sh: Kill off the rest of the legacy rtc mess.
With the new RTC class driver, we can get rid of most of the
old left over cruft.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile
index 59d5b74..fb5dac0 100644
--- a/arch/sh/kernel/cpu/Makefile
+++ b/arch/sh/kernel/cpu/Makefile
@@ -8,6 +8,5 @@
obj-$(CONFIG_CPU_SH3) += sh3/
obj-$(CONFIG_CPU_SH4) += sh4/
-obj-$(CONFIG_SH_RTC) += rtc.o
obj-$(CONFIG_UBC_WAKEUP) += ubc.o
obj-$(CONFIG_SH_ADC) += adc.o
diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c
index d2b715a..00edee9 100644
--- a/arch/sh/kernel/cpu/irq/ipr.c
+++ b/arch/sh/kernel/cpu/irq/ipr.c
@@ -124,7 +124,7 @@
#ifndef CONFIG_CPU_SUBTYPE_SH7780
make_ipr_irq(TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY);
make_ipr_irq(TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY);
-#if defined(CONFIG_SH_RTC)
+#ifdef RTC_IRQ
make_ipr_irq(RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY);
#endif
diff --git a/arch/sh/kernel/cpu/rtc.c b/arch/sh/kernel/cpu/rtc.c
deleted file mode 100644
index 4304cf7..0000000
--- a/arch/sh/kernel/cpu/rtc.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * linux/arch/sh/kernel/rtc.c -- SH3 / SH4 on-chip RTC support
- *
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/time.h>
-#include <linux/bcd.h>
-#include <asm/io.h>
-#include <asm/rtc.h>
-
-void sh_rtc_gettimeofday(struct timespec *ts)
-{
- unsigned int sec128, sec, sec2, min, hr, wk, day, mon, yr, yr100, cf_bit;
- unsigned long flags;
-
- again:
- do {
- local_irq_save(flags);
- ctrl_outb(0, RCR1); /* Clear CF-bit */
- sec128 = ctrl_inb(R64CNT);
- sec = ctrl_inb(RSECCNT);
- min = ctrl_inb(RMINCNT);
- hr = ctrl_inb(RHRCNT);
- wk = ctrl_inb(RWKCNT);
- day = ctrl_inb(RDAYCNT);
- mon = ctrl_inb(RMONCNT);
-#if defined(CONFIG_CPU_SH4)
- yr = ctrl_inw(RYRCNT);
- yr100 = (yr >> 8);
- yr &= 0xff;
-#else
- yr = ctrl_inb(RYRCNT);
- yr100 = (yr == 0x99) ? 0x19 : 0x20;
-#endif
- sec2 = ctrl_inb(R64CNT);
- cf_bit = ctrl_inb(RCR1) & RCR1_CF;
- local_irq_restore(flags);
- } while (cf_bit != 0 || ((sec128 ^ sec2) & RTC_BIT_INVERTED) != 0);
-
- BCD_TO_BIN(yr100);
- BCD_TO_BIN(yr);
- BCD_TO_BIN(mon);
- BCD_TO_BIN(day);
- BCD_TO_BIN(hr);
- BCD_TO_BIN(min);
- BCD_TO_BIN(sec);
-
- if (yr > 99 || mon < 1 || mon > 12 || day > 31 || day < 1 ||
- hr > 23 || min > 59 || sec > 59) {
- printk(KERN_ERR
- "SH RTC: invalid value, resetting to 1 Jan 2000\n");
- local_irq_save(flags);
- ctrl_outb(RCR2_RESET, RCR2); /* Reset & Stop */
- ctrl_outb(0, RSECCNT);
- ctrl_outb(0, RMINCNT);
- ctrl_outb(0, RHRCNT);
- ctrl_outb(6, RWKCNT);
- ctrl_outb(1, RDAYCNT);
- ctrl_outb(1, RMONCNT);
-#if defined(CONFIG_CPU_SH4)
- ctrl_outw(0x2000, RYRCNT);
-#else
- ctrl_outb(0, RYRCNT);
-#endif
- ctrl_outb(RCR2_RTCEN|RCR2_START, RCR2); /* Start */
- goto again;
- }
-
-#if RTC_BIT_INVERTED != 0
- if ((sec128 & RTC_BIT_INVERTED))
- sec--;
-#endif
-
- ts->tv_sec = mktime(yr100 * 100 + yr, mon, day, hr, min, sec);
- ts->tv_nsec = ((sec128 * 1000000) / 128) * 1000;
-}
-
-/*
- * Changed to only care about tv_sec, and not the full timespec struct
- * (i.e. tv_nsec). It can easily be switched to timespec for future cpus
- * that support setting usec or nsec RTC values.
