[NET]: Kill skb->list
Remove the "list" member of struct sk_buff, as it is entirely
redundant. All SKB list removal callers know which list the
SKB is on, so storing this in sk_buff does nothing other than
taking up some space.
Two tricky bits were SCTP, which I took care of, and two ATM
drivers which Francois Romieu <romieu@fr.zoreil.com> fixed
up.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
diff --git a/drivers/net/shaper.c b/drivers/net/shaper.c
index 3ad0b67..221354e 100644
--- a/drivers/net/shaper.c
+++ b/drivers/net/shaper.c
@@ -156,52 +156,6 @@
SHAPERCB(skb)->shapelen= shaper_clocks(shaper,skb);
-#ifdef SHAPER_COMPLEX /* and broken.. */
-
- while(ptr && ptr!=(struct sk_buff *)&shaper->sendq)
- {
- if(ptr->pri<skb->pri
- && jiffies - SHAPERCB(ptr)->shapeclock < SHAPER_MAXSLIP)
- {
- struct sk_buff *tmp=ptr->prev;
-
- /*
- * It goes before us therefore we slip the length
- * of the new frame.
- */
-
- SHAPERCB(ptr)->shapeclock+=SHAPERCB(skb)->shapelen;
- SHAPERCB(ptr)->shapelatency+=SHAPERCB(skb)->shapelen;
-
- /*
- * The packet may have slipped so far back it
- * fell off.
- */
- if(SHAPERCB(ptr)->shapelatency > SHAPER_LATENCY)
- {
- skb_unlink(ptr);
- dev_kfree_skb(ptr);
- }
- ptr=tmp;
- }
- else
- break;
- }
- if(ptr==NULL || ptr==(struct sk_buff *)&shaper->sendq)
- skb_queue_head(&shaper->sendq,skb);
- else
- {
- struct sk_buff *tmp;
- /*
- * Set the packet clock out time according to the
- * frames ahead. Im sure a bit of thought could drop
- * this loop.
- */
- for(tmp=skb_peek(&shaper->sendq); tmp!=NULL && tmp!=ptr; tmp=tmp->next)
- SHAPERCB(skb)->shapeclock+=tmp->shapelen;
- skb_append(ptr,skb);
- }
-#else
{
struct sk_buff *tmp;
/*
@@ -220,7 +174,7 @@
} else
skb_queue_tail(&shaper->sendq, skb);
}
-#endif
+
if(sh_debug)
printk("Frame queued.\n");
if(skb_queue_len(&shaper->sendq)>SHAPER_QLEN)
@@ -302,7 +256,7 @@
* Pull the frame and get interrupts back on.
*/
- skb_unlink(skb);
+ skb_unlink(skb, &shaper->sendq);
if (shaper->recovery <
SHAPERCB(skb)->shapeclock + SHAPERCB(skb)->shapelen)
shaper->recovery = SHAPERCB(skb)->shapeclock + SHAPERCB(skb)->shapelen;
diff --git a/drivers/net/wan/sdla_fr.c b/drivers/net/wan/sdla_fr.c
index c5f5e62..0497dbd 100644
--- a/drivers/net/wan/sdla_fr.c
+++ b/drivers/net/wan/sdla_fr.c
@@ -445,7 +445,7 @@
void s508_s514_lock(sdla_t *card, unsigned long *smp_flags);
unsigned short calc_checksum (char *, int);
-static int setup_fr_header(struct sk_buff** skb,
+static int setup_fr_header(struct sk_buff *skb,
struct net_device* dev, char op_mode);
@@ -1372,7 +1372,7 @@
/* Move the if_header() code to here. By inserting frame
* relay header in if_header() we would break the
* tcpdump and other packet sniffers */
- chan->fr_header_len = setup_fr_header(&skb,dev,chan->common.usedby);
+ chan->fr_header_len = setup_fr_header(skb,dev,chan->common.usedby);
if (chan->fr_header_len < 0 ){
++chan->ifstats.tx_dropped;
++card->wandev.stats.tx_dropped;
@@ -1597,8 +1597,6 @@
return 1;
}
- skb_unlink(skb);
-
chan->transmit_length = len;
chan->delay_skb = skb;
@@ -4871,18 +4869,15 @@
}
}
-static int setup_fr_header(struct sk_buff **skb_orig, struct net_device* dev,
+static int setup_fr_header(struct sk_buff *skb, struct net_device* dev,
char op_mode)
{
- struct sk_buff *skb = *skb_orig;
fr_channel_t *chan=dev->priv;
- if (op_mode == WANPIPE){
-
+ if (op_mode == WANPIPE) {
chan->fr_header[0]=Q922_UI;
switch (htons(skb->protocol)){
-
case ETH_P_IP:
chan->fr_header[1]=NLPID_IP;
break;
@@ -4894,16 +4889,14 @@
}
/* If we are in bridging mode, we must apply
- * an Ethernet header */
- if (op_mode == BRIDGE || op_mode == BRIDGE_NODE){
-
-
+ * an Ethernet header
+ */
+ if (op_mode == BRIDGE || op_mode == BRIDGE_NODE) {
/* Encapsulate the packet as a bridged Ethernet frame. */
#ifdef DEBUG
printk(KERN_INFO "%s: encapsulating skb for frame relay\n",
dev->name);
#endif
-
chan->fr_header[0] = 0x03;
chan->fr_header[1] = 0x00;
chan->fr_header[2] = 0x80;
@@ -4916,7 +4909,6 @@
/* Yuck. */
skb->protocol = ETH_P_802_3;
return 8;
-
}
return 0;