diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 3183b3f..024e6d5 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -316,7 +316,6 @@
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 	.cable_detect		= ata_cable_40wire,
 
-	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 
@@ -348,7 +347,6 @@
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 	.cable_detect		= ich_pata_cable_detect,
 
-	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 
@@ -375,7 +373,6 @@
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 
-	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 
@@ -521,7 +518,6 @@
 static struct ata_port_info piix_port_info[] = {
 	[piix_pata_mwdma] = 	/* PIIX3 MWDMA only */
 	{
-		.sht		= &piix_sht,
 		.flags		= PIIX_PATA_FLAGS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
@@ -530,7 +526,6 @@
 
 	[piix_pata_33] =	/* PIIX4 at 33MHz */
 	{
-		.sht		= &piix_sht,
 		.flags		= PIIX_PATA_FLAGS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
@@ -540,7 +535,6 @@
 
 	[ich_pata_33] = 	/* ICH0 - ICH at 33Mhz*/
 	{
-		.sht		= &piix_sht,
 		.flags		= PIIX_PATA_FLAGS,
 		.pio_mask 	= 0x1f,	/* pio 0-4 */
 		.mwdma_mask	= 0x06, /* Check: maybe 0x07  */
@@ -550,7 +544,6 @@
 
 	[ich_pata_66] = 	/* ICH controllers up to 66MHz */
 	{
-		.sht		= &piix_sht,
 		.flags		= PIIX_PATA_FLAGS,
 		.pio_mask 	= 0x1f,	/* pio 0-4 */
 		.mwdma_mask	= 0x06, /* MWDMA0 is broken on chip */
@@ -560,7 +553,6 @@
 
 	[ich_pata_100] =
 	{
-		.sht		= &piix_sht,
 		.flags		= PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x06, /* mwdma1-2 */
@@ -570,7 +562,6 @@
 
 	[ich5_sata] =
 	{
-		.sht		= &piix_sht,
 		.flags		= PIIX_SATA_FLAGS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
@@ -580,7 +571,6 @@
 
 	[ich6_sata] =
 	{
-		.sht		= &piix_sht,
 		.flags		= PIIX_SATA_FLAGS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
@@ -590,7 +580,6 @@
 
 	[ich6_sata_ahci] =
 	{
-		.sht		= &piix_sht,
 		.flags		= PIIX_SATA_FLAGS | PIIX_FLAG_AHCI,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
@@ -600,7 +589,6 @@
 
 	[ich6m_sata_ahci] =
 	{
-		.sht		= &piix_sht,
 		.flags		= PIIX_SATA_FLAGS | PIIX_FLAG_AHCI,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
@@ -610,7 +598,6 @@
 
 	[ich8_sata_ahci] =
 	{
-		.sht		= &piix_sht,
 		.flags		= PIIX_SATA_FLAGS | PIIX_FLAG_AHCI,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
@@ -620,7 +607,6 @@
 
 	[ich8_2port_sata] =
 	{
-		.sht		= &piix_sht,
 		.flags		= PIIX_SATA_FLAGS | PIIX_FLAG_AHCI,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
@@ -630,7 +616,6 @@
 
 	[tolapai_sata_ahci] =
 	{
-		.sht		= &piix_sht,
 		.flags		= PIIX_SATA_FLAGS | PIIX_FLAG_AHCI,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
@@ -640,7 +625,6 @@
 
 	[ich8m_apple_sata_ahci] =
 	{
-		.sht		= &piix_sht,
 		.flags		= PIIX_SATA_FLAGS | PIIX_FLAG_AHCI,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
@@ -1256,10 +1240,10 @@
 	return no_piix_dma;
 }
 
