|  | /* | 
|  | * INET		802.1Q VLAN | 
|  | *		Ethernet-type device handling. | 
|  | * | 
|  | * Authors:	Ben Greear <greearb@candelatech.com> | 
|  | *              Please send support related email to: vlan@scry.wanfear.com | 
|  | *              VLAN Home Page: http://www.candelatech.com/~greear/vlan.html | 
|  | * | 
|  | * Fixes: | 
|  | *              Fix for packet capture - Nick Eggleston <nick@dccinc.com>; | 
|  | *		Add HW acceleration hooks - David S. Miller <davem@redhat.com>; | 
|  | *		Correct all the locking - David S. Miller <davem@redhat.com>; | 
|  | *		Use hash table for VLAN groups - David S. Miller <davem@redhat.com> | 
|  | * | 
|  | *		This program is free software; you can redistribute it and/or | 
|  | *		modify it under the terms of the GNU General Public License | 
|  | *		as published by the Free Software Foundation; either version | 
|  | *		2 of the License, or (at your option) any later version. | 
|  | */ | 
|  |  | 
|  | #include <asm/uaccess.h> /* for copy_from_user */ | 
|  | #include <linux/module.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <net/datalink.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/in.h> | 
|  | #include <linux/init.h> | 
|  | #include <net/p8022.h> | 
|  | #include <net/arp.h> | 
|  | #include <linux/rtnetlink.h> | 
|  | #include <linux/notifier.h> | 
|  |  | 
|  | #include <linux/if_vlan.h> | 
|  | #include "vlan.h" | 
|  | #include "vlanproc.h" | 
|  |  | 
|  | #define DRV_VERSION "1.8" | 
|  |  | 
|  | /* Global VLAN variables */ | 
|  |  | 
|  | /* Our listing of VLAN group(s) */ | 
|  | static struct hlist_head vlan_group_hash[VLAN_GRP_HASH_SIZE]; | 
|  | #define vlan_grp_hashfn(IDX)	((((IDX) >> VLAN_GRP_HASH_SHIFT) ^ (IDX)) & VLAN_GRP_HASH_MASK) | 
|  |  | 
|  | static char vlan_fullname[] = "802.1Q VLAN Support"; | 
|  | static char vlan_version[] = DRV_VERSION; | 
|  | static char vlan_copyright[] = "Ben Greear <greearb@candelatech.com>"; | 
|  | static char vlan_buggyright[] = "David S. Miller <davem@redhat.com>"; | 
|  |  | 
|  | static int vlan_device_event(struct notifier_block *, unsigned long, void *); | 
|  | static int vlan_ioctl_handler(void __user *); | 
|  | static int unregister_vlan_dev(struct net_device *, unsigned short ); | 
|  |  | 
|  | static struct notifier_block vlan_notifier_block = { | 
|  | .notifier_call = vlan_device_event, | 
|  | }; | 
|  |  | 
|  | /* These may be changed at run-time through IOCTLs */ | 
|  |  | 
|  | /* Determines interface naming scheme. */ | 
|  | unsigned short vlan_name_type = VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD; | 
|  |  | 
|  | static struct packet_type vlan_packet_type = { | 
|  | .type = __constant_htons(ETH_P_8021Q), | 
|  | .func = vlan_skb_recv, /* VLAN receive method */ | 
|  | }; | 
|  |  | 
|  | /* Bits of netdev state that are propagated from real device to virtual */ | 
|  | #define VLAN_LINK_STATE_MASK \ | 
|  | ((1<<__LINK_STATE_PRESENT)|(1<<__LINK_STATE_NOCARRIER)) | 
|  |  | 
|  | /* End of global variables definitions. */ | 
|  |  | 
|  | /* | 
