| /* | 
 |  *  include/asm-s390/ccwdev.h | 
 |  *  include/asm-s390x/ccwdev.h | 
 |  * | 
 |  *    Copyright (C) 2002 IBM Deutschland Entwicklung GmbH, IBM Corporation | 
 |  *    Author(s): Arnd Bergmann <arndb@de.ibm.com> | 
 |  * | 
 |  *  Interface for CCW device drivers | 
 |  */ | 
 | #ifndef _S390_CCWDEV_H_ | 
 | #define _S390_CCWDEV_H_ | 
 |  | 
 | #include <linux/device.h> | 
 | #include <linux/mod_devicetable.h> | 
 |  | 
 | /* structs from asm/cio.h */ | 
 | struct irb; | 
 | struct ccw1; | 
 |  | 
 | /* simplified initializers for struct ccw_device: | 
 |  * CCW_DEVICE and CCW_DEVICE_DEVTYPE initialize one | 
 |  * entry in your MODULE_DEVICE_TABLE and set the match_flag correctly */ | 
 | #define CCW_DEVICE(cu, cum) 						\ | 
 | 	.cu_type=(cu), .cu_model=(cum),					\ | 
 | 	.match_flags=(CCW_DEVICE_ID_MATCH_CU_TYPE			\ | 
 | 		   | (cum ? CCW_DEVICE_ID_MATCH_CU_MODEL : 0)) | 
 |  | 
 | #define CCW_DEVICE_DEVTYPE(cu, cum, dev, devm)				\ | 
 | 	.cu_type=(cu), .cu_model=(cum), .dev_type=(dev), .dev_model=(devm),\ | 
 | 	.match_flags=CCW_DEVICE_ID_MATCH_CU_TYPE			\ | 
 | 		   | ((cum) ? CCW_DEVICE_ID_MATCH_CU_MODEL : 0) 	\ | 
 | 		   | CCW_DEVICE_ID_MATCH_DEVICE_TYPE			\ | 
 | 		   | ((devm) ? CCW_DEVICE_ID_MATCH_DEVICE_MODEL : 0) | 
 |  | 
 | /* scan through an array of device ids and return the first | 
 |  * entry that matches the device. | 
 |  * | 
 |  * the array must end with an entry containing zero match_flags | 
 |  */ | 
 | static inline const struct ccw_device_id * | 
 | ccw_device_id_match(const struct ccw_device_id *array, | 
 | 			const struct ccw_device_id *match) | 
 | { | 
 | 	const struct ccw_device_id *id = array; | 
 |  | 
 | 	for (id = array; id->match_flags; id++) { | 
 | 		if ((id->match_flags & CCW_DEVICE_ID_MATCH_CU_TYPE) | 
 | 		    && (id->cu_type != match->cu_type)) | 
 | 			continue; | 
 |  | 
 | 		if ((id->match_flags & CCW_DEVICE_ID_MATCH_CU_MODEL) | 
 | 		    && (id->cu_model != match->cu_model)) | 
 | 			continue; | 
 |  | 
 | 		if ((id->match_flags & CCW_DEVICE_ID_MATCH_DEVICE_TYPE) | 
 | 		    && (id->dev_type != match->dev_type)) | 
 | 			continue; | 
 |  | 
 | 		if ((id->match_flags & CCW_DEVICE_ID_MATCH_DEVICE_MODEL) | 
 | 		    && (id->dev_model != match->dev_model)) | 
 | 			continue; | 
 |  | 
 | 		return id; | 
 | 	} | 
 |  | 
 | 	return NULL; | 
 | } | 
 |  | 
 | /* The struct ccw device is our replacement for the globally accessible | 
 |  * ioinfo array. ioinfo will mutate into a subchannel device later. | 
 |  * | 
 |  * Reference: Documentation/s390/driver-model.txt */ | 
 | struct ccw_device { | 
 | 	spinlock_t *ccwlock; | 
 | 	struct ccw_device_private *private;	/* cio private information */ | 
 | 	struct ccw_device_id id;	/* id of this device, driver_info is | 
 | 					   set by ccw_find_driver */ | 
 | 	struct ccw_driver *drv;		/* */ | 
 | 	struct device dev;		/* */ | 
 | 	int online; | 
 | 	/* This is sick, but a driver can have different interrupt handlers  | 
 | 	   for different ccw_devices (multi-subchannel drivers)... */ | 
 | 	void (*handler) (struct ccw_device *, unsigned long, struct irb *); | 
 | }; | 
 |  | 
 |  | 
 | /* Each ccw driver registers with the ccw root bus */ | 
 | struct ccw_driver { | 
 | 	struct module *owner;		/* for automatic MOD_INC_USE_COUNT   */ | 
 | 	struct ccw_device_id *ids;	/* probe driver with these devs      */ | 
 | 	int (*probe) (struct ccw_device *); /* ask driver to probe dev 	     */ | 
 | 	void (*remove) (struct ccw_device *); | 
 | 					/* device is no longer available     */ | 
 | 	int (*set_online) (struct ccw_device *); | 
 | 	int (*set_offline) (struct ccw_device *); | 
 | 	int (*notify) (struct ccw_device *, int); | 
 | 	struct device_driver driver;	/* higher level structure, don't init | 
 | 					   this from your driver	     */ | 
 | 	char *name; | 
 | }; | 
 |  | 
 | extern struct ccw_device *get_ccwdev_by_busid(struct ccw_driver *cdrv, | 
