[PATCH] powerpc: merge the rest of arch/ppc*/oprofile
- merge common.c
- move model specific files
- remove stub Makefiles
- clean up arch/ppc*/Makefile
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
diff --git a/arch/powerpc/oprofile/common.c b/arch/powerpc/oprofile/common.c
new file mode 100644
index 0000000..486314a
--- /dev/null
+++ b/arch/powerpc/oprofile/common.c
@@ -0,0 +1,214 @@
+/*
+ * PPC 64 oprofile support:
+ * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
+ * PPC 32 oprofile support: (based on PPC 64 support)
+ * Copyright (C) Freescale Semiconductor, Inc 2004
+ * Author: Andy Fleming
+ *
+ * Based on alpha version.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/oprofile.h>
+#ifndef __powerpc64__
+#include <linux/slab.h>
+#endif /* ! __powerpc64__ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/errno.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#ifdef __powerpc64__
+#include <asm/pmc.h>
+#else /* __powerpc64__ */
+#include <asm/perfmon.h>
+#endif /* __powerpc64__ */
+#include <asm/cputable.h>
+#include <asm/oprofile_impl.h>
+
+static struct op_powerpc_model *model;
+
+static struct op_counter_config ctr[OP_MAX_COUNTER];
+static struct op_system_config sys;
+
+#ifndef __powerpc64__
+static char *cpu_type;
+#endif /* ! __powerpc64__ */
+
+static void op_handle_interrupt(struct pt_regs *regs)
+{
+ model->handle_interrupt(regs, ctr);
+}
+
+static int op_powerpc_setup(void)
+{
+#ifdef __powerpc64__
+ int err;
+
+ /* Grab the hardware */
+ err = reserve_pmc_hardware(op_handle_interrupt);
+ if (err)
+ return err;
+#else /* __powerpc64__ */
+ /* Install our interrupt handler into the existing hook. */
+ if (request_perfmon_irq(&op_handle_interrupt))
+ return -EBUSY;
+ mb();
+#endif /* __powerpc64__ */
+
+ /* Pre-compute the values to stuff in the hardware registers. */
+ model->reg_setup(ctr, &sys, model->num_counters);
+
+ /* Configure the registers on all cpus. */
+#ifdef __powerpc64__
+ on_each_cpu(model->cpu_setup, NULL, 0, 1);
+#else /* __powerpc64__ */
+#if 0
+ /* FIXME: Make multi-cpu work */
+ on_each_cpu(model->reg_setup, NULL, 0, 1);
+#endif
+#endif /* __powerpc64__ */
+
+ return 0;
+}
+
+static void op_powerpc_shutdown(void)
+{
+#ifdef __powerpc64__
+ release_pmc_hardware();
+#else /* __powerpc64__ */
+ mb();
+ /* Remove our interrupt handler. We may be removing this module. */
+ free_perfmon_irq();
+#endif /* __powerpc64__ */
+}
+
+static void op_powerpc_cpu_start(void *dummy)
+{
+ model->start(ctr);
+}
+
+static int op_powerpc_start(void)
+{
+ on_each_cpu(op_powerpc_cpu_start, NULL, 0, 1);
+ return 0;
+}
+
+static inline void op_powerpc_cpu_stop(void *dummy)
+{
+ model->stop();
+}
+
+static void op_powerpc_stop(void)
+{
+ on_each_cpu(op_powerpc_cpu_stop, NULL, 0, 1);
+}
+
+static int op_powerpc_create_files(struct super_block *sb, struct dentry *root)
+{
+ int i;
+
+#ifdef __powerpc64__
+ /*
+ * There is one mmcr0, mmcr1 and mmcra for setting the events for
+ * all of the counters.