- */
-int sh_rtc_settimeofday(const time_t secs)
-{
- int retval = 0;
- int real_seconds, real_minutes, cmos_minutes;
- unsigned long flags;
-
- local_irq_save(flags);
- ctrl_outb(RCR2_RESET, RCR2); /* Reset pre-scaler & stop RTC */
-
- cmos_minutes = ctrl_inb(RMINCNT);
- BCD_TO_BIN(cmos_minutes);
-
- /*
- * since we're only adjusting minutes and seconds,
- * don't interfere with hour overflow. This avoids
- * messing with unknown time zones but requires your
- * RTC not to be off by more than 15 minutes
- */
- real_seconds = secs % 60;
- real_minutes = secs / 60;
- if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
- real_minutes += 30; /* correct for half hour time zone */
- real_minutes %= 60;
-
- if (abs(real_minutes - cmos_minutes) < 30) {
- BIN_TO_BCD(real_seconds);
- BIN_TO_BCD(real_minutes);
- ctrl_outb(real_seconds, RSECCNT);
- ctrl_outb(real_minutes, RMINCNT);
- } else {
- printk(KERN_WARNING
- "set_rtc_time: can't update from %d to %d\n",
- cmos_minutes, real_minutes);
- retval = -1;
- }
-
- ctrl_outb(RCR2_RTCEN|RCR2_START, RCR2); /* Start RTC */
- local_irq_restore(flags);
-
- return retval;
-}
diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c
index 8acd70b..149d971 100644
--- a/arch/sh/kernel/time.c
+++ b/arch/sh/kernel/time.c
@@ -3,13 +3,12 @@
*
* Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
* Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- * Copyright (C) 2002, 2003, 2004, 2005 Paul Mundt
+ * Copyright (C) 2002 - 2006 Paul Mundt
* Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
*
* Some code taken from i386 version.
* Copyright (C) 1991, 1992, 1995 Linus Torvalds
*/
-
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -26,15 +25,20 @@
DEFINE_SPINLOCK(rtc_lock);
EXPORT_SYMBOL(rtc_lock);
-/* XXX: Can we initialize this in a routine somewhere? Dreamcast doesn't want
- * these routines anywhere... */
-#ifdef CONFIG_SH_RTC
-void (*rtc_sh_get_time)(struct timespec *) = sh_rtc_gettimeofday;
-int (*rtc_sh_set_time)(const time_t) = sh_rtc_settimeofday;
-#else
-void (*rtc_sh_get_time)(struct timespec *);
-int (*rtc_sh_set_time)(const time_t);
-#endif
+/* Dummy RTC ops */
+static void null_rtc_get_time(struct timespec *tv)
+{
+ tv->tv_sec = mktime(2000, 1, 1, 0, 0, 0);
+ tv->tv_nsec = 0;
+}
+
+static int null_rtc_set_time(const time_t secs)
+{
+ return 0;
+}
+
+void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time;
+int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time;
/*
* Scheduler clock - returns current time in nanosec units.
@@ -70,7 +74,6 @@
tv->tv_sec = sec;
tv->tv_usec = usec;
}
-
EXPORT_SYMBOL(do_gettimeofday);
int do_settimeofday(struct timespec *tv)
@@ -103,7 +106,6 @@
return 0;
}
-
EXPORT_SYMBOL(do_settimeofday);
/* last time the RTC clock got updated */
@@ -181,7 +183,6 @@
sys_timer->dev.cls = &timer_sysclass;
return sysdev_register(&sys_timer->dev);
}
-
device_initcall(timer_init_sysfs);
void (*board_time_init)(void);
@@ -193,15 +194,9 @@
clk_init();
- if (rtc_sh_get_time) {
- rtc_sh_get_time(&xtime);
- } else {
- xtime.tv_sec = mktime(2000, 1, 1, 0, 0, 0);
- xtime.tv_nsec = 0;
- }
-
- set_normalized_timespec(&wall_to_monotonic,
- -xtime.tv_sec, -xtime.tv_nsec);
+ rtc_sh_get_time(&xtime);
+ set_normalized_timespec(&wall_to_monotonic,
+ -xtime.tv_sec, -xtime.tv_nsec);
/*
* Find the timer to use as the system timer, it will be