)]}'
{
  "commit": "90950a2504b66d626a73f55ca949a2e79ff4b7c4",
  "tree": "bba82b47c30ba97e3baacf8642d44e2ae1867d40",
  "parents": [
    "ff7cddf59e3618d29e12b061651ab3f5a53f4a98"
  ],
  "author": {
    "name": "Robert Hancock",
    "email": "hancockrwd@gmail.com",
    "time": "Sat Sep 12 23:54:47 2009 -0600"
  },
  "committer": {
    "name": "Jeff Garzik",
    "email": "jgarzik@redhat.com",
    "time": "Thu Sep 17 16:46:41 2009 -0400"
  },
  "message": "pata_amd: do not filter out valid modes in nv_mode_filter\n\nOn a Compaq Presario V3000 laptop (NVIDIA MCP51 chipset), pata_amd selects\nPIO0 mode for the PATA DVD-RAM drive instead of MWDMA2 which it supports:\n\nata4.00: ATAPI: HL-DT-ST DVDRAM GSA-4084N, KQ09, max MWDMA2\nata4: nv_mode_filter: 0x39f\u00260x7001-\u003e0x1, BIOS\u003d0x0 (0x0) ACPI\u003d0x7001 (60:600:0x11)\nata4.00: configured for PIO0\n\nFor some reason, the BIOS-set UDMA configuration returns 0 and the ACPI _GTM\nreports that UDMA2 and PIO0 are enabled. This causes nv_mode_filter to end up\nallowing only PIO0 and UDMA0-2. Since the drive doesn\u0027t support UDMA we end up\nusing PIO0.\n\nSince the controllers should always support PIO4, MWDMA2 and UDMA2 regardless\nof what cable type is used, let\u0027s make sure we don\u0027t filter out these modes\nregardless of what wacky settings the BIOS is using.\n\nSigned-off-by: Robert Hancock \u003chancockrwd@gmail.com\u003e\nCc: stable@kernel.org\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "33a74f11171cc15dcc4037796e1eafdf3058be0f",
      "old_mode": 33188,
      "old_path": "drivers/ata/pata_amd.c",
      "new_id": "567f3f72774efd2a821b2a7b24724dc3bdb38077",
      "new_mode": 33188,
      "new_path": "drivers/ata/pata_amd.c"
    }
  ]
}