsize; /* framebuffer size in bytes */ |
| |
| __u32 sisusb_minor; |
| |
| __u32 sisusb_fbdevactive; /* != 0 if framebuffer device active */ |
| |
| __u8 sisusb_reserved[32]; /* for future use */ |
| }; |
| |
| struct sisusb_command { |
| __u8 operation; /* see below */ |
| __u8 data0; /* operation dependent */ |
| __u8 data1; /* operation dependent */ |
| __u8 data2; /* operation dependent */ |
| __u32 data3; /* operation dependent */ |
| __u32 data4; /* for future use */ |
| }; |
| |
| #define SUCMD_GET 0x01 /* for all: data0 = index, data3 = port */ |
| #define SUCMD_SET 0x02 /* data1 = value */ |
| #define SUCMD_SETOR 0x03 /* data1 = or */ |
| #define SUCMD_SETAND 0x04 /* data1 = and */ |
| #define SUCMD_SETANDOR 0x05 /* data1 = and, data2 = or */ |
| #define SUCMD_SETMASK 0x06 /* data1 = data, data2 = mask */ |
| |
| #define SUCMD_CLRSCR 0x07 /* data0:1:2 = length, data3 = address */ |
| |
| #define SISUSB_COMMAND _IOWR(0xF3,0x3D,struct sisusb_command) |
| #define SISUSB_GET_CONFIG_SIZE _IOR(0xF3,0x3E,__u32) |
| #define SISUSB_GET_CONFIG _IOR(0xF3,0x3F,struct sisusb_info) |
| |
| #endif /* SISUSB_H */ |
| |