x86,percpu: generalize lpage first chunk allocator
Generalize and move x86 setup_pcpu_lpage() into
pcpu_lpage_first_chunk(). setup_pcpu_lpage() now is a simple wrapper
around the generalized version. Other than taking size parameters and
using arch supplied callbacks to allocate/free/map memory,
pcpu_lpage_first_chunk() is identical to the original implementation.
This simplifies arch code and will help converting more archs to
dynamic percpu allocator.
While at it, factor out pcpu_calc_fc_sizes() which is common to
pcpu_embed_first_chunk() and pcpu_lpage_first_chunk().
[ Impact: code reorganization and generalization ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index ab896b3..4f2e0ac 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -137,44 +137,21 @@
}
/*
- * Large page remap allocator
- *
- * This allocator uses PMD page as unit. A PMD page is allocated for
- * each cpu and each is remapped into vmalloc area using PMD mapping.
- * As PMD page is quite large, only part of it is used for the first
- * chunk. Unused part is returned to the bootmem allocator.
- *
- * So, the PMD pages are mapped twice - once to the physical mapping
- * and to the vmalloc area for the first percpu chunk. The double
- * mapping does add one more PMD TLB entry pressure but still is much
- * better than only using 4k mappings while still being NUMA friendly.
+ * Large page remapping allocator
*/
#ifdef CONFIG_NEED_MULTIPLE_NODES
-struct pcpul_ent {
- unsigned int cpu;
- void *ptr;
-};
-
-static size_t pcpul_size;
-static struct pcpul_ent *pcpul_map;
-static struct vm_struct pcpul_vm;
-
-static struct page * __init pcpul_get_page(unsigned int cpu, int pageno)
+static void __init pcpul_map(void *ptr, size_t size, void *addr)
{
- size_t off = (size_t)pageno << PAGE_SHIFT;
+ pmd_t *pmd, pmd_v;
- if (off >= pcpul_size)
- return NULL;
-
- return virt_to_page(pcpul_map[cpu].ptr + off);
+ pmd = populate_extra_pmd((unsigned long)addr);
+ pmd_v = pfn_pmd(page_to_pfn(virt_to_page(ptr)), PAGE_KERNEL_LARGE);
+ set_pmd(pmd, pmd_v);
}
static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
{
- size_t map_size, dyn_size;
- unsigned int cpu;
- int i, j;
- ssize_t ret;
+ size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
if (!chosen) {
size_t vm_size = VMALLOC_END - VMALLOC_START;
@@ -198,134 +175,10 @@
return -EINVAL;
}
- /*
- * Currently supports only single page. Supporting multiple
- * pages won't be too difficult if it ever becomes necessary.
- */
- pcpul_size = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE +
- PERCPU_DYNAMIC_RESERVE);
- if (pcpul_size > PMD_SIZE) {
- pr_warning("PERCPU: static data is larger than large page, "
- "can't use large page\n");
- return -EINVAL;
- }
- dyn_size = pcpul_size - static_size - PERCPU_FIRST_CHUNK_RESERVE;
-
- /* allocate pointer array and alloc large pages */
- map_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpul_map[0]));
- pcpul_map = alloc_bootmem(map_size);
-
- for_each_possible_cpu(cpu) {
- pcpul_map[cpu].cpu = cpu;
- pcpul_map[cpu].ptr = pcpu_alloc_bootmem(cpu, PMD_SIZE,
- PMD_SIZE);
- if (!pcpul_map[cpu].ptr) {
- pr_warning("PERCPU: failed to allocate large page "
- "for cpu%u\n", cpu);
- goto enomem;
- }
-
- /*
- * Only use pcpul_size bytes and give back the rest.
- *
- * Ingo: The 2MB up-rounding bootmem is needed to make
- * sure the partial 2MB page is still fully RAM - it's
- * not well-specified to have a PAT-incompatible area
- * (unmapped RAM, device memory, etc.) in that hole.
