msm: clock-8960: Branch unique registers for 8960 and 8064
Use cpu_is_apq8064() and cpu_is_msm8960() to branch registers that are
unique to a specific soc. Add comments for regs that are different
between 8960 and 8064.
Change-Id: I24175789ebcd687e5a85392c2f2b4d72a4f7ef6e
Signed-off-by: Tianyi Gou <tgou@codeaurora.org>
diff --git a/arch/arm/mach-msm/clock-8960.c b/arch/arm/mach-msm/clock-8960.c
index 2f092c8..3265ffa 100644
--- a/arch/arm/mach-msm/clock-8960.c
+++ b/arch/arm/mach-msm/clock-8960.c
@@ -5447,13 +5447,19 @@
/* Deassert MM SW_RESET_ALL signal. */
writel_relaxed(0, SW_RESET_ALL_REG);
+ /*
+ * Some bits are only used on either 8960 or 8064 and are marked as
+ * reserved bits on the other SoC. Writing to these reserved bits
+ * should have no effect.
+ */
/* Initialize MM AHB registers: Enable the FPB clock and disable HW
* gating for all clocks. Also set VFE_AHB's FORCE_CORE_ON bit to
* prevent its memory from being collapsed when the clock is halted.
* The sleep and wake-up delays are set to safe values. */
rmwreg(0x00000003, AHB_EN_REG, 0x6C000103);
writel_relaxed(0x000007F9, AHB_EN2_REG);
- rmwreg(0x00000000, AHB_EN3_REG, 0x00000001);
+ if (cpu_is_apq8064())
+ rmwreg(0x00000000, AHB_EN3_REG, 0x00000001);
/* Deassert all locally-owned MM AHB resets. */
rmwreg(0, SW_RESET_AHB_REG, 0xFFF7DFFF);
@@ -5467,7 +5473,8 @@
rmwreg(0x3027FCFF, MAXI_EN2_REG, 0x3A3FFFFF);
rmwreg(0x0027FCFF, MAXI_EN3_REG, 0x003FFFFF);
rmwreg(0x0027FCFF, MAXI_EN4_REG, 0x017FFFFF);
- rmwreg(0x009FE4FF, MAXI_EN5_REG, 0x01FFEFFF);
+ if (cpu_is_apq8064())
+ rmwreg(0x009FE4FF, MAXI_EN5_REG, 0x01FFEFFF);
rmwreg(0x000003C7, SAXI_EN_REG, 0x00003FFF);
/* Initialize MM CC registers: Set MM FORCE_CORE_ON bits so that core
@@ -5479,22 +5486,26 @@
rmwreg(0x80FF0000, DSI2_BYTE_CC_REG, 0xE0FF0010);
rmwreg(0x80FF0000, DSI_PIXEL_CC_REG, 0xE0FF0010);
rmwreg(0x80FF0000, DSI2_PIXEL_CC_REG, 0xE0FF0010);
- rmwreg(0x80FF0000, GFX2D0_CC_REG, 0xE0FF0010);
- rmwreg(0x80FF0000, GFX2D1_CC_REG, 0xE0FF0010);
rmwreg(0x80FF0000, GFX3D_CC_REG, 0xE0FF0010);
rmwreg(0x80FF0000, IJPEG_CC_REG, 0xE0FF0010);
rmwreg(0x80FF0000, JPEGD_CC_REG, 0xE0FF0010);
rmwreg(0x80FF0000, MDP_CC_REG, 0xE1FF0010);
rmwreg(0x80FF0000, MDP_LUT_CC_REG, 0xE0FF0010);
rmwreg(0x80FF0000, ROT_CC_REG, 0xE0FF0010);
- rmwreg(0x80FF0000, TV_CC_REG, 0xE1FFC010);
rmwreg(0x000004FF, TV_CC2_REG, 0x000007FF);
rmwreg(0xC0FF0000, VCODEC_CC_REG, 0xE0FF0010);
rmwreg(0x80FF0000, VFE_CC_REG, 0xE0FF4010);
rmwreg(0x800000FF, VFE_CC2_REG, 0xE00000FF);
rmwreg(0x80FF0000, VPE_CC_REG, 0xE0FF0010);
- if (cpu_is_apq8064())
+ if (cpu_is_msm8960()) {
+ rmwreg(0x80FF0000, GFX2D0_CC_REG, 0xE0FF0010);
+ rmwreg(0x80FF0000, GFX2D1_CC_REG, 0xE0FF0010);
+ rmwreg(0x80FF0000, TV_CC_REG, 0xE1FFC010);
+ }
+ if (cpu_is_apq8064()) {
+ rmwreg(0x00000000, TV_CC_REG, 0x00004010);
rmwreg(0x80FF0000, VCAP_CC_REG, 0xE0FF1010);
+ }
/*
* Initialize USB_HS_HCLK_FS registers: Set FORCE_C_ON bits so that
@@ -5502,8 +5513,10 @@
* and wake-up value to max.
*/
rmwreg(0x0000004F, USB_HS1_HCLK_FS_REG, 0x0000007F);
- rmwreg(0x0000004F, USB_HS3_HCLK_FS_REG, 0x0000007F);
- rmwreg(0x0000004F, USB_HS4_HCLK_FS_REG, 0x0000007F);
+ if (cpu_is_apq8064()) {
+ rmwreg(0x0000004F, USB_HS3_HCLK_FS_REG, 0x0000007F);
+ rmwreg(0x0000004F, USB_HS4_HCLK_FS_REG, 0x0000007F);
+ }
/* De-assert MM AXI resets to all hardware blocks. */
writel_relaxed(0, SW_RESET_AXI_REG);
@@ -5529,7 +5542,8 @@
writel_relaxed(BIT(15), PDM_CLK_NS_REG);
/* Source SLIMBus xo src from slimbus reference clock */
- writel_relaxed(0x3, SLIMBUS_XO_SRC_CLK_CTL_REG);
+ if (cpu_is_msm8960())
+ writel_relaxed(0x3, SLIMBUS_XO_SRC_CLK_CTL_REG);
/* Source the dsi_byte_clks from the DSI PHY PLLs */
rmwreg(0x1, DSI1_BYTE_NS_REG, 0x7);