|  | * Function vlan_proto_init (pro) | 
|  | * | 
|  | *    Initialize VLAN protocol layer, | 
|  | * | 
|  | */ | 
|  | static int __init vlan_proto_init(void) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | printk(VLAN_INF "%s v%s %s\n", | 
|  | vlan_fullname, vlan_version, vlan_copyright); | 
|  | printk(VLAN_INF "All bugs added by %s\n", | 
|  | vlan_buggyright); | 
|  |  | 
|  | /* proc file system initialization */ | 
|  | err = vlan_proc_init(); | 
|  | if (err < 0) { | 
|  | printk(KERN_ERR | 
|  | "%s %s: can't create entry in proc filesystem!\n", | 
|  | __FUNCTION__, VLAN_NAME); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | dev_add_pack(&vlan_packet_type); | 
|  |  | 
|  | /* Register us to receive netdevice events */ | 
|  | err = register_netdevice_notifier(&vlan_notifier_block); | 
|  | if (err < 0) { | 
|  | dev_remove_pack(&vlan_packet_type); | 
|  | vlan_proc_cleanup(); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | vlan_ioctl_set(vlan_ioctl_handler); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Cleanup all vlan devices | 
|  | * Note: devices that have been registered that but not | 
|  | * brought up will exist but have no module ref count. | 
|  | */ | 
|  | static void __exit vlan_cleanup_devices(void) | 
|  | { | 
|  | struct net_device *dev, *nxt; | 
|  |  | 
|  | rtnl_lock(); | 
|  | for (dev = dev_base; dev; dev = nxt) { | 
|  | nxt = dev->next; | 
|  | if (dev->priv_flags & IFF_802_1Q_VLAN) { | 
|  | unregister_vlan_dev(VLAN_DEV_INFO(dev)->real_dev, | 
|  | VLAN_DEV_INFO(dev)->vlan_id); | 
|  |  | 
|  | unregister_netdevice(dev); | 
|  | } | 
|  | } | 
|  | rtnl_unlock(); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *     Module 'remove' entry point. | 
|  | *     o delete /proc/net/router directory and static entries. | 
|  | */ | 
|  | static void __exit vlan_cleanup_module(void) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | vlan_ioctl_set(NULL); | 
|  |  | 
|  | /* Un-register us from receiving netdevice events */ | 
|  | unregister_netdevice_notifier(&vlan_notifier_block); | 
|  |  | 
|  | dev_remove_pack(&vlan_packet_type); | 
|  | vlan_cleanup_devices(); | 
|  |  | 
|  | /* This table must be empty if there are no module | 
|  | * references left. | 
|  | */ | 
|  | for (i = 0; i < VLAN_GRP_HASH_SIZE; i++) { | 
|  | BUG_ON(!hlist_empty(&vlan_group_hash[i])); | 
|  | } | 
|  | vlan_proc_cleanup(); | 
|  |  | 
|  | synchronize_net(); | 
|  | } | 
|  |  | 
|  | module_init(vlan_proto_init); | 
|  | module_exit(vlan_cleanup_module); | 
|  |  | 
|  | /* Must be invoked with RCU read lock (no preempt) */ | 
|  | static struct vlan_group *__vlan_find_group(int real_dev_ifindex) | 
|  | { | 
|  | struct vlan_group *grp; | 
|  | struct hlist_node *n; | 
|  | int hash = vlan_grp_hashfn(real_dev_ifindex); | 
|  |  | 
|  | hlist_for_each_entry_rcu(grp, n, &vlan_group_hash[hash], hlist) { | 
|  | if (grp->real_dev_ifindex == real_dev_ifindex) | 
|  | return grp; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /*  Find the protocol handler.  Assumes VID < VLAN_VID_MASK. | 
