)]}'
{
  "commit": "8b8c87dee47ae7e41af95d03ca56b3a4633466a6",
  "tree": "800d46cd2350b7b6205204054529f95be79e834f",
  "parents": [
    "cce58ab380727169ef72b76481441f851e5850b0"
  ],
  "author": {
    "name": "Darius Augulis",
    "email": "augulis.darius@gmail.com",
    "time": "Tue Nov 16 18:08:50 2010 +0900"
  },
  "committer": {
    "name": "Kukjin Kim",
    "email": "kgene.kim@samsung.com",
    "time": "Thu Nov 25 10:58:11 2010 +0900"
  },
  "message": "ARM: S3C64XX: fix uart clock setup for mini6410/real6410\n\nDon\u0027t rewrite clock config in UCON preconfigured by\nbootloader. No need to set 10th bit in UCON because\n[11:10] 2\u0027b00 means source clock is PCLK too.\nIf set, console does not work if bootloader\nhas preconfigured [11:10] with 2\u0027b00.\nIf not set, console works with any bootloader\nconfig value (2\u0027bxx).\nMore information about clock setup in UCON is available\nin \"S3C6410X RISC Microprocessor User\u0027s Manual,\nRevision 1.20\" p. 31-13 (Chapter 31.6.2\nUART CONTROL REGISTER).\n\nSigned-off-by: Darius Augulis \u003caugulis.darius@gmail.com\u003e\nSigned-off-by: Kukjin Kim \u003ckgene.kim@samsung.com\u003e\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "249c62956471a04b970c082fb7eaf011373de9af",
      "old_mode": 33188,
      "old_path": "arch/arm/mach-s3c64xx/mach-mini6410.c",
      "new_id": "89f35e02e88367aacfe5d2a60187859c1ecd3be1",
      "new_mode": 33188,
      "new_path": "arch/arm/mach-s3c64xx/mach-mini6410.c"
    },
    {
      "type": "modify",
      "old_id": "f9ef9b5c5f5a09f9aa692e3b705e14905ad4cae9",
      "old_mode": 33188,
      "old_path": "arch/arm/mach-s3c64xx/mach-real6410.c",
      "new_id": "4957ab0a0d4a371effa85505fcc40b5957294485",
      "new_mode": 33188,
      "new_path": "arch/arm/mach-s3c64xx/mach-real6410.c"
    }
  ]
}