[SCSI] lpfc 8.3.25: Miscellaneous Bug fixes and code cleanup
Miscellaneous Bug fixes and code cleanup
- Fix 16G link speed reporting by adding check for 16G check.
- Change the check and enforcement of MAILBOX_EXT_SIZE (2048B)
to the check and enforcement of BSG_MBOX_SIZE - sizeof(MAILBOX_t) (3840B).
- Instead of waiting for a fixed amount of time after performing firmware
reset, the driver shall wait for the Lancer SLIPORT_STATUS register for the
readiness of the firmware for bring up.
- Add logging to indicate when dynamic parameters are changed.
- Add revision and date to the firmware image format.
- Use revision instead of rev_name to check firmware image version.
- Update temporary offset after memcopy is complete for firmware update.
- Consolidated the use of the macros to get rid of duplicated register
offset definitions.
- Removed the unused second parameter in routine lpfc_bsg_diag_mode_enter()
- Enable debugfs when debugfs is enabled.
- Update function comments for lpfc_sli4_alloc_xri and lpfc_sli4_init_rpi_hdrs.
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index 7fb0ba4..8675aa2 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -1471,13 +1471,12 @@
/**
* lpfc_bsg_diag_mode_enter - process preparing into device diag loopback mode
* @phba: Pointer to HBA context object.
- * @job: LPFC_BSG_VENDOR_DIAG_MODE
*
* This function is responsible for preparing driver for diag loopback
* on device.
*/
static int
-lpfc_bsg_diag_mode_enter(struct lpfc_hba *phba, struct fc_bsg_job *job)
+lpfc_bsg_diag_mode_enter(struct lpfc_hba *phba)
{
struct lpfc_vport **vports;
struct Scsi_Host *shost;
@@ -1521,7 +1520,6 @@
/**
* lpfc_bsg_diag_mode_exit - exit process from device diag loopback mode
* @phba: Pointer to HBA context object.
- * @job: LPFC_BSG_VENDOR_DIAG_MODE
*
* This function is responsible for driver exit processing of setting up
* diag loopback mode on device.
@@ -1586,7 +1584,7 @@
goto job_error;
}
- rc = lpfc_bsg_diag_mode_enter(phba, job);
+ rc = lpfc_bsg_diag_mode_enter(phba);
if (rc)
goto job_error;
@@ -1758,7 +1756,7 @@
goto job_error;
}
- rc = lpfc_bsg_diag_mode_enter(phba, job);
+ rc = lpfc_bsg_diag_mode_enter(phba);
if (rc)
goto job_error;
@@ -1982,7 +1980,7 @@
goto job_error;
}
- rc = lpfc_bsg_diag_mode_enter(phba, job);
+ rc = lpfc_bsg_diag_mode_enter(phba);
if (rc)
goto job_error;
@@ -3511,7 +3509,7 @@
lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
"2947 Issued SLI_CONFIG ext-buffer "
"maibox command, rc:x%x\n", rc);
- return 1;
+ return SLI_CONFIG_HANDLED;
}
lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC,
"2948 Failed to issue SLI_CONFIG ext-buffer "
@@ -3549,7 +3547,7 @@
LPFC_MBOXQ_t *pmboxq = NULL;
MAILBOX_t *pmb;
uint8_t *mbx;
- int rc = 0, i;
+ int rc = SLI_CONFIG_NOT_HANDLED, i;
mbox_req =
(struct dfc_mbox_req *)job->request->rqst_data.h_vendor.vendor_cmd;
@@ -3660,7 +3658,7 @@
lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
"2955 Issued SLI_CONFIG ext-buffer "
"maibox command, rc:x%x\n", rc);
- return 1;
+ return SLI_CONFIG_HANDLED;
}
lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC,
"2956 Failed to issue SLI_CONFIG ext-buffer "
@@ -3668,6 +3666,11 @@
rc = -EPIPE;
}
+ /* wait for additoinal external buffers */
+ job->reply->result = 0;
+ job->job_done(job);
+ return SLI_CONFIG_HANDLED;
+
job_error:
if (pmboxq)
mempool_free(pmboxq, phba->mbox_mem_pool);
@@ -3959,7 +3962,7 @@
lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
"2969 Issued SLI_CONFIG ext-buffer "
"maibox command, rc:x%x\n", rc);
- return 1;
+ return SLI_CONFIG_HANDLED;
}
lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC,
"2970 Failed to issue SLI_CONFIG ext-buffer "
@@ -4039,14 +4042,14 @@
struct lpfc_dmabuf *dmabuf)
{
struct dfc_mbox_req *mbox_req;
- int rc;
+ int rc = SLI_CONFIG_NOT_HANDLED;
mbox_req =
(struct dfc_mbox_req *)job->request->rqst_data.h_vendor.vendor_cmd;
/* mbox command with/without single external buffer */
if (mbox_req->extMboxTag == 0 && mbox_req->extSeqNum == 0)
- return SLI_CONFIG_NOT_HANDLED;
+ return rc;
/* mbox command and first external buffer */
if (phba->mbox_ext_buf_ctx.state == LPFC_BSG_MBOX_IDLE) {
@@ -4249,7 +4252,7 @@
* mailbox extension size
*/
if ((transmit_length > receive_length) ||
- (transmit_length > MAILBOX_EXT_SIZE)) {
+ (transmit_length > BSG_MBOX_SIZE - sizeof(MAILBOX_t))) {
rc = -ERANGE;
goto job_done;
}
@@ -4272,7 +4275,7 @@
/* receive length cannot be greater than mailbox
* extension size
*/
- if (receive_length > MAILBOX_EXT_SIZE) {
+ if (receive_length > BSG_MBOX_SIZE - sizeof(MAILBOX_t)) {
rc = -ERANGE;
goto job_done;
}
@@ -4306,7 +4309,8 @@
bde = (struct ulp_bde64 *)&pmb->un.varWords[4];
/* bde size cannot be greater than mailbox ext size */
- if (bde->tus.f.bdeSize > MAILBOX_EXT_SIZE) {
+ if (bde->tus.f.bdeSize >
+ BSG_MBOX_SIZE - sizeof(MAILBOX_t)) {
rc = -ERANGE;
goto job_done;
}
@@ -4332,7 +4336,8 @@
* mailbox extension size
*/
if ((receive_length == 0) ||
- (receive_length > MAILBOX_EXT_SIZE)) {
+ (receive_length >
+ BSG_MBOX_SIZE - sizeof(MAILBOX_t))) {
rc = -ERANGE;
goto job_done;
}