|  | * | 
|  | * Must be invoked with RCU read lock (no preempt) | 
|  | */ | 
|  | struct net_device *__find_vlan_dev(struct net_device *real_dev, | 
|  | unsigned short VID) | 
|  | { | 
|  | struct vlan_group *grp = __vlan_find_group(real_dev->ifindex); | 
|  |  | 
|  | if (grp) | 
|  | return grp->vlan_devices[VID]; | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static void vlan_rcu_free(struct rcu_head *rcu) | 
|  | { | 
|  | kfree(container_of(rcu, struct vlan_group, rcu)); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* This returns 0 if everything went fine. | 
|  | * It will return 1 if the group was killed as a result. | 
|  | * A negative return indicates failure. | 
|  | * | 
|  | * The RTNL lock must be held. | 
|  | */ | 
|  | static int unregister_vlan_dev(struct net_device *real_dev, | 
|  | unsigned short vlan_id) | 
|  | { | 
|  | struct net_device *dev = NULL; | 
|  | int real_dev_ifindex = real_dev->ifindex; | 
|  | struct vlan_group *grp; | 
|  | int i, ret; | 
|  |  | 
|  | #ifdef VLAN_DEBUG | 
|  | printk(VLAN_DBG "%s: VID: %i\n", __FUNCTION__, vlan_id); | 
|  | #endif | 
|  |  | 
|  | /* sanity check */ | 
|  | if (vlan_id >= VLAN_VID_MASK) | 
|  | return -EINVAL; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  | grp = __vlan_find_group(real_dev_ifindex); | 
|  |  | 
|  | ret = 0; | 
|  |  | 
|  | if (grp) { | 
|  | dev = grp->vlan_devices[vlan_id]; | 
|  | if (dev) { | 
|  | /* Remove proc entry */ | 
|  | vlan_proc_rem_dev(dev); | 
|  |  | 
|  | /* Take it out of our own structures, but be sure to | 
|  | * interlock with HW accelerating devices or SW vlan | 
|  | * input packet processing. | 
|  | */ | 
|  | if (real_dev->features & | 
|  | (NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER)) { | 
|  | real_dev->vlan_rx_kill_vid(real_dev, vlan_id); | 
|  | } | 
|  |  | 
|  | grp->vlan_devices[vlan_id] = NULL; | 
|  | synchronize_net(); | 
|  |  | 
|  |  | 
|  | /* Caller unregisters (and if necessary, puts) | 
|  | * VLAN device, but we get rid of the reference to | 
|  | * real_dev here. | 
|  | */ | 
|  | dev_put(real_dev); | 
|  |  | 
|  | /* If the group is now empty, kill off the | 
|  | * group. | 
|  | */ | 
|  | for (i = 0; i < VLAN_VID_MASK; i++) | 
|  | if (grp->vlan_devices[i]) | 
|  | break; | 
|  |  | 
|  | if (i == VLAN_VID_MASK) { | 
|  | if (real_dev->features & NETIF_F_HW_VLAN_RX) | 
|  | real_dev->vlan_rx_register(real_dev, NULL); | 
|  |  | 
|  | hlist_del_rcu(&grp->hlist); | 
|  |  | 
|  | /* Free the group, after all cpu's are done. */ | 
|  | call_rcu(&grp->rcu, vlan_rcu_free); | 
|  |  | 
|  | grp = NULL; | 
|  | ret = 1; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int unregister_vlan_device(const char *vlan_IF_name) | 
|  | { | 
|  | struct net_device *dev = NULL; | 
|  | int ret; | 
|  |  | 
|  |  | 
|  | dev = dev_get_by_name(vlan_IF_name); | 
|  | ret = -EINVAL; | 
|  | if (dev) { | 
|  | if (dev->priv_flags & IFF_802_1Q_VLAN) { | 
|  | rtnl_lock(); | 
|  |  | 
|  | ret = unregister_vlan_dev(VLAN_DEV_INFO(dev)->real_dev, | 
