cxgb3: do vlan cleanup
- unify vlan and nonvlan rx path
- kill pi->vlan_grp and vlan_rx_register
- allow to turn on/off rx/tx vlan accel via ethtool (set_features)
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 9081ce0..93b41a7 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -2532,25 +2532,51 @@
}
}
-static void vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
+static void cxgb_vlan_mode(struct net_device *dev, u32 features)
{
struct port_info *pi = netdev_priv(dev);
struct adapter *adapter = pi->adapter;
- pi->vlan_grp = grp;
- if (adapter->params.rev > 0)
- t3_set_vlan_accel(adapter, 1 << pi->port_id, grp != NULL);
- else {
+ if (adapter->params.rev > 0) {
+ t3_set_vlan_accel(adapter, 1 << pi->port_id,
+ features & NETIF_F_HW_VLAN_RX);
+ } else {
/* single control for all ports */
- unsigned int i, have_vlans = 0;
+ unsigned int i, have_vlans = features & NETIF_F_HW_VLAN_RX;
+
for_each_port(adapter, i)
- have_vlans |= adap2pinfo(adapter, i)->vlan_grp != NULL;
+ have_vlans |=
+ adapter->port[i]->features & NETIF_F_HW_VLAN_RX;
t3_set_vlan_accel(adapter, 1, have_vlans);
}
t3_synchronize_rx(adapter, pi);
}
+static u32 cxgb_fix_features(struct net_device *dev, u32 features)
+{
+ /*
+ * Since there is no support for separate rx/tx vlan accel
+ * enable/disable make sure tx flag is always in same state as rx.
+ */
+ if (features & NETIF_F_HW_VLAN_RX)
+ features |= NETIF_F_HW_VLAN_TX;
+ else
+ features &= ~NETIF_F_HW_VLAN_TX;
+
+ return features;
+}
+
+static int cxgb_set_features(struct net_device *dev, u32 features)
+{
+ u32 changed = dev->features ^ features;
+
+ if (changed & NETIF_F_HW_VLAN_RX)
+ cxgb_vlan_mode(dev, features);
+
+ return 0;
+}
+
#ifdef CONFIG_NET_POLL_CONTROLLER
static void cxgb_netpoll(struct net_device *dev)
{
@@ -3131,7 +3157,8 @@
.ndo_do_ioctl = cxgb_ioctl,
.ndo_change_mtu = cxgb_change_mtu,
.ndo_set_mac_address = cxgb_set_mac_addr,
- .ndo_vlan_rx_register = vlan_rx_register,
+ .ndo_fix_features = cxgb_fix_features,
+ .ndo_set_features = cxgb_set_features,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = cxgb_netpoll,
#endif
@@ -3263,9 +3290,8 @@
netdev->mem_start = mmio_start;
netdev->mem_end = mmio_start + mmio_len - 1;
netdev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM |
- NETIF_F_TSO | NETIF_F_RXCSUM;
- netdev->features |= netdev->hw_features |
- NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+ NETIF_F_TSO | NETIF_F_RXCSUM | NETIF_F_HW_VLAN_RX;
+ netdev->features |= netdev->hw_features | NETIF_F_HW_VLAN_TX;
if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
@@ -3329,6 +3355,9 @@
err = sysfs_create_group(&adapter->port[0]->dev.kobj,
&cxgb3_attr_group);
+ for_each_port(adapter, i)
+ cxgb_vlan_mode(adapter->port[i], adapter->port[i]->features);
+
print_port_info(adapter, ai);
return 0;