arm/dt: tegra devicetree support
Everything required to populate NVIDIA Tegra devices from the device
tree. This patch adds a new DT_MACHINE_DESC() which matches against
a tegra20 device tree. So far it only registers the on-chip devices,
but it will be refined in follow on patches to configure clocks and
pin IO from the device tree also.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts
new file mode 100644
index 0000000..4c05334
--- /dev/null
+++ b/arch/arm/boot/dts/tegra-harmony.dts
@@ -0,0 +1,70 @@
+/dts-v1/;
+
+/memreserve/ 0x1c000000 0x04000000;
+/include/ "tegra20.dtsi"
+
+/ {
+ model = "NVIDIA Tegra2 Harmony evaluation board";
+ compatible = "nvidia,harmony", "nvidia,tegra20";
+
+ chosen {
+ bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw rootwait";
+ };
+
+ memory@0 {
+ reg = < 0x00000000 0x40000000 >;
+ };
+
+ i2c@7000c000 {
+ clock-frequency = <400000>;
+
+ codec: wm8903@1a {
+ compatible = "wlf,wm8903";
+ reg = <0x1a>;
+ interrupts = < 347 >;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ /* 0x8000 = Not configured */
+ gpio-cfg = < 0x8000 0x8000 0 0x8000 0x8000 >;
+ };
+ };
+
+ i2c@7000c400 {
+ clock-frequency = <400000>;
+ };
+
+ i2c@7000c500 {
+ clock-frequency = <400000>;
+ };
+
+ i2c@7000d000 {
+ clock-frequency = <400000>;
+ };
+
+ sound {
+ compatible = "nvidia,harmony-sound", "nvidia,tegra-wm8903";
+
+ spkr-en-gpios = <&codec 2 0>;
+ hp-det-gpios = <&gpio 178 0>;
+ int-mic-en-gpios = <&gpio 184 0>;
+ ext-mic-en-gpios = <&gpio 185 0>;
+ };
+
+ serial@70006300 {
+ clock-frequency = < 216000000 >;
+ };
+
+ sdhci@c8000200 {
+ gpios = <&gpio 69 0>, /* cd, gpio PI5 */
+ <&gpio 57 0>, /* wp, gpio PH1 */
+ <&gpio 155 0>; /* power, gpio PT3 */
+ };
+
+ sdhci@c8000600 {
+ gpios = <&gpio 58 0>, /* cd, gpio PH2 */
+ <&gpio 59 0>, /* wp, gpio PH3 */
+ <&gpio 70 0>; /* power, gpio PI6 */
+ };
+};