|  | VLAN_DEV_INFO(dev)->vlan_id); | 
|  |  | 
|  | dev_put(dev); | 
|  | unregister_netdevice(dev); | 
|  |  | 
|  | rtnl_unlock(); | 
|  |  | 
|  | if (ret == 1) | 
|  | ret = 0; | 
|  | } else { | 
|  | printk(VLAN_ERR | 
|  | "%s: ERROR:	Tried to remove a non-vlan device " | 
|  | "with VLAN code, name: %s  priv_flags: %hX\n", | 
|  | __FUNCTION__, dev->name, dev->priv_flags); | 
|  | dev_put(dev); | 
|  | ret = -EPERM; | 
|  | } | 
|  | } else { | 
|  | #ifdef VLAN_DEBUG | 
|  | printk(VLAN_DBG "%s: WARNING: Could not find dev.\n", __FUNCTION__); | 
|  | #endif | 
|  | ret = -EINVAL; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void vlan_setup(struct net_device *new_dev) | 
|  | { | 
|  | SET_MODULE_OWNER(new_dev); | 
|  |  | 
|  | /* new_dev->ifindex = 0;  it will be set when added to | 
|  | * the global list. | 
|  | * iflink is set as well. | 
|  | */ | 
|  | new_dev->get_stats = vlan_dev_get_stats; | 
|  |  | 
|  | /* Make this thing known as a VLAN device */ | 
|  | new_dev->priv_flags |= IFF_802_1Q_VLAN; | 
|  |  | 
|  | /* Set us up to have no queue, as the underlying Hardware device | 
|  | * can do all the queueing we could want. | 
|  | */ | 
|  | new_dev->tx_queue_len = 0; | 
|  |  | 
|  | /* set up method calls */ | 
|  | new_dev->change_mtu = vlan_dev_change_mtu; | 
|  | new_dev->open = vlan_dev_open; | 
|  | new_dev->stop = vlan_dev_stop; | 
|  | new_dev->set_mac_address = vlan_dev_set_mac_address; | 
|  | new_dev->set_multicast_list = vlan_dev_set_multicast_list; | 
|  | new_dev->destructor = free_netdev; | 
|  | new_dev->do_ioctl = vlan_dev_ioctl; | 
|  | } | 
|  |  | 
|  | /*  Attach a VLAN device to a mac address (ie Ethernet Card). | 
|  | *  Returns the device that was created, or NULL if there was | 
|  | *  an error of some kind. | 
|  | */ | 
|  | static struct net_device *register_vlan_device(const char *eth_IF_name, | 
|  | unsigned short VLAN_ID) | 
|  | { | 
|  | struct vlan_group *grp; | 
|  | struct net_device *new_dev; | 
|  | struct net_device *real_dev; /* the ethernet device */ | 
|  | char name[IFNAMSIZ]; | 
|  |  | 
|  | #ifdef VLAN_DEBUG | 
|  | printk(VLAN_DBG "%s: if_name -:%s:-	vid: %i\n", | 
|  | __FUNCTION__, eth_IF_name, VLAN_ID); | 
|  | #endif | 
|  |  | 
|  | if (VLAN_ID >= VLAN_VID_MASK) | 
|  | goto out_ret_null; | 
|  |  | 
|  | /* find the device relating to eth_IF_name. */ | 
|  | real_dev = dev_get_by_name(eth_IF_name); | 
|  | if (!real_dev) | 
|  | goto out_ret_null; | 
|  |  | 
|  | if (real_dev->features & NETIF_F_VLAN_CHALLENGED) { | 
|  | printk(VLAN_DBG "%s: VLANs not supported on %s.\n", | 
|  | __FUNCTION__, real_dev->name); | 
|  | goto out_put_dev; | 
|  | } | 
|  |  | 
|  | if ((real_dev->features & NETIF_F_HW_VLAN_RX) && | 
|  | (real_dev->vlan_rx_register == NULL || | 
|  | real_dev->vlan_rx_kill_vid == NULL)) { | 
|  | printk(VLAN_DBG "%s: Device %s has buggy VLAN hw accel.\n", | 
|  | __FUNCTION__, real_dev->name); | 
|  | goto out_put_dev; | 
|  | } | 
|  |  | 
|  | if ((real_dev->features & NETIF_F_HW_VLAN_FILTER) && | 
|  | (real_dev->vlan_rx_add_vid == NULL || | 