-static void __devinit piix_init_pcs(struct pci_dev *pdev,
-				    struct ata_port_info *pinfo,
+static void __devinit piix_init_pcs(struct ata_host *host,
 				    const struct piix_map_db *map_db)
 {
+	struct pci_dev *pdev = to_pci_dev(host->dev);
 	u16 pcs, new_pcs;
 
 	pci_read_config_word(pdev, ICH5_PCS, &pcs);
@@ -1273,11 +1257,10 @@
 	}
 }
 
-static void __devinit piix_init_sata_map(struct pci_dev *pdev,
-					 struct ata_port_info *pinfo,
-					 const struct piix_map_db *map_db)
+static const int *__devinit piix_init_sata_map(struct pci_dev *pdev,
+					       struct ata_port_info *pinfo,
+					       const struct piix_map_db *map_db)
 {
-	struct piix_host_priv *hpriv = pinfo[0].private_data;
 	const int *map;
 	int i, invalid_map = 0;
 	u8 map_value;
@@ -1301,7 +1284,6 @@
 		case IDE:
 			WARN_ON((i & 1) || map[i + 1] != IDE);
 			pinfo[i / 2] = piix_port_info[ich_pata_100];
-			pinfo[i / 2].private_data = hpriv;
 			i++;
 			printk(" IDE IDE");
 			break;
@@ -1319,7 +1301,7 @@
 		dev_printk(KERN_ERR, &pdev->dev,
 			   "invalid MAP value %u\n", map_value);
 
-	hpriv->map = map;
+	return map;
 }
 
 static void piix_iocfg_bit18_quirk(struct pci_dev *pdev)
@@ -1378,8 +1360,10 @@
 	struct device *dev = &pdev->dev;
 	struct ata_port_info port_info[2];
 	const struct ata_port_info *ppi[] = { &port_info[0], &port_info[1] };
-	struct piix_host_priv *hpriv;
 	unsigned long port_flags;
+	struct ata_host *host;
+	struct piix_host_priv *hpriv;
+	int rc;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev,
@@ -1389,17 +1373,31 @@
 	if (!in_module_init)
 		return -ENODEV;
 
+	port_info[0] = piix_port_info[ent->driver_data];
+	port_info[1] = piix_port_info[ent->driver_data];
+
+	port_flags = port_info[0].flags;
+
+	/* enable device and prepare host */
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		return rc;
+
+	/* SATA map init can change port_info, do it before prepping host */
 	hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
 	if (!hpriv)
 		return -ENOMEM;
 
-	port_info[0] = piix_port_info[ent->driver_data];
-	port_info[1] = piix_port_info[ent->driver_data];
-	port_info[0].private_data = hpriv;
-	port_info[1].private_data = hpriv;
+	if (port_flags & ATA_FLAG_SATA)
+		hpriv->map = piix_init_sata_map(pdev, port_info,
+					piix_map_db_table[ent->driver_data]);
 
-	port_flags = port_info[0].flags;
+	rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
+	if (rc)
+		return rc;
+	host->private_data = hpriv;
 
+	/* initialize controller */
 	if (port_flags & PIIX_FLAG_AHCI) {
 		u8 tmp;
 		pci_read_config_byte(pdev, PIIX_SCC, &tmp);
@@ -1410,13 +1408,8 @@
 		}
 	}
 
-	/* Initialize SATA map */
-	if (port_flags & ATA_FLAG_SATA) {
-		piix_init_sata_map(pdev, port_info,
-				   piix_map_db_table[ent->driver_data]);
-		piix_init_pcs(pdev, port_info,
-			      piix_map_db_table[ent->driver_data]);
-	}
+	if (port_flags & ATA_FLAG_SATA)
+		piix_init_pcs(host, piix_map_db_table[ent->driver_data]);
 
 	/* apply IOCFG bit18 quirk */
 	piix_iocfg_bit18_quirk(pdev);
@@ -1434,12 +1427,14 @@
 		/* This writes into the master table but it does not
 		   really matter for this errata as we will apply it to
 		   all the PIIX devices on the board */
-		port_info[0].mwdma_mask = 0;
-		port_info[0].udma_mask = 0;
-		port_info[1].mwdma_mask = 0;
-		port_info[1].udma_mask = 0;
+		host->ports[0]->mwdma_mask = 0;
+		host->ports[0]->udma_mask = 0;
+		host->ports[1]->mwdma_mask = 0;
+		host->ports[1]->udma_mask = 0;
 	}
-	return ata_pci_init_one(pdev, ppi);
+
+	pci_set_master(pdev);
+	return ata_pci_activate_sff_host(host, ata_interrupt, &piix_sht);
 }
 
 static int __init piix_init(void)