+ */
+ oprofilefs_create_ulong(sb, root, "mmcr0", &sys.mmcr0);
+ oprofilefs_create_ulong(sb, root, "mmcr1", &sys.mmcr1);
+ oprofilefs_create_ulong(sb, root, "mmcra", &sys.mmcra);
+#endif /* __powerpc64__ */
+
+ for (i = 0; i < model->num_counters; ++i) {
+ struct dentry *dir;
+ char buf[3];
+
+ snprintf(buf, sizeof buf, "%d", i);
+ dir = oprofilefs_mkdir(sb, root, buf);
+
+ oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
+ oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
+ oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
+#ifdef __powerpc64__
+ /*
+ * We dont support per counter user/kernel selection, but
+ * we leave the entries because userspace expects them
+ */
+#endif /* __powerpc64__ */
+ oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
+ oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
+
+#ifndef __powerpc64__
+ /* FIXME: Not sure if this is used */
+#endif /* ! __powerpc64__ */
+ oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask);
+ }
+
+ oprofilefs_create_ulong(sb, root, "enable_kernel", &sys.enable_kernel);
+ oprofilefs_create_ulong(sb, root, "enable_user", &sys.enable_user);
+#ifdef __powerpc64__
+ oprofilefs_create_ulong(sb, root, "backtrace_spinlocks",
+ &sys.backtrace_spinlocks);
+#endif /* __powerpc64__ */
+
+ /* Default to tracing both kernel and user */
+ sys.enable_kernel = 1;
+ sys.enable_user = 1;
+#ifdef __powerpc64__
+ /* Turn on backtracing through spinlocks by default */
+ sys.backtrace_spinlocks = 1;
+#endif /* __powerpc64__ */
+
+ return 0;
+}
+
+int __init oprofile_arch_init(struct oprofile_operations *ops)
+{
+#ifndef __powerpc64__
+ int cpu_id = smp_processor_id();
+
+#ifdef CONFIG_FSL_BOOKE
+ model = &op_model_fsl_booke;
+#else
+ return -ENODEV;
+#endif
+
+ cpu_type = kmalloc(32, GFP_KERNEL);
+ if (NULL == cpu_type)
+ return -ENOMEM;
+
+ sprintf(cpu_type, "ppc/%s", cur_cpu_spec[cpu_id]->cpu_name);
+
+ model->num_counters = cur_cpu_spec[cpu_id]->num_pmcs;
+
+ ops->cpu_type = cpu_type;
+#else /* __powerpc64__ */
+ if (!cur_cpu_spec->oprofile_model || !cur_cpu_spec->oprofile_cpu_type)
+ return -ENODEV;
+ model = cur_cpu_spec->oprofile_model;
+ model->num_counters = cur_cpu_spec->num_pmcs;
+
+ ops->cpu_type = cur_cpu_spec->oprofile_cpu_type;
+#endif /* __powerpc64__ */
+ ops->create_files = op_powerpc_create_files;
+ ops->setup = op_powerpc_setup;
+ ops->shutdown = op_powerpc_shutdown;
+ ops->start = op_powerpc_start;
+ ops->stop = op_powerpc_stop;
+
+ printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
+ ops->cpu_type);
+
+ return 0;
+}
+
+void oprofile_arch_exit(void)
+{
+#ifndef __powerpc64__
+ kfree(cpu_type);
+ cpu_type = NULL;
+#endif /* ! __powerpc64__ */
+}
diff --git a/arch/ppc/oprofile/op_model_fsl_booke.c b/arch/powerpc/oprofile/op_model_fsl_booke.c
similarity index 100%
rename from arch/ppc/oprofile/op_model_fsl_booke.c
rename to arch/powerpc/oprofile/op_model_fsl_booke.c
diff --git a/arch/ppc64/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c
similarity index 100%
rename from arch/ppc64/oprofile/op_model_power4.c
rename to arch/powerpc/oprofile/op_model_power4.c
diff --git a/arch/ppc64/oprofile/op_model_rs64.c b/arch/powerpc/oprofile/op_model_rs64.c
similarity index 100%
rename from arch/ppc64/oprofile/op_model_rs64.c
rename to arch/powerpc/oprofile/op_model_rs64.c
diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile
index 16e2675..90c7502 100644
--- a/arch/ppc/Makefile
+++ b/arch/ppc/Makefile
@@ -71,7 +71,7 @@
drivers-$(CONFIG_4xx) += arch/ppc/4xx_io/
drivers-$(CONFIG_CPM2) += arch/ppc/8260_io/
-drivers-$(CONFIG_OPROFILE) += arch/ppc/oprofile/
+drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/
BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm
diff --git a/arch/ppc/oprofile/Makefile b/arch/ppc/oprofile/Makefile
deleted file mode 100644
index 4bf75b7..0000000
--- a/arch/ppc/oprofile/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-include arch/powerpc/oprofile/Makefile
