ARM: S3C64XX: Move device and device setup into mach-s3c64xx
Move the S3C64XX specific device and setup files into mach-s3c64xx as
they are unlikely to be used outside of this code.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index ce32e49..15e065e 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -26,6 +26,32 @@
Internal configuration for default SDHCI setup for S3C6400 and
S3C6410 SoCs.
+# platform specific device setup
+
+config S3C64XX_SETUP_I2C0
+ bool
+ default y
+ help
+ Common setup code for i2c bus 0.
+
+ Note, currently since i2c0 is always compiled, this setup helper
+ is always compiled with it.
+
+config S3C64XX_SETUP_I2C1
+ bool
+ help
+ Common setup code for i2c bus 1.
+
+config S3C64XX_SETUP_FB_24BPP
+ bool
+ help
+ Common setup code for S3C64XX with an 24bpp RGB display helper.
+
+config S3C64XX_SETUP_SDHCI_GPIO
+ bool
+ help
+ Common setup code for S3C64XX SDHCI GPIO configurations
+
# S36400 Macchine support
config MACH_SMDK6400
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 103bed4..49b71d5 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -18,9 +18,13 @@
obj-y += irq.o
obj-y += irq-eint.o
-# setup support
+# Device setup
+obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
+obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o
+obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
# PM
@@ -33,3 +37,10 @@
obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
obj-$(CONFIG_MACH_NCP) += mach-ncp.o
obj-$(CONFIG_MACH_HMT) += mach-hmt.o
+
+# device support
+
+obj-y += dev-uart.o
+obj-y += dev-rtc.o
+obj-$(CONFIG_S3C_ADC) += dev-adc.o
+obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o
diff --git a/arch/arm/plat-s3c64xx/dev-adc.c b/arch/arm/mach-s3c64xx/dev-adc.c
similarity index 100%
rename from arch/arm/plat-s3c64xx/dev-adc.c
rename to arch/arm/mach-s3c64xx/dev-adc.c
diff --git a/arch/arm/plat-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c
similarity index 100%
rename from arch/arm/plat-s3c64xx/dev-audio.c
rename to arch/arm/mach-s3c64xx/dev-audio.c
diff --git a/arch/arm/plat-s3c64xx/dev-rtc.c b/arch/arm/mach-s3c64xx/dev-rtc.c
similarity index 100%
rename from arch/arm/plat-s3c64xx/dev-rtc.c
rename to arch/arm/mach-s3c64xx/dev-rtc.c
diff --git a/arch/arm/plat-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c
similarity index 99%
rename from arch/arm/plat-s3c64xx/dev-spi.c
rename to arch/arm/mach-s3c64xx/dev-spi.c
index 0c20d27..29c32d0 100644
--- a/arch/arm/plat-s3c64xx/dev-spi.c
+++ b/arch/arm/mach-s3c64xx/dev-spi.c
@@ -17,8 +17,8 @@
#include <mach/map.h>
#include <mach/gpio.h>
#include <mach/gpio-bank-c.h>
+#include <mach/spi-clocks.h>
-#include <plat/spi-clocks.h>
#include <plat/s3c64xx-spi.h>
#include <plat/gpio-cfg.h>
#include <plat/irqs.h>
diff --git a/arch/arm/plat-s3c64xx/dev-uart.c b/arch/arm/mach-s3c64xx/dev-uart.c
similarity index 100%
rename from arch/arm/plat-s3c64xx/dev-uart.c
rename to arch/arm/mach-s3c64xx/dev-uart.c
diff --git a/arch/arm/plat-s3c64xx/include/plat/spi-clocks.h b/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
similarity index 89%
rename from arch/arm/plat-s3c64xx/include/plat/spi-clocks.h
rename to arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
index 524bdae..9d0c43b 100644
--- a/arch/arm/plat-s3c64xx/include/plat/spi-clocks.h
+++ b/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/spi-clocks.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
*
* Copyright (C) 2009 Samsung Electronics Ltd.
* Jaswinder Singh <jassi.brar@samsung.com>
diff --git a/arch/arm/plat-s3c64xx/setup-fb-24bpp.c b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
similarity index 100%
rename from arch/arm/plat-s3c64xx/setup-fb-24bpp.c
rename to arch/arm/mach-s3c64xx/setup-fb-24bpp.c
diff --git a/arch/arm/plat-s3c64xx/setup-i2c0.c b/arch/arm/mach-s3c64xx/setup-i2c0.c
similarity index 100%
rename from arch/arm/plat-s3c64xx/setup-i2c0.c
rename to arch/arm/mach-s3c64xx/setup-i2c0.c
diff --git a/arch/arm/plat-s3c64xx/setup-i2c1.c b/arch/arm/mach-s3c64xx/setup-i2c1.c
similarity index 100%
rename from arch/arm/plat-s3c64xx/setup-i2c1.c
rename to arch/arm/mach-s3c64xx/setup-i2c1.c
diff --git a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c b/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
similarity index 100%
rename from arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
rename to arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
index 37b4519..4edb580 100644
--- a/arch/arm/plat-s3c64xx/Kconfig
+++ b/arch/arm/plat-s3c64xx/Kconfig
@@ -46,30 +46,4 @@
bool "S3C64XX DMA"
select S3C_DMA
-# platform specific device setup
-
-config S3C64XX_SETUP_I2C0
- bool
- default y
- help
- Common setup code for i2c bus 0.
-
- Note, currently since i2c0 is always compiled, this setup helper
- is always compiled with it.
-
-config S3C64XX_SETUP_I2C1
- bool
- help
- Common setup code for i2c bus 1.
-
-config S3C64XX_SETUP_FB_24BPP
- bool
- help
- Common setup code for S3C64XX with an 24bpp RGB display helper.
-
-config S3C64XX_SETUP_SDHCI_GPIO
- bool
- help
- Common setup code for S3C64XX SDHCI GPIO configurations
-
endif
diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile
index 3e52dcdb..187b779 100644
--- a/arch/arm/plat-s3c64xx/Makefile
+++ b/arch/arm/plat-s3c64xx/Makefile
@@ -11,9 +11,6 @@
obj- :=
# Core files
-
-obj-y += dev-uart.o
-obj-y += dev-rtc.o
obj-y += cpu.o
obj-y += clock.o
obj-y += gpiolib.o
@@ -33,15 +30,3 @@
obj-$(CONFIG_S3C64XX_DMA) += dma.o
-# ADC support
-
-obj-$(CONFIG_S3C_ADC) += dev-adc.o
-
-# Device setup
-
-obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
-obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
-obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o
-obj-$(CONFIG_SPI_S3C64XX) += dev-spi.o