drivers/net: Move && and || to end of previous line
Only files where David Miller is the primary git-signer.
wireless, wimax, ixgbe, etc are not modified.
Compile tested x86 allyesconfig only
Not all files compiled (not x86 compatible)
Added a few > 80 column lines, which I ignored.
Existing checkpatch complaints ignored.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index f671bb8..2282e72 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -425,8 +425,8 @@
* network traffic (demand mode).
*/
struct ppp *ppp = PF_TO_PPP(pf);
- if (ppp->n_channels == 0
- && (ppp->flags & SC_LOOP_TRAFFIC) == 0)
+ if (ppp->n_channels == 0 &&
+ (ppp->flags & SC_LOOP_TRAFFIC) == 0)
break;
}
ret = -EAGAIN;
@@ -511,8 +511,8 @@
else if (pf->kind == INTERFACE) {
/* see comment in ppp_read */
struct ppp *ppp = PF_TO_PPP(pf);
- if (ppp->n_channels == 0
- && (ppp->flags & SC_LOOP_TRAFFIC) == 0)
+ if (ppp->n_channels == 0 &&
+ (ppp->flags & SC_LOOP_TRAFFIC) == 0)
mask |= POLLIN | POLLRDNORM;
}
@@ -1057,8 +1057,8 @@
ppp_xmit_lock(ppp);
if (!ppp->closing) {
ppp_push(ppp);
- while (!ppp->xmit_pending
- && (skb = skb_dequeue(&ppp->file.xq)))
+ while (!ppp->xmit_pending &&
+ (skb = skb_dequeue(&ppp->file.xq)))
ppp_send_frame(ppp, skb);
/* If there's no work left to do, tell the core net
code that we can accept some more. */
@@ -1137,18 +1137,18 @@
/* the filter instructions are constructed assuming
a four-byte PPP header on each packet */
*skb_push(skb, 2) = 1;
- if (ppp->pass_filter
- && sk_run_filter(skb, ppp->pass_filter,
- ppp->pass_len) == 0) {
+ if (ppp->pass_filter &&
+ sk_run_filter(skb, ppp->pass_filter,
+ ppp->pass_len) == 0) {
if (ppp->debug & 1)
printk(KERN_DEBUG "PPP: outbound frame not passed\n");
kfree_skb(skb);
return;
}
/* if this packet passes the active filter, record the time */
- if (!(ppp->active_filter
- && sk_run_filter(skb, ppp->active_filter,
- ppp->active_len) == 0))
+ if (!(ppp->active_filter &&
+ sk_run_filter(skb, ppp->active_filter,
+ ppp->active_len) == 0))
ppp->last_xmit = jiffies;
skb_pull(skb, 2);
#else
@@ -1202,8 +1202,8 @@
}
/* try to do packet compression */
- if ((ppp->xstate & SC_COMP_RUN) && ppp->xc_state
- && proto != PPP_LCP && proto != PPP_CCP) {
+ if ((ppp->xstate & SC_COMP_RUN) && ppp->xc_state &&
+ proto != PPP_LCP && proto != PPP_CCP) {
if (!(ppp->flags & SC_CCP_UP) && (ppp->flags & SC_MUST_COMP)) {
if (net_ratelimit())
printk(KERN_ERR "ppp: compression required but down - pkt dropped.\n");
@@ -1577,8 +1577,8 @@
/* put it on the channel queue */
skb_queue_tail(&pch->file.rq, skb);
/* drop old frames if queue too long */
- while (pch->file.rq.qlen > PPP_MAX_RQLEN
- && (skb = skb_dequeue(&pch->file.rq)))
+ while (pch->file.rq.qlen > PPP_MAX_RQLEN &&
+ (skb = skb_dequeue(&pch->file.rq)))
kfree_skb(skb);
wake_up_interruptible(&pch->file.rwait);
} else {
@@ -1654,8 +1654,8 @@
* Note that some decompressors need to see uncompressed frames
* that come in as well as compressed frames.
*/
- if (ppp->rc_state && (ppp->rstate & SC_DECOMP_RUN)
- && (ppp->rstate & (SC_DC_FERROR | SC_DC_ERROR)) == 0)
+ if (ppp->rc_state && (ppp->rstate & SC_DECOMP_RUN) &&
+ (ppp->rstate & (SC_DC_FERROR | SC_DC_ERROR)) == 0)
skb = ppp_decompress_frame(ppp, skb);
if (ppp->flags & SC_MUST_COMP && ppp->rstate & SC_DC_FERROR)
@@ -1726,8 +1726,8 @@
/* control or unknown frame - pass it to pppd */
skb_queue_tail(&ppp->file.rq, skb);
/* limit queue length by dropping old frames */
- while (ppp->file.rq.qlen > PPP_MAX_RQLEN
- && (skb = skb_dequeue(&ppp->file.rq)))
+ while (ppp->file.rq.qlen > PPP_MAX_RQLEN &&
+ (skb = skb_dequeue(&ppp->file.rq)))
kfree_skb(skb);
/* wake up any process polling or blocking on read */
wake_up_interruptible(&ppp->file.rwait);
@@ -1745,26 +1745,26 @@
goto err;
*skb_push(skb, 2) = 0;
- if (ppp->pass_filter
- && sk_run_filter(skb, ppp->pass_filter,
- ppp->pass_len) == 0) {
+ if (ppp->pass_filter &&
+ sk_run_filter(skb, ppp->pass_filter,
+ ppp->pass_len) == 0) {
if (ppp->debug & 1)
printk(KERN_DEBUG "PPP: inbound frame "
"not passed\n");
kfree_skb(skb);
return;
}
- if (!(ppp->active_filter
- && sk_run_filter(skb, ppp->active_filter,
- ppp->active_len) == 0))
+ if (!(ppp->active_filter &&
+ sk_run_filter(skb, ppp->active_filter,
+ ppp->active_len) == 0))
ppp->last_recv = jiffies;
__skb_pull(skb, 2);
} else
#endif /* CONFIG_PPP_FILTER */
ppp->last_recv = jiffies;
- if ((ppp->dev->flags & IFF_UP) == 0
- || ppp->npmode[npi] != NPMODE_PASS) {
+ if ((ppp->dev->flags & IFF_UP) == 0 ||
+ ppp->npmode[npi] != NPMODE_PASS) {
kfree_skb(skb);
} else {
/* chop off protocol */
@@ -2228,13 +2228,13 @@
unsigned char ccp_option[CCP_MAX_OPTION_LENGTH];
err = -EFAULT;
- if (copy_from_user(&data, (void __user *) arg, sizeof(data))
- || (data.length <= CCP_MAX_OPTION_LENGTH
- && copy_from_user(ccp_option, (void __user *) data.ptr, data.length)))
+ if (copy_from_user(&data, (void __user *) arg, sizeof(data)) ||
+ (data.length <= CCP_MAX_OPTION_LENGTH &&
+ copy_from_user(ccp_option, (void __user *) data.ptr, data.length)))
goto out;
err = -EINVAL;
- if (data.length > CCP_MAX_OPTION_LENGTH
- || ccp_option[1] < 2 || ccp_option[1] > data.length)
+ if (data.length > CCP_MAX_OPTION_LENGTH ||
+ ccp_option[1] < 2 || ccp_option[1] > data.length)
goto out;
cp = try_then_request_module(