diff --git a/arch/ppc/oprofile/common.c b/arch/ppc/oprofile/common.c
deleted file mode 100644
index f63bee2..0000000
--- a/arch/ppc/oprofile/common.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * PPC 32 oprofile support
- * Based on PPC64 oprofile support
- * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
- *
- * Copyright (C) Freescale Semiconductor, Inc 2004
- *
- * Author: Andy Fleming
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/oprofile.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <asm/ptrace.h>
-#include <asm/system.h>
-#include <asm/perfmon.h>
-#include <asm/cputable.h>
-#include <asm/oprofile_impl.h>
-
-static struct op_powerpc_model *model;
-
-static struct op_counter_config ctr[OP_MAX_COUNTER];
-static struct op_system_config sys;
-
-static void op_handle_interrupt(struct pt_regs *regs)
-{
- model->handle_interrupt(regs, ctr);
-}
-
-static int op_ppc32_setup(void)
-{
- /* Install our interrupt handler into the existing hook. */
- if(request_perfmon_irq(&op_handle_interrupt))
- return -EBUSY;
-
- mb();
-
- /* Pre-compute the values to stuff in the hardware registers. */
- model->reg_setup(ctr, &sys, model->num_counters);
-
-#if 0
- /* FIXME: Make multi-cpu work */
- /* Configure the registers on all cpus. */
- on_each_cpu(model->reg_setup, NULL, 0, 1);
-#endif
-
- return 0;
-}
-
-static void op_ppc32_shutdown(void)
-{
- mb();
-
- /* Remove our interrupt handler. We may be removing this module. */
- free_perfmon_irq();
-}
-
-static void op_ppc32_cpu_start(void *dummy)
-{
- model->start(ctr);
-}
-
-static int op_ppc32_start(void)
-{
- on_each_cpu(op_ppc32_cpu_start, NULL, 0, 1);
- return 0;
-}
-
-static inline void op_ppc32_cpu_stop(void *dummy)
-{
- model->stop();
-}
-
-static void op_ppc32_stop(void)
-{
- on_each_cpu(op_ppc32_cpu_stop, NULL, 0, 1);
-}
-
-static int op_ppc32_create_files(struct super_block *sb, struct dentry *root)
-{
- int i;
-
- for (i = 0; i < model->num_counters; ++i) {
- struct dentry *dir;
- char buf[3];
-
- snprintf(buf, sizeof buf, "%d", i);
- dir = oprofilefs_mkdir(sb, root, buf);
-
- oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
- oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
- oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
- oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
- oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
-
- /* FIXME: Not sure if this is used */
- oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask);
- }
-
- oprofilefs_create_ulong(sb, root, "enable_kernel", &sys.enable_kernel);
- oprofilefs_create_ulong(sb, root, "enable_user", &sys.enable_user);
-
- /* Default to tracing both kernel and user */
- sys.enable_kernel = 1;
- sys.enable_user = 1;
-
- return 0;
-}
-
-static struct oprofile_operations oprof_ppc32_ops = {
- .create_files = op_ppc32_create_files,
- .setup = op_ppc32_setup,
- .shutdown = op_ppc32_shutdown,
- .start = op_ppc32_start,
- .stop = op_ppc32_stop,
- .cpu_type = NULL /* To be filled in below. */
-};
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
- char *name;
- int cpu_id = smp_processor_id();
-
-#ifdef CONFIG_FSL_BOOKE
- model = &op_model_fsl_booke;
-#else
- return -ENODEV;
-#endif
-
- name = kmalloc(32, GFP_KERNEL);
-
- if (NULL == name)
- return -ENOMEM;
-
- sprintf(name, "ppc/%s", cur_cpu_spec[cpu_id]->cpu_name);
-
- oprof_ppc32_ops.cpu_type = name;
-
- model->num_counters = cur_cpu_spec[cpu_id]->num_pmcs;
-
- *ops = oprof_ppc32_ops;
-
- printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
- oprof_ppc32_ops.cpu_type);
-
- return 0;
-}
-
-void oprofile_arch_exit(void)
-{
- kfree(oprof_ppc32_ops.cpu_type);
- oprof_ppc32_ops.cpu_type = NULL;
-}
diff --git a/arch/ppc64/Makefile b/arch/ppc64/Makefile
index 17d2c1e..a887788 100644
--- a/arch/ppc64/Makefile
+++ b/arch/ppc64/Makefile
@@ -85,7 +85,7 @@
core-y += arch/ppc64/kernel/
core-y += arch/ppc64/mm/
core-$(CONFIG_XMON) += arch/ppc64/xmon/