|  | real_dev->vlan_rx_kill_vid == NULL)) { | 
|  | printk(VLAN_DBG "%s: Device %s has buggy VLAN hw accel.\n", | 
|  | __FUNCTION__, real_dev->name); | 
|  | goto out_put_dev; | 
|  | } | 
|  |  | 
|  | /* From this point on, all the data structures must remain | 
|  | * consistent. | 
|  | */ | 
|  | rtnl_lock(); | 
|  |  | 
|  | /* The real device must be up and operating in order to | 
|  | * assosciate a VLAN device with it. | 
|  | */ | 
|  | if (!(real_dev->flags & IFF_UP)) | 
|  | goto out_unlock; | 
|  |  | 
|  | if (__find_vlan_dev(real_dev, VLAN_ID) != NULL) { | 
|  | /* was already registered. */ | 
|  | printk(VLAN_DBG "%s: ALREADY had VLAN registered\n", __FUNCTION__); | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | /* Gotta set up the fields for the device. */ | 
|  | #ifdef VLAN_DEBUG | 
|  | printk(VLAN_DBG "About to allocate name, vlan_name_type: %i\n", | 
|  | vlan_name_type); | 
|  | #endif | 
|  | switch (vlan_name_type) { | 
|  | case VLAN_NAME_TYPE_RAW_PLUS_VID: | 
|  | /* name will look like:	 eth1.0005 */ | 
|  | snprintf(name, IFNAMSIZ, "%s.%.4i", real_dev->name, VLAN_ID); | 
|  | break; | 
|  | case VLAN_NAME_TYPE_PLUS_VID_NO_PAD: | 
|  | /* Put our vlan.VID in the name. | 
|  | * Name will look like:	 vlan5 | 
|  | */ | 
|  | snprintf(name, IFNAMSIZ, "vlan%i", VLAN_ID); | 
|  | break; | 
|  | case VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD: | 
|  | /* Put our vlan.VID in the name. | 
|  | * Name will look like:	 eth0.5 | 
|  | */ | 
|  | snprintf(name, IFNAMSIZ, "%s.%i", real_dev->name, VLAN_ID); | 
|  | break; | 
|  | case VLAN_NAME_TYPE_PLUS_VID: | 
|  | /* Put our vlan.VID in the name. | 
|  | * Name will look like:	 vlan0005 | 
|  | */ | 
|  | default: | 
|  | snprintf(name, IFNAMSIZ, "vlan%.4i", VLAN_ID); | 
|  | }; | 
|  |  | 
|  | new_dev = alloc_netdev(sizeof(struct vlan_dev_info), name, | 
|  | vlan_setup); | 
|  | if (new_dev == NULL) | 
|  | goto out_unlock; | 
|  |  | 
|  | #ifdef VLAN_DEBUG | 
|  | printk(VLAN_DBG "Allocated new name -:%s:-\n", new_dev->name); | 
|  | #endif | 
|  | /* IFF_BROADCAST|IFF_MULTICAST; ??? */ | 
|  | new_dev->flags = real_dev->flags; | 
|  | new_dev->flags &= ~IFF_UP; | 
|  |  | 
|  | new_dev->state = real_dev->state & VLAN_LINK_STATE_MASK; | 
|  |  | 
|  | /* need 4 bytes for extra VLAN header info, | 
|  | * hope the underlying device can handle it. | 
|  | */ | 
|  | new_dev->mtu = real_dev->mtu; | 
|  |  | 
|  | /* TODO: maybe just assign it to be ETHERNET? */ | 
|  | new_dev->type = real_dev->type; | 
|  |  | 
|  | new_dev->hard_header_len = real_dev->hard_header_len; | 
|  | if (!(real_dev->features & NETIF_F_HW_VLAN_TX)) { | 
|  | /* Regular ethernet + 4 bytes (18 total). */ | 
|  | new_dev->hard_header_len += VLAN_HLEN; | 
|  | } | 
|  |  | 
|  | VLAN_MEM_DBG("new_dev->priv malloc, addr: %p  size: %i\n", | 
|  | new_dev->priv, | 
|  | sizeof(struct vlan_dev_info)); | 
|  |  | 
|  | memcpy(new_dev->broadcast, real_dev->broadcast, real_dev->addr_len); | 
|  | memcpy(new_dev->dev_addr, real_dev->dev_addr, real_dev->addr_len); | 