- */
- free_bootmem(__pa(pcpul_map[cpu].ptr + pcpul_size),
- PMD_SIZE - pcpul_size);
-
- memcpy(pcpul_map[cpu].ptr, __per_cpu_load, static_size);
- }
-
- /* allocate address and map */
- pcpul_vm.flags = VM_ALLOC;
- pcpul_vm.size = num_possible_cpus() * PMD_SIZE;
- vm_area_register_early(&pcpul_vm, PMD_SIZE);
-
- for_each_possible_cpu(cpu) {
- pmd_t *pmd, pmd_v;
-
- pmd = populate_extra_pmd((unsigned long)pcpul_vm.addr +
- cpu * PMD_SIZE);
- pmd_v = pfn_pmd(page_to_pfn(virt_to_page(pcpul_map[cpu].ptr)),
- PAGE_KERNEL_LARGE);
- set_pmd(pmd, pmd_v);
- }
-
- /* we're ready, commit */
- pr_info("PERCPU: Remapped at %p with large pages, static data "
- "%zu bytes\n", pcpul_vm.addr, static_size);
-
- ret = pcpu_setup_first_chunk(pcpul_get_page, static_size,
- PERCPU_FIRST_CHUNK_RESERVE, dyn_size,
- PMD_SIZE, pcpul_vm.addr, NULL);
-
- /* sort pcpul_map array for pcpu_lpage_remapped() */
- for (i = 0; i < num_possible_cpus() - 1; i++)
- for (j = i + 1; j < num_possible_cpus(); j++)
- if (pcpul_map[i].ptr > pcpul_map[j].ptr) {
- struct pcpul_ent tmp = pcpul_map[i];
- pcpul_map[i] = pcpul_map[j];
- pcpul_map[j] = tmp;
- }
-
- return ret;
-
-enomem:
- for_each_possible_cpu(cpu)
- if (pcpul_map[cpu].ptr)
- free_bootmem(__pa(pcpul_map[cpu].ptr), pcpul_size);
- free_bootmem(__pa(pcpul_map), map_size);
- return -ENOMEM;
-}
-
-/**
- * pcpu_lpage_remapped - determine whether a kaddr is in pcpul recycled area
- * @kaddr: the kernel address in question
- *
- * Determine whether @kaddr falls in the pcpul recycled area. This is
- * used by pageattr to detect VM aliases and break up the pcpu PMD
- * mapping such that the same physical page is not mapped under
- * different attributes.
- *
- * The recycled area is always at the tail of a partially used PMD
- * page.
- *
- * RETURNS:
- * Address of corresponding remapped pcpu address if match is found;
- * otherwise, NULL.
- */
-void *pcpu_lpage_remapped(void *kaddr)
-{
- void *pmd_addr = (void *)((unsigned long)kaddr & PMD_MASK);
- unsigned long offset = (unsigned long)kaddr & ~PMD_MASK;
- int left = 0, right = num_possible_cpus() - 1;
- int pos;
-
- /* pcpul in use at all? */
- if (!pcpul_map)
- return NULL;
-
- /* okay, perform binary search */
- while (left <= right) {
- pos = (left + right) / 2;
-
- if (pcpul_map[pos].ptr < pmd_addr)
- left = pos + 1;
- else if (pcpul_map[pos].ptr > pmd_addr)
- right = pos - 1;
- else {
- /* it shouldn't be in the area for the first chunk */
- WARN_ON(offset < pcpul_size);
-
- return pcpul_vm.addr +
- pcpul_map[pos].cpu * PMD_SIZE + offset;
- }
- }
-
- return NULL;
+ return pcpu_lpage_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE,
+ reserve - PERCPU_FIRST_CHUNK_RESERVE,
+ PMD_SIZE,
+ pcpu_fc_alloc, pcpu_fc_free, pcpul_map);
}
#else
static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)