 | 					      const char *bus_id); | 
 |  | 
 | /* devices drivers call these during module load and unload. | 
 |  * When a driver is registered, its probe method is called | 
 |  * when new devices for its type pop up */ | 
 | extern int  ccw_driver_register   (struct ccw_driver *driver); | 
 | extern void ccw_driver_unregister (struct ccw_driver *driver); | 
 |  | 
 | struct ccw1; | 
 |  | 
 | extern int ccw_device_set_options(struct ccw_device *, unsigned long); | 
 |  | 
 | /* Allow for i/o completion notification after primary interrupt status. */ | 
 | #define CCWDEV_EARLY_NOTIFICATION	0x0001 | 
 | /* Report all interrupt conditions. */ | 
 | #define CCWDEV_REPORT_ALL	 	0x0002 | 
 | /* Try to perform path grouping. */ | 
 | #define CCWDEV_DO_PATHGROUP             0x0004 | 
 | /* Allow forced onlining of boxed devices. */ | 
 | #define CCWDEV_ALLOW_FORCE              0x0008 | 
 |  | 
 | /* | 
 |  * ccw_device_start() | 
 |  * | 
 |  *  Start a S/390 channel program. When the interrupt arrives, the | 
 |  *  IRQ handler is called, either immediately, delayed (dev-end missing, | 
 |  *  or sense required) or never (no IRQ handler registered). | 
 |  *  Depending on the action taken, ccw_device_start() returns:   | 
 |  *                           0	     - Success | 
 |  *			     -EBUSY  - Device busy, or status pending | 
 |  *			     -ENODEV - Device not operational | 
 |  *                           -EINVAL - Device invalid for operation | 
 |  */ | 
 | extern int ccw_device_start(struct ccw_device *, struct ccw1 *, | 
 | 			    unsigned long, __u8, unsigned long); | 
 | /* | 
 |  * ccw_device_start_timeout() | 
 |  * | 
 |  * This function notifies the device driver if the channel program has not | 
 |  * completed during the specified time. If a timeout occurs, the channel | 
 |  * program is terminated via xsch(), hsch() or csch(). | 
 |  */ | 
 | extern int ccw_device_start_timeout(struct ccw_device *, struct ccw1 *, | 
 | 				    unsigned long, __u8, unsigned long, int); | 
 | /* | 
 |  * ccw_device_start_key() | 
 |  * ccw_device_start_key_timeout() | 
 |  * | 
 |  * Same as ccw_device_start() and ccw_device_start_timeout(), except a | 
 |  * storage key != default key can be provided for the I/O. | 
 |  */ | 
 | extern int ccw_device_start_key(struct ccw_device *, struct ccw1 *, | 
 | 				unsigned long, __u8, __u8, unsigned long); | 
 | extern int ccw_device_start_timeout_key(struct ccw_device *, struct ccw1 *, | 
 | 					unsigned long, __u8, __u8, | 
 | 					unsigned long, int); | 
 |  | 
 |  | 
 | extern int ccw_device_resume(struct ccw_device *); | 
 | extern int ccw_device_halt(struct ccw_device *, unsigned long); | 
 | extern int ccw_device_clear(struct ccw_device *, unsigned long); | 
 |  | 
 | extern int read_dev_chars(struct ccw_device *cdev, void **buffer, int length); | 
 | extern int read_conf_data(struct ccw_device *cdev, void **buffer, int *length); | 
 | extern int read_conf_data_lpm(struct ccw_device *cdev, void **buffer, | 
 | 			      int *length, __u8 lpm); | 
 |  | 
 | extern int ccw_device_set_online(struct ccw_device *cdev); | 
 | extern int ccw_device_set_offline(struct ccw_device *cdev); | 
 |  | 
 |  | 
 | extern struct ciw *ccw_device_get_ciw(struct ccw_device *, __u32 cmd); | 
 | extern __u8 ccw_device_get_path_mask(struct ccw_device *); | 
 |  | 
 | #define get_ccwdev_lock(x) (x)->ccwlock | 
 |  | 
 | #define to_ccwdev(n) container_of(n, struct ccw_device, dev) | 
 | #define to_ccwdrv(n) container_of(n, struct ccw_driver, driver) | 
 |  | 
 | extern struct ccw_device *ccw_device_probe_console(void); | 
 |  | 
 | // FIXME: these have to go | 
 | extern int _ccw_device_get_device_number(struct ccw_device *); | 
 | extern int _ccw_device_get_subchannel_number(struct ccw_device *); | 
 |  | 
 | extern void *ccw_device_get_chp_desc(struct ccw_device *, int); | 
 | #endif /* _S390_CCWDEV_H_ */ |