|  | new_dev->addr_len = real_dev->addr_len; | 
|  |  | 
|  | if (real_dev->features & NETIF_F_HW_VLAN_TX) { | 
|  | new_dev->hard_header = real_dev->hard_header; | 
|  | new_dev->hard_start_xmit = vlan_dev_hwaccel_hard_start_xmit; | 
|  | new_dev->rebuild_header = real_dev->rebuild_header; | 
|  | } else { | 
|  | new_dev->hard_header = vlan_dev_hard_header; | 
|  | new_dev->hard_start_xmit = vlan_dev_hard_start_xmit; | 
|  | new_dev->rebuild_header = vlan_dev_rebuild_header; | 
|  | } | 
|  | new_dev->hard_header_parse = real_dev->hard_header_parse; | 
|  |  | 
|  | VLAN_DEV_INFO(new_dev)->vlan_id = VLAN_ID; /* 1 through VLAN_VID_MASK */ | 
|  | VLAN_DEV_INFO(new_dev)->real_dev = real_dev; | 
|  | VLAN_DEV_INFO(new_dev)->dent = NULL; | 
|  | VLAN_DEV_INFO(new_dev)->flags = 1; | 
|  |  | 
|  | #ifdef VLAN_DEBUG | 
|  | printk(VLAN_DBG "About to go find the group for idx: %i\n", | 
|  | real_dev->ifindex); | 
|  | #endif | 
|  |  | 
|  | if (register_netdevice(new_dev)) | 
|  | goto out_free_newdev; | 
|  |  | 
|  | /* So, got the sucker initialized, now lets place | 
|  | * it into our local structure. | 
|  | */ | 
|  | grp = __vlan_find_group(real_dev->ifindex); | 
|  |  | 
|  | /* Note, we are running under the RTNL semaphore | 
|  | * so it cannot "appear" on us. | 
|  | */ | 
|  | if (!grp) { /* need to add a new group */ | 
|  | grp = kmalloc(sizeof(struct vlan_group), GFP_KERNEL); | 
|  | if (!grp) | 
|  | goto out_free_unregister; | 
|  |  | 
|  | /* printk(KERN_ALERT "VLAN REGISTER:  Allocated new group.\n"); */ | 
|  | memset(grp, 0, sizeof(struct vlan_group)); | 
|  | grp->real_dev_ifindex = real_dev->ifindex; | 
|  |  | 
|  | hlist_add_head_rcu(&grp->hlist, | 
|  | &vlan_group_hash[vlan_grp_hashfn(real_dev->ifindex)]); | 
|  |  | 
|  | if (real_dev->features & NETIF_F_HW_VLAN_RX) | 
|  | real_dev->vlan_rx_register(real_dev, grp); | 
|  | } | 
|  |  | 
|  | grp->vlan_devices[VLAN_ID] = new_dev; | 
|  |  | 
|  | if (vlan_proc_add_dev(new_dev)<0)/* create it's proc entry */ | 
|  | printk(KERN_WARNING "VLAN: failed to add proc entry for %s\n", | 
|  | new_dev->name); | 
|  |  | 
|  | if (real_dev->features & NETIF_F_HW_VLAN_FILTER) | 
|  | real_dev->vlan_rx_add_vid(real_dev, VLAN_ID); | 
|  |  | 
|  | rtnl_unlock(); | 
|  |  | 
|  |  | 
|  | #ifdef VLAN_DEBUG | 
|  | printk(VLAN_DBG "Allocated new device successfully, returning.\n"); | 
|  | #endif | 
|  | return new_dev; | 
|  |  | 
|  | out_free_unregister: | 
|  | unregister_netdev(new_dev); | 
|  | goto out_unlock; | 
|  |  | 
|  | out_free_newdev: | 
|  | free_netdev(new_dev); | 
|  |  | 
|  | out_unlock: | 
|  | rtnl_unlock(); | 
|  |  | 
|  | out_put_dev: | 
|  | dev_put(real_dev); | 
|  |  | 
|  | out_ret_null: | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static int vlan_device_event(struct notifier_block *unused, unsigned long event, void *ptr) | 
|  | { | 
|  | struct net_device *dev = ptr; | 
|  | struct vlan_group *grp = __vlan_find_group(dev->ifindex); | 
|  | int i, flgs; | 
|  | struct net_device *vlandev; | 
|  |  | 