-drivers-$(CONFIG_OPROFILE) += arch/ppc64/oprofile/
+drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/
boot := arch/ppc64/boot
diff --git a/arch/ppc64/oprofile/Makefile b/arch/ppc64/oprofile/Makefile
deleted file mode 100644
index 4bf75b7..0000000
--- a/arch/ppc64/oprofile/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-include arch/powerpc/oprofile/Makefile
diff --git a/arch/ppc64/oprofile/common.c b/arch/ppc64/oprofile/common.c
deleted file mode 100644
index ff9361a..0000000
--- a/arch/ppc64/oprofile/common.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
- *
- * Based on alpha version.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/oprofile.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <asm/ptrace.h>
-#include <asm/system.h>
-#include <asm/pmc.h>
-#include <asm/cputable.h>
-#include <asm/oprofile_impl.h>
-
-static struct op_powerpc_model *model;
-
-static struct op_counter_config ctr[OP_MAX_COUNTER];
-static struct op_system_config sys;
-
-static void op_handle_interrupt(struct pt_regs *regs)
-{
- model->handle_interrupt(regs, ctr);
-}
-
-static int op_ppc64_setup(void)
-{
- int err;
-
- /* Grab the hardware */
- err = reserve_pmc_hardware(op_handle_interrupt);
- if (err)
- return err;
-
- /* Pre-compute the values to stuff in the hardware registers. */
- model->reg_setup(ctr, &sys, model->num_counters);
-
- /* Configure the registers on all cpus. */
- on_each_cpu(model->cpu_setup, NULL, 0, 1);
-
- return 0;
-}
-
-static void op_ppc64_shutdown(void)
-{
- release_pmc_hardware();
-}
-
-static void op_ppc64_cpu_start(void *dummy)
-{
- model->start(ctr);
-}
-
-static int op_ppc64_start(void)
-{
- on_each_cpu(op_ppc64_cpu_start, NULL, 0, 1);
- return 0;
-}
-
-static inline void op_ppc64_cpu_stop(void *dummy)
-{
- model->stop();
-}
-
-static void op_ppc64_stop(void)
-{
- on_each_cpu(op_ppc64_cpu_stop, NULL, 0, 1);
-}
-
-static int op_ppc64_create_files(struct super_block *sb, struct dentry *root)
-{
- int i;
-
- /*
- * There is one mmcr0, mmcr1 and mmcra for setting the events for
- * all of the counters.
- */
- oprofilefs_create_ulong(sb, root, "mmcr0", &sys.mmcr0);
- oprofilefs_create_ulong(sb, root, "mmcr1", &sys.mmcr1);
- oprofilefs_create_ulong(sb, root, "mmcra", &sys.mmcra);
-
- for (i = 0; i < model->num_counters; ++i) {
- struct dentry *dir;
- char buf[3];
-
- snprintf(buf, sizeof buf, "%d", i);
- dir = oprofilefs_mkdir(sb, root, buf);
-
- oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
- oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
- oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
- /*
- * We dont support per counter user/kernel selection, but
- * we leave the entries because userspace expects them
- */
- oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
- oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
- oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask);
- }
-
- oprofilefs_create_ulong(sb, root, "enable_kernel", &sys.enable_kernel);
- oprofilefs_create_ulong(sb, root, "enable_user", &sys.enable_user);
- oprofilefs_create_ulong(sb, root, "backtrace_spinlocks",
- &sys.backtrace_spinlocks);
-
- /* Default to tracing both kernel and user */
- sys.enable_kernel = 1;
- sys.enable_user = 1;
-
- /* Turn on backtracing through spinlocks by default */
- sys.backtrace_spinlocks = 1;
-
- return 0;
-}
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
- if (!cur_cpu_spec->oprofile_model || !cur_cpu_spec->oprofile_cpu_type)
- return -ENODEV;
-
- model = cur_cpu_spec->oprofile_model;
- model->num_counters = cur_cpu_spec->num_pmcs;
-
- ops->cpu_type = cur_cpu_spec->oprofile_cpu_type;
- ops->create_files = op_ppc64_create_files;
- ops->setup = op_ppc64_setup;
- ops->shutdown = op_ppc64_shutdown;
- ops->start = op_ppc64_start;
- ops->stop = op_ppc64_stop;
-
- printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
- ops->cpu_type);
-
- return 0;
-}
-
-void oprofile_arch_exit(void)
-{
-}