Merge tag 'v3.4.108' into mm-6.0
Change-Id: I5ee718e5c87c9647c6edf0926a887679e065a649
Signed-off-by: José Adolfo Galdámez <josegalre@pac-rom.com>
diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index 375756f..348560a 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -424,7 +424,6 @@
"iscsi_host_alloc failed\n");
return NULL;
}
- shost->dma_boundary = pcidev->dma_mask;
shost->max_id = BE2_MAX_SESSIONS;
shost->max_channel = 0;
shost->max_cmd_len = BEISCSI_MAX_CMD_LEN;
@@ -4399,9 +4398,9 @@
hba_free:
if (phba->msix_enabled)
pci_disable_msix(phba->pcidev);
- iscsi_host_remove(phba->shost);
pci_dev_put(phba->pcidev);
iscsi_host_free(phba->shost);
+ pci_set_drvdata(pcidev, NULL);
disable_pci:
pci_disable_device(pcidev);
return ret;
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index bc88cab..f5ccdcdf 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -3507,10 +3507,6 @@
/* Save the PCI command register */
pci_read_config_word(pdev, 4, &command_register);
- /* Turn the board off. This is so that later pci_restore_state()
- * won't turn the board on before the rest of config space is ready.
- */
- pci_disable_device(pdev);
pci_save_state(pdev);
/* find the first memory BAR, so we can find the cfg table */
@@ -3534,7 +3530,7 @@
}
rc = write_driver_ver_to_cfgtable(cfgtable);
if (rc)
- goto unmap_vaddr;
+ goto unmap_cfgtable;
/* If reset via doorbell register is supported, use that.
* There are two such methods. Favor the newest method.
@@ -3558,11 +3554,6 @@
goto unmap_cfgtable;
pci_restore_state(pdev);
- rc = pci_enable_device(pdev);
- if (rc) {
- dev_warn(&pdev->dev, "failed to enable device.\n");
- goto unmap_cfgtable;
- }
pci_write_config_word(pdev, 4, command_register);
/* Some devices (notably the HP Smart Array 5i Controller)
@@ -4064,10 +4055,37 @@
static __devinit int hpsa_init_reset_devices(struct pci_dev *pdev)
{
int rc, i;
+ void __iomem *vaddr;
if (!reset_devices)
return 0;
+ /* kdump kernel is loading, we don't know in which state is
+ * the pci interface. The dev->enable_cnt is equal zero
+ * so we call enable+disable, wait a while and switch it on.
+ */
+ rc = pci_enable_device(pdev);
+ if (rc) {
+ dev_warn(&pdev->dev, "Failed to enable PCI device\n");
+ return -ENODEV;
+ }
+ pci_disable_device(pdev);
+ msleep(260); /* a randomly chosen number */
+ rc = pci_enable_device(pdev);
+ if (rc) {
+ dev_warn(&pdev->dev, "failed to enable device.\n");
+ return -ENODEV;
+ }
+ pci_set_master(pdev);
+
+ vaddr = pci_ioremap_bar(pdev, 0);
+ if (vaddr == NULL) {
+ rc = -ENOMEM;
+ goto out_disable;
+ }
+ writel(SA5_INTR_OFF, vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ iounmap(vaddr);
+
/* Reset the controller with a PCI power-cycle or via doorbell */
rc = hpsa_kdump_hard_reset_controller(pdev);
@@ -4076,10 +4094,11 @@
* "performant mode". Or, it might be 640x, which can't reset
* due to concerns about shared bbwc between 6402/6404 pair.
*/
- if (rc == -ENOTSUPP)
- return rc; /* just try to do the kdump anyhow. */
- if (rc)
- return -ENODEV;
+ if (rc) {
+ if (rc != -ENOTSUPP) /* just try to do the kdump anyhow. */
+ rc = -ENODEV;
+ goto out_disable;
+ }
/* Now try to get the controller to respond to a no-op */
dev_warn(&pdev->dev, "Waiting for controller to respond to no-op\n");
@@ -4090,7 +4109,11 @@
dev_warn(&pdev->dev, "no-op failed%s\n",
(i < 11 ? "; re-trying" : ""));
}
- return 0;
+
+out_disable:
+
+ pci_disable_device(pdev);
+ return rc;
}
static __devinit int hpsa_allocate_cmd_pool(struct ctlr_info *h)
@@ -4191,6 +4214,7 @@
iounmap(h->transtable);
if (h->cfgtable)
iounmap(h->cfgtable);
+ pci_disable_device(h->pdev);
pci_release_regions(h->pdev);
kfree(h);
}
diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c
index 629a086..5fbacde 100644
--- a/drivers/scsi/libsas/sas_discover.c
+++ b/drivers/scsi/libsas/sas_discover.c
@@ -446,6 +446,7 @@
struct sas_discovery_event *ev = to_sas_discovery_event(work);
struct asd_sas_port *port = ev->port;
struct sas_ha_struct *ha = port->ha;
+ struct domain_device *ddev = port->port_dev;
/* prevent revalidation from finding sata links in recovery */
mutex_lock(&ha->disco_mutex);
@@ -460,8 +461,9 @@
SAS_DPRINTK("REVALIDATING DOMAIN on port %d, pid:%d\n", port->id,
task_pid_nr(current));
- if (port->port_dev)
- res = sas_ex_revalidate_domain(port->port_dev);
+ if (ddev && (ddev->dev_type == SAS_FANOUT_EXPANDER_DEVICE ||
+ ddev->dev_type == SAS_EDGE_EXPANDER_DEVICE))
+ res = sas_ex_revalidate_domain(ddev);
SAS_DPRINTK("done REVALIDATING DOMAIN on port %d, pid:%d, res 0x%x\n",
port->id, task_pid_nr(current), res);
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index ac99b46..a30f7a0 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1209,9 +1209,11 @@
"rejecting I/O to dead device\n");
ret = BLKPREP_KILL;
break;
- case SDEV_QUIESCE:
case SDEV_BLOCK:
case SDEV_CREATED_BLOCK:
+ ret = BLKPREP_DEFER;
+ break;
+ case SDEV_QUIESCE:
/*
* If the devices is blocked we defer normal commands.
*/
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index eacd46b..fb119ce 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -498,7 +498,7 @@
sg_new_read(Sg_fd * sfp, char __user *buf, size_t count, Sg_request * srp)
{
sg_io_hdr_t *hp = &srp->header;
- int err = 0;
+ int err = 0, err2;
int len;
if (count < SZ_SG_IO_HDR) {
@@ -527,8 +527,8 @@
goto err_out;
}
err_out:
- err = sg_finish_rem_req(srp);
- return (0 == err) ? count : err;
+ err2 = sg_finish_rem_req(srp);
+ return err ? : err2 ? : count;
}
static ssize_t
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index 36d1ed7..1e3d789 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -1609,7 +1609,7 @@
struct pci_bus_region bus_addr;
int i = 2;
- pcibios_resource_to_bus(pdev, &bus_addr, &pdev->resource[1]);
+ pcibios_resource_to_bus(pdev->bus, &bus_addr, &pdev->resource[1]);
device->mmio_base = bus_addr.start;
if (device->chip.features & FE_RAM) {
@@ -1619,7 +1619,8 @@
*/
if (!pdev->resource[i].flags)
i++;
- pcibios_resource_to_bus(pdev, &bus_addr, &pdev->resource[i]);
+ pcibios_resource_to_bus(pdev->bus, &bus_addr,
+ &pdev->resource[i]);
device->ram_base = bus_addr.start;
}