|  | if (!grp) | 
|  | goto out; | 
|  |  | 
|  | /* It is OK that we do not hold the group lock right now, | 
|  | * as we run under the RTNL lock. | 
|  | */ | 
|  |  | 
|  | switch (event) { | 
|  | case NETDEV_CHANGE: | 
|  | /* Propagate real device state to vlan devices */ | 
|  | flgs = dev->state & VLAN_LINK_STATE_MASK; | 
|  | for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) { | 
|  | vlandev = grp->vlan_devices[i]; | 
|  | if (!vlandev) | 
|  | continue; | 
|  |  | 
|  | if (netif_carrier_ok(dev)) { | 
|  | if (!netif_carrier_ok(vlandev)) | 
|  | netif_carrier_on(vlandev); | 
|  | } else { | 
|  | if (netif_carrier_ok(vlandev)) | 
|  | netif_carrier_off(vlandev); | 
|  | } | 
|  |  | 
|  | if ((vlandev->state & VLAN_LINK_STATE_MASK) != flgs) { | 
|  | vlandev->state = (vlandev->state &~ VLAN_LINK_STATE_MASK) | 
|  | | flgs; | 
|  | netdev_state_change(vlandev); | 
|  | } | 
|  | } | 
|  | break; | 
|  |  | 
|  | case NETDEV_DOWN: | 
|  | /* Put all VLANs for this dev in the down state too.  */ | 
|  | for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) { | 
|  | vlandev = grp->vlan_devices[i]; | 
|  | if (!vlandev) | 
|  | continue; | 
|  |  | 
|  | flgs = vlandev->flags; | 
|  | if (!(flgs & IFF_UP)) | 
|  | continue; | 
|  |  | 
|  | dev_change_flags(vlandev, flgs & ~IFF_UP); | 
|  | } | 
|  | break; | 
|  |  | 
|  | case NETDEV_UP: | 
|  | /* Put all VLANs for this dev in the up state too.  */ | 
|  | for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) { | 
|  | vlandev = grp->vlan_devices[i]; | 
|  | if (!vlandev) | 
|  | continue; | 
|  |  | 
|  | flgs = vlandev->flags; | 
|  | if (flgs & IFF_UP) | 
|  | continue; | 
|  |  | 
|  | dev_change_flags(vlandev, flgs | IFF_UP); | 
|  | } | 
|  | break; | 
|  |  | 
|  | case NETDEV_UNREGISTER: | 
|  | /* Delete all VLANs for this dev. */ | 
|  | for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) { | 
|  | int ret; | 
|  |  | 
|  | vlandev = grp->vlan_devices[i]; | 
|  | if (!vlandev) | 
|  | continue; | 
|  |  | 
|  | ret = unregister_vlan_dev(dev, | 
|  | VLAN_DEV_INFO(vlandev)->vlan_id); | 
|  |  | 
|  | unregister_netdevice(vlandev); | 
|  |  | 
|  | /* Group was destroyed? */ | 
|  | if (ret == 1) | 
|  | break; | 
|  | } | 
|  | break; | 
|  | }; | 
|  |  | 
|  | out: | 
|  | return NOTIFY_DONE; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *	VLAN IOCTL handler. | 
|  | *	o execute requested action or pass command to the device driver | 
|  | *   arg is really a struct vlan_ioctl_args __user *. | 
|  | */ | 
|  | static int vlan_ioctl_handler(void __user *arg) | 
|  | { | 
|  | int err = 0; | 
|  | unsigned short vid = 0; | 
|  | struct vlan_ioctl_args args; | 
|  |  | 
|  | if (copy_from_user(&args, arg, sizeof(struct vlan_ioctl_args))) | 
|  | return -EFAULT; | 
|  |  | 
|  | /* Null terminate this sucker, just in case. */ | 
|  | args.device1[23] = 0; | 
|  | args.u.device2[23] = 0; | 
|  |  | 
|  | #ifdef VLAN_DEBUG | 
|  | printk(VLAN_DBG "%s: args.cmd: %x\n", __FUNCTION__, args.cmd); | 
|  | #endif | 
|  |  | 
|  | switch (args.cmd) { | 
|  | case SET_VLAN_INGRESS_PRIORITY_CMD: | 
|  | if (!capable(CAP_NET_ADMIN)) | 
|  | return -EPERM; | 
|  | err = vlan_dev_set_ingress_priority(args.device1, | 
|  | args.u.skb_priority, | 
|  | args.vlan_qos); | 
|  | break; | 
|  |  | 
|  | case SET_VLAN_EGRESS_PRIORITY_CMD: | 
|  | if (!capable(CAP_NET_ADMIN)) | 
|  | return -EPERM; | 
|  | err = vlan_dev_set_egress_priority(args.device1, | 
|  | args.u.skb_priority, | 
|  | args.vlan_qos); | 
|  | break; | 
|  |  | 
|  | case SET_VLAN_FLAG_CMD: | 
|  | if (!capable(CAP_NET_ADMIN)) | 
|  | return -EPERM; | 
|  | err = vlan_dev_set_vlan_flag(args.device1, | 
|  | args.u.flag, | 
|  | args.vlan_qos); | 
|  | break; | 
|  |  | 
|  | case SET_VLAN_NAME_TYPE_CMD: | 
|  | if (!capable(CAP_NET_ADMIN)) | 
|  | return -EPERM; | 
|  | if ((args.u.name_type >= 0) && | 
|  | (args.u.name_type < VLAN_NAME_TYPE_HIGHEST)) { | 
|  | vlan_name_type = args.u.name_type; | 
|  | err = 0; | 
|  | } else { | 
|  | err = -EINVAL; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case ADD_VLAN_CMD: | 
|  | if (!capable(CAP_NET_ADMIN)) | 
|  | return -EPERM; | 
|  | /* we have been given the name of the Ethernet Device we want to | 
|  | * talk to:  args.dev1	 We also have the | 
|  | * VLAN ID:  args.u.VID | 
|  | */ | 
|  | if (register_vlan_device(args.device1, args.u.VID)) { | 
|  | err = 0; | 
|  | } else { | 
|  | err = -EINVAL; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case DEL_VLAN_CMD: | 
|  | if (!capable(CAP_NET_ADMIN)) | 
|  | return -EPERM; | 
|  | /* Here, the args.dev1 is the actual VLAN we want | 
|  | * to get rid of. | 
|  | */ | 
|  | err = unregister_vlan_device(args.device1); | 
|  | break; | 
|  |  | 
|  | case GET_VLAN_INGRESS_PRIORITY_CMD: | 
|  | /* TODO:  Implement | 
|  | err = vlan_dev_get_ingress_priority(args); | 
|  | if (copy_to_user((void*)arg, &args, | 
|  | sizeof(struct vlan_ioctl_args))) { | 
|  | err = -EFAULT; | 
|  | } | 
|  | */ | 
|  | err = -EINVAL; | 
|  | break; | 
|  | case GET_VLAN_EGRESS_PRIORITY_CMD: | 
|  | /* TODO:  Implement | 
|  | err = vlan_dev_get_egress_priority(args.device1, &(args.args); | 
|  | if (copy_to_user((void*)arg, &args, | 
|  | sizeof(struct vlan_ioctl_args))) { | 
|  | err = -EFAULT; | 
|  | } | 
|  | */ | 
|  | err = -EINVAL; | 
|  | break; | 
|  | case GET_VLAN_REALDEV_NAME_CMD: | 
|  | err = vlan_dev_get_realdev_name(args.device1, args.u.device2); | 
|  | if (copy_to_user(arg, &args, | 
|  | sizeof(struct vlan_ioctl_args))) { | 
|  | err = -EFAULT; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case GET_VLAN_VID_CMD: | 
|  | err = vlan_dev_get_vid(args.device1, &vid); | 
|  | args.u.VID = vid; | 
|  | if (copy_to_user(arg, &args, | 
|  | sizeof(struct vlan_ioctl_args))) { | 
|  | err = -EFAULT; | 
|  | } | 
|  | break; | 
|  |  | 
|  | default: | 
|  | /* pass on to underlying device instead?? */ | 
|  | printk(VLAN_DBG "%s: Unknown VLAN CMD: %x \n", | 
|  | __FUNCTION__, args.cmd); | 
|  | return -EINVAL; | 
|  | }; | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_VERSION(DRV_VERSION); |